Claire Wang

Specification: 1. Exhaust System: Front 2. Suction Power:85-90kg 3. Slide Hammer Weight:3.5lb 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:240L/min 7. Net Weight:2750g 8. Tool Length:1120mm 9. Packing:4pcs/14kg/16kg/1.32'   Application: It supplies a new way that save a lot of time to fix steel plate. Let the obsession with dent throw out. It's the best way to solve. As easy as pie to use. When pressure valve is bon after a few minute, however is a dent of car, an oil box of motorcycle or a steel plate of air plane, all of trouble will be solved.

Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill.   Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:540L/min 5. Net Weight:895g 6. Tool Length:240mm 7. Collet Size: 6mm (1/4") 8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T) 9. Packing:10pcs/10kg/11kg/0.53'

Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed.   Specification: 1. Free Speed:17000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:650L/min 5. Net Weight:1300g 6. Tool Length:1900mm 7. Exhaust System: Rear 8. Packing:10pcs/15kg/16kg/2.3'

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair   Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System: Front 8. Packing:10pcs/21kg/22kg/1.38'

Description: There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries   Specification: 1. Strokes Per Minute:3400 spm 2. File Shake Dia:5mm 3. Stroke Length:5mm 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:150L/min 7. Net Weight:580g 8. Tool Length:700mm 9. Packing:10pcs/8kg/9kg/1.2'

Description: Flux Chipper it's powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside.   Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:1800g 6. Tool Length:230mm 7. Packing:5pcs/11kg/11.5kg/0.4'

Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside.   Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:2590g 6. Tool Length:385mm 7. Needle:19 pcs 8. Packing:5pcs/14kg/14.5kg/0.4'

Description: The 3” PAD supply various of sponge and wool-wheel for partial. Small volume, light weight, low noise. It’s suitable for the small area to smooth. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:2500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:790g 6. Tool Length:160mm 7. Packing:20pcs/20kg/21kg/1.2'

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. Free Speed:13000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:815g 6. Tool Length:180mm 7. Packing:20pcs/21kg/22kg/1.2' 8. SM01N:Orbital Diameter:3mm 9. SM01NA:Orbital Diameter:1.5mm 10. SM01NB:Orbital Diameter:0.75mm