ООО «Илмакс»

Manufacturer: PTK PTC RILON MIG 180 GDM is an updated line of machines for semi-automatic welding, which is produced at the RILAND plant. Manufactured using high quality power IGBT transistors. The use of advanced inverter technologies has increased the efficiency up to 80% and increased welding productivity by 30%.Features:Modern welding digital semiautomatic device for welding in shielded gases with synergetics. Synergic welding control settings allow you to select the optimal parameters for welding current, arc length and inductance. This takes into account the type and composition of the shielding gas.MIG mode for welding in carbon dioxide MIG / CO2 and in a welding mixture Ar / CO2 MIG / MIX.Choice of 2-stroke and 4-stroke welding torch operating modes. The function is applicable when welding short or long seams. Additional function for TIG LIFT TIG welding. Allows the use of tungsten electrodes with a diameter of 1.0 to 4.0 mm.Additional function of manual arc welding MMA. Allows the use of coated electrodes with a diameter of 1.5 to 5.0 mm.In MMA mode, there is a function for limiting the open-circuit voltage. VRD reduces source idle when mains short-circuited for safe operation.The digital display allows for precise parameter setting.Thermal protection function with overheating indication.Equipment:Inverter semi-automatic welding machine - 1 pc.Semi-automatic burner 15 series - 1 pc.Grounding terminal - 1 pc.

Manufacturer: Svarog The PRO MIG 200 (N229) series machine is designed for semi-automatic welding in shielded gases (MIG / MAG), flux-cored wire (FCAW), as well as manual arc welding with coated electrode (MMA) and argon arc welding (TIG) *.Key features:Synergic control systemReversal of current polarity, flux-cored wire weldingDry wire run and test gas purgeAluminum weldingWelding modes 2T and 4TMMA welding with Arc Force functionTIG weldingVRD functionCompact dimensions, low weight

Manufacturer: Svarog The PRO TIG 200 P DSP AC / DC (E201) series machine is designed for professional AC and DC argon arc (TIG) welding and for manual arc welding (MMA). In TIG mode, spot welding is possible.Key features:Touch control panelDC and AC weldingPulse and spot * weldingOperating modes 2T / 4TPolarity balance adjustmentArc afterburner control and antistick function for MMA weldingIntelligent cooling system

Manufacturer: Svarog The REAL TIG 200 P AC / DC (E20101) series machine allows high-quality argon-arc (TIG) welding at direct and alternating current, as well as in normal and pulsed mode. The inverter can also be used for manual covered electrode arc (MMA) welding.Stable operation at mains voltage from 160 VPulse welding mode with adjustable pulse frequency2T / 4T working modeHigh-quality welding from 5 AAdjustable polarity balance and AC frequency up to 250 HzAdjustable post-gas post-flow timeIntelligent cooling systemPedal connectionNAKS certificate is provided for an additional fee

Manufacturer: Svarog The PRO TIG 200 P DSP (W212) series machine allows for high-quality, comfortable argon arc (TIG) and manual arc welding with a covered electrode (MMA). In TIG mode, spot * and pulse welding are possible.Key features:Touch control panelPulse welding setupSpot welding setupMMA welding with Hot Start, Antistick functionsArc afterburner adjustment for MMA welding

Description Manufacturer: Svarog The device of the REAL CUT 45 (L207) series for plasma cutting allows fast cutting of any conductive materials: stainless and galvanized steel, aluminum, copper, brass, etc. The built-in pressure gauge allows for precise setting of the working pressureKey features:Stable operation at mains voltage from 160 VCutting thickness up to 12 mmHigh frequency arc ignitionBuilt-in pressure gaugeRobust case

Description Manufacturer: KEDR Argon-arc welding machine KEDR UltraTIG-200P AC / DC, 220V is an irreplaceable universal tool for any workshop or repair team. Pulse mode with both alternating and direct current facilitates the welding process and helps to obtain welded joints with a constant penetration depth, beautiful appearance and uniform geometric dimensions. In any operating conditions, UltraTIG-200P AC / DC will allow you to realize the most daring projects, regardless of the material being welded.FEATURES:Digital control panelNon-contact HF arc ignitionTIG welding with direct and alternating currentWide functionality of linear, pulse, DC and AC TIG weldingTIG welding with tacksSetting the downslope and post gas timeMMA welding capabilityArc Force, Hot Start and Anti Stick for MMA WeldingEQUIPMENT:TIG welding machineCable with ground terminalTIG welding torchConsumable setUser's manual

