Car races - 41196

MOHAVE DIESEL 3.0 4WD J THE MASTER MOHAVE 4WD 2019, J THE MASTER configuration, volume 3.0 diesel, four-wheel drive, perfect condition, not broken, not painted, not drowned, mileage 32344 km, new car condition, 3 rows of seats, 7 seater , leather interior, Airbag, ABS, wheels 19 inches, air conditioning, climate control, The price is without delivery and customs duties. I also accept orders for the search and selection of any car and special equipment according to all the requirements and wishes of the client from the dealerships of South Korea, sending to all regions of Russia, as well as to the countries of Kyrgyzstan and Kazakhstan.

The fourth generation Sorento was introduced in February 2020. Equipped with three types of engines: 2.2 (199 hp) liter diesel engine. The price is indicated without delivery and customs duties. I also accept orders for the search and selection of any car and special equipment according to all the requirements and wishes of the client from the dealerships of South Korea, sending to all regions of Russia, as well as to the countries of Kyrgyzstan and Kazakhstan.

  4 Stroke Low-emission 125CC High Speed Motorcycle City Gasoline Motor Bike for Adults   This 4-stroke, low-emission 125CC motorcycle delivers high-speed performance with a max speed of ≥80KM H. It features a brushless motor and is certified UL2849, ensuring compliance with rigorous safety standards, which provides market access and reliability for buyers.

FLOWMATE Food Grade Pump Water Pump Diaphragm Pump KDP-14 series 12V/24V DC Pump Electric Pump Permanent Magnet Brush/brushless Motor Assemblied Open Flow 1-2LPM Designed for General Purpose Water Dispenser Coffee Machine Auto Vending Machine Portable Electric Sprayer etc.   Product label: FLOWMATE, KDP-14, Pump, Water Pump, Diaphragm Pump, Membrane Pump, Mini Pump, Micro Pump, DC Pump, DC Water Pump, DC Diaphragm Pump, DC Membrane Pump, Mini Water Pump, Mini Diaphragm Pump, Mini Membrane Pump, Micro Water Pump, Micro Diaphragm Pump, Micro Membrane Pump, Electric Pump, Electric Water Pump, Electric Diaphragm Pump, Electric Membrane Pump, Brush Pump, Brushless Pump, Food Grade Pump, Water Dispenser Pump, Water System Pump, Coffee Machine Pump, Vending Machine Pump, Ice Maker Pump, Agriculture pump, Electric Sprayer Pump,  Self-priming pump, micro self-priming pump, mini self-priming pump, self-priming water pump, self-priming diaphragm pump   Diaphragm Pumps are used extensively in many industries and can handle a very wide variety of liquids. Diaphragm Pumps are in the category of "positive displacement" pumps because their flowrates do not vary much with the discharge "head" (or pressure) the pump is working against (for a given pump speed). Diaphragm Pumps can transfer liquids with low, medium or high viscosities and also liquids with a large solids content. They can also handle many aggressive chemicals such as acids because they can be constructed with a wide variety of body materials and diaphragms   Features 1. Food grade2. Small size and easy installation3. Low noise with smooth running4. Self-priming with dry suction 1-2.5 meters5. Dry run without damage6. Long life permanent magnet DC brush motor7. Varible hosing port can be customized 8. Explosion proof design for flammable refrigerants9. Handling cold water and hot water 0-100℃   Applications 1. Water dispenser 2. Coffee machine 3. Vending machine 4. Ice maker 5. Tea table water dispensing 6. Integrated stove 7. Medical equipment 8. Chemical instrument 9. Electric sprayer 10. Wine taker 11. Water purifier/filtration   Specifications Model Hosing Port Rated Volts (VDC) Rated Amps (A) Open Flow (L/min) Noise 30CM (dB) Dry Suction (m) Head (m) Output Pressure (MPA) Weight (KG) Duty Cycle KDP-14 Φ1/4"(6.5mm) OD Pipe 12 0.2 0.8±0.2 43 1.0/1.8 2 0.08 (10PSI) 0.25 Intermittent 12/24 0.3/0.15 1.0± 0.2 45 1.2/2.0 5 0.15 (20PSI) 0.25 Intermittent 12/24 0.4/0.2 1.2± 0.2 48 1.5/2.5 7 0.2 (30PSI) 0.25 Intermittent 12/24 0.5/0.3 1.4± 0.2 50 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.6/0.35 1.6± 0.2 52 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.7/0.4 1.8± 0.2 54 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 0.8/0.5 2.0± 0.2 56 1.5 10 0.3 (45PSI) 0.25 Intermittent 12/24 1.0/0.6 2.3± 0.3 58 1.5 10 0.3 (45PSI) 0.25 Intermittent Tested with clean water at 25℃。   Wetted Parts Material Construction Pump housing - PP/PP+20%GF Pump covers - PP/PP+20%GF Diaphragms - Silicone/EPDM/VITON/Santoprene TPV Check valve sealings - Silicone/EPDM/VITON   Performance Curve   Dimension Drawings  

Sold in stock and to order Chinese-made cars

Hello. Please check the prices for spare parts for Chinese cars. The price list shows the price in China. For spare parts of interest that are not in the price list, we discuss them individually. We deliver goods to any city in Russia.

Pneumatic compressor.

Fallen Polymer - offers wholesale supplies of its own production - a product for the repair of plastic parts made of polypropylene (PP) and its derivatives. Black triangular rod for repairing parts with a thickness of more than 2.5 mm. Suitable for cases when it is necessary to hide traces of repair of black parts. Recommended for professional use. Product for the repair of plastic parts made of polypropylene (PP) and its derivatives. A 10-meter long triangular rod of black color allows you to hide traces of repairs on black parts. This material is perfect for repairing parts with a thickness of more than 2.5 mm. The advantage of packaging in the form of a coil is a solid long rod, when working with which there are no unused sections, it also ensures mobility, compactness, ease of operation and storage. The welding strength of this material is so high that it does not require laying transverse overlaps in any places other than the exit of the seam, which saves filler rod and working time. If you need a material with identical characteristics, but at a more attractive price with a bright blue rod that allows you to work in rooms with limited lighting, we recommend considering the product fp60017. During the repair process, the material has elastic deformation and is welded in the range of 280-330 C, depending on the additives filling the plastic. Reaching the required temperature for welding can be determined visually when a tear-like shine appears on the part being repaired and on the filler rod. If it is necessary to deform the part, it is enough to heat it to a temperature of 160 - 180 C and give it the desired shape. The strength of a repair seam when welded with original Fullen Polymer materials, subject to welding technology, is about 70-80% of the nominal value.

2023 BYD SONG PLUS EV

We will buy and bring to Russia a new car of any model.

We will drive any car from China to any region of Russia