Machinery & equipment in bulk on Qoovee

High-frequency screens are designed for dry or wet screening of bulk materials with a bulk mass of not more than 2.8 t / m³, deslimetting, dehydration, and also washing suspension from beneficiation products. Can be used for sand, ores and a wide variety of other materials.

Self-balancing inertial screens are designed for screening bulk materials with a bulk density of 1.4 t / m ³ . They are used in the operations of dewatering, desliming wet and dry, screening of coal, anthracite and oil shale, as well as for separating suspension from beneficiation products.

We are engaged in both the development of new production facilities and engineering - the integration of various equipment into existing lines and factories involved in: processing of nonmetallic materials; processing of metallurgical slag and disposal of metal-containing waste, disposal of industrial waste; processing and disposal of construction waste; production of building materials. Our company has accumulated significant experience in the field of laboratory research of various mineral raw materials: ores, non-metallic materials, coals. Using our own design team together with technologists, we are ready to perform tasks of varying technical complexity.

Production of modern modular semi-mobile washing lines for separation (enrichment) of sand by size classes: 0.05; 0.071; 0.1; 0.16; 0.2; 0.63; 1.0; 2.0 and 5.0 mm. These models of SGU sieve hydrocyclone plants are designed for different capacities: 20 t / h, 40 t / h, 60 t / h and 120 t / h. Each of these installations can be adjusted for individual customer requirements (coal sludge, sand, limestone and granite screening, metallurgical waste, thermal power plant sludge, etc.).A typical model of SSU consists of:- a sump of the circulating pulp, which receives the starting material and water, but often the prepared suspension is supplied;- a classification unit, which consists of a slurry pump that creates the necessary pressure to feed the slurry, a hydrocyclone of the required diameter (which affects productivity) and shape (which affects the separation size), separating the watered target product "sands" and the suspension "drain" containing dusty and clay particles (usually waste of enrichment), as well as pipelines and shut-off equipment;- dehydrating high-frequency screen GVCh with special sieves (polyurethane, rubber urethane or stainless steel sieves), which brings the final product to the required moisture class.This set of equipment is enclosed in a common semi-mobile frame and is equipped with ladders and walkways for quality control and maintenance.The sieve hydrocyclone unit operates on a partially closed cyclic principle. Its basis is a reservoir, which receives the initial mixture of sand, clay inclusions and water, in which the slurry level is kept within a certain range. In fact, the reservoir is needed to provide a certain concentration of the mixture that the centrifugal pump is able to lift into the hydrocyclone. In a hydrocyclone (or in double hydrocyclones), due to centrifugal forces, almost 100% of particles larger than 100 microns and 50-80% of particles larger than 40-80 microns are classified, which in the form of a highly concentrated mixture are discharged from the cyclone onto a dehydration (dehydration) screen located under the hydrocyclone. Smaller particles (which should contain all clay particles and other inclusions) are carried away with the main volume of water from the hydrocyclone into a system that divides the flow (automatic regulation by a valve) into a return to the tank and a drain, which is sent to the water purification system. The dewatering screen is equipped with polyurethane or rubber modular screens with openings (usually 0.3-1.5 mm), through which water efficiently drains into the tank, and sand particles slide to the discharge chute and are discharged onto the product conveyor. The content of dust particles in the sand will decrease to 0.02-0.9%.We strongly recommend that before choosing sorting or classifying equipment that is planned to solve your problem, it is imperative to carry out the necessary research of raw materials in our laboratory.

Metalworking equipment BENDMAK MACHINERY.

Description:    DC  motor Phase:     12solt  8 pole Voltage:   DC12v  24v  48v Frequency:      50/60HZ Out Power:      50w Type of bearing:      Ball bearing Protection:      Thermal cutoffs or Automatic reset thermal protector Rotation: CW. or CCW. Speed:     3000rpm   We are a brushed DC motor manufacturer, our products including DC brushed motor, packing machine brushed DC motor, reducer brushed DC motor, water pump brushed DC motor, air pump brushed DC motor, blower brushed DC motor, hand tools brushed DC motor, etc.

