Elektrische geräte & komponenten Großhandel auf Qoovee Market

Description Cable cutter with a particularly light stroke and eccentric drive on needle bearings for daily use for cutting cables up to 45 mm in diameter. Especially durable tool

Pushbutton and Intrinsically Safe Switches with Sterling Silver Contacts

Posts PKU 15, (for 2-row buttons) Ip40-IP 54.65

Communication cables

Combo CCTV Cables

Cables for data transmission (analogue LiYY) Cables KDVVG (analogue LiYY) are used as a control, signal cable for transmitting analog and digital signals in measuring, control electronic devices and computer systems with operating voltages up to 250 V with frequency up to 3 kHz AC or operating voltage up to 350 V DC. According to its properties and characteristics, the cable is a complete analogue of LiYY . (Analogue of LiYY) KDVVG new - a small-sized cable with stranded copper conductors with a cross-section of 0.25, 0.50, 0.75, 1.0 and 1.5 mm², conductor class 5 (cross-section 0.35 - class 4) twisted into a bundle ... Insulation and sheath made of PVC compound. Core colors (in accordance with DIN 47100): white, brown, green, yellow, gray, pink, blue, red, black, purple, gray-pink, red-blue.

Life-saving ring KSP-01 with a line of 18 meters

Power extensions on reel, on frame and on coil

Production of surge protectors under the Power Cube / CUB trademark has been carried out by our company since 1999. The share of our products in the Russian market is over 15%. The main advantages of our surge protectors: Made in Russia, which means do not depend on currency fluctuations The full production cycle allows you to keep high quality products Use of non-toxic and non-flammable plastic Compliance with GOST requirements < / li>

LED Spotlights

EXTENSION CORD WITH PLUG SOCKET Nom.current 10A, 220 V Plug socket without grounding Wire color - orange

EXTENSION CORD ON PLASTIC COIL Rated current 10A, 220V Plug socket without grounding Wire color- orange

The brackets are made of 1.5mm thick sheet steel and painted black with powder paint. One bracket accepts one or two power supplies, depending on the bracket model. The power supplies are attached to the bracket using two adapter brackets. The corners are screwed to the lugs of the radiators of the power supplies located closer to the front panel of the device. Each radiator bump has two M4 threaded holes. The bracket is screwed in with two M4x10 screws. Further, these corners together with the power supply are screwed to the bracket with M4x10 screws. To do this, in the plane of the corner facing the bracket, there are two holes with M4 threads. Sketches of the brackets with dimensions and drawings explaining the installation of the power supplies on the bracket are included.

The power supply is designed to provide uninterrupted power supply of electronic equipment, security and fire alarm systems, video surveillance, radio communications and communication repeaters - with stabilized constant voltage of 13.6 V and current up to 10A. Ideal for powering fire alarm and video surveillance systems, as well as other electronic equipment where uninterruptible power supply is required. The power supply is installed in a metal box, which provides space for a battery with a capacity of up to 12 Ah. The degree of protection of the power supply according to GOST 15254 (IEC 529) is IP20. The source belongs to class 1 of protection against electric shock according to GOST IEC 60950-1 and GOST IEC 61204-7. The source design meets the fire safety requirements in accordance with GOST 12.1.004. Type of climatic modification UHL 2 in accordance with GOST 15150.

The DC / AC-24/12 voltage converter is designed to power dome cameras or other electronic equipment in the TREK power supply system, with an alternating voltage of 24V, with a power consumption of up to 40W. It can be used in other applications outside the TREC system. The converter is powered from a direct current source with a voltage of 18 to 30V. The DC / AC - 24/24 converter converts direct voltage 24V (18-30V) coming from power sources of the K-307-05 or K-307 series -10 (or similar in parameters) to an alternating (pure sine) voltage - 24V. The converter is implemented on the principle of high-frequency pulse energy conversion and is made without galvanic isolation. According to the degree of protection against environmental influences, the converter is manufactured in the IP65 version according to GOST 14254–96.

