Metallurgy in bulk on Qoovee

CHH Cross hydraulic slide table is designed with hydraulic cylinder and fluid valve controller for feeding control. Feature: 1. High tensile cast iron normalized and stress relieved 2.Automated driven by hydraulic power pack 3.Optional telescopic covers 4.Parallelism : within 0.01mm/100mm

VSS Vertical slide unit is designed with hardness guideway and standard ball screw class C7 which are incorporated with a servo motor for spindle feeding. Feature: 1.Turcite is included to reduce friction 2.Capable to mount with your prefer brand servo motor 3.Ball screw class C5 or C3 is available upon request 4.Servo motor stand / coupling / telescopic included 5.DELTA servo motor is available 6.Optional telescopic covers 7.Perpendicularity : within 0.01mm/100mm

RH150 slide unit is designed with linear rails and precision class ball screw which are incorporated a servo motor. RH150 linear guide slide is guided by rolling element blocks, either ball or cylindrical rollers. These rollers allow the slide to operate with zero friction, move rapidly and creating less heat. The advantages of linear motion slide are smooth, fast and extremely accurate positioning performance due to low friction. Feature: 1. Capable to mount with your prefer brand servo motor 2.Ball screw class C5 or C3 is available upon request 3. Ball or cylindrical rollers is available for linear blocks 4. Servo motor stand / coupling / telescopic included 5. DELTA servo motor is available 6.Parallelism : within 0.01mm/100mm

BS150 hardened way is a linear motion slide that incorporates precision and ground rectangular way guides. This generates more friction and decreases speed, but tremendously increases durability. It is used when accuracy, dampening and rigidity are required while machining. The surface of rectangular way guides and shim are grinded and scrapped, the contact surface of saddle are glued with turcite which reduces the friction. Shim is required to be adjusted and aligned when backlash is generated for the contact surface. Feature: 1. Turcite is included to reduce friction 2. Shim is included to precisely align, level, and adjust spacing for sliding parallelism. 3. Capable to mount with your prefer brand servo motor 4. Ball screw class C5 or C3 is available upon request 5. Servo motor stand / coupling / telescopic included 6.DELTA servo motor is available 7.Parallelism : within 0.01mm/100mm

S60-FA408 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This unit is capable for processing like inner (ID) and outer (OD) turning, grooving, conical boring, conical threading, concave/convex rounding and other spherical machining. Feature: 1.Facing slide stroke 8mm 2.Facing slider repeatability within 0.005mm 3.Standard 3-phase AC motor 2.2kW is included, optional maximum power up to 3.7kW 4.Belt driven at fixed speed and incorporate a timing belt 5. Available for servo driven at variable speeds 6. AC Induction Motor protection IP 54

S25 spindle housing itself is an FC30 casting, which further underwent precision boring and honing, and the material for spindle are alloy steels subjected to high frequency heat treatment. They are assembled with SKF Germany, NSK Japan and Taiwan TPI precision bearings which maintaining the spindle nose accuracy 0.002mm or less. Its maximum capacity RPM 12000 is suitable to mount on a CNC servo slide or hydraulic feed table for your machining applications. Feature: 1.Standard 3-phase AC motor 0.18kW is included, optional maximum power up to 0.37kW 2.Belt driven at fixed speed and incorporate a timing or Poly-V belt 3.Spindle taper ER20 is available 4.Available for servo driven at variable speeds 5.AC Induction Motor protection IP 54 6.Gearbox motor is available upon request

ST1N tapping spindle unit is designed with lead screw transmission and supported automatic thread cutting and float tap chuck. The maximum tapping capacity is M12 (S45C). Feature: 1.Standard 3-phase AC motor 0.75kW is included, optional maximum power up to 1.5kW 2.Belt driven at fixed speed and incorporate a timing or V belt 3.Spindle taper ER20, JT6, MT2 and AS22 are available 4.Available for servo driven at variable speeds 5.OMRON proximity switch sensors and stand are furnished 6.AC Induction Motor protection IP 54 7. Gearbox motor is available upon request

Polypropylene plumbing fittings.

Kindly message me for more details,

The Center for Confirmation of Conformity "Basis-Expert" provides services for confirming the conformity of products, will help to certify imported and domestic products in accordance with the requirements of the Technical Regulations of the Customs Union, which is necessary for import and sale in the territory of the Eurasian Economic Union and will help to pass all laboratory tests in accredited laboratories of the EAEU.

