Check availability
104.97
USD/pcs
104.97
USD
Minimum order: 1 pcs
Supply ability: 1 pcs/per day
ITMIR.KZ
Not verified supplier
Kazakhstan
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
RONIXTOOLS
Germany
Specify the price
USD
0
0
Experience the unmatched quality of the Ronix 8905K cordless hammer drill kit. The high-efficiency brushless 20V motor has enabled this tool to take care of a wide range of applications with three main functions: drilling, Screwing, and hammer drilling. A brushless motor has a 50% longer lifetime and 25% more speed. A drill with a brushless motor is lighter in weight, makes less noise, and might run longer than the same cordless drill fitted with a brushed motor. The Ronix 8905K has a compact, ergonomic design built with the latest technology
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill.
Specification:
1. Free Speed:3000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:540L/min
5. Net Weight:895g
6. Tool Length:240mm
7. Collet Size: 6mm (1/4")
8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T)
9. Packing:10pcs/10kg/11kg/0.53'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
60mmx260mm
Miniaturized, lightweight and 1.3 kgs only.
Handle angle can adjusting range reach 180.
Adjustable guide shaft.
Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution.
Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc.
From grind to the surface polishing all can application.
Rid of surface scar and deckle edge.
Stainless steel surface tiny mark processed.
Specification:
1. Free Speed:17000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:650L/min
5. Net Weight:1300g
6. Tool Length:1900mm
7. Exhaust System: Rear
8. Packing:10pcs/15kg/16kg/2.3'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Rubber sleeve keeps hands from getting cold or slip
Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to
the tool.
Front thumb-adjustable water knob enhances the tool control.
No visible water tube and screw make a seamless smooth touch and no more break risk when dropping.
Cast from aircraft aluminum.
The watertight sealed bearings provide long life and smooth rotational speeds.
The water and air controls are simple to use and conveniently located.
Rear air vent removes exhaust through a hose protector, away from operator's hands.
The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet!
Detachable rotor and gear design brings you an economical repair
Specification:
1. Free Speed:4500 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:660L/min
5. Net Weight:1220g
6. Tool Length:235mm
7. Exhaust System: Front
8. Packing:10pcs/21kg/22kg/1.38'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface.
It can purge hardened surface of metal that made from discharge electricity quickly.
Long life, high speed, light weight and trouble free.
to the processing of footwear, mold and woodworking industries
Specification:
1. Strokes Per Minute:3400 spm
2. File Shake Dia:5mm
3. Stroke Length:5mm
4. Air Inlet:1/4"
5. Air Pressure:6kg/cm2
6. Air Consumption:150L/min
7. Net Weight:580g
8. Tool Length:700mm
9. Packing:10pcs/8kg/9kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
Flux Chipper it's powerful for exerting and chisel is suitable to dismantle.
It's was designed specially to use for a long time. And suitable for boat, machine and
large instrument to clear off the rust and adhesion underside.
Specification:
1. Blow Per Minute:3000 b/min
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:200L/min
5. Net Weight:1800g
6. Tool Length:230mm
7. Packing:5pcs/11kg/11.5kg/0.4'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
Needle Scaler powerful for exerting and chisel is suitable to dismantle.
It's was designed specially to use for a long time. And suitable for boat, machine and
large instrument to clear off the rust and adhesion underside.
Specification:
1. Blow Per Minute:3000 b/min
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:200L/min
5. Net Weight:2590g
6. Tool Length:385mm
7. Needle:19 pcs
8. Packing:5pcs/14kg/14.5kg/0.4'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
The 3” PAD supply various of sponge and wool-wheel for partial.
Small volume, light weight, low noise. It’s suitable for the small area to smooth.
A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.
Specification:
1. Free Speed:2500 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:790g
6. Tool Length:160mm
7. Packing:20pcs/20kg/21kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind.
Long life, high speed. Light weight and trouble free.
A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.
Specification:
1. Free Speed:15000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:650g
6. Tool Length:160mm
7. Packing:20pcs/18kg/19kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
A lot of appurtenances to supply the various of sandpaper and burnishes for process.
It was designed specially to use for a long time.
Volume is small, the weight is light and the rotational speed is fast.
There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm)
It’s suitable for burnishes that cannot grind the detailed polish and useful for process
in difficult reach area, mold and woodworking.
Specification:
1. Free Speed:13000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:815g
6. Tool Length:180mm
7. Packing:20pcs/21kg/22kg/1.2'
8. SM01N:Orbital Diameter:3mm
9. SM01NA:Orbital Diameter:1.5mm
10. SM01NB:Orbital Diameter:0.75mm
USD
182.0/pcs
182.0
Product Features: Blade with spring installed to prevent locking or power cut problems. Power Regular position with 3 forward and 3 reverse positions. *Product Specifications - Model: WS-2066. Mechanism: Twin Hammer. Standard. Bolt diameter: 30 (mm). Square drive: 3/4 (inch). Max. Torque 5s: 2000 (ft-lb). Exhaust system: Handle. Regulator: 6 - position. Freewheel speed: 7500 rpm. Price: $182.00 with minimum order: 50 pieces.
We prefer that you directly reach me by Google with keywords: (soartec.mybranchbob) PLS MUST leave your company contact details in your inquirires, otherwise we will consider yours scams. Thanks for understanding.
USD
310.0/pcs
310.0
*Product Name: Air-cut Pistol Screwdriver.*Model: WX-3R35PBP.*Free Speed: 2200(RPM) *Torque Range: 3~20(kgf-cm) *Screw Diameter: M2.4~M4, 5 . *Self-tapping screw diameter: M2.0 ~ M3.5. *Handle Diameter: 31mm.*Air Hose Size: 6.35 (mm)**Price: $310.00 with MOQ: 20pcs.
We prefer that you directly reach me by Google with keywords: (soartec.mybranchbob) PLS MUST leave your company contact details in your inquirires, otherwise we will consider yours scams. Thanks for understanding.
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message