Industrieanlagen Großhandel auf Qoovee Market

Grid Tie Inverter - 500W to 500 KW Be the first to review this product   98.3% Max efficiency Wide voltage range and low start-up voltage Friendly and adaptable connection to the grid Super high frequency switching technology Precise MPPT algorithm Compact and lightweight WiFi/GPRS Real time monitoring Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection Inbuilt MPPT charge controller extracts upto 30% more power from Panels User friendly Informative LCD Display

We will find machines, equipment, Mini and Large Plants and Factories, bring and install. Quality is our priority

The transformer is designed to power a 6-zone electric ferrite roasting furnace with a vertical load with a maximum power of 84 kVA and a phase voltage of 150V; 200V; 250 V.

The TS-100/10-UHL3-6 / 0.4 transformer is intended for use in alternating current circuits with a frequency of 50 or 60 Hz. SPECIFICATIONS: Rated value of high voltage, kV 6 Low voltage rated value, kV 0.4 Rated power, kVA 100.0 Number of phases 3 Mains frequency, Hz 50 HV D winding connection diagram Connection diagram of the LV windings Yн Insulation temperature class F Temperature protection 3 pt100 sensors in the windings block "Termodat 11M3T1" Cooling natural air Enclosure protection class IP00 Coil material aluminum Overall dimensions, mm: Length 940 Depth 650 Height 950 (1050) Estimated weight, kg 520

Transformer TC3-160 / 0.66-UHL3-380 / 400 is designed for use in alternating current circuits with a frequency of 50 or 60 Hz. SPECIFICATIONS Rated value of high voltage, V 400 Low voltage rated value, V 380 Rated power, kVA 160.0 Number of phases 3 Mains frequency, Hz 50 Connection diagram of HV windings Yн Connection diagram of the LV D windings Insulation temperature class F Temperature protection Termodat 11M3T1 BKT Cooling natural air Enclosure protection IP23 Coil material aluminum Overall dimensions, mm: Length 890 Depth 890 Height 1030 Estimated weight, kg 570

The TST-70 transformer is designed for use in alternating current circuits with a frequency of 50 or 60 Hz. And it serves to partially compensate for the voltage difference between the phases of the network caused by the uneven load of the phases. SPECIFICATIONS Rated load power, kVA 70 Rated line voltage, V 380 Limiting range of input line voltage, V 342-418 Number of phases 3 Mains frequency, Hz 50 ± 0.2 Insulation temperature class F Cooling natural air Enclosure protection IP23 Coil material aluminum Overall dimensions (LxDxH), mm: 645 × 470 × 670 Estimated weight, kg 145

The TSL-25-UHL3-10 / 0.4 transformer is intended for use in alternating current circuits with a frequency of 50 or 60 Hz. SPECIFICATIONS Rated value of high voltage, kV 10 Low voltage rated value, kV 0.4 Rated power, kVA 25.0 Number of phases 3 Mains frequency, Hz 50 HV D winding connection diagram Connection diagram of the LV windings Yн Insulation temperature class F Temperature protection no Cooling natural air Enclosure protection class IP00 Coil material aluminum Overall dimensions (LxDxH), mm: 720 × 380 × 640 Estimated weight, kg 250

PC "Aurora Electro" LLC has produced a transformer OS-125 / 0.66-UHL4-380 / 49, which is designed for use in alternating current circuits with a frequency of 50 or 60 Hz. SPECIFICATIONS Rated value of high voltage, V 380 Low voltage rated value, V 49 Rated power, kVA 125.0 Number of phases 1 Mains frequency, Hz 50 Scheme and group of connection of windings 1 / 1-0 Insulation temperature class F Temperature protection no Cooling natural air Enclosure protection class IP00 Coil material aluminum Overall dimensions (LxDxH), mm: 500 × 520 × 840 Estimated weight, kg 420

LLC Production Company "Aurora Electro" produces stationary isolation transformers with high voltage winding voltage up to 1500 V AC. Power: up to 630 kVA. Insulation separating the primary and secondary windings: double or reinforced. Enclosure up to IP Standard or individual according to your requirements, i.e. mains supply, load output supply, size restrictions. Installation of control devices such as "Termodat 11MZT1" with sensors in the windings, "Thermodat 11MZT1" with sensors in the magnetic core, Pt100 thermal resistance in the windings with a terminal to the block, MICROTHERM thermal relay in the windings with a terminal to the block, or your option.