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Ricoh G5S (MH5220) UV Printhead - J35000Manufacture: Ricoh

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Toshiba CE4W1 PrintheadUnique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot.Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface.Printer Compatibility: TOSHIBA PrinterRemarks: Original

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   KONICA 1024i MHE-D PrintheadTo be used with: Flora PP3200 UVRemarks: OriginalIt is compatible with water based ink and uv ink

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Roland BN-20 / XR-640 / SOLJET PRO4 XF-640 printhead (DX7) -6701409010To be used with: Roland BN-20 / FH-740 / RA-640 / RE-640 / RF-640 / VS-300 / VS-300i / VS-420 / VS-540 / VS-540i / VS-640 / VS-640i/ XF-640 / XR-640Remarks: OriginalPart no.: 6701409010

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   This GS-508 (12 picoliters) print head is suitable for Vutek GS printers. This is the original Vutek print head. This product carries a manufacturer warranty. Manufacturer: VutekPrinter compatibility: Vutek GS2000 / GS3200 / GS5000DP part number : PPHSE5082

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Mimaki TS500-1800 Gen5 printhead Assy Type-D - M014140This printhead is suitable for Mimaki TS500-1800 & TX500-1800 series printers.Printer Compatibility:  Mimaki TS500-1800 / TX500-1800B / TX500-1800DSPart No.: M014140Remarks: Original Specifications: Model PRH-MIM-006 Head materials  SST, Nickel alloy, Epoxy Adhesive Number of nozzles  Four 320 nozzles Nozzle spacing  0.1693 mm Nozzle density  up to 600 npi Nozzle plate surface  Coated SST Piezo type  D33 Stacked PZT Native drop volume  7 pl Drop volume range  7 - 35 pl Drop velocity  7 m/s Jetting frequency  Up to 60 kHZ Temperature control  Integrated Heater and Thermistor Operator temperature range  Up to 80° C Life  100 billion actuations per nozzle Dimensions  89 x 25 x 69 mm (not include cables)

Product SpercificationCaluanie Muelear Oxidize ( Crude Caluanie 99% is generated from Muelear oxidize), Caluanie (Oxidative Partarization Thermostat, Heavy Water)This product is used for crushing and processing precious metals and semi precious stones. It is used for processing precious and semiprecious stones, crushing metals in the chemical industry.We do worldwide  deliveries and supply our product to various regions around the globeCambodia,Vietnam,Thailand ,Uzbekistan,Krygystan, China , Laos, UAE, Paraguay, Oman, Latvia, kazakhstan, India, Europe,RussiaAvailable Packaging: 1L,2L,5L & bulk packaging as from 20L, 50L, 100L or as per buyer’s request.

Designed for use both in warehouses and industries, and in small spaces - garages, retail outlets, storerooms. The rack consists of vertical racks (frame) and horizontal beams fixed to them with stacked shelves (tier). Rack with 5 shelves (tiers) included. External size, taking into account racks and beams (HxWxD) —2500x3765x850mm Load on a tier - up to 450 kg, Load on a rack of 2 sections - up to 4500 kg. Robust and stable construction. Stand (frame) - galvanized steel, profile 55x47 mm. The beam is attached to the rack on hooks, with additional fixation against accidental lifting. The pitch of the holes for fixing the beams is 50 mm. Stacked shelves - galvanized steel (600x300 mm). The rack is delivered unassembled. Anchors are not included. Manufacturer: Russia. Warranty: 12 months.

4N5614 Caterpillar ROCKER ARM

IN120D - Burgmann BT-RN3 NU (DIN24960)  analogue of Burgmann BT-RN3 NU (DIN24960) IN120D - Burgmann BT-RN3 NU (DIN24960)  analogue Burgmann BT-RN3 NU (DIN24960)

mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16 mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16 mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16

mechanical seal type IN301 analogue of burgmann BT-AR, john crane pr / dr, vulcan 18, sterling bt, flowserve pac-seal 118, aesseal b01, roten 37b / l5, latty t750

mechanical seal type IN109 analogue Burgmann type MG1 MG12 MG13, Roten L3, L3K, L3N, Vuckan 19, 192, 193 Anga A1, Aesseal B02, B012, BP02, Flowserve Pac-Seal 190, 192, 193

mechanical seal type IN1155, type IN1155C, analogue of burgmann BT-FN, Burgmann BT-FNU Flowserve Pac-Seal 43 / 43D, Vulcan Type 13 / 13.DIN, AESSEAL T04 / T04D, ROTEN 3 TYPE, LATTY T901 / T901D , Sterling SR3 / SU3

spare parts for pump Mini Gnome 7-7 spare parts for pump Mini Gnome 7-7 spare parts for pump Gnome 10-6 spare parts for the pump Gnome 10-6D spare parts for pump 1 Gnom 10-6D spare parts for pump Gnome 6-10 spare parts for the pump Gnome 6-10D spare parts for pump 1 Gnome 6-10D spare parts for the pump Gnome 10-10D spare parts for pump 1 Gnom 10-10D spare parts for pump GNOM 10-10 spare parts for pump GNOM 16-16 spare parts for pump GNOM 25-20 spare parts for pump GNOM 40-25 spare parts for pump GNOM 50-25 spare parts for pump GNOM 53-10 spare parts for pump GNOM 100-25 spare parts for pump GNOM 140-10