Manufacturer: Svarog The PRO TIG 200 DSP (W207) series machine allows for high-quality, comfortable argon arc (TIG) welding and manual coated electrode (MMA) welding.Key features:Touch control panel2T and 4T welding modesAdjusting the falling time of the welding currentGas post-flow time adjustmentMMA welding mode

Description Manufacturer: Svarog The REAL TIG 200 P (W224) series machine allows you to produce high-quality argon arc welding (TIG DC). Welding work can be carried out both in normal and pulse mode. The inverter can also be used for manual covered electrode arc (MMA) welding.Key features:Stable operation at mains voltage from 160 VPulse welding mode with adjustable pulse frequency: 0.2-200HzAdjustable downslope time: 0-5 sec2T / 4T working modeMMA welding with Arc Force adjustmentHigh-quality welding from 10 AAdjustable post-gas post-flow timeIntelligent cooling systemHigh frequency arc ignitionRobust case

Manufacturer: PTK PTK MASTER MIG 230 SYNERGY D88 is a modern welding digital semiautomatic device for welding in shielded gases with synergetics. The device is equipped with the additional function of manual arc welding MMA and TIG welding in a shielded atmosphere Lift TIG.Synergic welding control settings allow you to select the optimal parameters for pulses and welding current. This takes into account the thickness, properties of the metal product and welding materials - the diameter of the welding wire, the type and composition of the shielding gas.MIG and MIG SYN functionality:Gas selection: Carbon Dioxide, Argon / Carbon Dioxide Mix, No Gas for Flux Cored Wire, not applicable in MIG SYN mode.Adjusting the inductance allows you to additionally adjust the hardness of the welding arc. Choice of 2-stroke and 4-stroke welding torch operating modes. The function is applicable when welding short or long seams.Hot start in MIG mode provides easy and smooth arc striking.Wire feed speed before primary closure, which facilitates arc striking in MIG mode.Wire annealing time to facilitate re-ignition.MMA mode functionality:The adjustable arc afterburner improves the stability of the electrode burning.Hot start in MMA mode allows you to easily ignite the welding electrode by briefly increasing the welding current at the start of welding.Reduced open circuit voltage for safe operation.

Manufacturer: PTK PROFI TIG 200 P AC / DC is an updated line of PROFI devices, which operates from a 220V supply network in the range of ± 15% without derating. It is a versatile industrial TIG welding machine that is equipped with an optional manual arc welding (MMA) function.The device is designed for argon-arc welding with a non-consumable tungsten electrode at direct current (DC) of such metals as steel, nickel, copper and their alloys. Welding of aluminum and its alloys is performed on alternating current (AC). If you work in MMA mode, then for welding metals it is necessary to use electrodes with basic and rutile coating.Features:The presence of pulse welding for work with thin sheet metal. The function prevents metal from burning and deformation.2T / 4T welding torch operating modes. The function is used when welding short or long seams. Gas after welding. The purge time avoids oxidation of the tungsten electrode and protects the TIG torch and accessories from premature wear.Additional function of manual arc welding MMA. Allows the use of stick electrodes with a diameter of 1.5 to 4.0 mm.The presence of an adjustable arc afterburner, which improves the stability of the electrode burning. Significantly reduces the likelihood of unintentional arc interruption. All this affects the quality of the seam and its continuity.A remote control pedal can be connected to the unit. The remote control is not included in the package.1 year warranty.

Manufacturer: Svarog Welding machine REAL MIG 200 (N24002N) Black series “WE PRESERVE TRADITIONS. SUPPORTING INNOVATION ”was released in a unique design and in limited quantities. It differs from the standard REAL MIG 200 (N24002N) model in its stylish design and extended complete set.The REAL MIG 200 (N24002N) Black series machine is designed for semi-automatic welding in shielded gases (MIG / MAG), flux-cored wire (FCAW), as well as manual arc welding with a covered electrode (MMA).Key features:Updated case design: plastic grille on the frontAdded inductance adjustmentConvenient rubberized adjusterStable operation at mains voltage from 160 VReversal of polarity, flux-cored wireAluminum weldingDry run and afterburning of welding wireMMA weldingRobust metal wire feeder