Construction Tools in bulk on Qoovee
- Rebar
- Construction timber
- Construction blocks
- Construction mixtures
- Construction stones
- Floor coverings
- Roofing materials
- Glass and glass products
- Heating equipment and supplies
- Wood design
- Insulation materials
- Plastic products
- Paints & varnishes
- Ventilation equipment
- Metal products
- Polymeric materials
- Plumbing & sewerage
- Abrasives
- Self-adhesive film
- Reinforced concrete products
- Ceramic tiles
- Marble
- Lumber
Sort by:
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill.
Specification:
1. Free Speed:3000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:540L/min
5. Net Weight:895g
6. Tool Length:240mm
7. Collet Size: 6mm (1/4")
8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T)
9. Packing:10pcs/10kg/11kg/0.53'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
60mmx260mm
Miniaturized, lightweight and 1.3 kgs only.
Handle angle can adjusting range reach 180.
Adjustable guide shaft.
Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution.
Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc.
From grind to the surface polishing all can application.
Rid of surface scar and deckle edge.
Stainless steel surface tiny mark processed.
Specification:
1. Free Speed:17000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:650L/min
5. Net Weight:1300g
6. Tool Length:1900mm
7. Exhaust System: Rear
8. Packing:10pcs/15kg/16kg/2.3'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Rubber sleeve keeps hands from getting cold or slip
Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to
the tool.
Front thumb-adjustable water knob enhances the tool control.
No visible water tube and screw make a seamless smooth touch and no more break risk when dropping.
Cast from aircraft aluminum.
The watertight sealed bearings provide long life and smooth rotational speeds.
The water and air controls are simple to use and conveniently located.
Rear air vent removes exhaust through a hose protector, away from operator's hands.
The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet!
Detachable rotor and gear design brings you an economical repair
Specification:
1. Free Speed:4500 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:660L/min
5. Net Weight:1220g
6. Tool Length:235mm
7. Exhaust System: Front
8. Packing:10pcs/21kg/22kg/1.38'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface.
It can purge hardened surface of metal that made from discharge electricity quickly.
Long life, high speed, light weight and trouble free.
to the processing of footwear, mold and woodworking industries
Specification:
1. Strokes Per Minute:3400 spm
2. File Shake Dia:5mm
3. Stroke Length:5mm
4. Air Inlet:1/4"
5. Air Pressure:6kg/cm2
6. Air Consumption:150L/min
7. Net Weight:580g
8. Tool Length:700mm
9. Packing:10pcs/8kg/9kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
Flux Chipper it's powerful for exerting and chisel is suitable to dismantle.
It's was designed specially to use for a long time. And suitable for boat, machine and
large instrument to clear off the rust and adhesion underside.
Specification:
1. Blow Per Minute:3000 b/min
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:200L/min
5. Net Weight:1800g
6. Tool Length:230mm
7. Packing:5pcs/11kg/11.5kg/0.4'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
Needle Scaler powerful for exerting and chisel is suitable to dismantle.
It's was designed specially to use for a long time. And suitable for boat, machine and
large instrument to clear off the rust and adhesion underside.
Specification:
1. Blow Per Minute:3000 b/min
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:200L/min
5. Net Weight:2590g
6. Tool Length:385mm
7. Needle:19 pcs
8. Packing:5pcs/14kg/14.5kg/0.4'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
The 3” PAD supply various of sponge and wool-wheel for partial.
Small volume, light weight, low noise. It’s suitable for the small area to smooth.
A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.
Specification:
1. Free Speed:2500 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:790g
6. Tool Length:160mm
7. Packing:20pcs/20kg/21kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind.
Long life, high speed. Light weight and trouble free.
A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.
Specification:
1. Free Speed:15000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:650g
6. Tool Length:160mm
7. Packing:20pcs/18kg/19kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
A lot of appurtenances to supply the various of sandpaper and burnishes for process.
It was designed specially to use for a long time.
Volume is small, the weight is light and the rotational speed is fast.
There are three kind orbital diameter can choose.(0.75mm, 1.5mm, 3mm)
It’s suitable for burnishes that cannot grind the detailed polish and useful for process
in difficult reach area, mold and woodworking.
Specification:
1. Free Speed:13000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:815g
6. Tool Length:180mm
7. Packing:20pcs/21kg/22kg/1.2'
8. SM01N:Orbital Diameter:3mm
9. SM01NA:Orbital Diameter:1.5mm
10. SM01NB:Orbital Diameter:0.75mm
USD
182.0/pcs
Product Features: Blade with spring installed to prevent locking or power cut problems. Power Regular position with 3 forward and 3 reverse positions. *Product Specifications - Model: WS-2066. Mechanism: Twin Hammer. Standard. Bolt diameter: 30 (mm). Square drive: 3/4 (inch). Max. Torque 5s: 2000 (ft-lb). Exhaust system: Handle. Regulator: 6 - position. Freewheel speed: 7500 rpm. Price: $182.00 with minimum order: 50 pieces.
