Electronics 4 u LTD

Milwaukee M18 18V Lithium-Ion Cordless Combo Kit 10-Tool, 2 Batteries, Charger.   * Brand new in a sealed box.   Get the job done with this Milwaukee M18 18V Lithium-Ion Cordless Combo Tool Kit. Great for DIYers and pros, it features a Milwaukee 4-pole frameless motor for lasting use. Redlink Plus intelligence prevents it from overloading, overheating and over discharging. Milwaukee 4-pole frameless motor: features a robust design for longer life, more power and more run time than any brushed competitor All-metal gear case and chuck: provide maximum impact and shock durability Redlink intelligence: advanced overload protects the tool against abusive situations and provides maximum life 175 plus trade focused solutions powered by the M18 battery platform M18 cordless drill/driver with Milwaukee 4-pole frameless motor delivers 525 in. lbs. of peak torque, 0-550/0-1,700 RPM and 29,000 BPM M18 1/4 in. hex impact with the Milwaukee 4-pole frameless motor delivers 1400 in. lbs. of torque M18 Hackzall provides superior 1-handed control and versatility over a standard reciprocating saw M18 work light provides a fold-away hook for hands free use and a 135 degree rotating head to direct light at the work area M18 6 in. circular saw delivers 3,500 RPM with magnesium upper and lower guards for maximum durability M18 compact blower delivers the fastest jobsite cleanup   M18 1/2 in. high torque impact wrench with friction ring delivers 450 ft.-lbs. of torque Milwaukee M18 cordless multi-tool cuts up to 50% faster and delivers up to 2x more cuts per charge than the competitors Includes: (1) 2606-20 M18 brushed drill/driver; (1) 2656-20 M18 1/4 in. impact driver; (1) 2625-20 M18 Hackzall; (1) M18 circular saw; (1) M18 4-1/2 in. cut-off/grinder; (1) 2615-20 M18 RAD; (1) 2626-20 M18 multi-tool; (1) 2663-20 1/2 in. square drive impact wrench; (1) 2735-30 M18 LED work light; (1) 0884-20 M18 compact blower; (1) 48-11-1828 M18 XC Redlithium battery pack; (1) 48-11-1815 M18 compact Redlithium battery pack; (1) 48-59-1812 M12-M18 multi-voltage charger Accessories included: (1) general purpose 6-1/2 in. circular saw blade; (1) general purpose Sawzall blade; (2) contractor bags

2ch all-in-one DJ system equipped with a 10.1-inch touch displayThe XDJ-RX3 inherits various functions from the Pioneer DJ flagship models CDJ-3000 and DJM-900NXS2, and adds new functions for intuitive browsing and accurate mixing. In addition, the 10.1-inch touch display has a higher resolution than the existing model, making browsing songs and operating effects more comfortable and smoother.10.1-inch touch display for quick browsing and precise mixingEquipped with a 10.1-inch touch display, the largest in our all-in-one DJ system. The improved resolution makes it possible to check music information such as waveforms more clearly. Compared to the 7-inch touch display equipped with "XDJ-RX2", the number of songs that can be displayed has been increased from 8 to 12, and category icons have been added for faster browsing and accurate mixing.●RELEASE FX, which adds dynamic accents to music with a single pad operationA new effect, RELEASE FX, has been added to PERFORMANCE PADS, a popular all-in-one DJ system. By simply tapping the pad, you can add 8 types of effects assigned to the pad. For example, effects such as ECHO OUT and BACK SPIN can be used to boldly switch and mix songs.●COLOR ON JOG DISPLAY for faster and more accurate performanceBy installing a high-definition color liquid crystal display in the center of the jog, you can grasp the necessary song information at hand, and you can mix more quickly and accurately. In addition, it is possible to display the artwork of the songs on the full screen, allowing intuitive recognition of the songs loaded on the deck. In addition, the jog FEELING ADJUST function allows you to set the optimum load for scratch performance according to your preference.●BEAT FX and SOUND COLOR FX for richer musical expressionSix new types have been added to the BEAT FX on the XDJ-RX2 for a total of 14 types, and two new SOUND COLOR FX types have also been added. A total of 16 types of various effects are the same specifications as the DJM-900NXS2, allowing you to enjoy richer musical expression.●Other features◎USB Hardware UnlockThis unit is a target device for rekordbox Hardware Unlock. All the functions included in the Core/Professional plan can be used simply by connecting to a PC/Mac with a USB cable.◎Serato DJ ProSupports control of Serato DJ Pro. You can access and select songs from Serato DJ Pro playlists and streaming services on the XDJ-RX3 screen.◎High-quality sound that is faithful to the original soundWith a base structure that suppresses sound quality deterioration and noise and high-precision sound quality tuning, the low range is punchy, the midrange is contoured, and the high range is highly expressive. Reproduce quality sound.◎Equipped with two microphone inputsEquipped with two microphone inputs designed to maintain high sound quality even when the input level is high.◎4 x AUX terminals and 2 x LINE/PHONO input terminalsIt has a dedicated stereo mini-jack input so you can stream music from your smartphone or other device. You can also connect a CDJ or turntable from the LINE/PHONO input terminal.◎3 x USB portEquipped with 3 USB ports, smooth DJ changes and B2B are possible.◎rekordbox Link ExportBy connecting this unit and a PC/Mac with a USB cable or LAN cable, you can play back tracks in the rekordbox™ library. XDJ-XZ supports LINK EXPORT by connecting two PCs/Macs.◎GATE CUEUsing the GATE CUE function, which plays the sound from the CUE point only while the pad is pressed, expands the possibilities of pad play.■Specifications●Main functions・Playable music file formats・MP3/AAC/WAV/AIFF/FLAC・Compatible file system　FAT16/FAT32/HFS+</fontsize="+0"> Shippin