Continuous progress in construction involves improvement in electrical installation . A couple of decades ago, almost all cable connections were located in places that, to put it mildly, were not at all intended for this: above the switches or below near the sockets, under the wooden floor, and so on. Of course, this contradicted not only the simplest safety standards but also the elementary aesthetic needs of the end user. Needless to say, such an installation was not entirely reliable and often threatened with a banal fire. At the moment, all connections of the cable are directly in themselves junction boxes , which significantly increases the security cable connections . In addition, nowadays all connections are either soldered or assembled on terminal blocks, and if there are any problems with the connection, you just need to remove the cover from the junction box. Maybe this is not one of the main achievements of the notorious progress, but we now have direct access to all connections. It is quite natural that application plastic junction boxes does not increase the cost of installing electrical wiring , but safety is significantly increased .

Cable ducts (or boxes) (cable duct, junction box, electrical box, electrical box) - plastic products that generally represent a closed profile of rectangular or similar cross-section with a flat base. Designed for installation on any architectural surface (wall, floor, ceiling). Enclose wires and cables in their volume.

The assortment includes insulating tape of seven colors: white, red, blue, yellow, green, black and yellow-green. The length of each roller is 20 meters, width 19 mm, thickness 0.16 mm. Properties of PVC electrical tape: * Breakdown voltage 6000 Volts * Elongation at break 250% * Operating temperature up to -25 (degree Celsius sign) * Resistant to UV rays * Resistant to moisture * Resistant to metal corrosion * Resistant to abrasion

Power cable with aluminum (AVVG) conductive cores, insulation and sheath made of polyvinyl chloride (PVC) plastic compound. Used for laying in the ground (trenches), in rooms (tunnels), channels, collectors, industrial rooms, on cable racks, on bridges, if the cable is not subjected to tensile forces, in an environment with any degree of corrosive activity.

Installation wire PV-1 (PuV) is used for laying stationary networks in buildings and premises. Wire PuV (PV-1) is designed for a voltage of 450 V, withstands voltage up to 1000 V.

Operating voltage 0.66 kV. Operating temperature of the cable: from -40 ° С to + 65 ° С. Relative operating air humidity (at + 35 ° С): up to 98% Laying and installation of cables is carried out at an air temperature not lower than -15 ° C. Minimum bending radius (when laying): 7.5 cable diameters. Construction length for delivery: 50 and 100m (in coils); 500m (on drums)

Pickup needle Igzm-205 / S

Gopro Monopod

16-channel DS-H116G recorder

Exhibition Electrics

Power cable consists of one or more copper or aluminum conductors in a special insulated protective sheath. Such cables are intended for transporting electricity from a source to a consumer or inside power systems of varying complexity. Depending on the insulation material used, the power cable is classified into several types of insulation: impregnated paper insulation; plastic insulation; XLPE insulation. XLPE copper or aluminum power cable is used for the transportation and distribution of electricity in stationary power systems with alternating currents (frequency 50 Hz) with a voltage of 10, 20 or 35 kV. cable marked PvPu , APvP , APvPu is used when laying in the earth's soil, independent of the corrosiveness of the soil.

