I-TECH Company LLP

Model: IPC3612LE-ADF28KC-WL Maximum resolution 2 Mpx Fixed lens 2.8 mm IR illuminator 30m range Built-in microphone and speaker Outdoor 2 Mp IP dome camera with Smart IR illumination up to 30 meters. Fixed lens: Image sensor: 1/2.8" CMOS, resolution 1920×1080:30fps Viewing angle: 106.7° Technology: WDR, Ultra 265/H.265/H.264/MJPEG Day/Night: Auto-switching IR cut filter (ICR ) White light, distance up to 30 m Integration: ONVIF, API Memory card slot: micro SD up to 128 GB Corridor mode 9:16 Built-in microphone and speaker Minimum illumination: Color 0.01 Lux (F2.0, AGC ON), with IR 0Lux Protection class: IP67, 4KV Operating temperature: -30°C to +60°C Power supply: 12V DC ± 25%, PoE Power consumption: 7 W Weight: 0.3 kg Material: Metal + plastic.

2 MP Outdoor Camera with Smart IR up to 30 meters and Wi-Fi IPC2122SR3-F40W-D Fixed Lens: 4.0mm, F2.0 Image Sensor: 1/2.7" CMOS, Resolution 1920x1080:20fps Viewing Angle: 86.5° Technology: DWDR 120dB, Ultra 265, H.265, H.264, MJPEG, Wi-fi Day/Night: Auto Switching IR Cut Filter (ICR) Integration: ONVIF, API Minimum Illumination: 0.02Lux, with IR 0Lux Protection Class: IP67 Temperature operating: -30°C to +60°C Power supply: 12V DC ± 25% Power consumption: 5.5 W Memory card slot: micro SD (256Gb) Weight: 0.25 kg IPC2122SR3-F40W-D Camera Sensor 1/2.7", 2.0 megapixel, progressive scan, CMOS Lens DORI Distance Lens Detect(m) Observe(m) Recognize(m) Identify(m) 4mm 60 24 12 6 Angle of view(H) 86.5° Angle of View (V) 44.1° Angle of View (O) 106.4° Shutter Auto/Manual, 1~1/100000 s Minimum Illumination Colour: 0.02 Lux (F2.0 AGC ON)0 Lux with IR on Day/Night IR-cut filter with auto switch (ICR) Digital noise reduction 2D/3D DNR S/N >52dB IR Range Up to 30m (98 ft) IR range Defog Digital Defog WDR DWDR Video Video Compression Ultra 265, H.265, H.264, MJPEG H.264 code profile Baseline profile, Main Profile Frame Rate Main Stream:2MP (1920×1080): Max . 20fps Sub Stream: 720P (1280×720): Max. 20 fps; Third Stream: 4CIF (704×576): Max. 20 fps HLC Supported BLC Supported OSD Up to 4 OSDs Privacy Mask Up to 4 areas ROI Up to 2 areas Motion Detection Up to 4 areas Storage Edge Storage Micro SD, up to 256 GB Network Storage ANR Network Protocols IPv4, IGMP, ICMP, ARP , TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP,QoS Compatible Integration ONVIF(Profile S, Profile G, Profile T), API Wi-Fi Wireless Standards IEEE802.11b/g/n Frequency Range 2.4 GHz ~ 2.4835 GHz Channel Bandwidth 20 MHz Support Modulation Mode 802.11b: CCK, QPSK, BPSK802.11g/n: OFDM/HT Security 64/128-bit WEP, WPA/WPA2, WPA -PSK/WPA2-PSK, WPS Transmit Power 802.11b: 17±1.5dBm style="box-sizing: border-box;" style="box-sizing: border-box;" />802.11n: 12.5±1.5dBm style="box-sizing: border-box;" /> Receive Sensitivity Transmission Rate 802.11b: 11Mbps802.11g: 54Mbps802.11n: up to 150Mbps H) 162.6 × 62.4 ×62.7 mm (6.4” × 2.5” × 2.5”) Weight 0.25 kg (0.55 lb) Working Environment -30°C ~ +60°C (-22°F ~ 140°F), Humidity: ≤ 95% RH(non-condensing) Ingress Protection IP67 Reset Button Supported