We prefer that you directly reach me by Google with keywords: (soartec.mybranchbob) PLS MUST leave your company contact details in your inquirires, otherwise we will consider yours scams. Thanks for understanding.
USD
310.0/pcs
*Product Name: Air-cut Pistol Screwdriver.*Model: WX-3R35PBP.*Free Speed: 2200(RPM) *Torque Range: 3~20(kgf-cm) *Screw Diameter: M2.4~M4, 5 . *Self-tapping screw diameter: M2.0 ~ M3.5. *Handle Diameter: 31mm.*Air Hose Size: 6.35 (mm)**Price: $310.00 with MOQ: 20pcs.
We prefer that you directly reach me by Google with keywords: (soartec.mybranchbob) PLS MUST leave your company contact details in your inquirires, otherwise we will consider yours scams. Thanks for understanding.
USD
48.87/pcs
*Product Features: *Compact design, ideal for working in confined workspaces. *Safety triggers are designed to prevent accidental starting and provide operator protection. *Suspension reduces vibration and lightweight design reduces hand fatigue. *One-handed operation for optimal maneuverability while performing your tasks. Rear exhaust design for improved ventilation. *Product Specification: Model: WX-451 Stroke: 10mm. Blows per minute: 10,000 Air consumption: 7.6 cubic meters feet per minute UAZ: 80 (dB(A)) Length: 200 mm. Price: USD 48.87 FOB TAIWAN per 100 pcs.
We prefer that you directly reach me by Google with keywords: (soartec.mybranchbob) PLS MUST leave your company contact details in your inquirires, otherwise we will consider yours scams. Thanks for understanding.
Dmitrij Grigorov
Russia
USD
100.0/pcs
We offer a huge selection of goods of any kind at the cheapest wholesale prices, we have all positions:
1. Products for children
2. Fitness and yoga products
3. Shoes
4. Men's clothing
5. Household goods (goods for comfort, sorting, interior, kitchen, bathroom, dishes, pillows, bed linen, chairs
6. All equipment
7. Bags, backpacks
8. Medicine, care, cosmetics
9. Ring lamps, chandeliers lamps
10. Stationery
11. Fishing goods
FREEMAN
Kazakhstan
USD
250.0/pcs
The giraffe sander DWS 225B in a case is an electric sander designed for sanding various types of surfaces. Mainly used for interior renovation and finishing work. Design features The working part of the Oxy DWS 225B machine is a replaceable grinding disc, which is driven by an electric motor. The device supports the installation of a disc with a diameter of up to 225mm, which is enough to perform most jobs related to grinding surfaces. The motor power is 850 W, the disk rotation speed is from 750 to 1850 rpm. The rotor speed can be set using a convenient electronic regulator on the handle of the device. The movable sanding head is mounted on a telescopic handle, the length of which can be adjusted between 110 and 180 cm. Thus, the Oxy DWS 225B sander is ideal for use in rooms with a standard ceiling height of around 3 meters.
Vistatoolstore
Singapore
USD
185.0/pcs
FEATURES + BENEFITS Impact drill/driver delivers up to 1200 in-lbs of force. torque. Two speeds: 0-550 rpm; 0-2000 rpm for higher drilling speed. Impact drill mode: 32,000 strokes per minute 1/2 in. 1/4" all-metal ratchet chuck. hex impact tool delivers up to 1800 in-lbs of force. screwdriving torque for faster screwdriving 0–3000 rpm. Impact Mode: 0-3700 ipm 4-mode drive control gives you more control over power and speed. Both tools feature a Powerstate brushless motor for constant torque. Both tools are equipped with RedLink Plus intelligent features to prevent tool and battery damage due to overload or overheating. RedLithium batteries provide more work per charge and extend the life of the kit. The kit includes 2x M18 RedLithium XC 5.0Ah batteries, multi-voltage charger, 2x belt clips, 2x bit holders, side handle and carrying case. 66452 Trademark of Milwaukee. Manufacturer's Warranty 5-year limited warranty. Shipping weight 16.5 lbs. Volt 18. Battery type Li-ion tools included (qty) 2 batteries (qty) 2. Charger included Yes. Storage type: Plastic case.