  Features 18-Volt 1/2-Inch Hammer Driver/Drill - XPH10Z Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque Variable 2-speed design (0-600 and 0-1,900 RPM) covers a wide range of drilling, driving and hammer applications Compact and ergonomic design at only 7-3/4" long Weighs only 3.4 lbs. with battery (battery not included) for reduced operator fatigue Rubberized soft grip provides increased comfort on the job Dual L.E.D. lights with afterglow illuminate the work area All metal gears for increased durability 18-Volt 1/4-Inch Impact Driver - XDT11Z Variable speed (0-2,900 RPM and 0-3,500 IPM) and 1,460 in.lbs. of torque for a wide range of fastening applications 4-pole motor with innovative 4-brush design delivers increased RPM without decreasing torque All metal gear housing for increased job site durability Compact and ergonomic design at only 5-3/8" long Weighs only 2.8 lbs. with battery (battery not included) for reduced operator fatigue Convenient one-touch 1/4" hex chuck for quick bit changes Rubberized soft grip provides increased comfort on the job 18-Volt 1-1/4-Inch Reciprocating Saw - XRJ04Z Makita-built variable speed motor delivers 0-2,800 strokes per minute and a 1-1/4" stroke length for faster cutting "Tool-less" blade change system allows for faster blade installation and removal for increased productivity Variable speed trigger for added convenience Compact and ergonomic design at only 19-1/8" long Weighs only 8.3 lbs. with battery (battery not included) for reduced operator fatigue Rubberized soft grip handle provides increased comfort on the job Large two-finger trigger for operator convenience Electric brake for maximum productivity Refined crank mechanism design minimizes blade deflection and reduces vibration 18-Volt 6-1/2-Inch Circular Saw - XSS02Z Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood Heavy gauge, precision machined base for smooth, accurate cutting and added durability 50-Degrees maximum bevel cutting capacity Weighs only 7.3 lbs. with battery (battery not included) for reduced operator fatigue 6-1/2" blade delivers a 2-1/4" cutting capacity for a wide range of cutting applications Rubberized soft grip handle provides increased comfort on the job 18-Volt 4-1/2-Inch Cut-Off/Angle Grinder - XAG03Z Automatic Speed Change technology adjusts speed and torque during operation for optimum performance The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application Compact and ergonomic design at only 14-1/4" long Weighs only 5.5 lbs. with battery (battery not included) for reduced operator fatigue Rubberized soft grip provides increased comfort on the job Slide switch with lock-on for operator convenience 3-stage L.E.D. gauge indicates battery charge level Soft start suppresses start-up reaction for smooth start-ups and longer gear life Spiral bevel gears for smoother rotations and a more efficient transfer of energy Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on Efficient internal cooling is engineered for optimum performance Wire mesh intake covers are engineered to prevent debris from entering motor 18-Volt 1/2-Inch Impact Wrench - XWT04Z Makita-built motor delivers 325 ft.lbs. of Max Torque, with 1,600 RPM and 2,200 IPM for superior fastening power Shock absorbent handle protects battery housing for extra durability Rocker switch for forward/reverse operation Rubberized soft grip handle provides increased comfort on the job Compact and ergonomic design at only 10-1/2" long Weighs only 7.5 lbs. with battery (battery not included) for reduced operator fatigue Built-in L.E.D. light illuminates the work area 18-Volt 1/2-Inch Impact Wrench - XWT05Z Makita-built 4-pole motor delivers 170 ft.lbs. of Max Torque 0-2,100 RPM and 0-3,200 IPM for a wide range of fastening applications Compact and ergonomic design at only 6-1/2" long Weighs only 3.8 lbs. with battery (battery not included) for reduced operator fatigue Built-in L.E.D. light with afterglow illuminates the work area Ergonomic shape fits like a glove with even pressure and easy control Rubberized soft grip handle provides increased comfort on the job 18-Volt 7/8-Inch Rotary Hammer - XRH04Z Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications Built-in clutch reduces gear damage by automatically disengaging gears if bit