PC "Aurora Electro" LLC develops and manufactures TST syimetizing transformers, which eliminate Phase imbalance and unbalance of phase voltages and currents at symmetrical line-to-line voltages; Imbalance (asymmetry) of line voltages and input currents; Imbalance (asymmetry) of phase and line voltages; Overheating of zero working conductors of cable lines; Breakage of the neutral wire (neutral); Imbalance (asymmetry) of the currents of diesel generator sets and (or) UPS; The problem of redistribution of currents in three phases. Using various schemes and those. solutions we can produce any type of balancing transformer: TST is a three-phase alternating voltage balancing transformer. ТСТР - three-phase balancing transformer - voltage normalizer. TST, which converts three-phase voltage to single-phase. Balancing transformer that converts three phases into one. Balancing transformer with reactive power compensation function. Power transformer with galvanic isolation.

PC "Aurora Electro" LLC develops and manufactures power transformers. Main characteristics: Rated power: up to 1000 kVA Voltage: up to 10 kV Connection of windings: D / Y, D / Yn, D / D, Y / Y, Y / Yn, Y / D Connection of windings in "Zigzag" D / Z, Y / Z, Z / Z Insulation heat resistance classes: B, F, H Coil material: copper, aluminum Magnetic core made of anisotropic steel with low specific losses Degree of protection provided by housing: up to IP66 Climatic version: U, UHL, TV Accommodation category: 1, 2, 3, 4, 5 Operating mode: continuous Service life: 30 years Warranty period: 3 years Possibility to install additional equipment: Additional equipment for the transformer is formed at the stage of drawing up a technical task or filling out a questionnaire. B lock temperature control. Temperature sensors. Voltage regulation device. Offsite from the network side. Installation of measuring devices. Current transformers. Additional cooling fans. Rollers for moving the transformer.

PC "Aurora Electro" LLC designs and manufactures three-phase and single-phase transformers for powering heaters of electric furnaces. We develop furnace transformers according to the customer's specifications in a wide range of powers and currents. We manufacture transformers with a large number of output voltage regulation steps. Technical characteristics of our furnace transformers: Power - up to 630 kVA Voltage - up to 1500 V Load current - up to 10,000 A Regulation - stepwise - insulation class B (default), F or H; - magnetic core material - anisotropic transformer steel 3409 and 3414; - degree of protection IP00, IP23, IP31 or IP54; nominal frequency 50Hz (default). Up to 200Hz; - cooling - natural (default) or forced; - temperature protection using the Termodat-11 controller with thermal resistances in the transformer windings (option); - auxiliary power supply for furnace control systems (option); - instrumentation (optional). Transformers are used in the following resistance furnaces: - Furnaces with silicon carbide (SiC) heaters - Furnaces with lanthanum chromite heaters (LaCr03) - High-temperature furnaces with molybdenum disilicide (MoSi2) heaters - Vacuum furnaces with molybdenum or tungsten heaters - High temperature retort vacuum furnaces with graphite heaters In these furnaces, the heaters are selected according to the parameter of the maximum permissible surface power and have a sufficiently low resistance, which does not allow them to be connected directly to the network. To power such furnaces, a low voltage is required - from 2 to 100 V at a current of up to 10,000 A. The use of stepwise regulation of the output voltage makes it possible to compensate for the change in resistance over time (aging) of silicon carbide heaters.