Toolpowerstore
Singapore
USD
227.0/pcs
A brand new product, RIDGID introduces a 12" 15 amp sliding end miter saw with double bevel, 70° power and LED cut line indicator. This saw features an industry-leading 70° bevel range, adjustable bevel and bypass bevel locks, LED cut line indicator, and work light. FEATURES Adjustable miter and bevel stops with bypass: for quick adjustment of most common angles Powerful 15 amp motor: Powerful motor to handle the toughest materials Built-in dust collection port: Works with conventional/dry vacuum adapters Mounting holes for crown stop: Compatible with regular and RIDGID crown molding stops (not included) Blade brake: Stops blade for faster transition between cuts Positive bevel: Quick adjustment of positive stops for most common angles 0°, 15°, 22.5°, 33 .9° and 45° left and right Positive corner stops: quick adjustment of positive stops for the most common angles 0°, 15°, 22.5°, 31.6°, 45°, 60° and 67.5° left and right WHAT'S INCLUDED Miter saw blade Dust bag Material Clamping blade Wrench Operator's manual
LLC "Int-trade"
Russia
Specify the price
Article: 056356VLP 5220 is a semi-professional cordless drill driver that can withstand heavy loads. Designed to work with various fasteners: screws, screws, bolts. Has a drilling function. The model supports 2 speeds of rotation: the first for twisting, the second for drilling, which allows you to customize the tool for various jobs. The metal keyless chuck allows you to change the tooling in a couple of seconds, no need for additional tools. LED illumination of a working zone will help to work in badly lit room or in twilight. The ergonomic handle with anti-slip coating provides a secure grip, which guarantees safe work and good control of the tool. Thanks to a durable case made of high-quality plastic, the tool is easy to store and transport. Powered by FUSE 18V Li-ion battery. All FUSE batteries are compatible with all FUSE cordless tools. FUSE rechargeable batteries can be stored charged for several months without fear of self-discharge and loss of power, for your convenience, each battery is equipped with a charge indicator, this makes it easy to control the remaining operating time. Complete set: FUSE rechargeable battery 18 V 1.5 Ah - 2 pcs , charger 2.4 A , set of bits and drills , plastic case . Characteristics Idling speed0-450 / 0-1600 rpm Maximum torque40 Nm Battery type lithium-ion Voltage18V KitZ/U and 2 batteries
Evolution Power Tools
United States of America
USD
848.0/pcs
Built for professionals, the S355MCS Mitering Chop Saw from Evolution is the first 14” TCT industrial Chop Saw that allows you to produce accurate miter cuts without having to reposition the workpiece.
Designed to tackle heavy cuts in oversized metal pieces, the S355MCS Mitering Chop Saw features a precision adjustable miter table, 3-position saw head, and our unique, height adjustable front clamp rail assembly. It delivers precise and quick angle adjustment for easy set-up and a powerful clamping mechanism to ensure quality, repeatable cuts every time.
With a powerful 15A motor, easy ambidextrous controls, and a Bench Dog compatible base plate with a tough knurled back fence, the S355MCS Mitering Chop Saw is easy to rely on for your toughest jobs.
LLP "RILLA"
Kazakhstan
USD
248.23/pcs
BOSCH sets are available for sale. direct deliveries from the factory, original.
Electronics 4 u LTD
United States of America
USD
650.0/pcs
Milwaukee M18 18V Lithium-Ion Cordless Combo Kit 10-Tool, 2 Batteries, Charger.
* Brand new in a sealed box.
Get the job done with this Milwaukee M18 18V Lithium-Ion Cordless Combo Tool Kit. Great for DIYers and pros, it features a Milwaukee 4-pole frameless motor for lasting use. Redlink Plus intelligence prevents it from overloading, overheating and over discharging.
Milwaukee 4-pole frameless motor: features a robust design for longer life, more power and more run time than any brushed competitor
All-metal gear case and chuck: provide maximum impact and shock durability
Redlink intelligence: advanced overload protects the tool against abusive situations and provides maximum life
175 plus trade focused solutions powered by the M18 battery platform
M18 cordless drill/driver with Milwaukee 4-pole frameless motor delivers 525 in. lbs. of peak torque, 0-550/0-1,700 RPM and 29,000 BPM
M18 1/4 in. hex impact with the Milwaukee 4-pole frameless motor delivers 1400 in. lbs. of torque
M18 Hackzall provides superior 1-handed control and versatility over a standard reciprocating saw
M18 work light provides a fold-away hook for hands free use and a 135 degree rotating head to direct light at the work area
M18 6 in. circular saw delivers 3,500 RPM with magnesium upper and lower guards for maximum durability
M18 compact blower delivers the fastest jobsite cleanup
M18 1/2 in. high torque impact wrench with friction ring delivers 450 ft.-lbs. of torque
Milwaukee M18 cordless multi-tool cuts up to 50% faster and delivers up to 2x more cuts per charge than the competitors
