Industrieanlagen Großhandel auf Qoovee Market

     ANWENDUNG VON OZONATOREN LAGERUNG VON GEMÜSE UND FRÜCHTEN Verwendung von Ozon bei der Kühllagerung von Obst und Gemüse LANDWIRTSCHAFT UND LEBEN Luftdesinfektion in der Geflügelzucht Stimulierung des Wachstums und der Vitalaktivität von Pflanzen und Tieren Imkerei - der Kampf gegen Askopherose Die Verwendung von Ozonisatoren in Gewächshäusern Kampf gegen Pflanzenkrankheiten Getreidehandhabung Erhöhung der Haltbarkeit und Erhaltung der Qualität von Lebensmitteln, Getreide usw. LEBENSMITTELINDUSTRIE Desinfektion von Luft, Räumlichkeiten, Geräten und Produkten mit Ozon Die Verwendung von Ozon in der Fleisch- und Milchindustrie Desinfektion der Lebensmittelproduktion REINIGUNG VON TRINKWASSER UND ABFALL Schwimmbadwasserozonisierung Ozonanwendung zum Abfüllen von Wasser in Flaschen Eisenentfernung und Manganentfernung aus Wasser unter Verwendung einer Ozonierungsstation Aquakultur - Wasseraufbereitung in Aquarien und Fischzucht mit Ozon Abwasserbehandlung WÄSCHEREI, REINIGUNG, GERUCHSENTFERNUNG Hotels, Sanatorien, Landferienhäuser Reinigung und Autowaschanlagen Optimierung der Wäsche Beseitigung hartnäckiger Gerüche von Brennen, Tabak, Farbe und anderen Autowäsche Entfernung von Ölprodukten mit Ozon

Installiert, um Dämpfe effizient und schnell aus Quellen mit hohem Geruchs-, Gas-, Fett- und Feuchtigkeitsgehalt zu entfernen. Hergestellt aus Edelstahl AISI 304, AISI 430 oder verzinktem Stahl.

Hergestellt mit einer Standardlänge von 1250 mm aus kaltgewalztem Stahl mit einer Dicke von 1-1,5 mm.

It is manufactured in standard lengths of 1.25 or 1.5 meters from galvanized steel with a thickness of 0.5-1.0 mm. By special order, it is possible to manufacture air ducts from stainless steel, from steel 1.2 mm, of any section.

Differs in increased rigidity, tightness, air tightness. Made of galvanized steel 0.5-1.0 mm. It is possible to manufacture in lengths from 100 mm to 12000 mm on request.

Es wird in Versorgungs- und Abluftanlagen für Industrie- und öffentliche Gebäude eingesetzt. Entwickelt, um Luft oder andere nicht explosive, nicht aggressive Gasgemische mit Temperaturen von bis zu + 70 ° C zu bewegen, frei von klebrigen Substanzen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m3.

Es wird in Versorgungs- und Abluftanlagen für Industrie- und öffentliche Gebäude eingesetzt. Entwickelt, um Luft oder andere nicht explosive, nicht aggressive Gasgemische mit Temperaturen von bis zu +40 ° C, frei von klebrigen Substanzen und faserigen Materialien, mit einer Konzentration von Staub und anderen festen Verunreinigungen von nicht mehr als 100 mg / m3 zu bewegen.

Supply of shut-off valves, gate valves, ball valves, gates, any construction and other equipment directly from the manufacturer Provision of advisory and other services for the implementation and development in the market of Uzbekistan and Central Asia