binds Faster drilling with synchronized RPM and BPM Job site tested shock absorbent handle protects the battery housing for extra durability One-touch sliding chuck for quick bit changes Chisel rotates 360-Degrees with 40 different positions Compact and ergonomic design at only 16-3/8" long 18-Volt 1/4-Inch Hex Drywall Screwdriver - XSF03Z BL Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications Push Drive Technology ? in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application Ergonomically designed rubberized pistol grip with large 2-finger trigger for increased comfort Adjustable nose piece delivers consistent screw depth Lock-on button for continuous use Compact and ergonomic design at only 9-7/8" long 3-stage L.E.D. gauge indicates battery charge level 18-Volt 3/8-Inch Angle Drill - XAD01Z Makita-built 4-pole motor delivers 121 in.lbs. of Max Torque Variable speed (0-1,800 RPM) for a wide range of drilling and driving applications 3/8" keyed metal chuck for improved bit gripping power Compact 2-5/8" angle head height for use in close quarters Compact design at only 12-3/8" long Weighs only 4.0 lbs. with battery (battery not included) for reduced operator fatigue Built-in L.E.D. light with afterglow illuminates the work area Large paddle switch and soft grip provide increased comfort on the job 18-Volt L.E.D Lantern/Flashlight - DML185 Three L.E.D. lighting modes: 360-Degrees lantern, 180-Degrees lantern or flashlight 360-Degrees lantern mode provides 620 lumens; 180-Degrees lantern mode provides 310 lumens; flashlight mode provides 90 lumens 180-Degrees-360-Degrees lantern lighting allows the user to select between entire work area or specific task illumination Up to 11 hours of continuous illumination in 360-Degrees lantern mode with a 5.0Ah LXT? battery (battery sold separately) Up to 21 hours of continuous illumination in 180-Degrees lantern mode with a 5.0Ah LXT? battery (battery sold separately) Up to 59 hours of continuous illumination in flashlight mode with a 5.0Ah LXT? battery (battery sold separately) Compact and ergonomic design at only 14-3/8" tall Metal hang hook swivels 360-Degrees and folds away for added convenience Weighs only 2.1 lbs. with battery (battery not included) for reduced operator fatigue Rubberized soft grip provides increased comfort on the job 18-Volt Xenon Flashlight - DML185 Xenon bulb for 4,500-lux brightness 4-position head pivots for versatility Compact and ergonomic design at only 11-1/8" long Includes shoulder strap and 2 bulbs Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger (battery and charger sold separately) Rubberized soft grip provides increased comfort on the job An ideal addition to any toolbox or workshop 18-Volt 179-Mph Cordless Blower - DUB182Z Variable speed (0-18,000 RPM) for optimum speed control Up to 12 minutes of continuous operation from a single charge at high speed Compact and ergonomic design at only 20-3/4" long Weighs only 3.9 lbs. with battery (battery not included) for reduced operator fatigue Rubberized soft grip handle for increased operator comfort Makita-built variable 3-speed motor produces a maximum air velocity of 179 MPH A perfect addition to any gangbox or tool box 18-Volt Job Site Radio - XRM05 Delivers rich stereo sound from 2 powerful 3.5 in. side-firing speakers 1 auxiliary port for MP3 compatibility and 1 USB port for charging a mobile device Protective bumpers are engineered for increased durability Weighs only 10.4 lbs. with battery (battery not included) for easy portability Menu controls to set FM mono/stereo, clock settings, volume and snooze Water and dust resistant construction is engineered for improved operation in harsh job site conditions Illuminated control buttons and dial for superb visibility 18-Volt 5-3/8-Inch Metal Cutting Saw - XSC01Z Makita-built motor delivers 3,600 RPM for faster cutting Cuts a wide range of metals including Unistrut?, all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more Compact, ergonomic design at 13-3/4" long Weighs only 5.7 lbs. with battery (battery not included) for reduced operator fatigue Soft grip handle provides increased comfort on the job Built-in L.E.D. light illuminates the work area Heavy gauge, precision machined base for smooth, accurate cutting and added durability