Includes: (1) 2606-20 M18 brushed drill/driver; (1) 2656-20 M18 1/4 in. impact driver; (1) 2625-20 M18 Hackzall; (1) M18 circular saw; (1) M18 4-1/2 in. cut-off/grinder; (1) 2615-20 M18 RAD; (1) 2626-20 M18 multi-tool; (1) 2663-20 1/2 in. square drive impact wrench; (1) 2735-30 M18 LED work light; (1) 0884-20 M18 compact blower; (1) 48-11-1828 M18 XC Redlithium battery pack; (1) 48-11-1815 M18 compact Redlithium battery pack; (1) 48-59-1812 M12-M18 multi-voltage charger
Accessories included: (1) general purpose 6-1/2 in. circular saw blade; (1) general purpose Sawzall blade; (2) contractor bags
Electronics 4 u LTD
United States of America
USD
700.0/pcs
Features
18-Volt 1/2-Inch Hammer Driver/Drill - XPH10Z
Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque
Variable 2-speed design (0-600 and 0-1,900 RPM) covers a wide range of drilling, driving and hammer applications
Compact and ergonomic design at only 7-3/4" long
Weighs only 3.4 lbs. with battery (battery not included) for reduced operator fatigue
Rubberized soft grip provides increased comfort on the job
Dual L.E.D. lights with afterglow illuminate the work area
All metal gears for increased durability
18-Volt 1/4-Inch Impact Driver - XDT11Z
Variable speed (0-2,900 RPM and 0-3,500 IPM) and 1,460 in.lbs. of torque for a wide range of fastening applications
4-pole motor with innovative 4-brush design delivers increased RPM without decreasing torque
All metal gear housing for increased job site durability
Compact and ergonomic design at only 5-3/8" long
Weighs only 2.8 lbs. with battery (battery not included) for reduced operator fatigue
Convenient one-touch 1/4" hex chuck for quick bit changes
Rubberized soft grip provides increased comfort on the job
18-Volt 1-1/4-Inch Reciprocating Saw - XRJ04Z
Makita-built variable speed motor delivers 0-2,800 strokes per minute and a 1-1/4" stroke length for faster cutting
"Tool-less" blade change system allows for faster blade installation and removal for increased productivity
Variable speed trigger for added convenience
Compact and ergonomic design at only 19-1/8" long
Weighs only 8.3 lbs. with battery (battery not included) for reduced operator fatigue
Rubberized soft grip handle provides increased comfort on the job
Large two-finger trigger for operator convenience
Electric brake for maximum productivity
Refined crank mechanism design minimizes blade deflection and reduces vibration
18-Volt 6-1/2-Inch Circular Saw - XSS02Z
Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood
Heavy gauge, precision machined base for smooth, accurate cutting and added durability
50-Degrees maximum bevel cutting capacity
Weighs only 7.3 lbs. with battery (battery not included) for reduced operator fatigue
6-1/2" blade delivers a 2-1/4" cutting capacity for a wide range of cutting applications
Rubberized soft grip handle provides increased comfort on the job
18-Volt 4-1/2-Inch Cut-Off/Angle Grinder - XAG03Z
Automatic Speed Change technology adjusts speed and torque during operation for optimum performance
The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
Compact and ergonomic design at only 14-1/4" long
Weighs only 5.5 lbs. with battery (battery not included) for reduced operator fatigue
Rubberized soft grip provides increased comfort on the job
Slide switch with lock-on for operator convenience
3-stage L.E.D. gauge indicates battery charge level
Soft start suppresses start-up reaction for smooth start-ups and longer gear life
Spiral bevel gears for smoother rotations and a more efficient transfer of energy
Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on
Efficient internal cooling is engineered for optimum performance
Wire mesh intake covers are engineered to prevent debris from entering motor
18-Volt 1/2-Inch Impact Wrench - XWT04Z
Makita-built motor delivers 325 ft.lbs. of Max Torque, with 1,600 RPM and 2,200 IPM for superior fastening power
Shock absorbent handle protects battery housing for extra durability
Rocker switch for forward/reverse operation
Rubberized soft grip handle provides increased comfort on the job
Compact and ergonomic design at only 10-1/2" long
Weighs only 7.5 lbs. with battery (battery not included) for reduced operator fatigue
Built-in L.E.D. light illuminates the work area
18-Volt 1/2-Inch Impact Wrench - XWT05Z
Makita-built 4-pole motor delivers 170 ft.lbs. of Max Torque
0-2,100 RPM and 0-3,200 IPM for a wide range of fastening applications
Compact and ergonomic design at only 6-1/2" long
Weighs only 3.8 lbs. with battery (battery not included) for reduced operator fatigue
Built-in L.E.D. light with afterglow illuminates the work area
Ergonomic shape fits like a glove with even pressure and easy control
Rubberized soft grip handle provides increased comfort on the job
18-Volt 7/8-Inch Rotary Hammer - XRH04Z
Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
Built-in clutch reduces gear damage by automatically disengaging gears if bit binds
Faster drilling with synchronized RPM and BPM
Job site tested shock absorbent handle protects the battery housing for extra durability
One-touch sliding chuck for quick bit changes