Concrete heating station SPB-63 < span style= " font-family: tahoma, geneva,sans-serif;">At the current fast pace of construction, it is necessary to observe the exact schedule of technological work, but sometimes this is not possible due to adverse weather conditions, and sometimes the time of natural solidification just wants to speed up. This is especially true for zero-cycle works and foundations that harden quickly in warm and hot weather, but slow down their rate of strength gain in the wet and frosty period. Here comes the transformer < strong>concrete heating station SPB-63< / strong>.< / span>< / span>< / p> < span style= " font-family: tahoma, geneva,sans-serif;">The method of its use is simple: special heating wires of PNSV are laid in the frame of the concreted part of the structure, and then the solution is poured.An electric current is supplied through the wires from the station, which leads to the heating of the concrete and the rapid strength gain of the entire reinforced concrete structure.< / span>< / span>< / p>There are many ways to heat concrete, but the most practical and effective today is the electric method.Let's take a closer look at the transformer < strong>concrete heating station SPB-63.< / span>< / p>Scope of application – any capital construction.The station is available in two versions – with copper and aluminum transformer windings.< / span>< / span>< / p> < span style= "font-family: tahoma, geneva, sans-serif;" >The equipment is convenient to use and transport, safe, reliable, passes strict quality control and has an international certificate.What is the advantage of this concrete heating station?: unlike the SPB-20 and SPB-40, it has an increased load capacity;< / span>< / span>< / li> increased service life compared to the above devices< / span>< / span>< / li> at subzero temperatures, it allows you to warm up the soil. Technical Specifications SPB-63 (Al) SPB-63 (Cu) Power supply network 380 V, < p align= "center">50Hz, 3 phase 380 V, < p align= "center">50Hz, 3 phase Load power, kW 63 63 < p>Number of output line voltage stages 4 4 Output line voltage, V 35, 45, 60, 80 35, 45, 60, 80 Load current at any stage, no more than, A 455 455 Operating mode Continuous Continuous Primary power, kW 66 66 Weight, kg 330 360 < p>Overall dimensions (lxwxh), mm 770x780x1100 770x780x1100 Network cable core cross-section, mm2< / sup>< / p> 25 25 Cross-section of the load wires (from the output terminals of the station), mm2< / sup>< / p> 100(2x50) 100(2x50) Degree of protection IP23 IP23 Air cooling natural natural

UralKabMed cable KBK for outdoor installation. 2x0.5 and 2x.075.

В бухтах по 305 метров. Категория 5е4 пары, жила 0,52Металл: медь

4 pairs core 052 Category 5e (Written on Rostelecom cable)

High-carbon steel wire is intended for making springs, tying bales of cotton products and other purposes. Produced in diameters from 1.6 to 6.0 mm. P low-carbon steel wire for general use complies with TSh 64-15808601-58: 2010. OH wire is supplied: - thermally processed (t / o) and - thermally untreated (t / n) of normal and high accuracy. OH wire is used for the manufacture of metal mesh, construction nails, for tying pipe bundles, boards and other packaged materials during transportation, loading and storage, as well as for fencing and other purposes. OH wire is supplied in coils and coils weighing up to 1.0 tons.

POWER CABLES WITH PLASTIC INSULATION (with aluminum cores in PVC insulation, in a PVC shell for a voltage of 1 kV)AVVG 1x2.5AVVG 2х35AVVG 4x2.5AVVG 5х35AVVG 1x4AVVG 2х50AVVG 4x4AVVG 5х70AVVG 1x6AVVG 2(1x2,5)coolantAVVG 4x6AVVG 5х95AVVG 1x10AVVG 2х70AVVG 4x10AVVG 5x120AVVG 1x16AVVG 3x2.5AVVG 4x16AVVG 3x4+1x2.5AVVG 1x25AVVG 3x4AVVG 4x25AVVG 3x6+1x4AVVG 1х35AVVG 3x6AVVG 4х35AVVG 3x10+1x6AVVG 1х50AVVG 3x10AVVG 4x50AVVG 3х16+1x10AVVG 1х70AVVG 3х16AVVG 4х70AVVG 3x25+1x16AVVG 1х95AVVG 3x25AVVG 4х95AVVG 3х35+1x16AVVG 1х120AVVG 3х35AVVG 4х120AVVG 3x50+1x25AVVG 1х150AVVG 3x50AVVG 4x150AVVG 3х70+1х35AVVG 1х185AVVG 3х70AVVG 4х185AVVG 3х95+1х50AVVG 1х240AVVG 3х95AVVG 4х240AVVG 3х120+1х70AVVG 2x2.5AVVG 3х120AVVG 5x2.5AVVG 3х150+1х70AVVG 2x4AVVG 3х150AVVG 5x4AVVG 3х185+1х95AVVG 2x6AVVG 3х185AVVG 5x6AVVG 3х240+1х120AVVG 2x10AVVG 3х240AVVG 5x10 AVVG 2x16AVVG 1х400AVVG 5x16 AVVG 2x25AVVG 5х150AVVG 5x25 < / td>< / tr>< / tbody>< / table>(with aluminum cores in PVC insulation, in a non-flammable PVC shell, for a voltage of 1 kV)AVVG 1x2.5ngAVVG 3x2.5ngAVVG 4х6нгAVVG 5х16нгAVVG 1х4нгAVVG 3х4нгAVVG 4х10нгAVVG 5х25нгAVVG 1х6нгAVVG 3х6нгAVVG 4х16нгAVVG 5х35нгAVVG 1х10нгAVVG 3х10нгAVVG 4х25нгAVVG 3x4+1x2.5ngAVVG 1х16нгAVVG 3х16нгAVVG 4х35нгAVVG 3x6+1х4нгAVVG 1х25нгAVVG 3х25нгAVVG 4х50нгAVVG 3x10+1х6нгAVVG 1х35нгAVVG 3х35нгAVVG 4х70нгAVVG 3х16+1х10нгAVVG 1х50нгAVVG 3х50нгAVVG 4х95нгAVVG 3x25+1х16нгAVVG 2x2.5ngAVVG 3х70нгAVVG 4х120нгAVVG 3х35+1х16нгAVVG 2х4нгAVVG 3х95нгAVVG 4х150нгAVVG 3x50+1х25нгAVVG 2х6нгAVVG 3х120нгAVVG 4х185нгAVVG 3х70+1х35нгAVVG 2х10нгAVVG 3х150нгAVVG 4х240нгAVVG 3х95+ 1х50нгAVVG 2х16нгAVVG 3х185нгAVVG 5x2.5ngAVVG 3х120+1х70нгAVVG 2х25нгAVVG 3х240+1х120нгAVVG 5х4нгAVVG 3х150+1х70нгAVVG 2х35нгAVVG 4x2.5ngAVVG 5х6нгAVVG 3х185+1х95нгAVVG 2х50нгAVVG 4х4нгAVVG 5х10нг POWER CABLES WITH PLASTIC INSULATION(with copper conductors, PVC insulated, PVC sheathed to voltage 1 kV) VVG 1x1.5VVG 2x25VVG 3x2,5+1x1,5VVG 4х70VVG 1x2.5VVG 2х35VVG 3x4+1x2.5VVG 4х95VVG 1x4VVG 2х50VVG 3x6+1x4VVG 4х120VVG 1x6VVG 2х95VVG 3x10+1x6VVG 4x150VVG 1x10VVG 2x120VVG 3х16+1x10VVG 4х185VVG 1x16VVG 2х150VVG 3x25+1x16VVG 4х240VVG 1x25VVG 2х185VVG 3х35+1x16VVG 5x1.5VVG 1х35VVG 2х240VVG 3x50+1x25VVG 5x2.5VVG 1х50VVG 3x1.5VVG 3х70+1х35VVG 5x4VVG 1х70VVG 3x2.5VVG 3х95+1х50VVG 5x6VVG 1х95VVG 3x4VVG 3х120+1х70VVG 5x10VVG 1х120VVG 3x6VVG 3х150+1х70VVG 5x16VVG 1х150VVG 3x10VVG 3х185+1х95VVG 5x25VVG 1х185VVG 3х16VVG 3х240+1х120VVG 5х35VVG 1х240VVG 3x25VVG 4x1,5VVG 5x50VVG 2x1.5VVG 3х35VVG 4x2.5VVG 5х70VVG 2x2.5VVG 3x50VVG 4x4VVG 5х95VVG 2x4VVG 3х70VVG 4x6VVG 5x120VVG 2x6VVG 3х95VVG 4x10VVG 5х150VVG 2x10VVG 3х120VVG 4x16 VVG 