What's in The Box 18-Volt 1/2-Inch Hammer Driver/Drill - XPH10Z 18-Volt 1/4-Inch Impact Driver - XDT11Z 18-Volt 1-1/4-Inch Reciprocating Saw - XRJ04Z 18-Volt 6-1/2-Inch Circular Saw - XSS02Z 18-Volt 4-1/2-Inch Cut-Off/Angle Grinder - XAG03Z 18-Volt 1/2-Inch Impact Wrench - XWT04Z 18-Volt 1/2-Inch Impact Wrench - XWT05Z 18-Volt 7/8-Inch Rotary Hammer - XRH04Z 18-Volt 1/4-Inch Hex Drywall Screwdriver - XSF03Z 18-Volt 3/8-Inch Angle Drill - XAD01Z 18-Volt L.E.D Lantern/Flashlight - DML185 18-Volt Xenon Flashlight - DML806 18-Volt 179-Mph Cordless Blower - DUB182Z 18-Volt Job Site Radio - XRM05 18-Volt 5-3/8-Inch Metal Cutting Saw - XSC01Z (4) 18-Volt 3.0Ah Lithium-Ion Battery (2) 18-Volt Lithium-Ion Rapid Optimum charger Tool Bag w/ Wheels - 831269-3 Tool Bag - 831284-7 Owner's Manual Warranty 3-Year Limited Factory Warranty 30 Day Satisfaction Guaranteed WHY BUY FROM US? SECURE & HASSLE-FREE SHOPPING All items are covered by manufacturer warranty. FAST SHIPPING Most orders delivered in 1-3 business days. CUSTOMER SERVICE Call us toll free: 1-800-629-3325 SATISFACTION GUARANTEED All our sales are backed by a 30-day satisfaction guarantee.   SPECIFICATIONS Sku XT1501 Brand Makita Voltage 18v Amp Hour 3.0Ah Tool Count 15 Shipping Weight 95 lbs. 18-VOLT 1/2-INCH HAMMER DRIVER/DRILL - XPH10Z Drive Size 1/2 in. Drive Type Keyless Capacity (Steel) 1/2 in Capacity (Wood) 1-1/2 in. Capacity (Masonry) 1/2 in. No Load Speed 0 - 600 / 0 - 1,900 Rpm Blows Per Minute 0 - 9,000 / 0 - 28,500 Bpm Max. Torque 380 in-lbs. Length 7-3/4 in. Product Weight 3.4 lbs. 18-VOLT 1/4-INCH IMPACT DRIVER - XDT11Z Drive Size 1/4 in. Drive Type Hex No Load Speed 0 - 2,900 Rpm Impacts Per Minute 0 - 3,500 Ipm Max. Torque 1,460 in-lbs. Length 5-3/8 in. Product Weight 2.8 lbs. 18-VOLT 1-1/4-INCH RECIPROCATING SAW - XRJ04Z Length of Stroke 1-1/4 in. Max. Cutting Capacity(Wood w/ 12 in. Blade) 10 in. Max. Cutting Capacity (Pipe) 5-1/8 in. Strokes Per Minute 0 - 2,800 Spm Length 19-1/8 in. Product Weight 8.3 lbs. 18-VOLT 6-1/2-INCH CIRCULAR SAW - XSS02Z Blade Diameter 6-1/2 in. Arbor 5/8 in. Max. Cutting Capacity at 90-Degrees 2-1/4 in. Max. Cutting Capacity at 45-Degrees 1-9/16 in. No Load Speed 3,700 Rpm Length 13-5/8 in. Product Weight 7.5 lbs. 18-VOLT 4-1/2-INCH CUT-OFF/ANGLE GRINDER - XAG03Z Grinding Wheel 4-1/2 in. No Load Speed 8,500 Rpm Spindle Thread 5/8 in. - 11 UNC Lock On Switch Yes Lock Off Switch No Grinder Switch Type Body Grip/Slide Length 14-1/4 in. Product Weight 5.5 lbs. 18-VOLT 1/2-INCH IMPACT WRENCH - XWT04Z Drive Size 1/2 in. Drive Type Square No Load Speed 1,600 Rpm Impacts Per Minute 2,200 Ipm Max. Torque 325 ft-lbs. Speed Power Selection 1 Length 10-1/2 in. Product Weight 7.5 lbs. 18-VOLT 1/2-INCH IMPACT WRENCH - XWT05Z Drive Size 1/2 in. Drive Type Square No Load Speed 0 - 2,100 Rpm Impacts Per Minute 0 - 3,200 Ipm Max. Torque 170 ft-lbs. Length 6-1/2 in. Product Weight 3.8 lbs. 18-VOLT 7/8-INCH ROTARY HAMMER - XRH04Z Chuck Type SDS-Plus Max. Capacity (Concrete Drilling) 7/8 in. Optimum Range (Concrete Drilling) 5/32 in. - 1/2 in. Impact Energy 1.4 ft-lbs. No Load Speed 0 - 1,200 Rpm Blows Per Minute 0 - 4,00 Bpm Length 16-3/8 in. Product Weight 7 lbs. 18-VOLT 1/4-INCH HEX DRYWALL SCREWDRIVER - XSF03Z Drive Size 1/4 in. Drive Type Hex No Load Speed 0 - 4,000 Rpm Length 9-7/8 in. Product Weight 3.8 lbs. 18-VOLT 3/8-INCH ANGLE DRILL - XAD01Z Chuck Type 3/8 in. Chuck Size Keyed Capacity (Steel) 3/8 in. Capacity (Wood) 1 in. No Load speed 0 - 1,800 Rpm Max. Torque 121 in-lbs. Handle Angle Length 12-3/8 in. Product Weight 4 lbs. 18-VOLT L.E.D LANTERN/FLASHLIGHT - DML185 Brightness 180 Lumens Run Time Up to 7.5 Hours Bulb Type Xenon Length 11-1/8 in. Product Weight 2.1 lbs. 18-VOLT XENON FLASHLIGHT - DML806 Brightness 240 Lumens Run Time Up to 59 hours Bulb Type 12 LED Length 14-3/8 in Product Weight 2.1 lbs. 18-VOLT 179-MPH CORDLESS BLOWER - DUB182Z Max. Air Volume 91 Cfm Max. Air Velocity 179 Mph No Load Speed 0 - 18,000 Rpm Length 20-3/4 in. Product Weight 3.9 lbs. 18-VOLT JOB SITE RADIO - XRM05 Bluetooth Compatibility Yes Mp3 Compatibility Yes Run Time Up to 20 hours Length 13 in. Width 8.8 in. Height 15 in. 18-VOLT 5-3/8-INCH METAL CUTTING SAW - XSC01Z Blade Diameter 5-3/8 in. Arbor 5/8 in. Max. Cutting Depth 2 in. No Load Speed 3,600 Rpm Length