PC "Aurora Electro" LLC develops and manufactures power transformers. Main characteristics: Rated power: up to 1000 kVA Voltage: up to 10 kV Connection of windings: D / Y, D / Yn, D / D, Y / Y, Y / Yn, Y / D Connection of windings in "Zigzag" D / Z, Y / Z, Z / Z Insulation heat resistance classes: B, F, H Coil material: copper, aluminum Magnetic core made of anisotropic steel with low specific losses Degree of protection provided by housing: up to IP66 Climatic version: U, UHL, TV Accommodation category: 1, 2, 3, 4, 5 Operating mode: continuous Service life: 30 years Warranty period: 3 years The ability to install additional. equipment: Additional equipment for the transformer is formed at the stage of drawing up a technical task or filling out a questionnaire. Temperature control unit. Temperature sensors. Voltage regulation device. Offsite from the network side. Installation of measuring devices. Current transformers. Additional cooling fans. Rollers for moving the transformer.

PC "Aurora Electro" LLC produces electromagnetic chokes (reactors) for various purposes in the widest range of characteristics in accordance with the customer's specifications. We release Smoothing chokes. They are used in direct current circuits and are used to smooth out ripples that arise, including when using various single-phase and three-phase rectification circuits. Three-phase AC chokes (motor, mains, compensation) . Mains reduce the mutual influence of semiconductor converters in one network, reduce the rate of rise of inrush currents, compensate for capacitive currents of long cables. Motor reduce the heating of electric motor windings caused by high-frequency pulsations from frequency converters, limit the amplitude of short-circuit currents. Compensating ones are used to protect capacitors in reactive power compensation installations from high-frequency voltage components. Single-phase AC chokes. Chokes of the widest application according to your specification!

Concrete heating station SPB-125 "Aurora" based on dry power transformer. Mains supply: 380 V, 50 Hz, 3 phases. Rated power 125 kW. Four steps of output voltage 35, 45, 60, 80 V. Regulated by knife switches. Introductory machine. The maximum load current at any voltage level is 903 A. Load power 125 kW. Mains current at maximum load 190 A. Insulation class H. The winding material is aluminum. Natural air cooling. Continuous operation. Dimensions SPB-125 "Aurora" (LxWxH): 700 × 770 × 1110 mm Weight 460 kg Sold by the manufacturer himself.

Concrete heating station SPB-100 "Aurora" based on dry power transformer. Mains supply: 380 V, 50 Hz, 3 phases. Rated power 100kW. Four steps of output voltage 35, 45, 60, 80 V. Regulated by knife switches. Introductory machine. The maximum load current at any voltage step is 725A. Load power 100kW. Mains current at maximum load 158A Insulation class H. The winding material is aluminum. Natural air cooling. Continuous operation. Weight 400kg Dimensions SPB-100 "Aurora" (LxWxH): 700 × 770 × 1110mm Sold by the manufacturer himself.

Concrete heating station SPB-80 "Aurora" based on dry power transformer. Mains supply: 380 V, 50 Hz, 3 phases. Rated power 80kW. Four steps of output voltage 35, 45, 60, 80 V. Regulated by knife switches. Introductory machine. The maximum load current at any voltage step is 580A. Load power 80kW. Insulation class H. The winding material is aluminum. Mains current at maximum load 126A Natural air cooling. Continuous operation. Weight 370kg Dimensions SPB-80 "Aurora" (LxWxH): 700 × 770 × 1110mm   Sold by the manufacturer himself.

Concrete heating station SPB-63 "Aurora" based on dry power transformer. Mains supply: 380 V, 50 Hz, 3 phases. Rated power 63kW. Four steps of output voltage 35, 45, 60, 80 V. Regulated by knife switches. Introductory machine. The maximum load current at any voltage step is 455A. Load power 63kW. Insulation class H. The winding material is aluminum. Natural air cooling. Continuous operation. Weight: 316kg Dimensions SPB-63 "Aurora" (LxWxH): 700 × 720 × 1110mm   Prod by the manufacturer himself.

