The company "VEKPROM" supplies drilling, chamfering, forging and pressing equipment and equipment for pipe processing. Over 15,000 units in stock.
Make a safe deal with this supplier.
Apply
ПГ ВЕКПРОМ, ООО
Russia
USD
326.28/pcs
The lightweight aluminum body and ergonomic soft grip provide superior performance and greater control during operation. The ADG.20A pneumatic grinder comes in a convenient carrying case, including a set of 10 burrs.
Characteristics
Length, mm
135
Engine speed, rpm
20,000
Operating pressure
6.3 bar / 90 PSI
Weight, gr
500
Air consumption, m3 / min
0.09
Pin grip, mm
6
ПГ ВЕКПРОМ, ООО
Russia
USD
434.87/pcs
Benefits:
Versatile when using rotary cutters with a diameter of 6 - 16 mm
Heavy-duty model made entirely of steel
Safety lever valve prevents unintentional start-up
Easy to use, ergonomic design
Reduced vibration thanks to rubber muffler
Insulated housing
Collet 6 mm and wrench set included
Shuttle feet for precise rotation
Be sure to lubricate with oil
Characteristics
Rotation frequency, rpm
25,000
Outlet
Ahead
Air consumption, m3 / min
0.57
Performance, Watt
370
Control
Safe grip
Flexible shaft
1/4 "BSP
Collet clamp, mm
6
Weight, kg
0.7
Replaceable motor
there is
ПГ ВЕКПРОМ, ООО
Russia
USD
347.67/pcs
Benefits: Versatile when using rotary cutters with a diameter of 6 - 16 mm Heavy-duty model made entirely of steel Safety lever valve prevents unintentional start-up Easy to use, ergonomic design Reduced vibration thanks to rubber muffler Insulated housing Supply air hose, 6 mm collet and wrench set included Shuttle feet for precise disc rotation Be sure to lubricate with oil Characteristics Rotation frequency, rpm 75000 Performance, Watt 110 Collet clamp, mm 3 Outlet Behind Control Rotation Weight, kg 0.15 Air consumption (m3 / min.) 0.2 Flexible shaft M8 Replaceable motor there is
ПГ ВЕКПРОМ, ООО
Russia
USD
599.44/pcs
The CG 2-150 D articulated copying machine is designed for cutting sheet metal of increased thickness up to 200 mm according to a prepared template. Equipped with a high power cutter. The design of the torch holder allows you to move it to the cutting zone along a toothed rack and turn the torch (where necessary) by an angle of up to 45º. Can also be supplied with oxy-acetylene cutting nozzles.
The rigid structure of the machine body, made of lightweight aluminum alloy, and the electronic speed control system, allow for very high quality parts. This equipment is an analogue of articulated cutting machines Fakel-Sh, Ogonyok, IK-84D (Koike, Japan).
ПГ ВЕКПРОМ, ООО
Russia
USD
1166.18/pcs
A welding carriage designed to move various types of oxyfuel torches. Provides high quality cutting and bevelling.
Benefits:
Cutting and bevelling at angles up to 45 degrees (operation with two torches is possible)
Quick-release torch holder (diameter 28 to 35 mm)
Advanced speed control with digital PID stabilizer
Liquid crystal display with indication of the set and current speed
Moving directly on the sheet or along the guide rails
Two-wheel drive with automatic braking system
Convenient movement to another position
Guides connected to the required length
Rigid and heat-resistant construction
A wide range of accessories significantly expanding the scope of application
Characteristics
Power parameters
230 V / 50-60 Hz
Power
15 watts
Clearance
7.5 mm
Travel mechanism
4 wheels, 2 driving. Four heat-resistant silicone wheels
Cutting speed
0 - 1,500 mm / min
Weight
16.8 kg
ПГ ВЕКПРОМ, ООО
Russia
USD
3051.69/pcs
The SNR KB cantilever machine is designed in the form of a longitudinal frame with a movable block, which includes a CNC, as well as a cross beam. The machine is designed for high-precision and accurate cutting of sheet metal. The machine is successfully used for small series and individual work. Cutting is carried out by thermal or plasma methods.
The machine memorizes the sequence of operations up to 10,000, has a built-in library of contours, is easy to operate, equipped with a 7-inch screen. Thanks to the tracking system for the position of the torch, the pattern will not be distorted even if the metal sheet or the console itself bend.
Characteristics
Model
SNR-KB-1220
SNR-KB-1530
SNR-KB-1565
Working area, mm
1200 x 2000
1500 x 3000
1500 x 6500
Supply voltage, V
220
frequency Hz
50
Power consumption, W
160
Effective processing area, mm
X - 1500, U - 3000
Positioning accuracy, mm
0.3
Cutting speed (for oxygen cutting), mm / min
0 - 1000
Cutting speed (for plasma cutting), mm / min
0 - 4000
No-load movement speed, mm / min
up to 8000
Cutting gas pressure
Max 0.1 MPa
Oxygen pressure
Max 1.5 MPa
Cut sheet thickness (for oxygen cutting), mm
6 - 150
Cut metal thickness (for plasma)
depends on the power of the plasma source, mm
0.1-50
Total weight of the machine, kg
150
Screen size
7 inches
ПГ ВЕКПРОМ, ООО
Russia
USD
207.51/pcs
The TR-40 profile bending machine is an entry-level universal pipe bender. It can be used to quickly bend low-profile and medium-profile steel, copper and aluminum pipes. This pipe bender is mobile, it can be used in garages, small workshops, on construction sites.