Chisel rotates 360-Degrees with 40 different positions
Compact and ergonomic design at only 16-3/8" long
18-Volt 1/4-Inch Hex Drywall Screwdriver - XSF03Z
BL Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
Push Drive Technology ? in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
Ergonomically designed rubberized pistol grip with large 2-finger trigger for increased comfort
Adjustable nose piece delivers consistent screw depth
Lock-on button for continuous use
Compact and ergonomic design at only 9-7/8" long
3-stage L.E.D. gauge indicates battery charge level
18-Volt 3/8-Inch Angle Drill - XAD01Z
Makita-built 4-pole motor delivers 121 in.lbs. of Max Torque
Variable speed (0-1,800 RPM) for a wide range of drilling and driving applications
3/8" keyed metal chuck for improved bit gripping power
Compact 2-5/8" angle head height for use in close quarters
Compact design at only 12-3/8" long
Weighs only 4.0 lbs. with battery (battery not included) for reduced operator fatigue
Built-in L.E.D. light with afterglow illuminates the work area
Large paddle switch and soft grip provide increased comfort on the job
18-Volt L.E.D Lantern/Flashlight - DML185
Three L.E.D. lighting modes: 360-Degrees lantern, 180-Degrees lantern or flashlight
360-Degrees lantern mode provides 620 lumens; 180-Degrees lantern mode provides 310 lumens; flashlight mode provides 90 lumens
180-Degrees-360-Degrees lantern lighting allows the user to select between entire work area or specific task illumination
Up to 11 hours of continuous illumination in 360-Degrees lantern mode with a 5.0Ah LXT? battery (battery sold separately)
Up to 21 hours of continuous illumination in 180-Degrees lantern mode with a 5.0Ah LXT? battery (battery sold separately)
Up to 59 hours of continuous illumination in flashlight mode with a 5.0Ah LXT? battery (battery sold separately)
Compact and ergonomic design at only 14-3/8" tall
Metal hang hook swivels 360-Degrees and folds away for added convenience
Weighs only 2.1 lbs. with battery (battery not included) for reduced operator fatigue
Rubberized soft grip provides increased comfort on the job
18-Volt Xenon Flashlight - DML185
Xenon bulb for 4,500-lux brightness
4-position head pivots for versatility
Compact and ergonomic design at only 11-1/8" long
Includes shoulder strap and 2 bulbs
Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger (battery and charger sold separately)
Rubberized soft grip provides increased comfort on the job
An ideal addition to any toolbox or workshop
18-Volt 179-Mph Cordless Blower - DUB182Z
Variable speed (0-18,000 RPM) for optimum speed control
Up to 12 minutes of continuous operation from a single charge at high speed
Compact and ergonomic design at only 20-3/4" long
Weighs only 3.9 lbs. with battery (battery not included) for reduced operator fatigue
Rubberized soft grip handle for increased operator comfort
Makita-built variable 3-speed motor produces a maximum air velocity of 179 MPH
A perfect addition to any gangbox or tool box
18-Volt Job Site Radio - XRM05
Delivers rich stereo sound from 2 powerful 3.5 in. side-firing speakers
1 auxiliary port for MP3 compatibility and 1 USB port for charging a mobile device
Protective bumpers are engineered for increased durability
Weighs only 10.4 lbs. with battery (battery not included) for easy portability
Menu controls to set FM mono/stereo, clock settings, volume and snooze
Water and dust resistant construction is engineered for improved operation in harsh job site conditions
Illuminated control buttons and dial for superb visibility
18-Volt 5-3/8-Inch Metal Cutting Saw - XSC01Z
Makita-built motor delivers 3,600 RPM for faster cutting
Cuts a wide range of metals including Unistrut?, all thread, channel, conduit, pipe, sheet metal, square tubing, steel and more
Compact, ergonomic design at 13-3/4" long
Weighs only 5.7 lbs. with battery (battery not included) for reduced operator fatigue
Soft grip handle provides increased comfort on the job
Built-in L.E.D. light illuminates the work area
Heavy gauge, precision machined base for smooth, accurate cutting and added durability
What's in The Box
18-Volt 1/2-Inch Hammer Driver/Drill - XPH10Z
18-Volt 1/4-Inch Impact Driver - XDT11Z
18-Volt 1-1/4-Inch Reciprocating Saw - XRJ04Z
18-Volt 6-1/2-Inch Circular Saw - XSS02Z
18-Volt 4-1/2-Inch Cut-Off/Angle Grinder - XAG03Z
18-Volt 1/2-Inch Impact Wrench - XWT04Z
18-Volt 1/2-Inch Impact Wrench - XWT05Z
18-Volt 7/8-Inch Rotary Hammer - XRH04Z
18-Volt 1/4-Inch Hex Drywall Screwdriver - XSF03Z
18-Volt 3/8-Inch Angle Drill - XAD01Z
18-Volt L.E.D Lantern/Flashlight - DML185
18-Volt Xenon Flashlight - DML806
18-Volt 179-Mph Cordless Blower - DUB182Z
18-Volt Job Site Radio - XRM05
18-Volt 5-3/8-Inch Metal Cutting Saw - XSC01Z
(4) 18-Volt 3.0Ah Lithium-Ion Battery
(2) 18-Volt Lithium-Ion Rapid Optimum charger
Tool Bag w/ Wheels - 831269-3
Tool Bag - 831284-7
Owner's Manual
Warranty
3-Year Limited Factory Warranty
30 Day Satisfaction Guaranteed
WHY BUY FROM US?
SECURE & HASSLE-FREE SHOPPING
All items are covered by manufacturer warranty.
