Roof Sandwich Panel - 42279

Soundproofing material for car based on foam rubber. In combination with vibration isolation, it gives the maximum result in improving the comfort of your car. It has a moisture-resistant adhesive base with increased adhesion! Does not absorb moisture, self-extinguishing. Additionally, it can be used in pipe insulation, for sound insulation of sewers, ventilation, metal baths, and refrigerators. Available in thickness 6 mm and 10 mm. Sheet size - 500x700 mm.   We deliver anywhere in the world.   For additional information about the terms of cooperation, please contact our contacts.

We offer you high-quality roofing felt - rolled roofing and waterproofing material obtained by impregnating roofing cardboard with petroleum bitumen and applying covering bitumen with filler and topping to both sides of the sheet. The product is designed to create the top protective layer of the roofing carpet and the lower layers of the roof. Euroroofing felt is also used as roll waterproofing of building elements. The material is attached to the base with bitumen or roofing mastics. ADVANTAGES OF RUBEROID - simple installation using bitumen mastics using hot or cold methods; - relatively low cost; - water resistance – complete tightness has been proven by practical tests: 72 hours, at a water pressure of 0.01 kgf/m2; - preservation of physical properties when heated to 80 degrees Celsius; - absence of swelling, delamination and loss of topping; - minimal load on rafters and roofing structures due to low weight; - versatility - the material is used not only as waterproofing, but also for wind and moisture protection of external walls; - wide selection of materials with different characteristics.

Equipment for the production of mineral wool, on the example of the basic model 30KA Automatic line for the production of high quality mineral wool from the manufacturer. The capacity of the recommended automatic lines varies from 8,000 tons to 60,000 tons of finished product per year or more. You can quickly contact a specialist to obtain the required information or send a request using the contact details provided on this portal. In addition to the standard supply of stone wool production equipment, the Company can provide a full range of services: from site selection, terrain layout, construction and building reference materials, equipment installation, commissioning, staff training, to the modernization of old stone (mineral) wool production lines. The cost and terms of delivery of a new automatic line for the production of stone wool, warranty obligations, as well as services for the maintenance or modernization of existing equipment are negotiated on an individual basis. At the same time, it should be borne in mind that the indicated cost is not decisive and in the process of discussing a commercial offer it can significantly (!) Change both up and down.

Пенополистирольные плиты (маты) для труб теплого пола с ламинацией это: высокая теплоизоляция, шумоизоляция, высокая плотность, прочность и конечно удобства. Благодаря специальным крючкам на выступах (бобышках) трубы крепко фиксируются а замки по бокам прочно держат плиты между собой. В нижней стороне плит имеется сложные формы (лабиринт) выполняющие функцию дополнительной шумоизоляции. При использовании плит монтажные работы ускоряются в 3 раза! Размеры: 1200×600×38 (0.72кв/м) Диаметр трубки: 16 Плотность: 30 кг/куб +-5% Теплоизоляция: 0.036 вт/к Коробка 0.65 м/куб Кол-во в коробке: 20 шт (14.4кв/м) Тип упаковки: гофра картон.

Expanded polystyrene plates (mats) for underfloor heating pipes are: high thermal insulation, sound insulation, high density, strength and of course convenience. Thanks to special protrusions (lugs), the pipes are firmly fixed and the locks on the sides firmly hold the plates together. On the underside of the slabs there are complex shapes (labyrinth) that perform the function of additional noise insulation. When using plates, installation work is accelerated by 3 times! Dimensions: 1200×600×38 (0.72 sq/m) Tube Diameter: 16 Density: 30kg/cube +-5% Heat Insulation: 0.036w/c Box 0.65m/cu.m. m) Type of packaging: corrugated corton.

Skate Aeruelon (Hare Figure Ribbon) LVK 240*5000 - from 400 rubles. for the pcs.; LVK 300*5000 - from 450 rubles. For pcs. The price is without VAT. Free delivery. We are looking for regional representatives.

Valve under-roof space aerator KRONOPLAST WPBF Under-roof space aerator KRONOPLAST WPBF is designed for installation on finished roofs made of VENICE metal tiles. A special bitumen-rubber compound provides waterproofing of the connection between the passage element and the roofing material. It is used for ventilation of the under-roof space / attic. It is mounted on roofs made of metal tiles with a wave height of up to 34 mm (profile type KRONA). Ventilation is necessary to remove excess warm and humid air. Ventilation reduces the likelihood of fungus and mold on roofing materials, which will extend their service life. The aerator is made from Austrian raw materials on German equipment. Primary plastic is used, which is resistant to UV radiation due to a special stabilizer in its composition. European quality, manufacturer's warranty. Material: polypropylene (PP) - stabilized to UV rays. Technical characteristics: * Diameter Ø150, Complete set: screws matching the color of the valve - 12 pcs For metal tiles with a VENICE profile COLORS: - graphite RAL 7024 - 3 Characteristics Main attributes Producer KRONO-PLAST Producer country Poland Diameter 150 mm component Roof valve (aerator) Color Gray User characteristics Delivery within the city 3 000 KZT

Valve under-roof space aerator KRONOPLAST WPBW Under-roof space aerator KRONOPLAST WPBW is designed for installation on finished roofs made of metal tiles. A special bitumen-rubber compound provides waterproofing of the connection between the passage element and the roofing material. It is used for ventilation of the under-roof space / attic. It is mounted on roofs made of metal tiles with a wave height of up to 34 mm (profile type KRONA). Ventilation is necessary to remove excess warm and humid air. Ventilation reduces the likelihood of fungus and mold on roofing materials, which will extend their service life. The aerator is made from Austrian raw materials on German equipment. Primary plastic is used, which is resistant to UV radiation due to a special stabilizer in its composition. European quality, manufacturer's warranty. Material: polypropylene (PP) - stabilized to UV rays. Specifications: * Diameter Ø150, Complete set: screws matching the color of the valve - 12 pcs For metal tiles with KRONA profile COLORS: - brown RAL 8017 - 1 Characteristics Main attributes Producer KRONO-PLAST Producer country Poland Diameter 150 mm component Roofing valve (aerator) Color Brown Custom characteristics Delivery within the city 3 000 KZT

* It is possible to produce in desired quantities, * Measuring is needed when getting a price; is heard.  * Color options available * The product can be packed in an exportable format to the whole world.(Disassembled.  * If needed; If necessary, mounting support can be given to the desired country. (Optional) * Average Manufacturing and Delivery Time to Customs is 30 days (may vary depending on product quantity and size)

* It is possible to produce in desired quantities, * Measuring is needed when getting a price; is heard.  * Color options available * The product can be packed in an exportable format to the whole world.(Disassembled.  * If needed; If necessary, mounting support can be given to the desired country. (Optional) * Average Manufacturing and Delivery Time to Customs is 30 days (may vary depending on product quantity and size)

* Lighting * Rain and Snow Water Drainage System * Rain and Wind Sensor; * It is possible to be produced in desired quantities, * Measuring is needed when getting a price; is heard. * Color options are available * The product can be packaged in a format that can be exported to the whole world. (Disassembled. * If needed, mounting support can be provided to the desired country. (Optional) * Average Manufacturing and Lifetime; Delivery time to the item is 30 days (it may vary depending on the product quantity and size)

* Lighting * Rain and Snow Water Drainage System * Rain and Wind Sensor * It is possible to produce in desired quantities, * Measurements are needed when buying a price. * Color options available * The product can be packaged in a format that can be exported to the whole world. (It is disassembled. * If needed, mounting support can be provided to the desired country. (Optional) * Average production and delivery time to Customs is 30 days (may vary according to product quantity and dimensions)