Stera

Surface Preparation and Application Method: Dirty, dusty, swollen old painted surfaces should be cleaned and primed with Filled Primer or Polizolan. Using Filled Primer on newly plastered or plastered surfaces recommended. 2-3 hours after the primer application depending on the weather conditions between the coats. should be applied in at least two coats. Thinning / Mixing Ratio: It is diluted 25% by volume with water. Paintable (Coatable) Area Paintable (Coatable) Area: 13-15 m²/L on one floor. Drying Time: At 20°C, it provides touch dry in 15 minutes and dust holding dry in 30 minutes. Wait at least 4 hours between coats. It completes its hard drying in 4 hours. Recommended Practice

Surface Preparation and Application Method: Newly painted and old painted surfaces should be cleaned of dust and dirt, the required surface After repairs are made, a single coat of primer should be applied. 1/1 with water When thinned, it can be applied to eliminate problems related to insulation on the surface. Thinning / Mixing Ratio: Thinning is done according to the surface to be used. Label information must be followed. Paintable (Coated) Area: 60-100 m²/L depending on the absorbency of the surface when thinned at 1/7. Surface depending on its absorbency and application method. Drying Time: It completes its drying in 1 hour. Recommended Application Apparatus: Exterior, interior roller, satin roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be cleaned of any substance that will reduce adhesion. After the primer has dried (4 - 6 hours) top coat paint application is passed. Surface temperature at least 3 degrees above dew point should be high. It is necessary to wait 24 hours between coats in the final coat application. Application Temperature: Min +10°C / Max + 30°C. Thinning / Mixing Ratio: Single component / Water Addition 15 - 20% Paintable (Coated) Area: 5-6 m²/L or 3-4m²/kg (60-80 µ DFT) Drying Time: It dries to the touch in 20-30 minutes and completely dries in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be smooth, solid, dry and free from dust. It can be applied on all horizontal and vertical surfaces. Applying two coats as cross coats recommended. Wait at least 24 hours between coats. Thinning / Mixing Ratio: It is ready to use. Paintable (Coated) Area: 1KG 4-5 m²/kg in one coat. Drying Time: Touch dry at 20°C in 30 minutes, dust holding dry in 2-3 hours, hard completes its drying in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: The surfaces to be applied must be smooth, solid, dry and free from dust. It can be applied on all horizontal and vertical surfaces. Applying two coats as cross coats recommended. Wait at least 24 hours between coats. Thinning / Mixing Ratio: Thinning by Ground Paintable (Coatable) Area 8 - 10 m²/kg in one coat. Drying Time: Touch dry at 20°C in 30 minutes, dust holding dry in 2-3 hours, hard completes its drying in 24 hours. Recommended Application Apparatus: It is applied with a roller and brush.

Surface Preparation and Application Method: Dirty or loose textures on the first surfaces to be applied, also on old painted surfaces. Swelled or dusty parts should be cleaned and primed with Paint Primer. It is recommended to be applied as a single layer after the primer application. Thinning / Mixing Ratio: It is thinned by 20-30% by volume with water. Paintable (Coated) Area: 8-10 m²/L in one coat Drying Time: It completes its drying in 1-3 hours at 20°C and 50% relative humidity. Recommended Application Apparatus: It is applied with an interior roller and brush.

Surface Preparation and Application Method: Dirty, dusty, swollen and old painted surfaces should be scraped and cleaned thoroughly. Double It should be applied by waiting at least 2-3 hours between coats. During application ambient and surface temperature should be between 5-30°C. Thinning / Mixing Ratio: It is diluted 15-20% by volume with water. Paintable (Coatable) Area 5 - 7 m²/L on one floor. Drying Time: It completes its drying in 1-3 hours at 20°C and 50% relative humidity. Recommended Application Apparatus: It is applied with an interior roller and brush.

Surface Preparation and Application Method: Dirty, dusty, swollen old painted surfaces should be cleaned with Filled Primer. should be primed. Using Filled Primer on newly plastered or plastered surfaces recommended. After the primer application, depending on the weather conditions between the coats, at least 3 It should be applied in at least two coats by waiting for an hour. Thinning / Mixing Ratio: 15% by volume with water Paintable (Coated) Area: 11-13 m²/L in one coat Drying Time: Touch dry in 15 minutes, dust dry in 30 minutes at 20°C. completes its drying in 3 hours. Recommended Application Apparatus: Satin roller, interior roller and brush.

Surface Preparation and Application Method: Dirty, dusty, swollen old painted surfaces should be cleaned with Filled Primer. should be primed. Using Filled Primer on newly plastered or plastered surfaces recommended. After the primer application, depending on the weather conditions between the coats, at least 3 It should be applied in at least two coats by waiting for an hour. Thinning / Mixing Ratio: 15% by volume with water Paintable (Coated) Area: 11-13 m²/L in one coat Drying Time: Touch dry in 15 minutes, dust dry in 30 minutes at 20°C. completes its drying in 3 hours. Recommended Application Apparatus: Satin roller, interior roller and brush.

Surface Preparation and Application Method: The surfaces to be applied are smooth, sound, dry and dust-free. should be. Holes and cracks that need to be filled should be putty. Solvent based Transfer Primer is applied for old surfaces. Mineral based to be painted for the first time, Filled Primer is applied on raw plastered interior surfaces. On plastered surfaces; 1/7th Thinned Primer, 2 coats on the paint surfaces 18-24 hours after the primer application. should be applied. Thinning / Mixing Ratio: It is diluted 20-25% by volume with water. Paintable (Coated) Area: 7-9 m²/L in one coat Drying Time: Touch dry in 15 minutes at 20°C, 50% relative humidity, dust It completes non-stick drying in 30 minutes and hard-drying in 4 hours. Recommended Application Apparatus: It is applied with satin roller, interior roller or brush.

Surface Preparation and Application Method: Dirty or loose textures on the first surfaces to be applied, also on old painted surfaces. Swelled or dusty parts should be cleaned and primed with Silicone Primer. Liner 3 - 4 hours after the application depending on the air temperature between the coats. It is recommended to apply 2 coats. Thinning / Mixing Ratio: It is diluted 10-15% by volume with water. Paintable (Coatable) Area 8-10 m²/L in one coat. Drying Time: It completes its drying in 1 - 3 hours at 20°C, and its hard drying in 24 hours. Recommended Application Apparatus: Facade roller and brush.

Surface Preparation and Application Method: Dirty or loose textures on the first surfaces to be applied, also on old painted surfaces. Swelled or dusty parts should be cleaned and primed with Paint Primer. It is recommended to be applied as a single layer after the primer application. Thinning / Mixing Ratio: Ready to use; Optionally, it can be thinned with a maximum of 5% water. Paintable (Coated) Area: 8 - 10 m²/kg in one coat. Drying Time: It completes its drying in 1 - 3 hours at 20°C, and its hard drying in 24 hours. Recommended Application Apparatus: Exterior roller, coral roller and brush.