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Organic waste to fertilizer production line uses the organic waste as the raw material, such as organic waste, straw, excrement from people, livestock and poultry, cake meal, agricultural and sideline products, then it is fermented, deodorized and thoroughly decomposed to be made fertilizer. Raw Materials Agricultural waste : Straw,dregs of beans,cotton dregs,rice bran,etc Livestock/human waste: Mixture of poultry litter(PL) and livestock/animal/human waste,slaughterhouse waste,fish maket,urine and dung of cattle,pigs,sheep,chicken,ducks,geese,goat,etc Industrial waste: Wine lees,vinegar residue,manioc waste,sugar scum,furfural residue,etc Home scrap: Food waste,bones,the roots and leaves of vegetables,etc Mineral: Humic acid,bentonite,dolomite,etc Others : Sludge of the rive,the sewer,etc Working principle The process of organic fertilizer production line is as follows: 1.Raw material fermentation – 2 Automatic belt scale batching system —-3 Crushing, mixing — 4 Disc granulation, drum granulation, extrusion granulation —-5 Dryer, Drying Organic Fertilizer Granules—6 Cooling Machine, Cooling Organic Fertilizer Particles—–7 Screening Machine. Screening Out Qualified Organic Fertilizer Particles—–Intelligent Small Fertilizer Equipment|Intelligent Small Organic Fertilizer Production Line L-8 Coating Membrane machine, coated film granules, making the granules smoother—-9 Packing scale, automatic filling organic fertilizer granules –10 seal

The rapid development of livestock and poultry farming produces a lot of excrement and sewage. The harmful elements of these fouling are too high to be processed by traditional returning way. For this situation, our company has developed the organic fertilizer production line which use high efficient solid-liquid rotten aseptic deodorization technology as the core, and the whole production equipment process includes: high efficient fermentation, raw material mixing, granule processing, drying and packing. Characteristics of Performance  The products of organic fertilizer production line are made of fresh chicken and pig manure, without any chemical composition. The digestive ability chickens and pigs is poor, so they can only consume 25% of nutrients, then another 75% in feed will be excreted with faeces, so that the dry product will contain nitrogen, phosphorus, potassium, organic matter, amino acid, protein and other ingredients. In the urine and manure of livestock, a year of excrement urine of a pig, combined with the cushion material can be retted 2000 a 2500kg high quality organic fertilizer. It contains 11% of organic matter, 12% of organic matter, 0.45% of nitrogen, 0.19% of phosphorous oxide, 0.6% of potassium oxide, and is enough fertilizer for the fertilizer of whole year. These organic fertilizer is rich in nitrogen, phosphorus, potassium and other nutrients, with more than 6% content and more than 35% organic matter content, all of these is above national standard. Working Principle An organic fertilizer production line can not only meet the needs of local fertilizer, but also meet the needs of the surrounding market. Biological organic fertilizer is widely used in fields such as farmland, fruit trees, flowers, landscaping, high grade lawn, soil improvement and so on, which have a good effect. Our country subsidizes the agriculture, and it is very supportive of the industry, so investing in this industries is a good choice.

Compound fertilizer production line is widely applied to produce compound fertilizer and the capacity ranges from 5000-200,000 tons/year. It can granulate NPK, NP, ANP, DAP, MAP, CAN, SSP and other materials into compound fertilizer particles in one processing line. This equipment is specially used for manufacturing compound fertilizers with different concentrations and types, such as organic fertilizers, inorganic fertilizers, biological fertilizers and magnetic fertilizers, etc. It is mainly used for producing spherical particles with a diameter ranging from 1mm to 3mm. The compound fertilizer production line has less investment, quick results and good economic benefits. The whole equipment process is compact, scientific and advanced. Energy saving and consumption reducing, no waste removal, stable operation, reliable running, convenient maintenance. The adaptability of raw materials is wide, and the machine is suitable for the granulation of compound fertilizer, medicine, chemical industry, feed, etc., and the granulation rate is high. This production line can produce various compound fertilizer with different concentration and different types (including organic fertilizer, inorganic fertilizer, biological fertilizer, magnetic fertilizer, etc.). In particular, the granule for tombarthite and ammonium carbide compound fertilizer fills the domestic void and lead the country.  

Use of solid-liquid separator It is widely used in the separation of slag-liquid of high concentration organic sewage such as animal manure wine tank dregs starch residue sauce residue of various intensified farms which raise pigs chickens cattle and horses. Characteristics of inclined screen solid-liquid separator(1) It has the functions of sorting and filtering large & heavy materials first and integrates transmission pressing dewatering and sand removal which solves the problems of garbage winding equipment and closed operation.(2) The separation rate of floating suspended matter and sediment in manure can reach more than 95% and the solid content of slag can reach more than 35%.(3) It has automatic liquid level control function which saves more than 50% of electricity consumption and lows operating cost compared to similar equipment.(4) The contact part between the equipment and the treatment medium is made of high-quality stainless steel and is acid-passed and passivated. The corrosion resistance is several times stronger than that of ordinary stainless steel which prolongs the service life. Advantages of inclined screen solid-liquid separator(1) Oblique sieve separator is suitable for solid-liquid separation of low concentration sewage.(2) The inclined sieve type solid-liquid separator requires the moisture content of the material to be more than 90% and the solid content of the material is 0.3mm or more.(3) High processing capacity less solid-liquid loss and the solid content of wastewater after treatment can be less than 1% easy to operate.(4) less investment and small installation area. Application of inclined screen solid-liquid separator(1) Biogas power generation heating.(2) Fertilization of Vegetables farmland fruit trees and forest. It can also be raw materials for organic fertilizer.(3) Sold to organic fertilizer plant as organic fertilizer raw material or self-made organic fertilizer.

