Installation ULV-3 for continuous upward casting of solder rods - 38641

High-frequency screens are designed for dry or wet screening of bulk materials with a bulk mass of not more than 2.8 t / m³, deslimetting, dehydration, and also washing suspension from beneficiation products. Can be used for sand, ores and a wide variety of other materials.

Self-balancing inertial screens are designed for screening bulk materials with a bulk density of 1.4 t / m ³ . They are used in the operations of dewatering, desliming wet and dry, screening of coal, anthracite and oil shale, as well as for separating suspension from beneficiation products.

We are engaged in both the development of new production facilities and engineering - the integration of various equipment into existing lines and factories involved in: processing of nonmetallic materials; processing of metallurgical slag and disposal of metal-containing waste, disposal of industrial waste; processing and disposal of construction waste; production of building materials. Our company has accumulated significant experience in the field of laboratory research of various mineral raw materials: ores, non-metallic materials, coals. Using our own design team together with technologists, we are ready to perform tasks of varying technical complexity.

Production of modern modular semi-mobile washing lines for separation (enrichment) of sand by size classes: 0.05; 0.071; 0.1; 0.16; 0.2; 0.63; 1.0; 2.0 and 5.0 mm. These models of SGU sieve hydrocyclone plants are designed for different capacities: 20 t / h, 40 t / h, 60 t / h and 120 t / h. Each of these installations can be adjusted for individual customer requirements (coal sludge, sand, limestone and granite screening, metallurgical waste, thermal power plant sludge, etc.).A typical model of SSU consists of:- a sump of the circulating pulp, which receives the starting material and water, but often the prepared suspension is supplied;- a classification unit, which consists of a slurry pump that creates the necessary pressure to feed the slurry, a hydrocyclone of the required diameter (which affects productivity) and shape (which affects the separation size), separating the watered target product "sands" and the suspension "drain" containing dusty and clay particles (usually waste of enrichment), as well as pipelines and shut-off equipment;- dehydrating high-frequency screen GVCh with special sieves (polyurethane, rubber urethane or stainless steel sieves), which brings the final product to the required moisture class.This set of equipment is enclosed in a common semi-mobile frame and is equipped with ladders and walkways for quality control and maintenance.The sieve hydrocyclone unit operates on a partially closed cyclic principle. Its basis is a reservoir, which receives the initial mixture of sand, clay inclusions and water, in which the slurry level is kept within a certain range. In fact, the reservoir is needed to provide a certain concentration of the mixture that the centrifugal pump is able to lift into the hydrocyclone. In a hydrocyclone (or in double hydrocyclones), due to centrifugal forces, almost 100% of particles larger than 100 microns and 50-80% of particles larger than 40-80 microns are classified, which in the form of a highly concentrated mixture are discharged from the cyclone onto a dehydration (dehydration) screen located under the hydrocyclone. Smaller particles (which should contain all clay particles and other inclusions) are carried away with the main volume of water from the hydrocyclone into a system that divides the flow (automatic regulation by a valve) into a return to the tank and a drain, which is sent to the water purification system. The dewatering screen is equipped with polyurethane or rubber modular screens with openings (usually 0.3-1.5 mm), through which water efficiently drains into the tank, and sand particles slide to the discharge chute and are discharged onto the product conveyor. The content of dust particles in the sand will decrease to 0.02-0.9%.We strongly recommend that before choosing sorting or classifying equipment that is planned to solve your problem, it is imperative to carry out the necessary research of raw materials in our laboratory.

Metalworking equipment BENDMAK MACHINERY.

Description:    DC  motor Phase:     12solt  8 pole Voltage:   DC12v  24v  48v Frequency:      50/60HZ Out Power:      50w Type of bearing:      Ball bearing Protection:      Thermal cutoffs or Automatic reset thermal protector Rotation: CW. or CCW. Speed:     3000rpm   We are a brushed DC motor manufacturer, our products including DC brushed motor, packing machine brushed DC motor, reducer brushed DC motor, water pump brushed DC motor, air pump brushed DC motor, blower brushed DC motor, hand tools brushed DC motor, etc.

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Organic waste to fertilizer production line uses the organic waste as the raw material, such as organic waste, straw, excrement from people, livestock and poultry, cake meal, agricultural and sideline products, then it is fermented, deodorized and thoroughly decomposed to be made fertilizer. Raw Materials Agricultural waste : Straw,dregs of beans,cotton dregs,rice bran,etc Livestock/human waste: Mixture of poultry litter(PL) and livestock/animal/human waste,slaughterhouse waste,fish maket,urine and dung of cattle,pigs,sheep,chicken,ducks,geese,goat,etc Industrial waste: Wine lees,vinegar residue,manioc waste,sugar scum,furfural residue,etc Home scrap: Food waste,bones,the roots and leaves of vegetables,etc Mineral: Humic acid,bentonite,dolomite,etc Others : Sludge of the rive,the sewer,etc Working principle The process of organic fertilizer production line is as follows: 1.Raw material fermentation – 2 Automatic belt scale batching system —-3 Crushing, mixing — 4 Disc granulation, drum granulation, extrusion granulation —-5 Dryer, Drying Organic Fertilizer Granules—6 Cooling Machine, Cooling Organic Fertilizer Particles—–7 Screening Machine. Screening Out Qualified Organic Fertilizer Particles—–Intelligent Small Fertilizer Equipment|Intelligent Small Organic Fertilizer Production Line L-8 Coating Membrane machine, coated film granules, making the granules smoother—-9 Packing scale, automatic filling organic fertilizer granules –10 seal

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Compound fertilizer production line is widely applied to produce compound fertilizer and the capacity ranges from 5000-200,000 tons/year. It can granulate NPK, NP, ANP, DAP, MAP, CAN, SSP and other materials into compound fertilizer particles in one processing line. This equipment is specially used for manufacturing compound fertilizers with different concentrations and types, such as organic fertilizers, inorganic fertilizers, biological fertilizers and magnetic fertilizers, etc. It is mainly used for producing spherical particles with a diameter ranging from 1mm to 3mm. The compound fertilizer production line has less investment, quick results and good economic benefits. The whole equipment process is compact, scientific and advanced. Energy saving and consumption reducing, no waste removal, stable operation, reliable running, convenient maintenance. The adaptability of raw materials is wide, and the machine is suitable for the granulation of compound fertilizer, medicine, chemical industry, feed, etc., and the granulation rate is high. This production line can produce various compound fertilizer with different concentration and different types (including organic fertilizer, inorganic fertilizer, biological fertilizer, magnetic fertilizer, etc.). In particular, the granule for tombarthite and ammonium carbide compound fertilizer fills the domestic void and lead the country.  

Use of solid-liquid separator It is widely used in the separation of slag-liquid of high concentration organic sewage such as animal manure wine tank dregs starch residue sauce residue of various intensified farms which raise pigs chickens cattle and horses. Characteristics of inclined screen solid-liquid separator(1) It has the functions of sorting and filtering large & heavy materials first and integrates transmission pressing dewatering and sand removal which solves the problems of garbage winding equipment and closed operation.(2) The separation rate of floating suspended matter and sediment in manure can reach more than 95% and the solid content of slag can reach more than 35%.(3) It has automatic liquid level control function which saves more than 50% of electricity consumption and lows operating cost compared to similar equipment.(4) The contact part between the equipment and the treatment medium is made of high-quality stainless steel and is acid-passed and passivated. The corrosion resistance is several times stronger than that of ordinary stainless steel which prolongs the service life. Advantages of inclined screen solid-liquid separator(1) Oblique sieve separator is suitable for solid-liquid separation of low concentration sewage.(2) The inclined sieve type solid-liquid separator requires the moisture content of the material to be more than 90% and the solid content of the material is 0.3mm or more.(3) High processing capacity less solid-liquid loss and the solid content of wastewater after treatment can be less than 1% easy to operate.(4) less investment and small installation area. Application of inclined screen solid-liquid separator(1) Biogas power generation heating.(2) Fertilization of Vegetables farmland fruit trees and forest. It can also be raw materials for organic fertilizer.(3) Sold to organic fertilizer plant as organic fertilizer raw material or self-made organic fertilizer.