Benefits:
The ability to bend profile pipes in the range from 15x15 to 40x40 mm
The width of the profile on rollers is very convenient to adjust with a simple screwdriver
The upper shaft has the optimal length of the lever for compression for one roll
Characteristics
type of drive
manual
Execution
desktop
Bending diameter
450-600 mm
Max. profile section
40 x 40 mm
Dimensions (LxWxH)
55x28x40
Weight
21 kg
ПГ ВЕКПРОМ, ООО
Russia
USD
101.53/pcs
Manual profile bender YP-38 is designed for bending profiles and pipes at an angle of up to 200 degrees. Compact and easy to operate. The kit includes standard sets of molds for various sizes of workpieces.
Characteristics
type of drive
Manual
Max. profile section
50 x 6 mm
Dimensions (LxWxH)
26x26x88 cm
Weight
22.5 kg
ПГ ВЕКПРОМ, ООО
Russia
USD
269.77/pcs
PBS-8 is a universal scissor designed for processing sheet steel, steel plates, round and square steel bars, steel angle. Equipped with high quality cutting knives and a clamp. PBS-7 scissors are able to cut square rods up to 16x16 mm, as well as round rods up to 16 mm in diameter. The ideal solution for custom production and work on construction sites.
Characteristics
type of drive
Manual
Working length
250 mm
Metal thickness (400 N / mm2)
8.0 mm
Section of the cut strip
100 x 10 mm
Diameter of the bar to be cut
16 mm
Cut corner
40 x 6 mm
Dimensions (LxWxH)
97x39x67 (+175 lever) cm
Weight
42 kg
ПГ ВЕКПРОМ, ООО
Russia
USD
401.69/pcs
PBS-7 - çelik sac, çelik levha, yuvarlak ve kare çelik çubukların, çelik köşebentlerin işlenmesi için masif, üniversal makaslar. Yüksek kaliteli kesme bıçakları ve bir kelepçe ile donatılmıştır. PBS-7 makası, 60x7 kesitli köşeleri, 20x20'ye kadar kare çubukları ve 22 mm çapa kadar yuvarlak çubukları kesebilir. Özel üretim ve şantiyelerde çalışma için ideal çözüm.
Özellikler
sürücü türü
Manuel
Çalışma süresi
200 mm
Metal kalınlığı (400 N / mm2)
10 mm
Kesilen şerit bölümü
90 x 14 mm
Kesilecek çubuğun çapı
22 mm
Kesme köşesi
60 x 7 mm
Boyutlar (UxGxY)
68x31x56 (+125 kaldıraç) cm
ПГ ВЕКПРОМ, ООО
Russia
USD
266.8/pcs
The HN-3 angle punching machine is a hand-operated lever tool for punching right angles in sheet metal. A technological hole is provided at the base of the machine for removing waste from the cutting area. The low weight of the machine makes it easy to move it to any place convenient for work. The blades of the HN-3 machine are made of hardened, ground alloy steel and can be re-sharpened on a surface grinder.
Characteristics
type of drive
Manual
A type
Fixed
Metal thickness (400 N / mm2)
1.5 mm
Work zone
125x125 mm
Cutting angle
90 °
Dimensions (LxWxH)
47x39x44 cm
Weight
22 kg
ПГ ВЕКПРОМ, ООО
Russia
USD
2942.7/pcs
The LOCK FORMER machine is capable of working with sheet thickness up to 1.2 mm and has 9 pairs of forming rollers made of high quality hardened steel
With the optional roller set, the following seam types can be produced: Pittsburgh rebate and counterpart, reclining rebate, snap rebate and counterpart, and double vertical rebate
Roller kits are made of high quality steel, which significantly increases the service life
The machine runs silently
Characteristics
type of drive
Electric
Metal thickness (400 N / mm2), mm
1.2
Metal thickness (stainless steel 600 N / mm2), mm
0.7
Working speed, m / min
fifteen
Number of pairs of forming rollers, pcs
nine
Length mm
2200
Width, mm
660
Height, mm
1070
Weight, kg
350
Power supply, V / Hz
3x380 / 50
Power consumption, kW
3
About company
Categories: | Address: |
---|---|
Machinery, Industrial parts & tools, Industrial Equipments and Machines, Machine Tool Equipment and Parts, Metal Processing Machinery | Russia, Ермолаевский пер., д. 11 |
Contact supplier
Supplier:
"Узлегпром"
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message