FAST SHIPPING
Most orders delivered in 1-3 business days.
CUSTOMER SERVICE
Call us toll free: 1-800-629-3325
SATISFACTION GUARANTEED
All our sales are backed by a 30-day satisfaction guarantee.
SPECIFICATIONS
Sku
XT1501
Brand
Makita
Voltage
18v
Amp Hour
3.0Ah
Tool Count
15
Shipping Weight
95 lbs.
18-VOLT 1/2-INCH HAMMER DRIVER/DRILL - XPH10Z
Drive Size
1/2 in.
Drive Type
Keyless
Capacity (Steel)
1/2 in
Capacity (Wood)
1-1/2 in.
Capacity (Masonry)
1/2 in.
No Load Speed
0 - 600 / 0 - 1,900 Rpm
Blows Per Minute
0 - 9,000 / 0 - 28,500 Bpm
Max. Torque
380 in-lbs.
Length
7-3/4 in.
Product Weight
3.4 lbs.
18-VOLT 1/4-INCH IMPACT DRIVER - XDT11Z
Drive Size
1/4 in.
Drive Type
Hex
No Load Speed
0 - 2,900 Rpm
Impacts Per Minute
0 - 3,500 Ipm
Max. Torque
1,460 in-lbs.
Length
5-3/8 in.
Product Weight
2.8 lbs.
18-VOLT 1-1/4-INCH RECIPROCATING SAW - XRJ04Z
Length of Stroke
1-1/4 in.
Max. Cutting Capacity(Wood w/ 12 in. Blade)
10 in.
Max. Cutting Capacity (Pipe)
5-1/8 in.
Strokes Per Minute
0 - 2,800 Spm
Length
19-1/8 in.
Product Weight
8.3 lbs.
18-VOLT 6-1/2-INCH CIRCULAR SAW - XSS02Z
Blade Diameter
6-1/2 in.
Arbor
5/8 in.
Max. Cutting Capacity at 90-Degrees
2-1/4 in.
Max. Cutting Capacity at 45-Degrees
1-9/16 in.
No Load Speed
3,700 Rpm
Length
13-5/8 in.
Product Weight
7.5 lbs.
18-VOLT 4-1/2-INCH CUT-OFF/ANGLE GRINDER - XAG03Z
Grinding Wheel
4-1/2 in.
No Load Speed
8,500 Rpm
Spindle Thread
5/8 in. - 11 UNC
Lock On Switch
Yes
Lock Off Switch
No
Grinder Switch Type
Body Grip/Slide
Length
14-1/4 in.
Product Weight
5.5 lbs.
18-VOLT 1/2-INCH IMPACT WRENCH - XWT04Z
Drive Size
1/2 in.
Drive Type
Square
No Load Speed
1,600 Rpm
Impacts Per Minute
2,200 Ipm
Max. Torque
325 ft-lbs.
Speed Power Selection
1
Length
10-1/2 in.
Product Weight
7.5 lbs.
18-VOLT 1/2-INCH IMPACT WRENCH - XWT05Z
Drive Size
1/2 in.
Drive Type
Square
No Load Speed
0 - 2,100 Rpm
Impacts Per Minute
0 - 3,200 Ipm
Max. Torque
170 ft-lbs.
Length
6-1/2 in.
Product Weight
3.8 lbs.
18-VOLT 7/8-INCH ROTARY HAMMER - XRH04Z
Chuck Type
SDS-Plus
Max. Capacity (Concrete Drilling)
7/8 in.
Optimum Range (Concrete Drilling)
5/32 in. - 1/2 in.
Impact Energy
1.4 ft-lbs.
No Load Speed
0 - 1,200 Rpm
Blows Per Minute
0 - 4,00 Bpm
Length
16-3/8 in.
Product Weight
7 lbs.
18-VOLT 1/4-INCH HEX DRYWALL SCREWDRIVER - XSF03Z
Drive Size
1/4 in.
Drive Type
Hex
No Load Speed
0 - 4,000 Rpm
Length
9-7/8 in.
Product Weight
3.8 lbs.
18-VOLT 3/8-INCH ANGLE DRILL - XAD01Z
Chuck Type
3/8 in.
Chuck Size
Keyed
Capacity (Steel)
3/8 in.
Capacity (Wood)
1 in.
No Load speed
0 - 1,800 Rpm
Max. Torque
121 in-lbs.
Handle
Angle
Length
12-3/8 in.
Product Weight
4 lbs.
18-VOLT L.E.D LANTERN/FLASHLIGHT - DML185
Brightness
180 Lumens
Run Time
Up to 7.5 Hours
Bulb Type
Xenon
Length
11-1/8 in.
Product Weight
2.1 lbs.
18-VOLT XENON FLASHLIGHT - DML806
Brightness
240 Lumens
Run Time
Up to 59 hours
Bulb Type
12 LED
Length
14-3/8 in
Product Weight
2.1 lbs.