Concrete heating station SPB-40 "Aurora" based on dry power transformer. Mains supply: 380 V, 50 Hz, 3 phases. Rated power 40kW. Four levels of output voltage 35, 45, 60, 80 V. Regulated by knife switches. Introductory machine. The maximum load current at any voltage step is 290A. Load power 40kW. Insulation class of windings H. Material of windings - aluminum. Natural air cooling. Continuous operation. Weight: 295 kg Dimensions SPB-40 "Aurora" (LxWxH): 700 × 720 × 1110mm Sold by the manufacturer.

Brand new products Original 

Twist Locks as per ECC ADD AAC

Twin lobe rotor used for blowers as well as vehicles

Used in automobile 

Twin lobe rotor is a engine heart component of blowers  used at various applications it is a pair product

Hydraulic manifolds of critical accuracy upto 30 microns

We manufacture Hard Chrome plated shafts from 8mm diameter to 200 diameter with lenght up to 5 meters. We get our bearings contract manufactured under brand name HVD (Four point contact Sleeving Bearing, Deep groove ball bearing, Taper roller bearing, Spherical roller bearing) Sole distributor for Alwayse Engineering Ltd UK for their ball transfer units. (PAN INDIA AND MIDDLE EAST) Distributor for Colson Caster wheels. Distributor for Nippon Bearing Corporation Japan. Distributor for HIWIN

Designed for use Category I ** with a volume of 120 m3 or an area of up to 45 m2 Category II ** with a volume of 130 m3 or an area of up to 50 m2 III category ** with a volume of 150 m3 or an area of up to 55 m2 IV category ** with a volume of 170 m3 or an area of up to 60 m2 with a ceiling height of 2.7 m to prevent level rise microbial contamination of the air Capabilities: in continuous mode Power consumption, no more than 45 W UV curing power, 14.7 W Number of UV lamps, pcs. 3x15 W Overall dimensions, mm. 280x140x575 ± 5% Weight, net, kg 4 ± 0.3 Noise level, no more than 40 dBA Way of placement suspended / mobile Ozone-free UVC 30 W G 13 lamp , Lifetime: 10800 hours

Price : USD 648.00 Min Order : 1 Pcs Lead Time : 3 – 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Address : Jl.S.Parman No.21/272 City/Zip Code : Medan, 20151 Province : Sumatera Utara Country : INDONESIA   DHL/Fedex : 100% satisfied with the creativity of the box design Kualanamu International Airport

Pump membrane dosing units NDR-2M are designed for volumetric pressure head dosing of neutral and aggressive liquids, emulsions and suspensions. The area of ​​application of the membrane dosing unit is determined by the resistance of the materials of the flow path in the dosing medium and the design of the electrical equipment. Membrane pumping dosing unit NDR-2M can be used for dosing hazardous substances, flammable and combustible liquids, provided that safety rules are observed. To improve reliability, the diaphragm metering pump NDR-2M is equipped with a two-layer membrane made by & nbsp; from processed PTFE . 8 advantages of the NDR-2M membrane dosing pump: 1. Tightness. During operation of the NDR-2M pump, leakage of the pumped and working fluid is completely excluded. 2. Possibility of regulation without stopping the pump. & nbsp; The design of the NDR-2M pump provides pump running time. & nbsp; 3. Ease of operation and maintenance. & nbsp; In the pump NDR-2M & nbsp; no need to constantly monitor and maintain & nbsp; seal the plunger as it does with LP plunger pumps. & nbsp; 4. Wear-resistant valve. Diaphragm pump valves are specially designed for long-term operation in contact with aggressive media. Their service life is significantly longer than on conventional & nbsp; pumps ND. 5. The pump can operate at high pressures up to 100 MPa. Many diaphragm pump manufacturers cannot achieve this. 6. Membrane condition monitoring system. If the membrane is damaged, the control system will inform about it. Even in the event of a diaphragm rupture, the pump remains operational until the end of the process. Both a pressure gauge and electronic devices can serve as an alarm, which will report a problem to the control station. 7. Safety system In the event of blockage in the outlet piping due to faults or errors, a built-in valve will protect the pump from overload. & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp ; 8. Saving money Favorable price level achieved through our own production Technical characteristics of NDR-2M 400/63: & nbsp; Flow rate-400 l / h; Pressure at the pump outlet - 63 kgf / cm2; Engine-3 kW 1500 rpm; Order a diaphragm pump of European quality at a Ukrainian price!