This machine can be used to separate water from excrements of livestocks, draff, biogas residue and slurry, kitchen waste, etc. Excrements of livestocks are collected into a collection pond, in which there is a mixer machine that can mix all the excrements continuously. Then, the mixed excrements of livestocks will be lifted to solid-liquid separator machine by clog-free pump. After processing, solid matters drop on the solid material pile that is under solid-liquid separator machine, and the liquid will be drained away to the desilter. After subsiding and composting, the obtained liquid can be diluted as irrigation water. The obtained solid matter contains little water, so it is easy o be transported. It can be used to produce bio-fertilizer or be sold as fertilizer material. Practicability:This kind of machine is high-efficiency. After being processed in the solid-liquid separator machine, the moisture content of solid residue is between 30-45% . The output amount and moisture content can be adjusted. This machine applies to different raw materials that need to be separated. Solid matter is convenient to be transported and it is a good raw material for making fish fodder and bio-fertilizer. Maintenance:In general, the screen of this machine should be cleaned every shift. When cleaning, you should take down the roof cover of the shell, and the you can use water torch to clean stemming.

Automatic quantitative packing scale is designed for quantitative packing, which is divided into double bucket packing scale and single bucket packing scale. Double bucket packing scale adopts integrated design and has correct height, compact structure, efficient energy saving, novel appearance, easy installation and convenient maintenance. The quantitative accuracy of the system is two thousandths. Performance Features: Packing speed is fast. High measurement accuracy. High reliability: the main components of the control system use imported products, and the instrument uses Japanese technology; The mechanical structure is reasonable: the system is maintenance-free and the material is easily adaptable. Good after-sales service: stable technical service staff; 24/7 after-sales service hotline; provide enough spare parts and timely and perfect technical services. The material of the contact part is anti-corrosion material. Working principle The main motor adopts different feed speed: fast, medium, slow and special feed agitate the structure. Advanced digital frequency conversion control technology; sample processing technology; anti-jamming technology; implementation of automatic compensation and correction.

This machine is a new generation of rotary drum granulator developed by our company staff according to construction experience. The machine has the features of beautiful appearance, simple operation, low energy consumption, long service life, uniform drying and convenient maintenance, etc., which is the most advanced granulating equipment in China. The product is suitable for large-scale production of cold, hot granule and high, medium and low concentration of compound fertilizer. Characteristics of Performance Innovate technology, and improved structure; the tube uses special rubber sheet lining or acid resistant stainless steel liner, realizing automatic removal of scar, deoma. High wear resistance, convenient maintenance, high ball strength, good appearance, corrosion resistance, wear resistance, low energy consumption, long service life, convenient operation and maintenance。 Reasonable layout, advanced technology, small power, no three wastes discharge, stable operation, convenient maintenance. High balling rate; the drying efficiency is high; the balling rate can reach 70%; there is a small amount of returning material, the size of returning material is small and can be regranulated. Steam heating to raise the material temperature. Working Principle Electromotor drive the belt and pulley, then it is transmitted to the driving shaft by the speed reducer; by installing the open gear on the drive shaft, the open gear is fitted with the large toothed ring that is fixed on the body, achieving the working in the same direction. The material is added from the feed end and is inside the tube. The function of the special structure inside the tube is granulation, finally out of the outlet. Because of the continuous entry of materials, the continuous rotation of the granulator can achieve mass production.

The pan of disc fertilizer granulator adopts the integral circular arc structure, and the granulation rate can reach more than 93 %. The granulation plate has three feeding holes, which is convenient for the production of intermittent production, greatly reducing the labor intensity and improving the labor efficiency. The speed reducer and motor adopt the flexible belt transmission, starting smoothly, slowing the impact force, and improving the service life of the equipment. The plates are reinforced with a number of radiant steel plates, which are durable and never deformed. Anabatic, thicken and strong base design makes the machine doesn’t need the anchor bolts, and the operation is stable. The main gear of granulator adopts high frequency quenching, and its service life is doubled. There is high strength fiberglass in the granulation pan making the machine durable. The machine has the advantages of uniform granulation, high granulation rate, stable operation, durable equipment and long service life, which is an ideal equipment for users. Characteristics of Performance High efficiency. Long service life. The plates are reinforced with a number of radiant steel plates, which are durable and never deformed. The main gear of granulator adopts high frequency quenching technology, and its service life is doubled. There is high strength fiberglass in the granulation pan making the machine durable. Uniform granulation, high granulation rate, stable operation, durable equipment and long service life. Working Principle By adding water raw material powder can mix evenly, then being transported into the disk; as the rotation of disc, material inside gradually formed globular by rolling; After achieving the predetermined diameter, the granulation will be out of the pan to the next procedure again.