18-VOLT 179-MPH CORDLESS BLOWER - DUB182Z
Max. Air Volume
91 Cfm
Max. Air Velocity
179 Mph
No Load Speed
0 - 18,000 Rpm
Length
20-3/4 in.
Product Weight
3.9 lbs.
18-VOLT JOB SITE RADIO - XRM05
Bluetooth Compatibility
Yes
Mp3 Compatibility
Yes
Run Time
Up to 20 hours
Length
13 in.
Width
8.8 in.
Height
15 in.
18-VOLT 5-3/8-INCH METAL CUTTING SAW - XSC01Z
Blade Diameter
5-3/8 in.
Arbor
5/8 in.
Max. Cutting Depth
2 in.
No Load Speed
3,600 Rpm
Length
Wolfey Traders Ltd
United Kingdom
USD
450.0/pcs
15 Pieces Set Makita 18 Volt Cordless Combo Kit
Kit includes:
18V LXT 1/2" Hammer Driver-Drill
18V LXT Impact Driver
18V LXT Recipro Saw
18V LXT 6-1/2" Circular Saw
18V LXT Brushless 4-1/2" Cut-Off/Angle Grinder
18V LXT 1/2" Impact Wrench
18V LXT 1/2" Impact Wrench
18V LXT 7/8" Rotary Hammer
18V LXT Brushless 4,000 Rpm Drywall Screwdriver
18V LXT 3/8" Angle Drill
18V LXT L.E.D. Lantern/Flashlight
18V LXT Xenon Flashlight
18V LXT Blower
18V LXT JobSite Radio
18V LXT 5-3/8" Metal Cutting Saw
4) 18V LXT Lithium-Ion 3.0Ah Battery
2) 18V LXT Lithium-Ion Rapid Optimum Charger
Manufacturer Warranty: 5-year limited warranty on tool, battery and charger
ONLINE BE TO BE TRADING STORE LIMITED
United States of America
USD
500.0/pcs
100% Safe Delivery
100% Products Quality Production
100% On-Time Shipment Protection
100% Payment Protection
We offer free shipping and delivery to all customers.
Delivery is made directly to your doorstep.
Delivery takes just 3-5 working days.
Specify the price
🔥 We fix prices until the end of the month 📌 There is a discount when calling from the Site -7% 📌 We provide after-sales service 📌 We deliver throughout Russia and the CIS ➖➖➖➖ 📲 Do not waste time looking, you have already found us! ➖➖➖➖ Why us? ✅ Experience since 2011 ✅ Guarantee from 12 months ✅ Goods have quality certificates ✅ Compliance with GOST R, ISO, TR CU declarations ✅ Documentation is provided ✅ Our equipment is used in shipbuilding, aircraft building, RosAtom ➖➖➖➖ ⚡ Intelligent Robot Systems (IRS) ) is the largest supplier of welding equipment and consumables. ⚡ We design, develop and install any robotic systems and equipment for various areas of industrial production at enterprises in Russia and the CIS countries. ⚡ Our staff of high-class engineers has more than 50 people. ⚡ We supply high-tech equipment for production. ➖➖➖➖ 💙In order not to lose our contacts, add the announcement to your favorites. ➖➖➖➖ Product features 👉Holding force from 20kg to 4000kg; 👉Weight from 30 g to 2500 g; 👉Clamp material: galvanized, hardened or stainless steel. ➖➖➖➖ 📲 It's easier to ASK than to think. Call❗ ➖➖➖➖ Other product names: Mechanical clamps, Modular clamps, Pneumatic clamps, Hydraulic clamps
Specify the price
🔥 We fix prices until the end of the month 📌 There is a discount when calling from the Site -7% 📌 We provide after-sales service 📌 We deliver throughout Russia and the CIS ➖➖➖➖ 📲 Do not waste time looking, you have already found us! ➖➖➖➖ Why us? ✅ Experience since 2011 ✅ Guarantee from 12 months ✅ Goods have quality certificates ✅ Compliance with GOST R, ISO, TR CU declarations ✅ Documentation is provided ✅ Our equipment is used in shipbuilding, aircraft building, RosAtom ➖➖➖➖ ⚡ Intelligent Robot Systems (IRS) ) is the largest supplier of welding equipment and consumables. ⚡ We design, develop and install any robotic systems and equipment for various areas of industrial production at enterprises in Russia and the CIS countries. ⚡ Our staff of high-class engineers has more than 50 people. ⚡ We supply high-tech equipment for production. ➖➖➖➖ 💙In order not to lose our contacts, add the announcement to your favorites. ➖➖➖➖ Product characteristics Pneumatic tool service, industrial and industrial class; ➖➖➖➖ 📲 It's easier to ASK than to think. Call❗ ➖➖➖➖ Other product names: Nut runners, Belt grinders, angle grinders, grinders with collet chucks (drills), straight (radial) grinders, pencil-type micro grinders, pistol drills, straight drills, angle drills , drills for drilling rivets, jackhammers, chipping hammers, pull riveters, threaded riveters.