Three-plunger crank pumps PT and T are intended for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Three-plunger pumps of the PT and T type are used in industries requiring high pressures, including explosion and fire hazardous ones. Areas of use: ·                  oil production: drilling and workover of wells, circumferential waterflooding, enhanced oil recovery, oil dewaxing and well equipment. ·                  chemical and petrochemical industry: production of ammonia, carbamide, melamine, acetic, nitric and other acids, supply of reagents under high pressure; ·                  mechanical engineering: hydraulic cutting, hydroforming, power equipment for hydraulic presses. ·                  power engineering: feed pumps for boiler installations of steam generators. ·                  food industry: reverse osmosis plants, homogenizers. ·                  utilities: repair and pressure testing of pipelines and hydraulic systems, flushing of the sewage system. On the basis of pumping units, UN, UPG units are manufactured, which are designed for hydrotreating sewage and other pipelines with a diameter of 80 mm to 600 mm, as well as external and internal surfaces of various technological equipment, mechanisms, buildings, structures and other objects. Specifications: feed - 6.3 m3 / hour; Pump outlet pressure - 6.3 MPa Version D1 A1 - V-belt transmission Order pumping equipment from the Manufacturer with a 1 year quality guarantee!

We sell High Qualtiy CNC LATHES & Vertical Turing Machinery.

Capping machine Zh7-UMT-6 is designed for vapor-vacuum sealing of cans and bottles with Twist-Off caps. It is used at enterprises of the canning industry of medium power. * Productivity, vessels / min 40 - 130 * Machine diagram linear * Closing method spec. belts The technical level of the machine meets the best foreign counterparts in Germany and Italy. The machine has a modern design, easy to operate, adjust, maintain and repair. The machines are in demand by canneries in Ukraine, Russia, Belarus, Kazakhstan and Moldova. The advantages of this closure method: * clogging with elastic deformation of the lid elements, which excludes the destruction of glass containers during clogging and opening; * there is no oxygen in the sealed container, which makes it possible to extend the shelf life of products; ease of use, since no special devices are needed to open the lid.

The OB-KET-C2 labeling machine is designed for sticking a side label on metal cylindrical cans filled with a product in accordance with GOST 5981-88. The labeling machine can be used in packaging lines for dairy, meat, vegetable canned food, as well as for packaging canned fish as part of lines installed on sea vessels. The machine can be used for autonomous work in food and other industries where similar cans are used. When the machine operates autonomously, its performance is not regulated. * Performance: - semi-automatic mode, not less than 6000-9000 pcs / h - automatic mode, not less than 9000-14000 pcs / h * Machine type linear, continuous * Installed power, no more than 1.55 kW * Electricity consumption, no more than 0.9 kW / h

The drum scaler is one of the most common designs of the scaler. A rotating drum with perforation is located inside the working chamber or hopper. The scales are removed by rubbing the fish against the drum walls. Scale drum works with various types of raw materials: fresh fish, chilled, thawed uncut fish of all sizes. Cleaning technology - group processing of non-oriented fish without prior sorting by length and thickness. The machine is used in the production of canned fish and preserves, semi-finished products and culinary products in technological lines in the canning (preserves) and culinary production of coastal fish processing enterprises.

The BESTEQ-FR-8 dispenser-dispenser is intended for filling canned containers with liquid products: melted fats, vegetable oil, marinades, tomato bays, water, brines, sauces. It can perform the function of adding a liquid component to a container with the main product. The machine is used in the production of canned fish and preserves, semi-finished products and culinary products in technological lines in the canning (preserves) and culinary production of coastal fish processing enterprises. * Productivity up to 100-120 pcs / min * The number of dosing heads is 8 pcs. * Diameter of vessels to be processed is from 40 to 105 mm * Height of vessels to be treated is from 25 to 150 mm