electric motor Vilmann Z803-2 1.5 kW 2800 rpm paws new-8.000 rubles electric motor Italy MS90L4 1.5 kW 1400 rpm feet new-8.000 rubles Busch / Siemens electric motor 1.5 kW 1425 rpm small-flange used (small) shaft 24mm-8.000rub electric motor Veg (Weg) 1.5 kW 2885 rpm flange / used paws (small) shaft 24mm-8.500rub Vem electric motor 4.0 kW 1425 rpm used paws (small) -14.000rub Vilmann electric motor 4.0 kW 2895 rpm new paws -14.500rub Siemens 5.5 kW 2915 rpm used flange shaft38mm-14.000 rubles Siemens 5.5 kW 1435 rpm used feet shaft 38mm-15.000 rubles Vem / Siemens / ABB 4.0 kW 1435 rpm used feet-14.000 rubles Siemens 7.5 kW 2910 rpm feet type132 shaft38mm-17.000 rubles Vilmann 7.5 kW 1440 rpm paws 38mm type132 used-13.500 rubles Siemens 3.0 kW 1435 rpm second-hand paws-10.000 rubles KSB / Siemens 3.0 kW 1425 rpm used flange -9.500 rubles Siemens 3.0 kW 1440 rpm new flange-12,000 rubles Mez / Siemens 3.0 kW 1425 rpm used paws-8.000 rpm USSR 3.0 kW 1410 rpm used paws -7,500 rubles ABB 5.5 kW 2885 rpm paws used (bearings need to be replaced) -13.000 rub Siemens 2.2 kW 2885 rpm paws shaft 24mm used - 7.000 rubles USSR 2.2 kW 2885 rpm paws shaft 22mm used (small / super condition!) - 6.500 rubles post-USSR 2.2 kW 2885 rpm paws shaft 22mm used - 6.000 rubles USSR (Uralelectro) 4.0 kW 1410 rpm used feet (bearings that fit) -8.000 rubles Mogilev 3.0 kW 2885 rpm new flange (stored for 15 years) -6.500 rubles Lafert (Spain) 2.2 kW 2895 rpm flange used (not enough) -10.000 rubles Uralelectro ADM 2.2 kW 1410 rpm paws almost new (connected, did not fit in power) -7.500 rubles

Fastening of the axle bridge (bridge-frame) to the emergency tank is carried out by means of two magnetic blocks М250, similar to used in the "Console" unit. The magnetic blocks are hingedly held together to the housing, inside of which the carriage moves along the guides with the sealing unit, which includes a press-screw and a rubber element.The set of delivery includes two types of sealing element: a cone and a gasket with diameters of 20 mm. Replacing one sealing element with another takes no more than 3 seconds.A cone is used to seal round gaps and holes, and a flat gasket is used for cracks or a group of small fistulas. Due to the movements of the carriage relative to the body and the sealing unit relative to the carriage, the sealing element is supplied directly to the leakage.The "aiming" zone is a 50x50 mm square surface. The surface to which the magnetic grippers will be attached is must be cleaned from dirt and coating.Product technical characteristics:Type - Bridge-frame (axle bridge) unitPressing force of the magnetic blocks to the metal surface - Not less than 2 * 250 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmThe maximum diameter of the sealed gap - At a pressure of 60 atm - not less than 7 mmInstallation time, min - 1-2Required number of workers - 1-2Dimensions, mm - 347x111x151Weight, kg - 5.4Service life - At the very least 10 years.

Monoblock unit М180, intended to exclude emergency leaks at relatively low pressures in emergency tanks.Between the magnetic blocks placed screw with a rubber sealing gasket. By applying a screw, the sealing gasket can be moved up or down relative to the unit.The monoblock unit is placed on the damaged container so that the leak will be under the rubber gasket. By rotating the handle, the plate with a rubber gasket is pressed on the defective place until the leak eliminates.The monoblock unit is removed by rotating the same handle in the same direction.Product technical characteristics:Type – Monoblock unitPressing force of the magnetic blocks to the metal surface - Not less than 150 kgfDiameter of the sealed tank (pipeline) - Not less than 400 mmMaximum diameter of the sealed gap - At a pressure of 5 atm - not less than 10 mmInstallation time, min - 0.5Required amount of workers - 1Dimensions, mm - 90x41x90Weight, kg - 0.8Service life - At the very least 10 years.