Available and on order, wholesale! Direct deliveries from Southeast Asia. Rocker switches are switching devices intended for use in industrial and consumer electronic equipment. The live parts of such switches are made of copper alloy, and the contacts are made of silver alloy. Key switch designs include LED, incandescent or neon backlighting.

Housing for electronic equipment is used in electronics to create various devices. They can be manufactured in a sealed or non-sealed design. Our assortment includes a large selection of brand enclosures We work from stock and on order. WHOLESALE Direct deliveries from Southeast Asia.

A&S; Hydraulic Co., Ltd. supplies Hagglunds CB Series Hydraulic Motors. Hagglunds Hydraulic Motor CB Series models we offer: CB08400840CA0N0C0000 CB08400840CA0N000000 CB08400840CA0N0C0000/SPD CB08400840CA0N000000/SPD CB08400840CA0N000000/COC CB08400800CA0N000000 CB08400800CA0N000000/SPD CB08400800CA0N0C0000 CB08400800CA0N0C0000/SPD CB08400800CA0VH00000 CB08400800CA0VHC0000 CB08400800CA0NH00000 CB08400800CA0NHC0000 CB08400800CA0V000000 CB08400800CA0V0C0000 CB08400840CA0VHC0000 CB08400840CA0N0C0000/SMC CB08400840CA0V000000 CB08400840CA0V0C0000 CB08400840CA0NH00000 CB08400840CA0NHC0000 CB08400840CA0VH00000 CB11200880CA0NHC0004 CB11200880CA0N0C0004 CB11200880CA0NH00004 CB11200880CA0VHC0004 CB11200880CA0N000004 CB11200880CA0V0C0004 CB11200880CA0VH00004 CB11200920CA0V0C0004 CB11200920CA0VH00004 CB11200920CA0V000004 CB11200920CA0N0C0004 CB11200920CA0NH00004 CB11200920CA0VHC0004 CB11200920CA0N000004 CB11200880CA0V000004 CB11200960CA0VHC0004 CB11200960CA0V000004 CB11200960CA0V0C0004 CB11200960CA0NHC0004 CB11200960CA0N000004 CB11200960CA0N0C0004 CB11200960CA0VH00004 CB11200920CA0NHC0004 CB11201000CA0V0C0004 CB11201000CA0NH00004 CB11201000CA0NHC0004 CB11201000CA0N000004 CB11201000CA0VH00004 CB11201000CA0VHC0004 CB11201000CA0V000004 CB11200960CA0NH00004 CB11201040CA0N000004 CB11201040CA0N0C0004 CB11201040CA0V000004 CB11201040CA0NH00004 CB11201040CA0NHC0004 CB11201000CA0N0C0004 CB11201040CA0VHC0004 CB11201040CA0V0C0004 CB11201080CA0NH00004 CB11201040CA0VH00004 CB11201080CA0N000004 CB11201080CA0NHC0004 CB11201080CA0N0C0004 CB11201080CA0VHC0004 CB11201080CA0VH00004 CB11201080CA0V0C0004 CB11201080CA0V000004 CB11201120CA0NHC0004 CB11201120CA0NH00004 CB11201120CA0N0C0004 CB11201120CA0N000004 CB11201120CA0VHC0004 CB11201120CA0V0C0004 CB11201120CA0VH00004 CB11201120CA0V000004 CB04000240CA0N000000 CB04000240CA0N000000/SMC CB04000240CA0N000000/ATE CB04000240CA0NH00000 CB04000240CA0N0C0000 CB04000280CA0N000000 CB04000240CA0V000000 CB04000240CA0NHC0000 CB02800280CA0N000000/SMC CB02800280CA0N000000/SPD CB02800280CA0N000000 CB02800280CA0N000000/CO CB02800280CA0N000000/COC CB02800280CA0N0C0033 CB02800280CA0NH00000 CB02800280CA0N0C0000/COC CB02800280CA0N0C0000 CB02800280CA0N0C0000/SPD CB02800280CA0N0C0000/SMC CB02800280CA0N000033 CB02800280CA0N000000/VQ CB02800280CA0V0C0000 CB02800280CA0VH00000 CB02800280CA0VHC0000 CB02800280CA0NHC0000 CB02800280CA0V000000 CB04000400CA0VH00000 CB04000360CA0V0C0000 CB04000360CA0V000000 CB04000360CA0NHC0000 CB04000400CA0NH00000 CB04000400CA0NHC0000 CB04000400CA0V000000 CB04000400CA0V0C0000 CB04000400CA0N0C0000 CB04000400CA0N000000/VEC CB04000400CA0N0C0000/SPD CB04000400CA0N0C0000/COC CB04000400CA0N000000/COC CB04000400CA0N000000/CO CB04000400CA0N000000/SPD CB04000400CA0N000000/SH CB04000400CA0N000000 CB04000240CA0V0C0000 CB04000240CA0V000000/SMC CB04000240CA0VHC0000 CB04000240CA0VH00000 CB04000280CA0NH00000 CB04000280CA0NHC0000 CB04000280CA0V0C0000 CB04000280CA0V000000 CB04000320CA0VHC0000 CB04000280CA0N0C0000 CB04000280CA0N000000/SPD CB04000280CA0VHC0000 CB04000280CA0VH00000 CB04000320CA0N000000 CB04000320CA0N000000/SPD CB04000320CA0V0C0000 CB04000320CA0VH00000 CB04000360CA0N000000/COC CB04000360CA0N000000/SPD CB04000320CA0NH00000 CB04000320CA0N0C0000 CB04000320CA0V000000 CB04000320CA0NHC0000 CB04000360CA0N000000 CB04000360CA0N0C0000 CB04000360CA0N0C0000/COC CB04000360CA0VH00000 CB04000360CA0VHC0000 CB08400680CA0VHC0000 CB08400720CA0NH00000 CB08400720CA0N000000/SPD CB08400720CA0V000000 CB08400720CA0N0C0000 CB08400720CA0N000000 CB08400720CA0N000033 CB08400720CA0VHC0000 CB08400600CA0VHC0000 CB08400600CA0V0C0000 CB08400720CA0NHC0000 CB08400720CA0VH00000 CB08400720CA0V0C0000 CB08400600CA0NH00000 CB08400640CA0N000000 CB08400600CA0VH00000 CB08400600CA0NHC0000 CB08400600CA0V000000 CB08400600CA0N0C0000/SPD CB08400760CA0V0C0000 CB08400760CA0V000000 CB08400760CA0VHC0000 CB08400760CA0VH00000 CB08400760CA0N0C0000 CB08400760CA0N000000 CB08400760CA0NHC0000 CB08400760CA0NH00000 CB08400680CA0N000000 CB08400680CA0V0C0000 CB08400680CA0VH00000 CB08400680CA0NHC0000 CB08400680CA0V000000 CB08400680CA0N0C0000 CB08400680CA0NH00000 CB08400680CA0N000000/FLS CB08400680CA0N000000/SPD CB08400600CA0N0C0000 CB08400600CA0N000000 CB05600520CA0VHC0000 CB05600520CA0VH00000 CB05600520CA0V0C0000 CB05600520CA0V000000 CB05600520CA0N000000/SMC CB05600520CA0N000000 CB08400640CA0V0C0000 CB08400640CA0VH00000 CB08400640CA0VHC0000 CB08400640CA0N0C0000 CB08400640CA0NH00000 CB08400640CA0NHC0000 CB08400640CA0V000000 CB08400640CA0N000000/SPD CB05600560CA0VH00000 CB05600560CA0VHC0000 CB05600560CA0V0C0000 CB05600560CA0NH00000 CB05600560CA0NHC0000 CB05600560CA0N0C0000/SPD CB05600560CA0V000000 CB05600440CA0NH00000 CB05600440CA0NHC0000 CB05600440CA0V000000 CB04000520CA0N000000 CB04000520CA0N0C0000 CB04000520CA0V000000 CB04000520CA0V0C0000 CB04000520CA0NH00000 CB04000520CA0NHC0000 CB04000520CA0VH00000 CB04000520CA0VHC0000 CB05600440CA0VH00000 CB05600440CA0V0C0000 CB05600440CA0VHC0000 CB05600560CA0N000000/SMC CB05600560CA0N0C0000 CB05600560CA0N000000/SH CB05600560CA0N000000/COC CB05600560CA0N000000/SPD CB05600560CA0N000000/GAU CB05600560CA0N000000/CO CB05600520CA0N000000/SPD CB05600560CA0N000000/FLS CB05600520CA0NH00000 CB05600520CA0N0C0000 CB05600520CA0NHC0000 CB05600440CA0N0C0000 CB05600440CA0N0C0000/SMC CB05600440CA0N000000/SMC CB05600440CA0N000000/SPD CB05600440CA0N000000 CB05600440CA0N000000/SH CB05600560CA0N000000 CB04000480CA0N0C0000 CB04000480CA0NH00000 CB04000480CA0NHC0000 CB04000480CA0V000000 CB04000440CA0N000000 CB04000480CA0V0C0000 CB04000480CA0VH00000 CB04000480CA0VHC0000 CB04000480CA0N000000 CB04000400CA0VHC0000 CB04000560CA0NHC0000 CB04000560CA0N000000 CB04000560CA0V0C0000 CB04000560CA0NH00000 CB04000560CA0N0C0000 CB04000560CA0VHC0000 CB04000560CA0V000000 CB04000560CA0VH00000 CB04000440CA0V0C0000 CB04000440CA0NH00000 CB04000440CA0NHC0000 CB04000440CA0N0C0000 CB04000440CA0V000000 CB04000440CA0VH00000 CB04000440CA0VHC0000