2x16VVG 3х150VVG 4x25 VVG 3х185VVG 4х35 VVG 3х240VVG 4x50 < / td>< / tr>< / table>(with copper cores in PVC insulation, in a non-flammable PVC shell, for a voltage of 1 kV)VVG 1x1.5 ng3x6 VVG ngVVG 3х185+1х95нгVVG 5х35нгVVG 1x2.5 ng3x10 VVG ngVVG 3х240+1х120нгVVG 5х50нг1x4 VVG ng3х16 VVG ngVVG 4x1,5ngVVG 5х70нг1x6 VVG ng3x25 VVG ngVVG 4x2.5ngVVG 5х95нг1x10 VVG ng3х35 VVG ngVVG 4х4нгVVG 5х120нгVVG 1x16 ngVVG 3x50 ngvvg 4x6ngvvg 5x150ngvvg 1x25 ngvvg 3x70 ngVVG 4x10ngVVG NG-LS 3x2. 5< / tr>VVG 1x35 ngVVG 3x95 ngVVG 4x16ngVVG NG-LS 2x4< / tr>VVG 1x50 ngVVG 3x120 ngVVG 4x25ngVVG NG-LS 3x10< / tr>VVG 1x70 ngVVG 3x150 ngVVG 4x35ngVVG NG-LS 4x16< / tr>VVG 1x150 ngVVG 3x185 ngVVG 4x50ngVVG NG-LS 3x35+1x25< / tr>VVG 1x240 ngvvg 3x240 ngvvg 4x70ngVVG NG-LS 4x4< / tr>VVG 2x1. 5 ng< / td>VVG 3x2. 5+1x1. 5 ngVVG 4x95ngVVG NG-LS 4x1. 5< / tr>VVG 2x2. 5 ng< / td>VVG 3x4+1x2. 5ngVVG 4x120ngVVG NG-LS 5x2,5VVG 2x4 ngVVG 3x6+1x4ngVVG 4x150ngVVGZ 2x2,5VVG 2x6 ngVVG 3x10+1x6ngvvg 4x185ngVVGz 3x2. 5VVG 2x10 ngVVG 3х16+1х10нгVVG 4х240нгWGS 4x16-12x16 VVG ngVVG 3x25+1х16нгVVG 5x1.5ngWGS 4x10-12x25 VVG ngVVG 3х35+1х16нгVVG 5x2.5ngWGS 4x6-12х35 VVG ngVVG 3x50+1х25нгVVG 5х4нгWGS 5x62х50 VVG ngVVG 3х70+1х35нгVVG 5х6нгWGS 2x10-1VVG 3x1.5 ngVVG 3х95+1х50нгVVG 5х10нгWGS 2x6-1VVG 3x2.5 ngVVG 3x120+1x70ngVVG 5x16ngVVGZ 3x10+1x6VVG 3x4 ngVVG 3x150+1x70ngVVG 5x25ngVVGZ 3x95+1x50(with copper cores in PVC insulation, in a non-combustible PVC shell with filling)VVG 2x1.5 NGZVVG 3x4 NGZVVG 4x10VVG 3х35+1x16VVG 2x2.5 NGZVVG 3x6 NGZVVG 4x16VVG 3x50+1x25VVG 2x4 NGZVVG 3x10 NGZVVG 4x25VVG 5x2,5VVG 2x6 NGZVVG 3х16 NGZVVG 4х35VVG 5x6VVG 2x10 NGZVVG 3x25 NGZVVG 4x50VVG 5x10VVG 2x16 NGZVVG 3х35 NGZVVG 3x2,5+1x1,5VVG 5x25VVG 2x25 NGZVVG 3x50 NGZVVG 3x4+1x2.5VVG 5х35VVG 2х35 NGZVVG 4x1,5 NGZVVG 3x6+1x4VVG 5x50VVG 2х50 NGZVVG 4x2.5 NGZVVG 3x10+1x6VVG 5x16VVG 3x1.5 NGZVVG 4x4 NGZVVG 3х16+1x10 VVG 3x2.5 NGZVVG 4x6 NGZVVG 3x25+1x16 We have a very wide range Application: For transmission and distribution of electricity in stationary installations with a rated alternating voltage of 0 , 66 kV and 1 kV with a frequency of 50 Hz. Single-core cables are used in DC networks. Laying conditions: For laying in the ground (trenches), rooms, canals, tunnels, mines, and so in the open air if the cable is not subjected to significant tensile forces. But if there is a danger of mechanical damage during operation. Technical data: Operating voltage, kV 0.66 or 1 Operating temperature of cables, degrees from -50 up to +50 Minimum bending radius, diam. cables: 7.5 Cables are laid at a temperature (without preheating), C not lower than -15