The K250 console is a permanent magnet device with controlled forceof the gravity. In the "off" condition, the console develops a force of attraction equal to 15-18 kgf. The presence of this force simplifies the installation of the console on the object: the console can be simply "sticked" to the damaged object. The sealing unit is installed on a carriage, which makes it possible to bring the sealing element directly on the leak. The carriage provides the ability to move the sealing unit in the longitudinal direction by a stroke of 15 mm, in the transverse direction - 20 mm and tilt the sealing unit in the longitudinal in the range of angles from 90 to 45 degrees. The set of delivery includes two types of sealing element: a cone and a 20 mm gasket. Replacing one sealing element with another takes just few seconds. A cone made for sealing round holes, and a flat gasket made for cracks or a group of small fistulas. The console is installed near the leak. The surface to which the magnetic block will be attached must be cleaned from dirt and coating. By rotating the handle, the magnetic block is "turned on". The sealing element need to bring to the hole to seal and the leak is can be eliminated by rotating the screw. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 250 kgf Diameter of the sealed tank (pipeline) - Not less than 400 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 10 mm The range of inclination of the sealing unit in the longitudinal plane - From 90 to 45 degrees Installation time, min - 1-2 Required amount of workers - 1-2 Dimensions, mm - 275х121х151 Weight, kg - 3.4 Service life – At the very least 10 years.

The K200 console is intended to eliminate an emergency leak. The console is represents a magnetic block, which is also the hull of the unit. On the block with the help of a bracket fixed sealing unit, which includes a press-screw and a replaceable rubber sealing element. The set of delivery includes two types of sealing elements: a cone with a diameter of 12 mm and a flattened cone with a diameter of 12 mm and 5 mm. The mount allows you to replace one type of sealing element with another in few seconds. Fastening the press-screw to the bracket provides the ability to move the sealing unit in the transverse direction relative to the body by a stroke of ± 2 mm and tilt the sealing unit in the longitudinal plane in the range of angles 5 ° - 60 ° in vertical. Installation and removal of the K200 console carrying out by using a handle. A cone is used to seal round holes, in other cases a flattened cone. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 200 kgf Diameter of the sealed tank (pipeline) - From 80 to 100 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 3 mm Installation time, min - 1 Required amount of workers - 1 Dimensions, mm - 149x96x61 Weight, kg - 0.9 Service life - At the very least 10 years.

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and well workover, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, urea, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler plants, steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: Supply - 1.25-3.2 m3 / hour; Pressure at the outlet of the pump-10 MPa Execution D1 Weight-355 kg Check the cost with the manager! Manufacturer's warranty - 1 year!

electric motor EMC (Italy) MS132S1-2 5.5 kW 2910 rpm new paws - 18.000 rubles many other new and used motors are available call / specify

electric motor Wilmann Z112M2-4 5.5 kW 1435 rpm new paws-17.000 rubles in the presence of many others .. call specify

GDR (USSR) KMR100S4 electric motor 3.0 kW 1430 rpm in good condition-10.000 rubles Siemens / Mez 3.0 kW 1425 rpm second-hand paws-8.000₽ Siemens 3.0 kW1435 rpm second-hand paws - 10.000₽ Siemens 3.0 kW 1435 rpm new flange-12.000₽ Siemens / Vem 4.0 kW 1440 rpm second-hand paws - 14.000₽ USSR 3.0 kW 1410 rpm used flange-7.500₽ USSR 2.2 kW 940 rpm second-hand paws - 5.500₽ VEM 3.0 kW 1440 rpm paws new-12.000₽ ADM (uralelectro) 2.2 kW 1420 rpm paws -7.500₽ Siemens 5.5 kW 2885 rpm flange -14.000₽ Wilmann 7.5 kW 1440 rpm shares used-13.500₽ USSR 2.2 kW 2880 rpm used paws (ideal) -6.500₽ veg 1.5 kW 2885 rpm paws / flange used-8.500₽ USSR (Uralelectro) 4.0 kW 1410 rpm second-hand paws (not very bearings) -8.000₽ Mez / Siemens 5.5 kW 1435 rpm paws -12.000₽ Siemens 4.0 kW 1430 rpm paws on two shafts new-13.000₽ EMC (ITALY) type112 shaft 28mm 5.5 kW 1440 rpm paws new-17.000₽ EMC (ITALY) 7.5 kW 1440 rpm paws new-18.000₽ Brook (england) 5.5 kW 1450 rpm paws new-17.500₽ Wilmann 4.0 kW 2890 rpm paws new-14.000 rubles Wilmann 4.0 kW 2890 rpm second-hand paws - 12.000 rubles Wilmann 5.5 kW 2880 rpm paws new-18.000 rubles NO BIDDING! PRICE FINAL! Don't even try to bargain !!! there are many motors available, we call / check ...

