Clamp heaters - 97585

Logistic Auto LLC is a major supplier and exporter of milled peat. We invite you to conclude a contract for the supply of milled peat with the following characteristics: High separated peat in big bags with a volume of 5000 liters. Characteristics: pH aqueous 3.5-4.5% - acidic 5.5-6.5-neutralized. Humidity no more than 65% * separated peat, acidic 8 separated peat, neutralized.

Charcoal briquettes are a high-quality fuel and can also be used in the production of crystalline silicon to replace part of the lump charcoal. Briquettes have high mechanical strength (6.9-9.8 MPa), increased density (0.9-1 g/cm3), high calorific value (30,000-32,000 kJ), and low hygroscopicity. Charcoal briquettes are a modern high-calorie biofuel produced using special equipment from charcoal screenings using the pressing method. The plant origin of the raw materials provides this fuel with exceptional environmental friendliness when used in any required quantity. Charcoal fuel briquettes are the same charcoal, only compressed. Food starch is used as a binder. A positive aspect when using charcoal briquettes as fuel is their minimal impact on the environment during combustion compared to classic solid fuel (no slag, increased smoke, and other carcinogenic substances). They combine all the advantages of charcoal, while having undeniable advantages.

We are a Supplier of wholesale and distributor of wood pellets, we offer EN plus A1 wood pellets in 15 kg bags. There is a possibility of delivery in the form of a big bag available in the amount of 500 tons/month. All There are 70 bags of 15 kg (1050 kg) on ​​the pallet. There is a possibility of delivery directly to the place indicated by the customer.

Wood pellets class A1. Diameter: 6mm-8mm. Low dust content <1% High ash melting point >1200°C. Made from the finest virgin forests. Categories: Energy, WOODEN PELLETS. Description: 6 mm wood pallets are a convenient, economical and effective way to heat your home or company using domestic and external fuel. 6mm softwood pallets: hardwoods such as maple, oak, birch and ash. We all know that we need to place conifers such as pine, fir and spruce. Consumption of wood pellets in Europe: The majority of consumption is for heat production, accounting for 61.8%. The consumption of pallets for heating can be divided into three markets: home heating (69%), commercial heating (19%) and heat generated by combined heat and power plants (12%). The remaining 38.2% of wood pallets were used for energy production. It is important to note that technologies for producing energy from pallets into heat, electricity or both are mature and offer efficient and reliable processes. Benefits of 6mm thick wood pallets: If you want a reliable source of heat, save money and help protect the environment, 6mm thick biomass wood pallets are a great choice. When pallets are burned, they release the same amount of carbon dioxide that woody biomass absorbs during growth, making them carbon neutral.

Air heating may be needed in both domestic and industrial environments. To do this, you need to use a special air heating element, which will successfully cope with tasks of any complexity. If you want to buy high-quality dry electric air heating elements, the price of which will be reasonable, PC "Marion" is ready to offer you its services. Our company practices an individual approach to the situation of each client. Technical characteristics: - Length of the heating element (length of the metal shell of the heating element when unfolded) up to 6000mm - Diameter of the heating element tube: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm - Shape and configuration of heating element: any, specifying dimensions or according to drawings and sketches. - Power: calculated taking into account the operating parameters of the heating element. depending on diameter, tension, length. - Working environment: air and other gases and mixtures of gases, casting molds, compression molds, defrosting refrigeration units. - Voltage: on request 12; 24; 36; 42; 48; 60; 127; 220; 380. - Options or material for manufacture: stainless steel, carbon steel, titanium, seamless stainless steel. - Contact group options for connection: threaded rod, flat pin contact, welded insulated wire with or without a sealed rubber coupling and other options on request. - Mounting strips: if necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes. - Complete with threaded fittings: m18, m12, m10, m14 and others. materials - stainless steel, brass, carbon steel.

At Marion you will find a wide range of water heating elements of various price categories. The company's warehouse has heating elements of various shapes and designs, and you can also order the production of heating elements to order. The price of such a device is quite reasonable and fully corresponds to its high quality. Manufactured according to GOST from high quality materials. Production time according to specifications is 7-10 days. Urgent production by agreement. Shipment of warehouse items on the day of payment Availability of certificates. 12 month warranty. Additional discounts for orders of 10 pieces or more. Regular customers receive various bonuses, discounts, deferred payment, free delivery. Delivery to any city in Russia. Material: Carbon steel; Stainless steel; with fins; with Teflon coating; seamless pipe; in a fluoroplastic shell.