LLC "Mosdistar"
Russia
USD
2.29 - 152.44/pcs
The diamond blade for reinforced concrete belongs to the professional segment series. Size range from 115-460 mm
PiT
Kyrgyzstan
Specify the price
Wholesale high quality power tools
Drills screwdrivers perforators, milling cutters and TP
Generators from 1 kW to 400 kW and above
USD
10.0/pcs
Nippers, also known as pliers, are of different types. It is used in crafts, industry and life.
USD
9.0/pcs
Nippers, also known as pliers, come in different varieties. It is used in crafts, industry and life.
Kit Seiection
Russia
Specify the price
Saws, hacksaws, jigsaws for working on wood and plywood. WHOLESALE from 1 piece (you do not need to redeem 3-5-10 products in order to get wholesale prices, wholesale prices will be immediately from 1 pc.) --- The warehouse is located in Moscow, shipment on the day of order.
TsvetMetInstrument LLC
Russia
Specify the price
The company TsvetMetInstrument LLC offers to buy from stock it manufactures and produces under the order spark-safe fitting and assembly tools - hammers, sledgehammers made of alloys of copper, brass, bronze, aluminum, both serially and individually for each customer. The TsvetMetInstrument company always has a wide range of non-ferrous metal products: stainless steel, special alloys, galvanized metal products, ferroalloys, welding wires and electrodes, flux solder tin, babit, lead, copper products, brass, bronze aluminum. We guarantee high quality products, low prices, the most favorable system of discounts for you, an individual approach to each client, short shipment times, delivery throughout Russia and the CIS countries. We have extensive production experience. Our production of intrinsically safe tools has established itself well in the market, we are known and trusted. Our catalog contains models for different purposes. All types of goods are covered by a guarantee. We do not work for the sake of acquiring a one-time profit, but for the construction of a powerful production group capable of quickly solving any problems of the Customer. A well-functioning delivery system allows you to deliver the purchased goods to you in the shortest possible time or by reliable transport companies that have proven themselves in the efficiency and safety of the goods sent to the customer!
LLC RU Elktronics
Russia
Specify the price
We work from stock and on order, we have our own production and 2 offices in Southeast Asia, as well as a large warehouse in the Moscow region and an office in Moscow, complete set from 2 days.
Workstore
Ukraine
USD
14745.0/pcs
The UZ 18 Hardworker machine is one of the most powerful bevelling machines with the
automatic feed in the market. It is suitable not only for workshops, but also for assembly
operations. It has a continuous working angle adjustment system. Thanks to the special
design of the drive system, the UZ 18 Hardworker is also suitable for tougher materials. The
machine is equipped with the automatic feed. Working with UZ 18 Hardworker is therefore
very comfortable.
• For steel (strength up to 700 MPa / 101 526 PSI), brass, copper and aluminium.
• For bevelling material with minimum dimensions - width 70 mm / 2.75 in, length 150
mm / 5.9 in, thickness 6 mm / 0.23 in.
• Thickness of bevelled material 6 to 40 mm / 0.23 to 1.57 in.
• The bevel angle is easily adjustable from 15° to 50° - smoothly, without the need to
replace any part.
• The equipment is capable of performing double-sided bevelling (X, K) without the
need for material handling.
• Easy connecting to the 3D Manipulator for easier operation and handling.
• The machine is equipped with an automatic feed.
• The possibility of stationary and mobile use.
• The machine works on large workpieces without support.
• Smaller parts of the material are inserted directly into the machine.
• An advantageous price when purchasing UZ 18 Hardworker together with the 3D Manipulator.
Technical data:
Max. bevel width: 18 mm / 0.71 in (600 MPa / 87 022 PSI)
Continuously adjustable angle: 15° - 50°
Thickness of bevel. material: 6 to 40 mm / 0.23 to 1.57 in
Engine: 750 W
Feed: 1,9 m/min. / 6.23 ft/min.
Weight: 110 kg / 242.5 lb
Dimensions (WxHxD): 438 x 719 x 644 mm
17.24 x 28.3 x 25.35 in
Included in price:
Bevelling system UZ 18 Hardworker
Tools for operators
Instruction manual
Shandong Kat Drilling Tools Co.,LTD.
Hong Kong
Specify the price
Shandong Kat drilling tools Co., Ltd. is a professional enterprise engaged in rock drilling tools, mining tools and rotary drilling tools.
We are willing to create a better future with high quality and low price products, advanced production technology, perfect after-sales service and honest business philosophy!
The rock drilling tools, down the hole drilling tools and mining machine tools produced by the company are widely used in the fields of tunneling, drilling, mining, railway, highway, hydropower and other basic energy construction.
USD
55.0/pcs
Cutting machine:
Rated voltage (V): 220
Rated frequency (Hz): 50
Cutting disc diameter (mm): 110
Max. cutting depth (mm): 30
Rated power (w): 1200
Rated speed (r / min): 13000
Net (kg): 3.0
The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Construction Tools from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.