Anwendung: Die Öle in Transformatoren werden hauptsächlich zur Isolierung verwendet, außerdem unterdrücken sie Koronaentladungen und Lichtbögen und wirken auch als Kältemittel in Maschinen. Diese Öle müssen absolut sauber und trocken sein, um optimale Isoliereigenschaften und Durchschlagsfestigkeit zu erreichen und zu erhalten. Hier entsteht die Notwendigkeit einer Transformatorölreinigung. Der ASSEN ZYD Transformer Oil Purifier ist der Schlüssel zur Zuverlässigkeit, Leistung und Haltbarkeit des Transformators. Das Isolieröl des Transformators muss frei von Feuchtigkeit, gelösten Gasen und Partikeln sein, die sich mit der Ölalterung ansammeln. Sogar einige neue Öle müssen möglicherweise verarbeitet werden, um ihren Gehalt auf ein akzeptables Niveau zu begrenzen. Merkmale: 1. Erwartungen an eine effiziente Isolierölaufbereitungsanlage. 2. Geeignet für Ölbehandlung, Ölvakuuminjektion und Heißölkreislauf bei der Installation und Wartung von großen Leistungstransformatoren. 3. Einfacher und störungsfreier Betrieb. 4. Online-Messung und Aufzeichnung von Prozessparametern. Nach der Behandlung Feuchtigkeit PPM 3 Gasgehalt % 0,01 Verunreinigungsgröße µm ≤ 1 (kein freier Kohlenstoff) Durchschlagsspannung kV ≥ 75 IFT dyn / cm ≥ 40 Säurezahl mgKOH / g ≤ 0,03 Dielektrischer Verlustfaktor tan δ (90 ° C) ≤ 0,001 ASSEN garantiert ein gemäß dieser Spezifikation geliefertes Gerät auf Material- und Verarbeitungsfehler bei normalem Gebrauch und Service für einen Zeitraum von sechsundzwanzig (26) Monaten ab Versanddatum oder vierundzwanzig (24) Monaten nach Inbetriebnahme. Systeme. ... Die Verpflichtungen von ASSEN im Rahmen dieser Garantie beschränken sich auf die Reparatur oder Lieferung eines ähnlichen Teils als Ersatz für alle Teile, die sich während der Garantiezeit als defekt erwiesen haben. 1. Wir passen die Maschine nach Ihren Wünschen an. 2. Wir haben über 20 Jahre Exporterfahrung. 3. Wir bieten unseren Kunden qualitativ hochwertige Produkte zu einem wettbewerbsfähigen Preis. 4. Wir bieten unseren Kunden einen hervorragenden After-Sales-Service. 5. Wir sind erst zufrieden, wenn unsere Kunden zufrieden sind.