Heating element for oil of the highest quality. Technical characteristics: Heating element length (length of the metal shell of the heating element when unfolded) up to 6000 mm. Heating element tube diameter: 18; 16; 13; 10; 8.5; 8.0; 7.4; 6.5 mm (on request we can produce other diameters that differ from GOST) Shape and configuration of the heating element: any, specifying the dimensions or according to drawings and sketches. Power: Calculated taking into account the operating parameters of the heating element depending on diameter, voltage, length. Working medium: solution of alkalis and acids; air and other gases and mixtures of gases; Fats, oils and other viscous liquids; alkali; Low-melting Metals; Aggressive solutions of alkalis and acids; Voltage: On request 12; 24; 36; 42; 48; 60; 127; 220; 380. Options or material for construction: Stainless steel, carbon steel, finned, titanium, PTFE sheathed, Teflon coated, seamless stainless steel. Contact group options for connection: Flat pin contact, welded insulated wire with and without a sealed rubber coupling, threaded rod and other options on request. Mounting strips: If necessary, complete with various mounting strips of different sizes and shapes with and without threaded holes.

The Marion company is a direct supplier of terminal blocks made of porcelain and ceramics from various manufacturers and has a large selection of sizes available for different wire cross-sections. Ceramic terminals for connecting wires Werit (Germany) and Electric ceramic (China). With mounting hole. Insulating material Porcelain, glazed. Terminal made of brass or copper, nickel plated Screws galvanized steel, yellow chrome plated. Heat resistance up to 350 C. Operating temperature 200 C.

We offer the production of industrial ring heaters in accordance with the customer’s sketches and technical requirements. - production time from 3 days. - sealed nozzle heaters made of brass are available in stock Ø from 25mm to 100mm with different widths and power. - heating element: nichrome tape or insulated spiral. - type of insulation: micanite in the housing, ceramics in the housing, cast aluminum. - manufactured according to GOST from high quality materials, certificates, 12 month warranty. Technical characteristics: bore diameter: 25-1000mm width: from 15mm supply voltage: 12v, 24v, 36v, 110v, 220v, 380v and other values on request. power: calculated according to the permissible specific power load or manufactured according to the customer’s required characteristics.

Technical characteristics of TENP: heater diameter: 6-25 mm. heater length: 40-3500mm supply voltage: 12v, 24v, 36v, 110v, 220v, 380v and other values on request. Shell material: stainless steel, carbon steel available on request. power: calculated according to the permissible watt load for the application in the required conditions. water = 15W/cm; air = 5W/cm; metal forms = 15W/cm, values for other operating conditions on request. operating temperature on the heater surface: 300°C, on request special versions 500°C and higher. equipment with fittings: m10-m27; g1/2; g3/4; g1; g1 1/4, (brass, stainless steel, carbon steel). Application: - for heating metal forms by mounting them into the body of the workpiece in a drilled hole, - for heating air and gases, - for heating fats and oils, - for water and weak solutions of acids and alkalis.

ENGL tape is your opportunity to provide heating of liquids and materials in hard-to-reach places. Among other things, tape heating elements are used when it is necessary to organize heating of such systems and devices: Pipes, drains, sewers; heating of screws of extruders, injection molding machines, injection molding machines; heating of tanks, cylinders and containers; heating in greenhouses; heating of control cabinets and regulating equipment; shut-off valves; tanks, barrels, various technological containers; refrigeration units; laboratory equipment; industrial equipment and tools; polymerization ovens; gas pipeline

Finnish manufacturers of equipment for saunas and baths Harvia, Savo and Helo have proven themselves in the market. The combination of historical experience and modern technology has allowed these brands to gain the trust of many vaping enthusiasts. On the Marion company website you can buy heating elements for Harvia, Sawo and Helo at an affordable price from the manufacturer! All heating elements for furnaces are made of stainless steel with a high nickel content AISI 309. This ensures a longer service life compared to other types of steel. Technical characteristics: Heating element tube diameter: 8.5 mm. Place of application: electric furnaces (electric heaters) and steam generators. Power from 1500 to 5250 W. Manufacturing material - AISI 309 stainless steel - with a high nickel content. The shape and configuration of the heating element depends on the selected model. Contact group for connection - flat pin contact. Mounting strips: stainless steel flange, sealed flange.