LLC "BESTEK-Engineering" manufactures and supplies conveyors: - The BESTEQ-TGC-600 cooling conveyor is designed for cooling pre-heat-treated raw materials. It is used in technological canning lines for the production of canned fish, canned vegetables supplied by our company. - Transporter for gutting fish BESTEQ-TMI-8000 designed for gutting fish, including removing caviar and entrails, inspection and additional washing of the carcass. It is used in lines for processing and preserving various fish (river or sea) with a capacity of 300 to 2000 kilograms per hour. - Swelling conveyor BESTEQ-TG-6000 Designed for moving and holding pre-breaded flour products (fish, raw meat, vegetables, etc.). - The BESTEQ-TBP-3000 packaging conveyor is designed to optimize the operation of packing metal cans with finished products into cardboard boxes by automating the supply of containers with products and disposal of filled boxes. - The BESTEQ-TP plate conveyor is designed to move containers or other goods between technological operations, thus linking individual machines into a single line. It is used in the line for the production of stewed meat, in the line for filling whole condensed milk with sugar. other.

Accumulative table BESTEQ-ART-1000 is designed to accumulate the necessary stock of containers before sending it to any technological operation. It can be used at the beginning of the line when manually laying containers on it with its subsequent issuance further into the line, as an intermediate link in the line with manual transfer of containers to the next operation, or as the final stage for the accumulation of finished products. It is used in technological canning lines for the production of canned meat (stew), canned fish, canned milk, canned vegetables, supplied by our company. * Table diameter, mm 1000 * Power of the electric drive, kW 0.18 * Overall dimensions (LxWxH) 1200x1200x1300 (± 50) Advantages of the BESTEQ-ART-1000 storage table * The reliability of the device, which is ensured by the use of only high-quality components and materials in the production, as well as the high professionalism of the specialists involved in the development and assembly of equipment. * Easy to start and operate. The design and equipment of the device are intuitive and accessible to personnel without special technical skills. * Versatility. The area of application of the device can be changed by changing the direction of rotation of the table (for receiving or consuming containers) and the speed of its rotation.

BESTEQ-IRHM-4200 metal container heating machine is designed to remove moisture by heating from metal cans in production lines where condensation in the can is unacceptable. It is used in the line for filling whole condensed milk with sugar. * Productivity: 50 - 120 cans per minute (depends on the container size) * Overall dimensions, mm: 4250x875x1360 (± 50) The warranty period is 12 months (it is possible to extend the warranty up to 24 months). Read more on the website

The BESTEQ-UVDM-1500 ultraviolet disinfection machine is designed for disinfection (with ultraviolet rays) of empty cans before filling in condensed milk filling lines. * Productivity, vessels / h: 7200 (depends on the size of the container). The warranty period is 12 months (it is possible to extend the warranty up to 24 months). Advantages of BESTEQ-UVDM-1500 Ultraviolet Disinfection Machine * Reliability is ensured by the use of only high-quality materials and components of European production, which is confirmed by many years of experience with our customers. * The versatility is due to the use of a frequency converter in the drive system of the machine, thereby providing stepless speed control. * High-quality processing of containers is ensured by the use of a high-quality ultraviolet lamp, the use of which guarantees complete disinfection of containers by regulating the speed of the conveyor belt. * The durability of the machine is ensured by the use of only stainless steel Aisi 304 and Aisi 316, as well as high-quality drive mechanisms, components and electronics from the best European manufacturers. * Safety is achieved by using low-voltage equipment in the control circuit. * Ergonomics is achieved through continuous improvement of the machine design with the aim of ease of use based on practical experience. The warranty period is 12 months (it is possible to extend the warranty up to 24 months). Read more on the website

Labeling machine BESTEQ-LMW-1 is designed for applying self-adhesive labels to cylindrical bottles and cans. * Maximum productivity, vessels per hour no more than 7,000 * Maximum speed of the conveyor, m / min 20 * Maximum label height with liner, mm 110 * Maximum label length, mm 520 The warranty period is 12 months (it is possible to extend the warranty up to 24 months). Read more on the website