Brook electric motor (England) WDA112MB-4 112 5.5 kW 1450 rpm feet new shaft 28mm-17.000 rubles Electric motor Wilmann Z112M-2 4.0 kW 2890 rpm paws new-14.000 rubles electric motor Wilmann Z112M2-4 5.5 kW 1435 rpm shaft 28mm-17.000 rubles no bargaining! in the presence of many different motors call / specify

electric motor Wilmann Z112M-2 4.0 kW 2890 rpm paws new shaft 28mm-14.000 rubles without bargaining! in the presence of a large number of motors! call to specify!

Diode bridge VAZ-2110-12 gen. 9402, 9412 (Orbit) Article: BVO 3 105-01 Manufacturer: Orbit

Brazil Santos 100% Arabica is a true classic from Brazil in beans. Perhaps this is the most popular type of coffee, which has a mild pleasant taste with notes of nuts, caramel and chocolate, without acidity. Medium roast. Convenient packaging - a multi-layer quadropack bag with a zipper and a degassing valve - the most perfect packaging for coffee at the moment, not only will it retain its aroma and taste for a long time, but will also make it convenient to pour and store coffee. It is perfect for preparing in a professional or automatic espresso machine, a geyser coffee maker, as well as alternative methods - for example, in a pourover. Below is one of the recipes for brewing this coffee. Espresso recipe: Coffee bookmark: 18 grams. We adjust the grinding so that when it spills for about 27 seconds, 37 grams of the finished drink (from the cream) are obtained at the exit. Store coffee at a temperature no more than 25 degrees and a humidity of no more than 75% in a dry and cool place.

The company strictly implements enterprise standards (CH series hot-melt pipe butt joint machine Q / ZJCH 002-2017; plastic pipe hot-melt butt joint Q / ZJCH 001-2017). The products have been tested by the national authority, and the mechanical properties are rationalized Frequency: 50-60HZ Welding Area: ≤ Pipe wall thickness Dimensions: 1000-1200mm Usage: Plastic Welding,Fitting Warranty: 1 year, 1 Year

Our relation with this estate goes back to the days when our founder (with literally no money) hopped on to bikes and traveled to this estate just to establish a strong direct and transparent bond. Roasting Profile- Espresso Varietal- SLN-795 Altitude- 1524 MASL Process- Washed Harvest Year- 2020-21 Tastes Like- White Chocolate, Hint Of Clove And Caramel Location- Chikmagalur

YH-116AE : Fully Electronic Covering Machine * Taking the highest electronic technology to change from mechanical type into fully automatic computerized operation. * Operation become simple, the consumption of machine parts was reduced noise is less and the data output from the computer is accurate.   Introduction:  Elongation, twisting , tension of take up tube and tension of take up Forming all are taking high technology servo motor with PLC control , Meantime, machine running with gear belt type which has the highest quality.  Machine noise is less and speed increasing due to use gear type belt instead of metal gear.  Using delicate servo motor, the products twisting range can be higher than using metal gear.  Using delicate electrical forming device, the take up tube forming range can be adjusted easily and widely, the forming edge can be softer.  Machine layout: 2500 + (1840 x N) x 1500mm x 2200mm N = No. of section

WE ARE PROVIDING PROJECT BASED OFFERS THEREFORE THE PRICES WERE WRITTEN REPRESENTATIVE. FOR MORE INFORMATION, YOU CAN GET INFORMATION FROM +90 535 718 10 71 PHONE NUMBER.

P01854-3 Features 1. Reducer: Heavy duty machinery reducer. 2. Break System: Pull down the release lever, rolling door will close down. 3. Limited Switch: Combine with 2 limit switch for higher rolling door.   Specification: Model     D20 Horsepower    2HP/1.5kw Poles       4 Voltage    3Ø-220V/380V Ammeter 5.77A/3.34A Load        1800KG/6” Weight    69KG Dimensions     730×290×470 DecelerationRatio  120 RPM 60HZ/14.2RPM Driver Gear / Driven Gear      Double Gear 60×15T→60T Single Gear 80×12T→46T

P00663                          Pai-Hong Sliding Gate Operator (also referred to as slide gate openers or slide gate motors) is suitable for Residential, Commercial and industrial use, command a modernization of convenient lifestyle. The demand for high technology, versatility and reliability is the trend today. If you are looking for a gate operator that manipulate gates by sliding them left or right horizontally along a track a Slide Gate Operator is a great fit for your needs. Worm gear driven with manual override and weatherproof feature ensure long lasting and convenient usage.   For your safety, the safety edge is optional. It will stop and reverse if is encounters an obstruction on closing and stop when it encounters an obstruction on opening.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Founded in 1954 Torin produces quality automotive products for service professionals.