Technical Specification: Scanning resolution 0.2mm~3mm Supports 4 scanning modes with various optional accessories Single shot scan accuracy ranges from 0.04mm to 0.1mm depending on scanning mode Scan Speed: 10 frames/s, 3,000,000 points/s in Handheld HD Scan | 30 frames/s, 1,500,000 points/s in Handheld Rapid Scan Single scan range is 209*160mm-310*240mm Working Distance 510 mm Mesh editing features such as hole filling, smoothing, sharpening added Export file format: OBJ, STL, ASC, PLY, P3, 3MF Requires Color Pack Add-on Module to capture texture Light source: LED   Solid Edge SHINING 3D Edition: Design Tool From SIEMENS PLM Software Convergent Modeling Synchronous Modeling Reverse Engineering Generative Design Simulation Additive Manufacturing    Recommended Configuration: Windows 7 (64bit) or Windows 8 (64bit) or Windows 10 (64bit) Processor: I7-8700 or higher Memory: 32GB or higher Graphics card: NVIDIA GTX1080 or higher; Interface: high-speed USB 3.0   Package Included:  EinScan Pro HD handheld 3D Scanner  Industrial Pack (Tripod & Turntable) - Gets higher accuracy up to 0.04mm and better details Color camera pack - for scanning texture color  Solid Edge Shining 3D Edition CAD software license card

