4802040020 Ebs trailer control valve - 104878

Distance between bolts:80.0 x 80.0 mm  Electrical connection:Bayonet DIN 72585  Max. operating pressure:8.5 bar  Mounting:3x M8  Port thread 11:M22 x 1.5 JED - 388-4  Port thread 21:M22 x 1.5 JED - 388-0 

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 2.3:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure See Technical Features Pilot Configuration Sealed Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 25 psi Operating Characteristic Semi-restrictive Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Model Weight 0.27 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 5:1 Maximum Recommended Load Pressure at Maximum Setting 4615 psi Maximum Setting 6000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 40 psi Adjustment - No. of CCW Turns from Min. to Max. Setting 5 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.44 lb.

Technical Data  Series 0 Cartridge Thread M16 Valve Hex Size 3/4 in. Valve Installation Torque 20 - 25 lbf ft Cavity T-162A What models can this kit be used with? CDAP Mechanically operated, back-to-back check valve CDAQ Mechanically operated, back-to-back check valve CNAC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check CNBC Free flow nose to side check valve with bypass orifice CSAN Insert style, single ball shuttle valve with signal at port 2 CSAW Single ball shuttle valve with signal external CSAY Single ball shuttle valve with signal at port 2 CXAD Free flow side to nose check valve CXBA Free flow nose to side check valve CXBG Flush mount, free flow nose to side check valve CXBM Insert style, free flow nose to side check valve DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve FCBB Fixed-orifice pressure compensated flow control valve with reverse flow check FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed FQBA Fixed-orifice, flow fuse valve FXBA Fixed-orifice, pressure compensated flow control valve NCBB Fully adjustable needle valve with reverse flow check NFBC Fully adjustable needle valve RDBA Direct-acting relief valve RPCC Pilot-operated, balanced piston relief valve RQCB Kick-down, pilot-operated, balanced piston relief valve XZCA All ports blocked cavity plug XZCC Flush mount, all ports blocked cavity plug XZOA All ports open cavity plug XZOC Flush mount, all ports open cavity plug  

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC) Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 22 watts Maximum Ambient Temperature 122 °F Voltage/Frequency 24 VDC Operating Voltage Range +/- 10% nominal Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Connector Environment Rating IP65/IP67 Solenoid Tube Diameter .75 in. Coil Nut Torque 4.5 lbf in. Model Weight 8.2 oz.

Technical Data  Operating Temperature Range -40 to 230 °F Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 25 Watts Maximum Ambient Temperature 122 °F Resistance at 20º C 1686 ohms ±10% Voltage/Frequency 230 VAC 50/60 Hz Operating Voltage Range +10%/-15% Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Solenoid Tube Diameter .62 in. Coil Nut Torque 4.5 lbf in. Model Weight 0.60 lb. Other models: DTDALCN DTBFMCN DTDFXHN DTBFXHN DTDAMHN DTDAMHV DTAFXHNDSGYXEN DSIHXGN DSCHXHN DSGHXHN DSEHXHN DSCOXCN DSCSXGNDSGHXGN DCECXHN DCEFXXN DCFCXCN DCDCXWN DCCCXXNDPBCLBN DPBDLAN DPCCLAN DPBMLEN DPBMLBN DPBCLDNDFBDXCN DFDA8DN DFCA8DN DFEBXCN DFBGXCN DFEA8DNDKDPLAN DKJRXHN DKFSXHV DKJSXHN DKJPLAN DKDSXHNDKFSXHN DKHSXHN DODSXHN DOFSXHN DOFPLBN DOHSXHNDMDAMAN DMDAXNN DMDAMNV DMDBXAN DMDAMBNDRBRLSN DRBALWN DRBRLNN DRBCLDN DRBALDNDRBOLDN DRBCLAN DRBCLBN DRAXLAN DBAAMCNDNDCXYN DNDCXHN DWDFMAN DWDFXAN DAALXCNDLDFMHN DLDAMHN DLDFMCN DWDAXAN224 DLDFMHN924 DTDFLCN224 DFDADHN224 RBAPXDN224DTDFXCN224 DFCBMCN224 FPHKXEN224 DFBGXHN224 DFCBMHN224DFDAXHN224 DTAFSCN224 DLDFMHN224 DBAFMHN224 DFEAXHN224DTDFMCV224 DLDFXHN224D PRDNXBN224 RBAPMWN224 DMDAMAN924DFDBMHN224 DFCIDCN224 DTDFDHN224 DMDAMNN224 DWDFXAN224PRDLMDN224 DWDFMAV224 PRDPMDN224 FREPXCN912 DFBGMHN224DFEAMHN224 DFFALCN224 FPCHXAN224 DTDAMHN224 RBAPXAN224DLDFMCN224 FPCCXCN224 DTAFMCN224  

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings