Open chat

Polymeric materials in bulk on Qoovee

LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price USD 0 0
Modular supports - a modular system for fixing hanging heavy objects. The TekhPlast Technologies company sells: modular supports, pads for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products made according to individual parameters. Our company is engaged in the production of various high-strength parts, the operation of which is associated with high force loads, friction and mechanical stress. Modular props are blocks used to construct temporary structures designed to support heavy objects during construction, moving objects, laying pipes, restoring vehicles, stabilizing cranes and other equipment. The modular design of the blocks makes it possible to create support to stabilize the load and level the equipment on various surfaces. The supports are made of high-strength plastic with a pyramidal pattern, which ensures high reliability and stability of the structure. They are easy to install, do not splinter, unlike wood, and are resistant to fuel, oil and most chemicals. • Benefits of using modular supports: • Improved robust design for higher load limits; • Non-conductive plastic, resistant to oil, fuel and most chemicals; • Safety (does not split like wood); • Pyramid tread helps create a more stable and non-slip working surface; • Ideal for use with heavy equipment, cranes, machinery and vehicles; • Quick and easy installation and dismantling, presence of handles; • Durability. With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price USD 0 0
Isotrack road slabs (mats) are innovative polymer road slabs for laying temporary pavement. The TekhPlast Technologies company sells: modular supports, pads for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products made according to individual parameters. Our company is engaged in the production of various high-strength parts, the operation of which is associated with high force loads, friction and mechanical stress. Our catalog presents three series of composite mats, which differ in area, load parameters for which they are designed, and conditions of use. With their help, temporary access roads are installed on different sections of roads, as well as sites for special equipment are organized at construction sites, warehouses, in wetlands, parking and pedestrian areas, etc. We sell designs of the following series: • L – designed for transport and equipment up to 80 tons (light, flexible, easy to operate); • H – withstands special equipment up to 150 tons (for soft soil and hard surfaces); • X – used for coatings with a load of up to 730 tons (high-strength). As a basis for the boards, the manufacturer uses polymer raw materials processed by pressing or extrusion methods. The products undergo quality control and have good performance characteristics. Mat sizes from 1000x2000 mm. The products are frost-resistant and suitable for different climatic conditions. Installation is possible several times, after dismantling they retain their properties. With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price USD 0 0
Linings for outriggers (crane supports) TrigPad (UHMWPE, VMPE) - strong and durable material ensures reliability and safety of equipment installation. The TekhPlast Technologies company sells: modular supports, pads for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products made according to individual parameters. Our company is engaged in the production of various high-strength parts, the operation of which is associated with high force loads, friction and mechanical stress. Pads for outriggers serve to increase the support area of ​​manipulators and cranes during work. They make it possible to avoid damage to the road surface and achieve maximum stability on unstable types of road surface and soil. • Suitable for cranes with lifting capacity up to 400 tons; • Prevent the crane from falling on unstable soils and uneven surfaces; • Protect the road surface from damage; • They have a greater margin of safety compared to analogues, and are not subject to corrosion; • Operating temperature range of PE-1000 from -260 to +80 °C; • Suitable for all models of cranes, aerial platforms and other equipment. With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price USD 0 0
Plates made of polymers: polyethylene, polyamide, polyimide, caprolon, polypropylene, PEEK, HDPE and POM (UHMWPE, HMWPE, HDPE, PEEK, PA-6, POM, PP) The TekhPlast Technologies company sells: modular supports, linings for outriggers, road slabs, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products according to individual parameters. Sheet polymers such as polyethylene, polyamide, polyimide, PETG, PEEK, HDPE and polypropylene are highly durable, chemical resistant and lightweight. They are widely used in various industries such as packaging, medical devices, automotive and electronics. The main advantages of sheet polymers include recyclability, anti-corrosion properties, resistance to ultraviolet radiation and a wide range of operating temperatures. They also have excellent electrical insulation and durability, making them an excellent choice for a variety of engineering applications. Wide range of materials: Ethipol-1000 (PE-1000), Ethipol-500 (PE-500), Pefecton (PEEK), Ethipol-300 (PE-300), polyoxymethylene “ExtraPom” (POM), ABS plastic, PETG, polyamide -12 (PA-12), polyimide, polypropylene (PP), caprolon (PA-6), low-density polyethylene (HDPE), fluoroplastic (F4). With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. There are various sizes and thicknesses of polyethylene sheets in stock and on order. We also manufacture polyethylene parts to customer sizes.
LLC "TechPlast Technologies"
Санкт-Петербург, Russia
Specify the price USD 0 0
Polymer rods: polyethylene, polyamide, polyimide, caprolon, PEEK, HDPE and POM (UHMWPE, HMWPE, HDPE, PEEK, PA-6, POM) The TekhPlast Technologies company sells: modular supports, outrigger pads, road plates, sheet polymers (plates), rods, raw materials for bushings and bearings, guides and seals, polymer products according to individual parameters. Rods made from polymers such as polyethylene, polyamide, polyimide, PEEK, HDPE and POM have high strength, chemical resistance and low thermal conductivity. They are widely used in the production of parts for mechanical engineering, medical devices, electronics and other industries. The main advantages of polymer rods include low density, wear resistance, impact resistance, and the ability to be processed by a variety of methods, including milling, turning, and injection molding. They also have good dielectric strength and biocompatibility, making them an attractive choice for specialized applications such as the medical and electrical industries. Wide range of materials: Ethipol-1000 (PE-1000), Ethipol-500 (PE-500), Pefecton (PEEK), Ethipol-300 (PE-300), polyoxymethylene “ExtraPom” (POM), ABS plastic, PETG, polyamide -12 (PA-12), polyimide, polypropylene (PP), caprolon (PA-6), low-density polyethylene (HDPE), fluoroplastic (F4). With delivery throughout Russia, you can buy all the items listed above at a favorable price from the TechPlast Technologies company. In stock and on order there are various options for the diameter and length of polyethylene rods. We also manufacture polyethylene parts to customer sizes.
Fallen Polymer
Тюмень, Russia
USD 21.48/pcs 21.48
Fallen Polymer - offers wholesale supplies of its own production - a product for the repair of plastic parts made of polypropylene (PP) and its derivatives. Black triangular rod for repairing parts with a thickness of more than 2.5 mm. Suitable for cases when it is necessary to hide traces of repair of black parts. Recommended for professional use. Product for the repair of plastic parts made of polypropylene (PP) and its derivatives. A 10-meter long triangular rod of black color allows you to hide traces of repairs on black parts. This material is perfect for repairing parts with a thickness of more than 2.5 mm. The advantage of packaging in the form of a coil is a solid long rod, when working with which there are no unused sections, it also ensures mobility, compactness, ease of operation and storage. The welding strength of this material is so high that it does not require laying transverse overlaps in any places other than the exit of the seam, which saves filler rod and working time. If you need a material with identical characteristics, but at a more attractive price with a bright blue rod that allows you to work in rooms with limited lighting, we recommend considering the product fp60017. During the repair process, the material has elastic deformation and is welded in the range of 280-330 C, depending on the additives filling the plastic. Reaching the required temperature for welding can be determined visually when a tear-like shine appears on the part being repaired and on the filler rod. If it is necessary to deform the part, it is enough to heat it to a temperature of 160 - 180 C and give it the desired shape. The strength of a repair seam when welded with original Fullen Polymer materials, subject to welding technology, is about 70-80% of the nominal value.
USD 1.0 - 5.5/m
High Performance Nylon And Polyester Screen Filter Mesh For Fuel And Oil Filtration   We provide standard and customized woven mesh fabrics in a wide range of micron, width, length, colors, and treatments to suit different customers’ needs. Both our nylon and polyester mesh fabric solutions possess distinct benefits that make them suitable for kinds of filtration.   Common Applications of Nylon & Polyester Screen Filter Mesh Nylon and Polyester filter mesh are most used in today’s market. The performance of a filter mesh is highly dependent on the yarns woven. Nylon and polyester are synthetic polymers often used to create mesh screens for filtration. While both are flexible, durable, and lightweight, they each have distinct benefits and limitations that impact their suitability for certain applications. Nylon and polyester filter mesh are used in filtration solutions for numerous industrial, commercial, and recreational applications. Sifting and milling Dust collection and separation Fuel and oil filtration in automotive and aerospace systems Filtration systems in refrigerators, dryers, and other home appliances Filtering tests and analysis in laboratory applications Infusion and transfusion filters in medical device              Share Filters Manufacture Capabilities   Our in-house capabilities include enhanced processing such as filter mesh slitting, stamping, tubing, dyeing, injection molding and finishing of products. Share Filters Can Offer the Nylon Filter Mesh, Polyester mesh, PP filter mesh, metallic mesh in Different Types to meet customs' Filtration demands.   Share Filter synthetic meshes can be made from a variety of materials such as polyamide, polyester, polypropylene, etc. You can order by the roll or in cutting shapes. Ultrasonic slitting is also used for manufacturing fabric strips and produces a closed edge with very little material build up at the edge. Our cutting method include Laser cutting, Cold cutting, Hot cutting, Slitting, Punching. Professional cutting using custom made tools that will not damage the materials. Sonic welding are accurate, clean. precision, sleeves and bags for blood filtration, biopsy bag for rosin bag for rosin press are examples of applications that benefit from this technology. Share Filters sewing products are carried out by highly skilled and experienced machinists, which ensure you get the right level of consistent quality. Custom plastic molded filter combine precise filter mesh with polymer plastic. Industry serve: Automotive, Appliances, Food and beverage, Medical, Life Science and Laboratory, etc.     About Us Share Filters has over 20 years of experience developing and manufacturing filter mesh and custom product for our customer's screen and filtration needs. We can offer the filter mesh and filter components services including slitting, cutting, welding, sewing and injection molding. Our customer base comes from a wide variety of industries including – Automotive, Home appliances, Food and beverage, Milling, Medical, Life Science and laboratory, Electronical as well as more general engineering, giving us a wealth of experience in many areas.  
IP "BERK GERDEN"
Ашхабад, Turkmenistan
Specify the price USD
Waterproofing roll fused bitumen-polymer material with a reinforcing base made of polyester fiber (polyester). Thickness from 3 to 5 mm. for the bottom layer of waterproofing, both sides of the material are covered with an easily meltable polymer film; for the top layer of waterproofing, one side of the material is covered with an easily meltable polymer film, the other side - with aluminum foil or coarse-grained slate coating (gray, red, green - to choose from).
USD 2750.0/Ton 2750.0
TPE(Thermoplastic Elastomer) is a kind of Thermoplastic Elastomer material, with high strength, high resilience, injection processing characteristics, a wide range of applications, environmental protection, non-toxic safety, has excellent coloring. Soft touch, weather resistance, fatigue resistance and temperature resistance, superior processing performance, no vulcanization, can be recycled to reduce costs, not only can two injection molding, with PP, PE, PC, PS, ABS and other matrix materials cladding bonding, can also be molded separately.Application: Home appliance shell, handle, grip, etcProduct performance: excellent hand feel, and hard adhesive ABS, PC, PC/ABS, PA6, PA66 and other strong bonding. Non-slip and labor-saving, and easy to color and processing, with a wide range of design space Application scope of oiling series: all kinds of oiling toys, daily articles, etc., widely replace PVC. Product performance: low price, replace PVC first choice, health, safety, environmental protection, easy to grease.   Gm seriesApplication: Stationery, sports equipment, sealing ring, handle, etc Product properties: Excellent hand feel, good UV resistance, chemical resistance and easy coloring and processing, with a wide range of design space.   Functional seriesApplication: Sealing ring, auto parts, handle, gear, etc. Product performance: with good shock absorption, compression resistance, electrical insulation, steel and so on.
USD 1450.0/Ton 1450.0
The basic introduction of butadiene rubber BR9000   Compared with natural rubber and styrene butadiene rubber, butadiene rubber has the characteristics of high elasticity, good cold resistance, low heat generation, good flexure resistance and good dynamic performance. The main disadvantages are poor wet slip resistance, low tearing strength and tensile strength, large cold flow, slightly poor processing performance, and must be used with other types of rubber.   The main uses of butadiene rubber   China's butadiene rubber is mainly used in tires, shoes, high impact polystyrene and ABS resin modification, etc.
USD 1570.0/Ton 1570.0
SBR1502 is a non-polluting styrene butadiene rubber used for light-colored products in the rubber industry, because it is widely used in the manufacture of white edges of tires and soles. Rubber protective cloth, medical equipment and other light-colored products
USD 1050.0/Ton 1050.0
VAE emulsion is widely used as the base material of adhesives.VAE emulsions have good mechanical properties, the mean particle size of emulsions is small, there is a good balance between creep resistance and heat sealing, good wet viscosity and fast curing speed.VAE emulsion has a wide range of bonding properties, in addition to bonding wood, leather, fabric, paper, cement, concrete, aluminum foil, galvanized steel plate and other materials, can also be used as pressure sensitive adhesive and heat sealing adhesive, and for some difficult to bond materials such as polyethylene, polypropylene, polyvinyl chloride, polyester film is with unique bonding property.
USD 1950.0/Ton 1950.0
PMMA SB180 Characteristics:Heat resistant injection stage, high temperature resistance, thermal deformation temperature up to 100°C, mechanical strengthUsage:Out plate, rod, tube; Injection heat resistance grade, especially suitable for motor vehicle indicator light housing/solar lens/electronic surface housing
USD 1650.0/Ton 1650.0
Product name:Carbon BlackAppearance:Pure black powderFeatures:High black degree , light weight , small proportion , small size, high iodine absorption value,  strong tinting strength, blackness strong hiding power, good liquidity, easy to disperse, resistance to ultraviolet ray, prevent aging, etc.Application: Widely used in sealant, leather, color paste, master, plastic, ink, paint, paint, cement, building materials, cosmetics, glass, ceramics and other fields. Packaging: 10kg/bag
USD 3200.0/Ton 3200.0
HANDAN SHIBO NEW MATERIALS CO.,LTD Technical DATA SHEET OF PLA FY201/FY202/FY204/FY401/FY402/FY404  Applied to injection molding and fiber. FY601/FY602/FY604  Applied to Blister, film, sheet, staple fiber. FY801/FY802/FY804  Applied to sheet, film, staple fiber, filament. Properties Sheet Property FY201 FY202 FY204 FY401 FY402 FY404 FY601 FY602 FY604 FY801 FY802 FY804 Desnity 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 1.24 Yellow Index ≤ 10 ≤ 15 ≤ 15 ≤ 10 ≤ 15 ≤ 15 ≤ 10 ≤ 15 ≤ 15 ≤ 10 ≤ 15 ≤ 15 Water % ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 ≤ 0.04 Monomer content % ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 ≤ 0.3 Melt Index (190℃/2.16kg) 30 30 30 18 18 18 10 10 10 4 4 4 D-Content % < 1 2 4 < 1 2 4 < 1 2 4 < 1 2 4 Melt Point ℃ 175 165 155 175 165 155 175 165 155 175 166 155 Glass transition temperature ℃ 60 60 60 60 60 60 60 60 60 60 60 60
USD 1650.0/Ton 1650.0
Product POM M90 Color White Shape Pellets Process Injection molding Polymer Copolymer Features High fluidity, fatigue resistance, high hardness, high rigidity, low wear, low warping, good electrical properties, acid resistance, alkali resistance, chemical resistance, solvent resistance, low mold sediment, antibacterial, food contact grade Application Automotive hood, automotive electronics, automotive external parts, wheels, accessories, gears, valves, valve parts, thin wall products Physical property Standard Value Unit Shrinkage Flow ASTM D995 1.8-2.2 % Water Absorption 23℃ 24hr ASTM D570 0.6 % Melt Index 190℃ 2.16kg ASTM D1238 9 g/10min Mechanical behavior Standard Value Unit Tensile Strength Yield ASTM D638 62 MPa Tensile Modulus ASTM D638 2600 MPa Elongation 23℃ ASTM D638 35 % Flexural Strength 23℃ ASTM D790 87 MPa Flexural Modulus 23℃ ASTM D790 2450 MPa Charpy Notch Impact ASTM D256 6.0 kJ/m2 Thermal performance Standard Value Unit Thermal deformation temperature 1.8MPa ASTM D648 95 ℃ Hardness Standard Value Unit Rockwell Hardness M(Scale) ASTM D785 80   Flame Rating Standard Value Unit UL UL94 HB  
USD 3100.0/Ton 3100.0
TPU 1190 Color Natural Process Injection molding, Extrusion molding, Features Wear resistant grade,Polyester base, Good mechanical properties, Short cycle time Applilcation Pipe, Converyors,High pressure oil tubes, Seals,Screen packs, Wire &Cable, Footwear
USD 2650.0/Ton 2650.0
HANDAN SHIBO  PA6 GF-30  Technical Date sheet Properties Test Method Units Value Physical property Density ISO1183 g/cm3 1.35 Water absorption(23ºC,24hr) ISO62 % 6.3 Moistrue absorption 1.9 Mechanical properties Tensile Modulus ISO527-1/-2 MPa 9500/6000 Tensile strength at break ISO527-1/-2 MPa 180/110 Elongation at break ISO527-1/-2 % 3.5/7 Flexural strength ISO178 MPa 235/ Flexural modulus ISO178 MPa 8600 Charpy impact strength(notched)+23ºC ISO179(1eA) KJ/M2 12/25 Thermal properties Deflection temperature at 1.8MPa ISO75-2 ºC 207 Deflection temperature at 0.45MPa ISO75-2 ºC 220 Melting temperature ISO11357-1/-3 ºC 220 Flammability Flammability UL94   HB
USD 1850.0/Ton 1850.0
HANDAN SHIBO  PA6 GF-30  Technical Date sheet Properties Test Method Units Value Physical property Density ISO1183 g/cm3 1.35 Water absorption(23ºC,24hr) ISO62 % 6.3 Moistrue absorption 1.9 Mechanical properties Tensile Modulus ISO527-1/-2 MPa 9500/6000 Tensile strength at break ISO527-1/-2 MPa 180/110 Elongation at break ISO527-1/-2 % 3.5/7 Flexural strength ISO178 MPa 235/ Flexural modulus ISO178 MPa 8600 Charpy impact strength(notched)+23ºC ISO179(1eA) KJ/M2 12/25 Thermal properties Deflection temperature at 1.8MPa ISO75-2 ºC 207 Deflection temperature at 0.45MPa ISO75-2 ºC 220 Melting temperature ISO11357-1/-3 ºC 220 Flammability Flammability UL94   HB
USD 1950.0/Ton 1950.0
Physical Properties Test Condition Test Method Unit CH65-3R-L CH100-3R-L CH100-0R-L CH210-0-L CH95-0-L Melt Index 300ºC,1.2kg GB/T3682.1-2018 cm3/10min 6.34 9.96 10.37 21.74 9.65 Optical Performance Test Condition Test Method Unit CH65-3R-L CH100-3R-L CH100-0R-L CH210-0-L CH95-0-L Transmittance 2.54mm ASTM D1003-2013 % 90 90.2 89.4 91 90.9 Haze 2.54mm ASTM D1003-2013 % 0.2 3 0.3 0.2 0.2 Impact Performance Test Condition Test Method Unit CH65-3R-L CH100-3R-L CH100-0R-L CH210-0-L CH95-0-L Izod Notched Impact Strength  3mm, 23ºC GB/T1843-2008 KJ/m2 75.4 70.6 69.7 60.1 71 Features Good demoulding performance, Weather resistance, Transparent pellets Good demoulding performance, Weather resistance, Transparent pellets Good demoulding performance, General purpose grade, Transparent pellets High Flow Good demoulding performance, General purpose grade, Transparent pellets Processing Extrusion molding Injection molding Injection molding Injection molding Injection molding Application Sheets Lighting Lamps and Lanterns, Electrical applications Lighting Lamps and Lanterns, Electrical applications Thin wall products Lighting Lamps and Lanterns, Electrical applications
USD 1350.0/Ton 1350.0
ABS DG-417 Injection Molding High Gloss High Impact Usage: TV front case, copier case, telephone case, cosmetic case, tire cover. Price(EXW):1350$/MT Physical properties Test Condition Test Method Data Unit Shrinkage --- ASTM D955 0.5~0.8 % Density 23℃ ASTM D792 1.045 g/cm3 Melt Index  220℃ 10kg ASTM D1238 15.5 g/10min Mechanical properties Test Condition Test Method Data Unit Tensile strength 1/8", 50mm/min ASTM D638 51 MPa Elongation 1/8", 50mm/min ASTM D638 40 % Flexural strength 1/8", 3mm/min ASTM D790 77 MPa Flexural modulus 1/8", 3mm/min ASTM D790 2518 MPa Izod impact  1/8", 23℃ ASTM D256 25 KJ/m2 Hardness Test Condition Test Method Data Unit Rockwell Hardness R(Scale) 23℃ ASTM D785 112   Thermal Test Condition Test Method Data Unit HDT unannealed 1/8",1.8MPa ASTM D648 80 ℃ Vicat 1kg ASTM D1525 99 ℃ UL Test Condition Test Method Data Unit Flame rating 1/8" UL94 HB  
USD 900.0/Ton 900.0
Water Bottle Grade PET YS-W01 Technical Data Sheet Physical Properties Unit Value Density g/cm³ 1.4 Ash % 0.02  Relative Viscosity dL/g 0.812  DEG Content % 1.3  Acetaldehyde ug/g 0.7 Moisture Content % 0.04  '-COOH Content mmol/kg 20  Powder Content mg/kg 17 Heterochromatic Particles particles/500g None Optical performance Unit Value  Color b*   -1.5  Color L*   83 Thermal Performance Unit Value  Melting Temperature ℃ 249  Crystallinity % 52.4  
USD 980.0/Ton 980.0
BRAND APPLICATION S1003 Wire drawing S2040 Fiber K1008 Injcction T1701 Injcction B4808 Transparent K4912 Transparent K4818 Transparent K8303 Low MFI Copolymer K6606 Low MFI Copolymer F5606 Terpolymer F5006 Terpolymer C5608 Terpolymer C5908 Terpolymer T36F  Film grade PPR4220 Pipe grade PPR4400 Pipe grade B8101 Pipe grade B1101 Pipe grade T1001J Pipe grade K9026 High MFI Copolymer K6100 High MFI Copolymer K7100 High MFI Copolymer K7726H High MFI Copolymer K7760H High MFI Copolymer PPH-Y14 Fiber PPH-Y24 Fiber PPH-Y26 Fiber PPH-Y40 Fiber PPH-Y37 Fiber
USD 800.0/Ton 800.0
PVC SG5 Technical Data Sheet PVC SG5 Material PVC Features Standard Resin Powder Physical Properties Test Method Unit Value Bulk Density INTERNAL METHOD g/ml 0.52 Relative Viscosity VN INTERNAL METHOD   113 Volatile Content INTERNAL METHOD % 0.08 Particle Size >250μm INTERNAL METHOD % 0.8 Particle Size <3μm INTERNAL METHOD % 98.8 Residual Monomer INTERNAL METHOD μg/g ≤1.0 Optical performance Test Method Unit Value Whiteness 160℃ After 10min INTERNAL METHOD % 81
USD 1100.0/Ton 1100.0
Brand Melt Index(g/10min) Usage 3224 2 Films, Blowing molding, Antiblock, Food contact grade, Ethylene-butene copolymer 3470 23 Food contact grade 3840 5 Roll forming , Food contact grade 4105 4.5 Extrusion, Blowing molding, Films, Sheets, Pipe, Food contact grade 5815     7042 2 Blow molding, Cast molding, Compounding, Lamination film, Liners bags, Packaging film, Plastic wrap, Sanitary application, Agricultual film, Stretch wrap, 7047 1 Extrusion, Blowing molding, Films, Unantiblock, Food contact grade 7050 2 Lining film, Packaging film, Agricultural film 7144 20 Injection molding ,Food contact grade 7635 20 Injection molding, Stress crack resistance, Housewares application, Toys 8315 30 Metallocene, Cast molding, Cast film , Silage films, Stretch wrap 8320 20 Injection molding, Food contact grade 1018MF 1 Blow molding, High impact, Puncture resistant, Bag in box , Barrier food packaging, Bread bags, Compounding film, Food packaging application, Freeze film, Heavy-duty bags , Industrial packaging applciation, Liner bags, Overwrap film, Seal packaging, Stand up pouches, Trash bag, Agricultural film 1648BK     2018MB 2 Blow molding, High impact, High tensile strength, Puncture resistant, Bag in box , Barrier food packaging, Bread bags, Compounding film, Food packaging application, Freeze film, Heavy-duty bags , Liner bags, Overwrap film, Seal packaging, Stand up pouches, Trash bag, Agricultural film 2045G 1 Extrusion, Blow molding, Film grade , Unantiblock , Food contact grade 218W 2 Blowing film 218WJ 2 Blowing film 3518CB 3.5 Metallocene, Extrusion, Blow molding, Cast molding, Films, Wire and cable, Diaper backsheet 5100G 0.85 Metallocene, Blowing film, 5220G 3.5 Metallocene, Blowing film, Stretch wrap, Diaper bottom wrap 5400G 1 Metallocene, Blowing film, High toughness, heat sealing 6101XR 20 Injection molding, Stress crack resistance, High stiffness, High heat resistance, Pails , Lids, Closures, Containers, Composites 6101XR Wire & Cable 20 Compression molding, Compounding, Low voltage insulation, Masterbatch carrier, Wire&Cable 6201RQ 50 Powder, Coating Compounding, High gloss,  Stress crack resistance, High stiffness, Heat aging resistance, Pails , Lids, Closures, Containers, Composites, Thin wall products 6201RQ Wire & Cable 50 Compression molding, Compounding, Low voltage insulation, Masterbatch carrier, Wire&Cable 7151U 5.1 Roll forming , Rotational grade 7540 0.76 Extrusion, Low temperature resistance, wire and cable, insulation materials 8600L 2 Foaming.  wire and cable, insulation materials AT6101 1 Metallocene, Blowing film, High toughness, heat sealing DNDB7149U 4.2 Roll forming , Rotational grade E1018MA 1 Metallocene, Blowing film, High toughness, heat sealing FB2230 0.25 Blowing film, Unique matte surface, high yield, bubble stability, toughness and high melt strength, suitable for food packaging, express bag, Eisai film, FFS film, HDSS bag FB2310 0.2 Blowing film, Unique matte surface, high yield, bubble stability, toughness and high melt strength, suitable for food packaging, express bag, Eisai film, FFS film, HDSS bag FD21HS 2 Blowing film, Antiblocking , General purpose, Cast film Fu149M 1.2 Blowing film, Antiblocking , Food contact grade, LL0220KJ 2 Blowing film, Antiblocking , Food contact grade, LL1002KW 2 Blowing film, Antiblocking , Food contact grade, M200024 20 Injection molding, Houseware, bottle caps, large components and industrial containers, dustbins and auto parts, excellent low temperature toughness and environmental stress cracking resistance, high gloss. M2720 20 Injection molding, High toughness, high strength, high flow, used for the production of plastic barrels, plastic boxes and large injection molding and other daily necessities. M3804 4 Roll forming, High impact resistance, high rigidity, food contact grade, water tank, plastic cans, outdoor products, industrial containers, food containers, etc M500026 50 Injection molding, Container, bottle cap and deep cavity injection parts, excellent gloss, high fluidity, fast circulation injection performance. M735RU 6 Roll forming, Powder, Food contact grade,Anti-uv, High gloss, high melt strength, high toughness, high rigidity, oxidation resistance. Used for making auto parts, lampshades, industrial parts, decorative accessories, etc ML2202 0.25 Blowing molding ,   Shock absorbing gaskets, bags, film, agricultural application packaging, etc Q1018N 1 Extrusion, Blowing molding, Films, Unantiblock, Food contact grade SP0540 3.8 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film SP1520 2 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film SP4020 1.8 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film TJZS-2650 50 Injection moldng, Thin wall products XP9000 0.55 Metallocene, Pipe grade, Drinking water contact grade, Good weather resistance, Cold/Hot water pipe XP9200 1.5 Metallocene, Blowing film, Low temperature heat sealing, high impact, low specific gravity, laminate film, flow film, stretch film YLF1801 0.96 Blowing film, high gloss, heavy-duty film YLF1802 1.5-2.5 Blowing film, Low temperature resistance, aging resistance, color printing film 222WT 1.9 Blow molding, Coating, Film grade , Food contact grade UR644 5 Roll forming, Wear resistant grade
USD 1180.0/Ton 1180.0
GPPS 525 Technical Data Sheet Material Attribute Food Contact Grade Features  High light transmission, General purpose grade Application Appliances, Lampshade, Packaging, Housewares application, Disposable tableware  Physical Property  Standard Value Unit Melt Index  GB/T 3682 8.0 g/10min Monomer Content INTERNAL METHOD ≤800 % Mechanical Property  Standard Value Unit Tensile Stength Yield GB/T 1040 43 MPa Flexural Strength GB/T 9341 76 MPa Therml Property  Standard Value Unit Vicat Softening Temperature GB/T 1633 95 ℃ Optical Property  Standard Value Unit Transmittance GB/T 2410 90 %  
USD 1160.0 - 1400.0/Ton
  LDPE 2426H Technical Parameters Process Blowing molding Foam molding Additives Antiblock Slip Agent Features . Greater resistance to blocking . Low specific gravity . Low friction index . Good processability . Good sealing  Application . Bags . Food packaging application . Freeze film . lamination film . Packaging film . Santiary application . Blown film . Film . Foamed parts . Food film . Sealing layer . Shrink wrap Physical Properties Test Conditions Value Unit Test Method Density 23℃ 0.924 g/cm³ ISO 1183 Melt Index  190℃ 2.16kg 2 g/10min ISO 1133 Mechanical Properties  Test Conditions Value Unit Test Method Tensile Modulus   270 MPa ISO 527 Tensile Strength Yield   10 MPa ISO 527 Tensile Strength Flow  50μm Blown Film 24 MPa ISO 527 Tensile Strength xFlow  50μm Blown Film 22 MPa ISO 527 Elongation Flow  50μm Blown Film 600 % ISO 527 Elongation xFlow  50μm Blown Film 800 % ISO 527 Falling Weight Impact Strength  50μm Blown Film 125 g ISO 7765 Fricition Coefficient  50μm Blown Film 0.12   ISO 8295 Thermal Performance Test Conditions Value Unit Test Method Vicat  50℃/hr 10N 94 ℃ ISO 306 Melting Temperature   112 ℃ ISO 11357 Optical performance Test Conditions Value Unit Test Method Gloss   60° 50μm Blown Film 120   ASTM D2457 Haze  40μm Blown Film 7.0  % ASTM D1003 Hardness Test Conditions Value Unit Test Method Shore Hardness D   48   ISO 868
USD 1750.0/Ton 1750.0
EVA18J3   Part Marking Code EVA Material Shape Pellets Process Extrusion molding polymer copolymer Application Shoes material PROPERTIES TEST METHOD UNIT Data VA Content   % 18 Density ASTM D1505 g/cm3 0.939 Melt Index MI2.16 ASTM D1238 g/10min 2.56 Tensile Strength at break 50mm/min Compression Molded ASTM D638 MPa 16 Elongation at break 50mm/min Compression Molded ASTM D638 % >750 Melting point ASTM D-3418 ℃ 86 Hardness ASTM D2240 Shore D 33 Noted: The above values are measured by experiment and are for reference only.
USD 1150.0/Ton 1150.0
High density polyethylene (hdpe) Grade PE100 pipe grade Color Black Process Extrusion molding Application area Construction  pipes Features It has high quality physical and mechanical strength, good dispersion of carbon black, excellent weather resistance, long-term stability and excellent resistance to fast cracking propagation and slow cracking    growth Description PE100 grade, black mix, used to produce tubing in a variety of fields: water pipe, gas pipe, sewage pipe, replacement liner, sea water drain pipe and industrial pipe..   Properties Value Test Method Unit Melt flow rate 0.28 ISO 1133 g/10min ,190°C,5kg Density(mix) 0.959 ISO 1183/ISO 1872-2B 23°C, g/cm3 Density(basic resin) 0.949 ISO 1183/ISO 1872-2B 23°C, g/cm3 Carbon black content 2.3 ASTM D-603 % Tensile strength yield 23 ISO/DIS6259 MPa Elongation break 600 ISO/DIS6259 23°C, 50mm/min
XO "EZIZ ERKIN"
Turkmenistan
Specify the price USD
Price on request. Payment terms: T/T. The product is certified. Quality: high. The offered products fully comply with high international standards. Big run width: up to 90 cm. Big run height: 110cm, 125cm, 135cm, 145cm or at the request of the customer. Density: from 180 g/m2 to 200 g/m2. Product color: on request. Load capacity: up to 5 tons.
USD 1.0/Ton 1.0
Calcium/zinc based stabilizer suitable for the production of rigid PVC pipes. This stabilizer has a sufficient range of effective lubricants, which makes it unnecessary to use additional lubricants in the formulation. This stabilizer has been developed for twin screw extruders and large high pressure pipes. It is the best choice for hygiene products. Form Powder Color White Ash (%) 26±1 Solubility in water Insoluble Application Pressure pipes (6-16 bar) Water supply pipes Potable water pipes Recommended flow rates Depending on formulation, process conditions and product type; 2.5-3.5 parts Standard packaging 25 kg net, in a composite bag
USD 1.0/Ton 1.0
It is a lead-based stabilizer specifically designed for sheathing and cable insulation. Due to its high lead content, it has excellent mechanical and electrical properties. This grade has higher lubricity Chemical-Physical Specification Form Powder Color White Ash (%) 59±1 Solubility in water Insoluble Application PVC sheath and insulation of electric cable Recommended costs Depending on formulation, process conditions and type of product; 2.5-3.5 parts Standard packaging 25 kg net, in a composite bag
USD 536.3/Ton 536.3
Multi-purpose and economical pigment, mainly used for whitening plastics such as PVC, polystyrene, ABS. Using 0.15 (parts) of this product can reduce the use of titanium dioxide by up to 50% in applications where light fastness is not required. Due to the lower titanium content, the product is less brittle. This grade improves whiteness without the use of other pigments, so it is too economical Chemical-Physical Specification Form Powder Color Blue Moisture (%) Max0.1 Application Various kinds of white PVC products such as pipes, profiles and sheets. Recommended costs Depending on the recipe, process conditions and product type; 0.05-0.25 parts Standard packaging 25 kg net, in a composite bag
USD 275.0/Ton 275.0
Blue pigment based on copper. It has excellent dispersion in PVC mixture. Chemical-Physical Specification Solfur Max. 0.3 Moisture (%) Max 1 Water Max 1.5 325 mesh sieve (%) Max. 0.5 Application Plastics, Paints, Printing Inks, Rubber, Stationery, etc. Recommended costs Depending on process conditions and product type. Standard packing 25 kg net, paper bag.
USD 856.4 - 1484.43/pcs
Screw dispenser of polymer additives for extrusion and molding of plastics
Specify the price USD 0 0
BENTONITE (TehnoCLAI, TehnoCLAI HV), REAGENTS FOR REGULATION OF MUD PROPERTIES (TehnoGEL, TehnoPAC PR, TehnoFLOK) and AUXILIARY ADDITIVES TO IMPROVE DRILLING MUD PROPERTIES (TehnoSOAP, TehnoFREE, TehnoGREASE P). Products from Russian and foreign manufacturers with delivery to any city in the country.
EZIZ ERKIN
Turkmenistan
Specify the price USD 0 0
Price (FCA): on request Sleeve width: from 85 to 120 cm. Minimum order quantity: 20 tons. Payment terms: US dollar, euro. Product color: on request. The product is certified. The offered products are fully consistent with high international quality. Export - wholesale import of quality goods from Turkmenistan around the world. Delivery by all modes of transport (INCOTERMS 2010 EXW, FCA, FOB, CIP, CIF.). Customs clearance of goods free of charge: 100%.
USD 13.78/pcs 13.78
Thickness AS PER CUSTOMER Color AS PER CUSTOMER Size AS PER CUSTOMER Brand RABBIT Packaging Type Roll I Deal In New Only Country of Origin Made in India Material AS PER CUSTOMER
USD 6.26/pcs 6.26
Polyurethane Bucket Liner     Brand Rabbit Color Multicolor Finish Color Coated Country of Origin Made in India Property abrasion resistance Closure Type open
USD 30.04/pcs 30.04
Polyurethane Liners for Hopper and chutes Brand Rabbit Color Multicolor Finish Semi Gloss Country of Origin Made in India Operating Voltage 220V Weight Capacity 400-500 kg

The official Qoovee website helps you make profitable deals, find a supplier and manufacturer to grow your business. In the “Directory of suppliers” section you can find for yourself everything you need: Polymeric materials from Russia, Kyrgyzstan, Kazakhstan, Turkey, Ukraine and other countries. Product categories are constantly updated. Wholesale suppliers are looking for wholesale purchases and partnerships and are ready for mutually beneficial cooperation.

Write to us, we are online!