Product description Uniz Slash Plus 300 3D Printer Start your 3D printing with SLASH PLUS, a full-featured desktop 3D printing solution with world lead SLA-LCD technology. SLASH PLUS is perfect for a wide variety of applications including high quality dentistry, arts, crafts and education. Patented duo liquid cooling system will guide you to a new level of printing speed

ToyBox 3D Printer For Kids Starter Bundle Item Specifics: Color: White Condition: Open Box-- New and unused; opened; inner contents undisturbed; protective foam around printer; all included items are shown in photos; distressed packaging Features: Includes 1/2 lb PLA Coconut printing material Supports iOS, Android or any web browser Print volume: 7 x 8 x 9 cm Printing speed of 60 mm/s LCD touchscreen 100V-240V voltage

BenQ GS2 Wireless Mini Portable Projector for Outdoor Use | IPX2 Splash & Drop Resistant | Google Cast & AirPlay | Bluetooth Speaker | WiFi | Smart TV App | HDMI | USB-C OUTDOOR-FRIENDLY: IPX2 splash and drop resistant with adjustable tilt hinge, autofocus, and keystone correction CABLE FREE: GS2 is compatible with Google Cast (Android) and AirPlay (iOS). BLUETOOTH SPEAKER: Robust 4-watt chambered audio so GS2 doubles as a portable Bluetooth speaker VERSATILE-CONNECTIVITY: HDMI, USB-C, and USB connectivity INSTANT ENTERTAINMENT: GS2 supports content up to 1080p for HD images and has instant on/off

GIGABYTE Z690 AORUS PRO (LGA 1700/ Intel Z690/ ATX/ DDR5/ Quad M.2/ PCIe 5.0/ USB 3.2 Gen2X2 Type-C/ WiFi 6/ 2.5GbE LAN/ Gaming Motherboard)

SenseCAP M1 HNT Helium Indoor Crypto Miner EU868 (BRAND NEW) These are brand new sealed, straight from Manufacturer. This is not a preorder item, we have the item in stock. SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with the Helium LongFi Network. SenseCAP M1 can connect to The People's Network with a few simple steps and within minutes, and helps you build LoRa applications with low costs. SenseCAP M1 provides miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It helps you join and contribute to the infrastructure of The People's Network while enjoying the benefits from the Helium community.

Allen & Heath SQ-7 48-Channel 36-Bus Digital Mixer Board 32+1 Motorized Faders 48 channel / 36 bus digital mixer SQ-7 is the 33-fader flagship console in the SQ series, powered by Allen & Heath?s revolutionary 96kHz XCVI FPGA engine. Created to excel in demanding scenarios such as AV, corporate events, live productions and houses of worship, SQ-7 offers pristine high-resolution audio quality and an ultra-low latency of <0.7ms. The console features 32 exceptional onboard mic preamps, plus 8 stereo FX engines with dedicated stereo return channels and access to the renowned RackExtra FX library. SQ is a natural choice for in-ear monitor setups, providing 12 stereo mixes (configurable as groups or auxes), whilst Automatic Mic Mixing makes it an excellent choice for conferences, panel talks and more.  

Brother Embroidery Machine PR1055X 10 Needle Home Embroidery Machine BRAND NEW.   10-Needle 14” x 8” Maximum embroidery area 1000spm maximum embroidery speed   0 stitch counts. (see photos)   Included EMBROIDERY HOOPS - 1.5” x 2” , 8” x 14” , 5” x 7” , 4” x 4”   All accessories included, and the table as well.

Leica FlexLine TS07 is a manual total station, enabling you to carry out mid- to high-accuracy survey and stakeout tasks easily and efficiently. Building construction, civil engineering, or surveying and mapping professionals benefit from the TS07 helping them solve their daily professional challenges and tasks: