MIESAUOPT

Not approved icon Not verified supplier
Make a safe deal with this supplier. Apply
MIESAUOPT
Germany
USD 8.63/pcs 8.63
ready-to-use frost resistant especially for improvement work Ready-to-use dry concrete for concreting. Indoors and outdoors, for small concrete work, concreting of individual steps and concrete panels, as an extension of the screed for repair work, for concreting in gratings, ravines, etc. Consumption approx. 2.0 kg per 1 liter of fresh concrete
MIESAUOPT
Germany
USD 42.09/pcs 42.09
quick setting can be used indoors and outdoors reducing construction time Hydraulic bonding agent to produce cementitious screeds. Ready for installation in 7 days. Room for the production of composite screeds, screeds on composite layers and floating screeds as a laying substrate for various topcoats. Consumption about 2.5 kg/m² per cm of layer thickness
MIESAUOPT
Germany
Specify the price USD 0 0
Low Viscosity Forced Setting Forced Setting 2-component, solvent free, food safe, saponification resistant, compression free and low viscosity reactive epoxy resin. The material also cures in thick layers and forms a positive and tight bond with the substrate. Indoors and outdoors for grouting and filling narrow and deep cracks, holes and cavities. Consumption about 1.1 kg per liter of filling space
MIESAUOPT
Germany
USD 45.0/pcs 45.0
is a true drying accelerator independent of moisture ready to lay can be accurately calculated Fluid, chloride-free, universal accelerator for cement bonded screeds. The addition of water can be reduced due to the liquefaction effect and a faster laying readiness is achieved. In addition, it positively affects the consistency of the screed, resulting in improved processing in relation to tightening and smoothing. To achieve earlier laying readiness and especially suitable for heating screeds. Consumption Dosage from 2.0% = 5.0 kg to 3.0% = 7.5 kg Ready to lay after 12-14 days: 1.25 kg Screed accelerator X4 Per screed mix (250 l) at W/B value : max. 0.45 Ready to install after 3 – 5 days: 1.9 kg Screed Accelerator X4 per screed mixture (250 l) at W/B value: max. 0.45 Consumption approx. 7.5 kg/m³ screed Colour: transparent yellow
MIESAUOPT
Germany
Specify the price USD 0 0
color fast ready to use abrasion resistance Factory premixed, ready to use dry material consists of special, natural hard materials, Portland cement and dispersing agents. The spread product completely wets itself as it absorbs water from the concrete or screed mix and thus forms an extremely thick and compact painted surface. Low cost per m², high abrasion resistance, high impact resistance, high surface density, low oil and grease absorption, easier to clean. Consumption min. 3 kg/m² - depending on floor tension
MIESAUOPT
Germany
USD 34.54/pcs 34.54
colour fast ready to use abrasion resistance Hard grain spreader for concrete and screed floors. Factory pre-mixed, ready-to-use dry material consists of special, natural hard materials, Portland cement and dispersing agents. The inorganic pigments are resistant to cement, alkalis, light and guarantee long-term durability of the color of the floor. Dispersing agents absorb water from the concrete or screed mixture and thus form an extremely thick and compact painted surface. Low cost per m², high abrasion resistance, high impact resistance, high surface density, low oil and grease absorption, easier to clean. Consumption min. 3 kg/m² - depending on floor load
MIESAUOPT
Germany
USD 11.87/pcs 11.87
binds dust surface hardening high abrasion resistance Solvent-free, dust-binding, mineral, surface hardening impregnation for mineral substrates. Causes silicification of the surface and consequently increases the mechanical abrasion resistance. In addition, the impregnated, water- and dirt-repellent surface is achieved due to the high penetrating properties. Indoors and outdoors on horizontal and vertical mineral components. Consumption about 0.3 kg/m² depending on absorbency
MIESAUOPT
Germany
USD 13.0/pcs 13.0
plastic hardened without chlorides quick setting Powdery, hardened, chloride free, fast curing, hydraulic setting of flash setting solution. Indoors and outdoors, as well as in permanently wet areas, for fast installation for the transfer of dowels, door frames, handrails and washbasin consoles, as well as for improving and filling holes, cavities and cracks in concrete elements. Consumption of 1 kg gives about 0.7 liters of fresh solution
MIESAUOPT
Germany
USD 38.0/pcs 38.0
Single-component plastic-hardened quick setting one-component, cementitious, plastic reinforcement protection. The Repol BS7 reinforcing protection is very easy to process and does not require the application of quartz sand. Thanks to the mineral base components and the quick set recipe, excellent adhesion on steel and concrete is achieved. Consumption about 0.2 kg / sq.m of reinforcement in two stages of work. ColorGray
MIESAUOPT
Germany
USD 41.01/pcs 41.01
Single-component plastic-hardened quick setting one-component, cementitious, plastic reinforcement protection. The Repol BS7 reinforcing protection is very easy to process and does not require the application of quartz sand. Thanks to the mineral base components and the quick set recipe, excellent adhesion on steel and concrete is achieved. Consumption about 0.2 kg / sq.m of reinforcement in two stages of work. ColorGray
MIESAUOPT
Germany
Specify the price USD 0 0
Frost/anti-freeze wear resistant agent can be combined with gray concrete aggregate Mineral, powdered, hardened, weather resistant, hydraulically settable white aggregates for concrete repair in accordance with EN 1504-3 class R2. Indoors and outdoors for extensive filling of concrete surfaces, improving unevenness, gravel pockets, broken edges, wear to damaged areas, etc. For exposed concrete, different gray shades can be achieved and thus adapted to different concrete substrates by mixing in BS 05 Gray concrete filler. Consumption approx. 1.5 kg/m² mm
MIESAUOPT
Germany
USD 20.51/pcs 20.51
Frost/anti-freeze wear resistant agent can be combined with white concrete aggregate Mineral, powdered, hardened, weather resistant, fast setting, hydraulically settable gray aggregate for concrete repair, according to EN 1504-3 class R2. Indoors and outdoors for extensive filling of concrete surfaces, etc. For exposed concrete, by mixing in concrete filler BS 10 White various gray colors can be achieved and thus adapted to different concrete substrates. Consumption approx. 1.5 kg/m² per mm layer thickness
About company
Categories: Address:
Rehabilitation products, Construction Materials, Construction mixtures, Paints & varnishes, Self-adhesive film, Household chemicals, Household supplies Germany, St.Wendeler77 Bruchmühlbach-Miesau,66892

MUREXIN PRODUCTS Are you looking for suitable building materials for your current or planned building project? Discover the wide range of Murexin building materials here! In our six product divisions, you will find a variety of high quality construction products that are perfect for your project. Discover the suitable compensating or leveling compound for smooth surfaces, parquet. Processors appreciate the wide offer from Murexin as well as our service. Browse our range of products, plan your construction project with our service tools and find the right products for your construction project online! Let yourself be inspired by our building links. So nothing stands in the way of your next construction project! High quality of our products, excellent delivery reliability, flexibility of quick response to inquiries - all this makes us a reliable partner through and through.

Contact supplier
Supplier:
"Узлегпром"
Write to us, we are online!