The newly developed organic fertilizer granulator from Zhengzhou Shunxin Engineering Equipment Co., Ltd. is a molding machine which can make the material into a specific shape. The new type organic fertilizer granulator uses high speed rotating mechanical shearing force and the resulting air power, making continuous implementation of the fine powder material in the machine mixing, granulating, spheroidizing, density and other processes, which achieves the goal of the granulation. The granulation method makes the pellet rate higher, and the granule is more beautiful, while saving energy and improving efficiency. Characteristics of Performance The principle is simple, and the granulation speed is fast; using high speed rotating mechanical shearing force and the resulting air power makes continuous implementation of the fine powder material in the machine mixing, granulating, spheroidizing, density and other processes. The granule quality is high and the machine is especially suitable for granulation of light powder materials. Finer particles of fine powder, higher sphericity of granules, and higher pellets quality. No bond is required; using the particles of organic matter to be interbred with each other under certain forces, so no bond is needed for granulation. Wide source of materials, including livestock and poultry manure, compost fertilizer, sea fertilizer, cake fertilizer, etc. Working Principle The new type organic fertilizer granulator uses high speed rotating mechanical shearing force and the resulting air power, making continuous implementation of the fine powder material in the machine mixing, granulating, spheroidizing, density and other processes, which achieves the goal of the granulation. The granulation method makes the pellet rate higher, and the granule is more beautiful, while saving energy and improving efficiency.

Product Introduction The double roller extrusion granulator is the key equipment of compound fertilizer granulation and has the characteristics of advanced technology, reasonable design, compact structure, novelty and utility and low energy consumption; it is equipped with corresponding equipment, which can form a small production line, thus forming the continuous production of certain production capacity and mechanization production. The machine adopts the eugenic formula without drying and produce fertilizer by normal temperature; the product once rolled and formed, meeting the requirements of technical specifications of compound fertilizer. Therefore, it is the upgraded machine for the production of high, medium and low concentration special compound fertilizer and the renewable energy consumption of the compound fertilizer industry. Characteristics of Performance Less investment, quick results, good economic benefits. The roller extrusion granulator can produce fertilizer by normal temperature without no more drying technology, pellets formed only once extrusion. Reliable operation and low cost. The machine’s power is small, and operation is reliable; it has no three waste discharge, the operation is stable, and the maintenance is convenient. The raw materials have wide applicability. It can be used for the granulation of various raw material, like compound fertilizer, medicine, chemical industry, feed, coal, metallurgy. The roller extrusion granulator can be used for the granulation of earth, carbon ammonium and ammonium sulfate compound fertilizer, filling the domestic blank. Working Principle This series of roller granulation is extruded model, and its working principle is: Electromotor drive the belt and pulley, then it is transmitted to the driving shaft by the speed reducer, and by synchronizing the open gear with the passive shaft, achieving the working in the same direction. Material is added from the hopper, after the roll extrusion forming, demoulding pelletizing; and through a chain, the balls are transferred to the broken screen studio, sieving and isolate the finished products (the balls), then return to mix with new materials and granulate again.

The bio liquid fertilizer production line adopts the chelation and complexation process of biogas liquid, amino acid, humic acid, macronutrient, secondary nutrient, micronutrient. And it has a whole strict operation process and systematic management methods. The fertilization operation can almost eliminate labor, which greatly saves labor costs. More and more soil and fertilizer experts, agricultural technology extension experts, agricultural material distributors and farmers have realized the importance of bio liquid fertilizers. Advantages Compared with traditional superphosphate, granulated compound fertilizer and other kinds of fertilizer, bio liquid fertilizer has obvious advantages. It is a quick-acting fertilizer with the advantages of good water solubility and no residues. It can be completely dissolved in water and it can also be directly absorbed and utilized by the roots and leaves of crops. It realizes the integration of water and fertilizer that the water and fertilizer are used at the same time. Its rate of effective absorption is more than double that of ordinary fertilizers, which can reach 80%-90%. And the fertilizer effect is fast, which can solve the nutritional needs of high-yield crops during the rapid growth period. With the help of drip irrigation system, the water requirement is only 30% of ordinary fertilizer.The fertilization operation can almost eliminate labor, which greatly saves labor costs. More and more soil and fertilizer experts, agricultural technology extension experts, agricultural material distributors and farmers have realized the importance of bio liquid fertilizers. Suitable raw materials Biogas liquid, waste water from livestock and poultry, pharmaceutical processing waste, amino acid waste, macronutrient, secondary nutrient, micronutrient,etc.

The fermentation cylinder can be used to dispose organic wastes such as pig manure, chicken manure, cow dung, goat dung, mushroom residue, medium slag, crop straw, etc. The process of harmless treatment can be completed within 10 hours, and the floor area is small (The fermentation machine covers only 10 to 30 square meters); no pollution (closed fermentation); completely kill disease(temperature can be adjusted to 80-100 ℃). Therefore, it is the best choice for the utilization of waste resources in the recycling of agricultural enterprises, circular agriculture and eco-agriculture. In addition, we can customize the fermentation tanks of different capacities according to the customer’s requirements. Characteristics of Performance On-line CIP cleaning and SIP sterilization(121°C/0.1MPa); According to the requirement of hygiene, the structure design is very humanized and easy to operate. The drive is stable and the noise is low. Suitable ratio between diameter and height; according to the need to customize the mixing device,so the energy saving, stirring, the fermentation effect is good. The inner tank has the surface polishing treatment (roughness Ra is less than 0.4 mm). Every outlet, mirror, manhole and so on. Working Principle Fermentation tank, a device used to ferment microorganisms in industry. Its main body is the main cylinder made of stainless steel plate, and the volume is 100 m3. The structure is rigid and reasonable. It can withstand steam sterilization and has certain operation flexibility. Minimizing the internal accessories as soon as possible (avoid dead corners), and materials and energy transfer performance is high. It can be adjusted to clean and reduce pollution, suitable for the production of a variety of products and reduce energy consumption.

Brief introduction The moving type compost turner adopts four wheel walking design, which can move forward, backward and turn freely, and it controlled driving by one person. During the operating process, the machine rides astride above the pre-piled strip fertilizer bases, and the rotary blades mounted on the shaft mix, fluffy and move the strip fertilizer bases along with the movement of the moving type compost turner, so that make the fertilizer bases forming into new strip stacks. Features It can effectively and evenly mix the viscous poultry manure with microbial preparation and straw powder, so that creates a better aerobic environment for material fermentation. The whole machine has the advantages of balanced power, low energy consumption and large output, which reduces the production cost of bio organic fertilizer. Working principle It uses the diesel engine as the power source, and the material is turned over by the rotary blades, and it only needs one driver to control the whole machine. Attentions 1.The width of the fertilizer piles can not exceed the width of the moving type compost turner.2.There should be a certain space left at the both ends of the fertilizer pile, which is convenient for the machine to change direction. The spacing between the fertilizer piles should be more than 1 meters.3.This machine can not be used as a walking vehicle or a heavy truck.4.The machine must work on the flat surface, and the ground must be cement floor.

Brief introduction: The groove type compost turner are also called as guide rail type compost turner, which is usually used in the fermentation and turning of the poultry manure, sludge and garbage, filter mud, sugar dregs cake, straw sawdust and other organic waste. It is widely used in the fermentation and compost job of organic fertilizer plant, compound fertilizer plant, sludge and waste treatment plant, garden spot, agaricus bisporus growing plant, etc,. Features: Automation control. Centralized control by the control cabinet, so that can realize the function of manual or automatic control. Solid and durable. The teeth are durable and has the ability of breaking and mixing the compost materials. The groove type compost turner is suitable for aerobic fermentation, and it can match with solar energy fermentation chamber, fermentation tank and transfer machine. Compact structure and advanced technology. The use of some beneficial microorganisms can promote the rapid decomposition of organic wastes such as livestock manure.

The wheel type fertilizer compost turner is a patent product of our company. It is suitable for large span fermenting & pile-turning of high depth of livestock manure, sludge waste, filter mud, dregs of slag cake, straw sawdust and other organic waste. It is widely used in fermentation & decomposing and dehydrating of organic fertilizer plant, compound fertilizer plant, sludge & waste plant, garden spot and agaricus bisporus plant. Performance characteristics High composting depth: the composting depth can achieve 1.5 meters to 3 meters. Large composting span: the largest composing span can achieve 30 meters width. Lower energy consumption: it uses unique efficient energy-saving transmission mechanism. Under the same quantity of work, the energy consumption is lowerd by 70% compared with traditional compost machine. No dead corners: it uses wheel disk to compost symmetrically, under the displacement of speed governing mobile car, there is no dead corners. High degree of automation:  it is equipped with full automation electrical apparatus control system. So there is no need human operation when it is working. Working principle Using this compost turner can fully perform its mixing function. Adding some adjuvant is necessary to meet the raw material’s requirement of water content & ph value, this machine can help stir and mix them thoroughly. It can also improve the permeablity of the materials, and make the materials fluffy and elastic. At the same time, it absorbs large quantity of air and raises the temperature of fertilizer heap. If the temperature is over high, it can lower the temperature by reabsorbing fresh air, thus forming alternate state of medium-high temperature, which is beneficial to growth and reproduction of microbial flora.

This compost turner machine eliminates the hydraulic steering wheel type stacker. It is a new product owned exclusively by our company in the market. It fills the market gap that the large wheeled compost turner machines can not turn around in situ. No steering wheel required, the driver simply control two bars, then the machine can turn left or right, brake and 180 degrees turn around. Hydraulic balance of steering wheel. The height of the compost turner shaft can be automatically raised and lowered. The fertilizer pile can be forcibly turned or turned at high speed according to the moisture degree of the material. This product adopts soft start turning clutch (domestic similar products are used for iron to iron hard clutch, which will cause serious damage to chain, bearings and shaft). Equipped with front hydraulic push plate, no manual taking time to heap raw materials, drum hydraulic lifting, which greatly save the space, time, diesel, manpower and shorten the fermentation period.

I am Steven lee from Huijielong (Qingdao) International. We make and export high and low Density centrifugal cleaner, and dewatering elements for paper and pulp making machine. Our Factory Shendong Beichen is Located in Zibo, the Famous Industrial Ceramic City. Beichen is OEM partner of The main paper making machinery Supplier eg Voith, Kadant, Andritz at China and international Market. We supply you Good quality and competitive price of OEM parts to save production cost of paper mill if you have any inquiry or need , pls let me know . thanks

90mm16D/20D Rubber Extrude Machine： The extruder screw, barrel, steel sleeve, press roll, side roll and other machine body parts have reached the same processing standard of German extruder, and the accuracy level has reached the international leading level. SCREW Japanese material (SACM645): less deformation than domestic material, improve extrusion stability, and double the wear resistance of ordinary screw (38CrMoAL produced by Shanghai Baosteel) Phahse Motor(Italy)：The output speed and torque are constant within the rated speed, so the speed of the motor is more stable than that of the original AC asynchronous motor, and the rubber products are more stable and the qualified rate is improved. Because the synchronous servo motor uses the magnetic cylinder as the electric field, this characteristic makes the motor energy-saving 10-20% Feeding chamber and body Q345 low-carbon steel (good plasticity) machining center is used to form the fuselage in one body, punching type, high-pressure plug to block the water channel, with removable water channel cleaner, which has good water circulation effect. There are no welding points in the fuselage, no stress and deformation caused by welding, high processing accuracy, high coaxiality of fuselage assembly, reducing wear of screw steel sleeve, and prolonging service life of the equipment. Vacuum area is processed by 38CrMoAl with no welding joint, which can eliminate the stress and deformation caused by welding and improve the assembling: "coaxiality". The fuselage adopts spiral water circulation, the vacuum adopts perforation, and the high pressure plug closes the cycle. Compared with other brands of extruders, the fuselage assembly accuracy and the high temperature control ability are improved. Rossi Gearbox，Bearings are SKF brand, integrated casting box. Compared with domestic reducers, the transmission accuracy and efficiency are high, energy consumption is saved, noise is low, and service life is long.

Demanded product and brand

This Jar filling capping line is consist of a thick paste-filling machine and a vacuum capping machine which is specially used for sauces, jam, and paste products. such as chocolate spread, chili paste, peanut butter, honey, butter, mayonnaise, and ketchup... Technical parameter： Item: Piston pump filling machine Filling nozzle: 2-16 (customized based on production capacity) Filling system: Piston pump Filling range: 100-1000ml Filling speed: 500-6,000 jars /hour Filling precision: ±1% Power: 380V 50/60Hz, 2Kw Air pressure range: 0.6-0.8Mpa Weight: To be confirmed Machine size: To be confirmed

FOX Rear Shocks Suspension Kawasaki Brute Force 

1. Fourdrinier open headbox in paper making machine for sale is the key of paper machine,the function is supplying uniform and steady pulp flow to paper machine wire part. 2. The hydraulic headbox (hydraulic full-flow air-cushion combined headbox) is suitable for paper machine with a speed of 350-1500m/min and a speed of 1760-5500. The tube bundle enters the pulp stabilization chamber, and there is an attenuation chamber above the pulp stabilization chamber. It has an air cushion and spray device to eliminate air bubbles and reduce pressure pulses, and has an overflow outlet. The isobaric slurry flows from the stabilization chamber through the turbulence generator. Arrive at the upper weir plate of the convergence channel. 3. Air Cushion type headbox can increase the sizing pressure to meet the requirements of medium and high speed paper machines. The headbox consists of square taper tube device, evener roll device, top lip plate adjusting device, box body,control system, spraying device, air path system, etc.The headbox is designed with customer performance parameters, which can ensure work performance. 4. The Crescent paper machine adopts full stainless steel hydraulic headbox.The distributing bundle is combined with diffusion tubes.The diffusion tube bundle adopts the diffusion-finally section tube through the precise calculation, horizontal distribution and dispersion to the pulp which is from the inlet pipe so that the pulp has the uniform distribution effect and good dispersion characteristics, which guarantees the quality of tissue paper. Main Feature of head box: 1. Dedicated dilution water profile quantitative adjustment device can obtain better quantitative profile distribution;2. High turbulence turbulence generator and special flap design can achieve better paper evenness;3. Different designs are suitable for different vehicle speeds and paper types;4. The addition of controllable edge flow to obtain good fiber orientation;5. The upper lip plate adjustment mechanism of the structure can quickly and accurately adjust the quantification of the width;6. The quick box opening design is convenient for maintenance and cleaning.

Founded in 2016, CDI company mainly focus on providing the maintenance equipment, spare parts and technical service for global Steel, Cement, Oil&Gas;, Smelting&Refinery; and Power Plants. Main Products: Industrial Fan/Blower, Motor, Pump, Valve, Gear Reducer, Crusher, Screen, Feeder, Ball Mill, Conveyor Equipt, Rotary Kiln, Blasting Furnace and spare parts etc.

Painting and drying chamber with a heat-ventilation unit with a capacity of up to 24,000 m³ of air per hour and an economical Riello diesel burner with a thermal capacity of up to 260,000 kcal/hour. The chamber fully meets the requirements prevailing on the market and allows servicing cars of any class. The delivery set includes a heat-ventilation unit with 1 supply and 1 exhaust centrifugal turbofan; - stainless steel heat exchanger; - three-leaf entrance gates 3000x2600 mm; - door for staff 800x2000 mm; - diesel burner; - metal base H=300 mm; - floors with 2 rows of slats or a fully slatted floor, load-bearing capacity 500 kg/wheel; - 2 entrance ramps 2000 mm long; - combined ceiling and side lighting with LED panels; - Remote Control; - a set of air filters. Specifications: Cabin dimensions, mm 6900х4000х2650 Dimensions, mm 7000х5306х3400 (external) Air exchange, m³/h 20000 (with differential 820 Pa) Heat output of the burner, kcal/h max. 260000 Max. Temperature during drying, °C max. 80 Fan drive motor power, kW 2x5.5 Max. Power consumption, kW 13 Lighting power, W 864 Power supply, V/Hz 3 f. X 380V/50Hz

Distilling has a long and splendid history, in fact, it can be said to be gold! Evidence suggests that the Babylonians had a rough idea of ​​the distillation process more than 3,000 years ago, and they didn't keep it a secret. By the 1st century BC, ancient civilizations in China, Pakistan, and Europe were perfecting, including the ancient Romans. The science of distillation was further developed thanks to alchemy. This discipline is somewhere between science and mysticism and is entirely concerned with turning materials into gold. Advanced technology enabled the distillation of later spirits. The first book on distillation was published by the Germans in 1500, but at that time the process was used to make perfumes or medicines. Just 100 years later, the idea of ​​drinking for pleasure is starting to focus. However, in the 19th century, the modern form of distillation was born! Step 1: Get Your Equipment A still works on a still, which can be a pot still (the oldest type of still) or a column still. It's a complex machine with uprights extending all the way to the ceiling. The distiller is connected to the condenser (the vessel through which the cooling water passes), which is connected to the barrel to collect the finished distillate. Step 2: Clean the Still The still must be thoroughly cleaned before each distillation. After all, you don't want last-distilled dirt messing up your gin! Step 3: Add Alcohol and Botanicals There are many unique distillation techniques, often developed by stills after months and years of experimentation. But the basic principle remains the same: The still is first filled with vegetable alcohol and alkaline alcohol (also known as "neutral alcohol"). This spirit is a fermented alcohol, usually made from grains, with no added flavors. It is a mixture of water and pure alcohol. Step 4: Heat the heat source - some stills use an open flame, some use a stove or an electric heat source - to begin heating the bottom of the still. Alcohol starts to boil at 73 degrees Celsius, while water doesn't boil until 100 degrees Celsius. This means that the alcohol in the neutral spirit will gasify and start to rise, while most of the water will remain at the bottom of the still. Step 5: Cooling and Capture As a gas, alcohol travels up the distillation head, tank top, or distillation column. It then passes through a condenser filled with cold water, where it cools and turns back into a liquid. The final distillate drips into the barrel, where the still can decide whether to keep it or return it to the still for a second round of distillation into a more concentrated solution of water and alcohol. Contact us The wide range of models to meet the requirements of every market ensures that you can always find a solution that is right for you. If you would like to know more details about our equipment, please contact us. Contact us The wide range of models to meet the various requirements of every market ensures that you will always find a solution that is right for you. If you would like to know more details about our equipment, please contact us. Contact us The wide range of models to meet the requirements of every market ensures that you can always find a solution that is right for you. If you would like to know more details about our equipment, please contact us.

Conveyor belts are the most common type of conveying machines for conveying a continuous stream of granular (sand, cement), lumpy (crushed stone, gravel, etc.) And piece (bricks, blocks, tiles, etc.) Of the materials in the horizontal and inclined positions ... The power and dimensions of the manufactured conveyor depend on the application and operating conditions.

This equipment is designed for rapid preliminary dewatering and wet classification of predominantly small fractions (e.g. coal sludge, sand)

Inertial screens of heavy type are designed for mechanical sorting of bulk or lumpy ore materials by size. They are optimally suited for working with coal, ore, gravel, crushed stone with a size separation of 20 to 350 mm.

  Future Automotive Products, an ISO 9001:2015 Certified company, was founded in the year 2015 and has been involved in the Manufacturing and Supply of Press Sheet Metal Components, Electrical Parts, Auto Parts, Machinery Parts, Fire Extinguishers parts, Panels & General orders.   FAP is a professional Sheet Metal Small & Medium Pressed Components manufacturing company actively engaged in the manufacturing of Press tools, Aluminum Casting Dies, Gasket Cutting Dies & processing sheet metal components for the Automobile industry, Construction industry, Home appliances, Kitchen Accessories, etc, and supplying Quality Products like small & medium pressed sheet metal components, fabricated Components, Engine mountings, Precision turned components, aluminum sleeves for car Air conditioners, Chassis, Panels, Channels, Pressure die casting components etc at Competitive Prices.                                                                                                     

QVS manufactures standard & custom hydraulic repair seal kits, hydraulic seals, pneumatic seals, o-rings (including viton, silicone, and ptfe) and oil seals for industries worldwide. Our products are available in a variety of materials to meet both high & low temperature requirements.

  Caprolone production is based on the polymerization of lactam, known as aminocaproic acid, at a reduced temperature. The reaction is accelerated by the addition of alkaline catalysts and other activators. Corrosion does not threaten such sheets. No toxic substances were found in their structural basis. Products can come into contact with any food products without consequences. This fact is confirmed in the official conclusion of the SES. Polyamide-6 sheets are durable in operation and can easily withstand various loads. The material has a reduced coefficient of friction, due to which, in the process of using them as part of individual units, it is possible to refuse the use of lubricants. The main field of application of caprolon sheets is mechanical engineering. They are indispensable for renovation work. Sheets are operated at temperatures from –30 to + 90ºС. However, it should be borne in mind that they begin to melt already at 250 ° C. The main characteristics of the material: at break, the relative elongation reaches fifty percent; at a pressure of 90 units, the strength of the material is noticeably reduced. When the material is compressed and deformed by an average of 5%, the stress is 92 MPa. Rod and sheet caprolon is resistant to wear and shock loads, is not susceptible to the effects of corrosive media, and does not emit substances hazardous to health during operation and heating. Material Application: production of various parts for conveyors and machines; manufacture of dishes and products for the food industry; production of electrical and radio engineering parts; production of durable, corrosion-resistant self-lubricating bearings, as well as blades, gears and other parts for conveyors and pumps for various purposes A big plus of the material is that during operation as a part of units, it does not make a lot of noise and often does not require the use of additional lubrication. Our experts will professionally advise on the possibility of using caprolon in your equipment, select the optimal brand and size of the workpiece. In most cases, we can also help with the manufacture of finished products.

Caprolon bushings are more technologically advanced in comparison with the same items made of bronze and other metals. They do not degrade in an aggressive chemical environment, do not corrode, do not require special maintenance, damp shock loads during operation, and are suitable for use in the production and storage of food products. An important advantage of using bushings is the minimization of waste during processing. This gives an economic benefit both by reducing the costs for the material itself and for its processing. Polyamide products are cheaper than metal ones, but more durable and reliable. Our experts will professionally advise on the possibility of using caprolon in your equipment, select the optimal brand and size of the workpiece. In most cases, we can also help with the manufacture of finished products.