Characteristic: Mixing feeds evenly and making them into grits, which can avoid the waste of feeds, money, time, and size is adjustable. Integrate operation from mixing feeds to making grits means time saving and convenient.   Direction: Pour feeds into the stirring bucket, and mix thoroughly with proper amount of water (or vitamin or other nutriment). After mixing thoroughly (2 ~ 3 minutes), adjust the outlet of the stirring bucket to a proper location and turn on the switch of machine. (With larger outlet, the grain would be longer; with smaller outlet, the grain would be shorter.) With these steps, the manufacture of grain can be accomplished.   Caution: The machine must be cleaned after using. Be aware of losing the oil of variable speed motor.

HDPE Geomembrane Pond Lining If you are interested in this product, please send us your requirements. & nbsp; Feature: < / span> Reduced pond cleaning time, no tillage, increased nesting frequency. Reduce pollution and reduce the risk of disease. More efficient aeration , saving energy. Prevent mixing feed with soil, reducing feed loss. No tillage required, especially suitable for sandy and acidic soils, less lime is used. < span lang = "EN-US"> Water quality can be monitored and improved. < p class = "MsoNormal"> The shrimps could not hide inside the soil during harvest, increase yields and be more productive. One-time investment over 10 years of life.

Feed Size from 0.5~3MM   Characteristic: Double powerful blowing outlets blow feeds far and covers wide area. Single roller distributor can adjust required feeding quantity. Exclusively centrifugal motor. Adopt multi-bladed and aluminum-bladed fan with stable operating. Can be fitted with timer. Applicable for feeding any kind of fish. Stainless steel housing, weather proof and high durability.

Specification: Pressure Performance Table Pressure Performance Curve Noise Level Outline Dimension Structure & Material List Typical Applications   Characteristic: Wide range for air volume, pressure and vacuum. Bore: 25A ~ 300A (1"~12") Capacity: 0.1 ~ 120m3/min. Pressure: 0 ~ 8,000mmAq Vacuum: -5,000mmAq Stable air flow and less pressure variation. Clean air not with oil moist. Solid construction, easy maintenance. Bearings are all lubricated by oil moist, high durability. Made under "ISO9001" system.

SUS316 Material Bore 2" - 8" High Head Large Volume Sea Water Use   Features: Model CT-C pump, pump body, pump up water impeller and enter water access cap, quarry SUS316 cast materials, the axis is a SUS316 material, the mechanical axle seals VFA and VTSIC(Tungsten) material, corrosion-resistant, the stability is high, can give play to extremely high function and lift-span.   Application:  Sea-farming, shipping.

Characteristic: Allowing oxygen transfer into the water quickly. Increase higher efficiency of oxygen transfer, excellent water mixing and circulation pattern. Decomposes harmful material or gas. The circulating water will reactivate with the bottom of the pond, establishing and maintaining a better water quality for the shrimp or fish. Best equipment to be used together with the Paddlewheel Aerator. Farms or ponds, which culture shrimp, fish and any kind of Aquaculture. Treatment for waste water.

Characteristic: Rotation design improves oxygen-content of water, harmful gases escape by water-circulation. Enhance the exchange of gases with the atmosphere and obtains the strongest water current. The unique Aerator Motor Made Under "ISO9001" And "ISO14001" System Suitable for various kind of aquaculture pond : fish, eel, clam, crab, etc.