< strong>CONTROL CABLES(with copper cores in PVC insulation, in PVC shell) KVVG 4x0,75KVVG 10x1.0KVVG 27х1.5KVVG 7x4,0KVVG 5x0,75KVVG 14x1,0KVVG 37х1.5KVVG 10х4,0KVVG 7x0,75KVVG 19x1,0KVVG 4x2.5KVVG 4x6,0KVVG 10x0,75KVVG 27х1,0KVVG 5x2.5KVVG 7x6,0KVVG 14х0,75KVVG 37х1,0KVVG 7x2.5KVVG 10x6,0KVVG 19х0,75KVVG 4x1.5KVVG 10x2.5KVVG 8x1,5KVVG 24х0,75KVVG 5x1.5KVVG 14x2.5KVVG 18x1,5KVVG 27х0,75KVVG 7h1.5KVVG 19х2.5KVVG 24х1,5KVVG 4x1,0KVVG 10x1.5KVVG 27х2.5KVVG 30х1,5KVVG 5x1.0KVVG 14x1.5KVVG 37х2.5KVVG 12x1,5 with flexible residentialKVVG 7h1.0KVVG 19x1.5KVVG 4x4,0KVVG 7x2,5 flexible residentialKvvgng 4x0,75Kvvgng 7x1.0Kvvgng 14x1.5Kvvgng 27x2.5Kvvgng 5x0,75KVVG ^10x1.0Kvvgng 19x1.5Kvvgng 37x2.5KVVG нг7х0,75Kvvgng 14x1,0KVVG No. 27x1.5Kvvgng 4x4,0Kvvgng 10x0,75Kvvgng 19x1,0Kvvgng 37x1.5Kvvgng 7x4,0Kvvgng 14x0,75Kvvgng 27x1,0Kvvgng 4x2.5Kvvgng 10x4,0Kvvgng 19x0,75Kvvgng 37x1,0Kvvgng 5x2.5Kvvgng 4x6,0Kvvgng 27x0,75Kvvgng 4x1.5Kvvgng 7x2.5Kvvgng 7x6,0Kvvgng 37x0,75Kvvgng 5x1.5Kvvgng 10x2.5Kvvgng 10x6,0Kvvgng 4x1,0Kvvgng 7x1.5Kvvgng 14x2.5 Kvvgng 5x1.0Kvvgng 10x1.5KVVG No. 19x2.5 (with copper conductors, PVC insulated, PVC sheathed, screened)KVVGE 4x1. 5KVVGE 7x6. 0KVVGE 27x1.5kuuga of 2x6kuuga of 4x2.5kuuga 10x1.5kuuga 27x2.5kuuga 4x1. 0kuuga 4x4,0kuuga 10x2.5kuuga 37x1.5kuuga 7x1,0kuuga of 4x6,0kuuga 10x4,0kuuga 37x2.5kuuga 10x1,0kuuga 5x1.5kuuga 10x6,0kuuga 2x1,5kuuga 14x1,0kuuga of 5x2.5kuuga 14x1.5kuuga 8x1,5kuuga 19x1,0kuuga 7h1.5kuuga 14x2.5kuuga 24x1,5kuuga 27x1,0kuuga 7x2.5KVVGE 19x1.5KVVGE 8x2.5 KVVGE 7x4. 0KVVGE 19x2. 5KVVGE 24x2. 