A&S Hydraulic Co., Ltd. supplies Hagglunds CA Series Hydraulic Motors. Hagglunds Hydraulic Motor CA Series models: REMANCA100100CA0N0C0200 REMANCA100100SA0N0C0200 RADIALPISTONMOTCA100100 RADIALPISTONMOTCA210210 REMANCA210210CA0N0C0200 REMANCA210210SAON0C0200 REMANCA140140CA0N0C0200 REMANCA140140SA0N0C0200 REMANCA5050CA0N0C0200 REMANCA7070CA0N0C0200 REMANCA5020CA0N000200 REMANCA5020CA0N000200R REMANCA7070SA0N0C0200 CA7070CBRNHC0200 CA7070CB0VH00200/BICA13 CA7070CB0VH00200 CA7070CB0VH00200/MDA73 CA7070CB0VH00200/BICA24 CA7070CB0VH00264 CA7070CB0VH00213 CA7070CB0VHC0200 CA7070CB0VH00264/MDA73 CA7070SALNHC0206 CA7070SALV000200 CA7070SALNH00213 CA7070SALNHC0200 CA7070SALNH00200 CA7070SALN0C0233 CA7070SALNH00200/VTCA60 CA7070SALN0C0200/VTCA60 CA7070SALN0C0251/VTCA60 CA7070SALN000219 CA7070SALN0C0206 CA7070SALN000200/VTCA60 CA7070SALN0C0200 CA7070SA0VHC0200 CA7070SALN000213 CA7070SA0VH00213 CA7070SA0V0C0233 CA7070SA0VH00200 CA7070SA0V0C0200 CA7070SA0V0C0200/SPDCCA CA7070SA0V000233 CA7070SA0V000228 CA7070SA0V000245 CA7070SA0V000233/SPDB2-1 CA7070SA0NHC0200 CA7070SA0NH00233 CA7070SA0V000213 CA7070SA0V000200 CA7070SA0N0C0264 CA7070SARV000213 CA7070SA0NH00213 CA7070SA0NH00200 CA7070SARNHC0206 CA7070SARV000200 CA7070SARNH00233 CA7070SARNHC0200 CA7070SARNH00200 CA7070SARNH00213 CA7070SARN0C0206 CA7070SARN0C0251/VTCA60 CA7070SARN000228 CA7070SARN0C0200 CA7070SARN000200/VTCA60 CA7070SARN000213 CA7070SALVHC0206 CA7070SARN000200 CA7070SALVH00213 CA7070SALVHC0200 CA7070SALV0C0206 CA7070SALVH00200 CA7070SALV000213 CA7070SALV0C0200 CA7060CB0VH00200 CA7060CBLNH00200 CA7060CB0VHC0200 CA7060CALV0C0200 CA7060CB0NH00213 CA7060CB0NHC0200/BICA13 CA7060CB0NHC0200 CA7060CB0VH00213 CA7060CALVHC0206 CA7060CARN000200 CA7060CARN000213 CA7060CARN0C0200 CA7060CALV0C0206 CA7060CALVH00200 CA7060CALVH00213 CA7060CALVHC0200 CA7060CARV000200 CA7060CARNHC0206 CA7060CA0VHC0200 CA7060CARV000213 CA7060CARNH00200 CA7060CARN0C0206 CA7060CARNHC0200 CA7060CARNH00213 CA7060CALN000213 CA7060CALN000233 CA7060CALNH00213 CA7060CALN000200 CA7060CA0VH00200 CA7060CA0VH00213 CA7060CALN000233/VTCA60 CA7060CA0V0C0200 CA7060CALNHC0200 CA7050SBRNH00213 CA7060CALV000200 CA7060CALNHC0206 CA7060CALN0C0200 CA7060CALV000213 CA7060CALNH00200 CA7060CALN0C0206 CA7060CA0N000200 CA7060CA0N0C0200 CA7060CA0N000213 CA7050SBRNHC0206 CA7050SBRNH00200 CA7060CA0N000200/SMCB1/S CA7050SBRNHC0200 CA7050SBLNHC0206 CA7050SB0NH00245/MDA52 CA7060CA0NHC0200 CA7060CA0NH00213 CA7060CA0V000213 CA7060CA0V000200 CA7060CA0N000233/COCA21 CA7060CA0N000233 CA7060CA0NH00200 CA7050SBLNH00200 CA7050SB0NH00213 CA7050SB0NH00228 CA7050SB0NH00200 CA7050SB0NH00200/MDA73 CA7050SB0NHC0200 CA7050SB0NHC0228 CA7050SB0NH00245 CA7060SALV000200 CA7060SALNHC0206 CA7060SALNHC0200 CA7060SALNH00213 CA7060SALNH00200 CA7060SALN0C0206 CA7060SALN0C0200 CA7060SARVH00213 CA7060SARVHC0200 CA7060SARV0C0206 CA7060SARVH00200 CA7060SARV000213 CA7060SARV0C0200 CA7060SARNHC0206 CA7060SARV000200 CA7060SARNH00213 CA7060SARN0C0206 CA7060SARNHC0200 CA7060SARN000233 CA7060SARNH00200 CA7060SARN000228 CA7060SARN0C0200 CA7060SA0N000233 CA7060SARN000228/VTCA60 CA7060SA0N0C0200 CA7060SA0N000228 CA7060SA0N000200/CA50-21 CA7060SA0N000264 CA7060SA0N000213 CA7060SA0N000200/ATEX CA7060CBRNHC0200 CA7060SA0N000200/COCA30 CA7060CBRNHC0206 CA7060CBLNHC0200 CA7060CBRNH00213 CA7060SA0N000200 CA7060CBLNHC0206 CA7060SALN000200 CA7060CBLNH00213 CA7060CBRNH00200 CA7060SALN000233/VTCA60 CA7060SA0V0C0200 CA7060SALN000213 CA7060SALN000233 CA7060SA0VHC0200 CA7060SA0V000200 CA7060SA0VH00200 CA7060SA0VH00213 CA7060SA0N0C0228 CA7060SA0V000228 CA7060SA0V000213 CA7060SA0V000200/SMCB2/S CA7060CARV0C0206 CA7060SA0NHC0200 CA7060SA0NH00213 CA7060SA0NH00200 CA7060CARVHC0206 CA7060CARVH00200 CA7060CARVH00213 CA7060CARV0C0200 CA7060CB0NH00213/BICA13 CA7060CB0NH00200 CA7060CB0NH00200/BICA24 CA7060CARVHC0200 CA7070CALNHC0200 CA7070CALV000213 CA7070CA0V0C0200 CA7070CALNHC0206 CA7070CALN0C0200 CA7070CALNH00213 CA7070CALV000200 CA7070CALN0C0206 CA7070CA0N000200/SMCB1/S CA7070CA0N000200/VCBCA4 CA7070CALNH00200 CA7070CA0N000200 CA7060SBRNHC0206 CA7060SBRNHC0240 CA7070CA0N000213 CA7060SBRNHC0200 CA7060SB0NHC0228/MDA10 CA7060SB0NHC0240/MDA10 CA7060SB0NHC0240 CA7060SB0NH00200 CA7060SB0NH00233/MDA73 CA7060SB0NHC0228 CA7060SB0NHC0200/MDA51 CA7060SB0NHC0228/MDA73 CA7070CALN000213 CA7070CA0VH00213 CA7070CA0VHC0200 CA7060SB0NHC0200 CA7070CA0VH00200 CA7070CA0V000200 CA7070CA0V000213 CA7070CALN000200 CA7060SB0VH00200 CA7060SBRNH00233/MDA52 CA7060SBRNH00233/MDA10 CA7060SBRNH00233 CA7060SBRNH00213 CA7060SBRNH00200 CA7060SBLNHC0206 CA7060SBLNHC0200 CA7060SBLNH00233/MDA52 CA7060SB0NH00233/MDA10 CA7060SB0NH00233/MDA52 CA7060SB0NH00213 CA7060SB0NH00233 CA7060SB0NH00200/BICA24 CA7060SB0NH00200/MDA73 CA7060SARVHC0206 CA7060SALV0C0200 CA7060SALV000213 CA7060SALVH00200 CA7060SALV0C0206 CA7060SALVHC0200 CA7060SALVH00213 CA7060SARN000200 CA7060SALVHC0206 CA7060SBLNH00233/MDA51 CA7060SARN000213 CA7060SBLNH00213

A&S Hydraulic Co.,Ltd is a global supplier of Rexroth Valves: Rexroth Valve 4WE6,4WE10,4WRE,4WRP10 Rexroth Valve 4WRPEH,4WS2EM,DBEM,3DREP,4WREE Rexroth Valve M-3SEW,DBETE,SED Rexroth Valve Z2FS,Z2S,2FRM Rexroth Valve Z4S,ZDB,ZDR Rexroth Valve DBDS,DBW,DB,2FRM,DR10

A&S Hydraulic Co.,Ltd is a global supplier of Atos Solenoid Valves: Atos Valve DHA,DHI,DHU,DHE Atos Valve DPZO,DHO,DHZO,DHQ,DKE,DKI Atos Valve DKZOR,DHRZO,DLOH,DLHZO Atos Valve DLKZOR,MZA Atos Valve HR, KR, JPR, HQ, KQ Atos Valve JPQ, HG, KG, JPG, HM, KM Atos Valve LIQZO, QVHZO

Canon M50 Mark II Highlights 24.1MP APS-C CMOS Sensor DIGIC 8 Image Processor UHD 4K and HD 720p120 Video Recording Dual Pixel CMOS AF with Eye Detect AF 2.36m-Dot OLED Electronic Viewfinder 3.0" 1.04m-Dot Vari-Angle Touchscreen Wi-Fi and Bluetooth; Webcam Capability Extended ISO 51200, 10 fps Shooting Combination 5-Axis Image Stabilization   Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.

Lens MountB4Sensor ResolutionNot Specified by ManufacturerSensor Type1/2.3" CMOS SensorShutter Speed1/75 to 1/2000 secGain-6 to 18 dBWhite Balance3200 to 6500KRecordingRecording ModesProRes 4444XQ:3840 x 2160p (312.5 Mb/s) 1920 x 1080p (62.5 Mb/s) 1920 x 1080i at 50/59.94/60 fps ProRes 422:3840 x 2160p at 23.98/24/25/29.97/30/50/59.94/60 fps (73.6 Mb/s) 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps (18.4 Mb/s) 1920 x 1080i at 50/59.94/60 fps Audio RecordingRaw: 2-Channel 24-Bit 48 kHzStill Image SupportNot Specified by ManufacturerIP StreamingNoneMedia/Memory Card SlotDual Slot: SD/SDHC/SDXC (UHS-II)Video Connectors1 x BNC (12G-SDI) Output1 x BNC (12G-SDI) InputAudio Connectors1 x 1/8" / 3.5 mm TRRS Headphone/Microphone Input/Output2 x 3-Pin XLR Mic/Line Level (+48 V Phantom Power) InputBuilt-In Microphone TypeStereoOther I/O1 x USB Type-C Input1 x 2.5 mm LANC Control OutputSize4.0"Display TypeArticulating Touchscreen LCDSecondary DisplaySide: LCD Status Display Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine. Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens. Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality. Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation.

COUPLING CONSISTS OF COUPLING AND O-RING, WHICH PROVIDES A LEAK TIGHTNESS AND RELIABILITY OF THE CONNECTION. COUPLING FLANGES ALLOW EASY TO CONNECT RUBBER PIPES TO METAL PIPES. THE BOARD FLANGE IS THE STRUCTURE OF A RUBBERED METAL FLANGE ELEMENT THAT IS ONE WHOLE WITH THE PIPE. THE METAL ROTARY FLANGE IS A PIPELINE INDEPENDENT ELEMENT THAT SERVES EASY FOR INSTALLATION AND DISMANTLING. ADAPTER FLANGE IS USED WHERE IT IS NECESSARY TO CONNECT RUBBER PIPING TO OTHER TYPES OF PIPING OR EQUIPMENT WITH DIFFERENT CONNECTING SIZES. THE MOUNTING FLANGE IS USED FOR INSTALLATION OF PIPELINES AND ALLOWS TO FIX RUBBER PIPES TO SURROUNDING METAL STRUCTURES. & nbsp;

FLOATING PIPELINES ARE RECOMMENDED FOR USE IN TAILINGS OF MINING PLANTS. & nbsp; They are used for transporting abrasive slurry over the water surface from the dredger to the shore. Taking into account the peculiarities of modern technology, pipelines can be equipped with floats for operation as part of both diesel and electric dredgers with the possibility of laying a power cable. & nbsp;

MULTI-LENS COMPENSATOR HAS LARGER COMPLETION AND EXTENSION AMPLITUDE COMPARED TO LENSE COMPENSATOR, WHICH ALLOWS THE USE OF LESS PRODUCTS DATA ON LONG LONG PIPES. It is a flexible insert made of cord fabric. The inner part is made of rubber based on natural or synthetic rubber. The compensator ensures trouble-free operation in case of sudden temperature fluctuations. & nbsp;

DESIGNED TO COMPENSATE TEMPERATURE EXPANSIONS AND COMPRESSIONS, AND ALSO TO REMOVE PIPELINE MISLAIMS. & nbsp; The lens expansion joint is made of rubber based on natural or synthetic rubber to increase wear resistance, and the strength of the product is achieved through the use of cord fabric. & nbsp; The expansion joint is equipped with swivel flanges and, if the client wishes, with limiting pins. & nbsp;

Seamless hot-rolled pipes are manufactured by helical rolling, which, in comparison with many other production methods, makes it possible to obtain a pipe with a dense fine-grained structure, thereby ensuring higher mechanical properties and fatigue characteristics of products. Manufactures: - seamless pipes of general and special purpose made of carbon, alloyed and high-alloyed steels; - seamless pipes made of corrosion-resistant steels for general purposes; -pipes-billets for machining; - seamless pipes made of titanium-based alloys; - seamless pipes made of tool steel; HOT ROLLED STAINLESS STEEL TUBE: The material from which the pipe is made: chromium steels of the martensitic class: 20X13, 30X13 chromium-nickel steels of the austenitic class: 12Х18Н10Т, 12Х18Н9Т, 08Х18Н10Т ferritic chromium steels: 08X13, 12X17 The production sites of JSC Vyatka are equipped with the necessary equipment to obtain the required properties of the pipe billet: hot rolling heat treatment mechanical restoration The scope of application of stainless steel pipes is very extensive, since this material, in addition to its high strength, is characterized by low sensitivity to the repetitive effects of various corrosive environments and high temperatures. These steels have proven themselves well in the pharmaceutical, food, petrochemical and energy industries, and recently, due to the tightening requirements for the reliability and durability of structures, they are increasingly found in mechanical engineering and construction. METAL STRUCTURES BASED ON QUICK INSTALLATION ELEMENTS Pedestrian railings Lawn fences Limiters of movement Chippers Parking and sidewalk bollards Fence posts Axisymmetric forgings of the "Flange", "Ring", "Hub" types The constant striving forward and the rich scientific potential accumulated over many years of research work in the field of metallurgy and mechanical engineering are the key to success in the implementation of new projects, of which there are a significant number of our specialists. One of the latest achievements is the introduction of technology for producing axisymmetric forgings of the Flange, Ring, and Hub types by the method of end rolling from a hot-rolled pipe billet of our own production. The two technologies, harmoniously complementing each other, allow in a short time to set up the serial production of forgings of any complexity, which in turn provides a significant gain in the cost price and quality of the parts obtained, allowing you to successfully compete in the market, continuously increasing production volumes. Locks for tubing Tubing locks are used in order to increase the service life of technological tubing during underground workovers and workover of wells, due to a more than tenfold increase in the number of trips and eliminating the likelihood of damage to tubing by key and spider rusks.

Couplings for tubing are used in the maintenance and operation of oil and gas wells assembled with smooth tubing. Couplings are manufactured in accordance with the requirements of GOST 633-80, GOST R 52203-204 and GOST R 53366-2009. Tubing couplings are designed to connect tubing to each other, as well as underground equipment with threaded connecting surfaces. In special cases, tubing couplings are used for ground water supply communications. Bushings for connecting the links of the undercarriage of tracked vehicles are made from our own seamless hot-rolled billet pipes in accordance with TU 4182-015-10918450-2011. Manufactured by special order: -bushings with special requirements for mechanical properties, heat and mechanical treatment; -bushings for repairing caterpillar belts of domestic and imported equipment; The goods are certified.

Belt sander grinder KUPERTEK 3002 with vertical belt feed and 380 V connection Specifications: Overall dimensions: length 740-990 mm, width 370 mm, height 450 mm Weight: 32 kg Motor power: 1.1 kW Number of revolutions: 2840 rpm 380 V connection Belt width: 50 mm Belt length: 1000 ... 1500 mm Belt speed: 20 m / s Drive roller diameter: 135mm Table size: length 150 mm, width 250 mm Working height: 290 mm Tilt angle of the belt: 40 ° ... 110 ° Swivel mechanism - no