5 (with copper cores in PVC insulation,in a non-flammable PVC shell, shielded)Kvvgeng 4x0,75Kvvgeng 14x1,5Kvvgeng 19x2,5Kvvgeng 10x6Kvvgeng 7x0,75Kvvgeng 19x1,5Kvvgeng 27x2,5Kvvgeng 4x1,0 0,66Kvvgeng 10x0,75Kvvgeng 27x1,5Kvvgeng 37x2,5Kvvgeng 16x2x1,5Kvvgeng 14x0,75Kvvgeng 37x1,5Kvvgeng 4x6Kvvgeng 10x1,00,66Kvvgeng 19х0,75Kvvgeng 4x2,5Kvvgeng 4x4Kvvgeng 27x1,00,66Kvvgeng 4x1. 5KVVGeng 5x2. 5KVVGeng 5x4KVVGeng 7x1. 0 0.66KVVGeng 5x1. 5KVVGeng 7x2. 5KVVGeng 7x4KVVGeng 5x1,0 0.66KVVGeng 7x1,5KVVGeng 10x2,5KVVGeng 7x6 KVVGeng 10x1,5KVVGeng 14x2. 5KVVGeng 10x4 (with copper cores in PVC insulation,in PVC shell, armoured for a voltage of 1 kV)Kvbbshv 4x1. 0Kvbbshv 5x2,5Kvbbshv 14x1,5Kvbbshv 30x1,5Kvbbshv 5x1,0Kvbbshv 7x1,5Kvbbshv 14x2,5VBbShvng 8x1,5Kvbbshv 7x1,0Kvbbshv 7x2,5Kvbbshv 19x1,5VBbShvng 18x1,5Kvbbshv 10x1,0Kvbbshv 7x4,0Kvbbshv 19x2,5VBbShvng 24x1,5КВБбШвШ1,0Kvbbshv 7x6,0Kvbbshv 27x1,5VBbShvng 30x1,5Kvbbshv 19x1,0Kvbbshv 27x1,0KVBBSHV 27x2,5KVBBSHVNG 19x2,5KVBBSHV 4x1,5KVBBSHV 37x1,0KVBBSHV 37x1,5KVBBSHVNG 14x2. 5CVBshw 4x2. 5CVBsHw 10x1. 5CVBsHw 37x2. 5CVBsHwng 4x1. 5CVBsHw 4x4CBBW 10x2. 5CBBW 8x1. 5CBBW 10x1. 5CBBW 4x6CBBW 10x4. 0CBBW 18x1. 5KVBBSHVNG 7x1. 5KVBBSHV 5x1. 5 KVBBSHV 24x1. 5KVBBSHVNG 14x1. 0We have a very wide product range< / p>

Accumulator battery Delta DTM 6045 Characteristics Dimensions Weight, kg: 0.78 Dimensions: 70x47x107 Dimensions (LxWxH): 70x47x107 Other capacity (Ah): 4.5 voltage (V): 6

The PLZ026 module is designed to adjust the power (~ 220V, up to 2 kW) in the load. Two methods of power adjustment - FIM or skipping periods. Designed to adjust power both in resistive loads (heating elements, incandescent lamp) and reactive loads (electric motors). A simistor is used as a control element. Voltage control 0 ... 10V, built-in potentiometer or PWM. Galvanic isolation of control circuits.

Conduit systems, retractable tapes