IPC2122LB-AF28WK-G IPC2122LB-AF40WK-G Camera Sensor 1/2.9", 2.0 megapixel, progressive scan, CMOS Minimum Illumination Colour: 0.01 Lux (F2.0 AGC ON)0 Lux with IR on Day/Night IR-cut filter with auto switch (ICR) Shutter Auto/Manual, 1~1/100000 s Adjustment Angle Pan: 0° to 360°, Tilt: 0° to 90°, Rotate: 0° to 360° S/N >52dB WDR DWDR Lens Lens Type 2.8mm and 4.0mm Fixed-focal Lens Mount M12 Angle of view(H) 101.1° 83.7° Angle of View (V) 55.0° 44.6° Angle of View (O) 111.0° 89.1° DORI DORI Distance Lens Detect(m) Observe(m) Recognize(m) Identify(m) 2.8mm 45.0 18.0 9.0 4.5 4.0mm 64.3 25.7 12.9 6.4 Illuminator IR Range Up to 30m (98 ft) IR range Wavelength 850nm IR On/Off Control Auto/Manual Video Video Compression Ultra 265, H.265, H.264, MJPEG H.264 code profile Baseline profile, Main profile, High profile Frame Rate Main Stream: 1080P (1920*1080), Max 30fps; 720P (1280*720), Max 30fps;Sub Stream: 720P (1280*720), Max 30fps; D1 (720*576), Max 30fps; 640*360,Max 30fps; 2CIF(704*288), Max 30fps; CIF(352*288), Max 30fps; Video Bit Rate 128 Kbps~6 Mbps OSD Up to 4 OSDs Privacy Mask Up to 4 areas ROI Up to 8 areas Motion Detection Up to 4 areas Image White Balance Auto/Outdoor/Fine Tune/Sodium Lamp/Locked/Auto2 Image Setting Image rotation, brightness, saturation, contrast, sharpness, gain adjustable by web browser Digital noise reduction 2D/3D DNR Smart IR Supported Flip Normal/Vertical/Horizontal/180° Dewarping N/A HLC Supported BLC Supported Defog Digital Defog Audio Audio Compression G.711 Suppression Supported Sampling Rate 8KHZ Storage Edge Storage Micro SD, up to 128GB Network Storage ANR,NAS(NFS) Network Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, RTMP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL/TLS, SNMP Compatible Integration ONVIF (Profile S, Profile G, Profile T), API , SDK Security Password protection, Strong password, HTTPS encryption, Export operation logs, Basic and digest authentication for RTSP, Digest authentication for HTTP, TLS 1.2, WSSE and digest authentication for ONVIF Client EZStationEZViewEZLive Web Browser Plug-in required live view: IE9+, Chrome 41 and below, Firefox 52 and below Plug-in free live view: Chorme 57.0+, Firefox 58.0+, Edge 16+ Wi-Fi Wireless Standards IEEE802.11b/g/n Frequency Range 2.4 GHz ~ 2.4835 GHz Wireless Range Up to 130 m (The performance varies based on actual environment) Channel Bandwidth 20 MHz Support Modulation Mode 802.11b: CCK, QPSK, BPSK802.11g/n: OFDM/HT Security 64/128-bit WEP, WPA-PSK/WPA2-PSK Transmit Power 802.11b: 17±1.5dBm style="box-sizing: border-box;" style="box-sizing: border-box;" />802.11n: 12.5±1.5dBm Receive Sensitivity Transmission Rate 802.11b: 11Mbps802.11g: 54Mbps802.11n: up to 150Mbps Interface Network 1 * RJ45 10M/100M Base-TX Ethernet Built-in Mic Supported Certification EMC FCC: FCC Part 15 Safety CE: EN 60950-1UL: UL60950-1IEC 60950-1 General Power DC 12V±25% Power consumption: Max 4.0 W Power Interface Ø 5.5mm coaxial power plug Dimensions (L × W × H) 172 × 76 ×72 mm (6.8” × 3” × 2.8”) Weight 0.25 kg (0.55 lb) Material Graphene + Plastic Working Environment -30°C ~ +60°C (-22°F ~ 140°F), Humidity:≤95% RH(non-condensing) Strorage Environment -30°C ~ +60°C (-22°F ~ 140°F), Humidity:≤95% RH(non-condensing) Surge Protection 4KV Reset Button Supported Ingress Protection Ingression protection: IP67

Cubic 2 MP video camera with Smart IR illumination up to 10 meters and Wi-fi support. Fixed lens: 2.8mm, F2.0 Image sensor: 1/2.7" CMOS, resolution 1920x1080:30fps Viewing angle: 100° Technology: DWDR 120dB, Ultra 265, H.265, H.264, MJPEG, Wi-fi Day/Night : Auto-switching IR filter (ICR) Minimum illumination: 0.02Lux, c IR 0Lux Built-in microphone and speaker Operating temperature: -10°C to +40°C Power supply: 5V DC ± 10% Power consumption: 2.3W Card slot Memory: micro SD (256Gb) Weight: 0.14 kg

The biometric identification terminal Uface 8T-H Temp is a model with a built-in high-precision non-contact thermal module of a new class - a thermal imaging camera. An important function of the model is the ability to determine the presence of a protective medical mask on a person's face. Uface 8T-H Temp is a high-end face recognition device with maximum human flow processing speed and reliability, which uses a deep learning algorithm. The device has an integrated thermal module, which provides stable and accurate non-contact temperature measurement in the forehead area of ​​a person. Functional features: Built-in Mifare card reader, Active backlight with motion detection, Fully autonomous operation, 8-inch IPS touch screen, Built-in database up to 100 thousand faces, Recognition accuracy 99.99%, Recognition speed less than 1 sec., Class IP65 protection, Wi-Fi, Built-in non-contact thermometer with ±0.5℃ accuracy, Temperature range 30~45℃.

Anviz T50 is a compact and convenient next-generation biometric access control system that implements user identification by fingerprint and password. Equipped with a high performance TI 300 MHz DSP processor, and as a result, high speed fingerprint identification. Anviz T50 has the most compact design in its class . The system has an LCD display, a keypad and a sensitive optical fingerprint reader. Device control via RS485 or TCP/IP (Ethernet) .Direct lock control (built-in relay) .The case is made of high impact industrial plastic .Ideal value for money Processor 32-bit ARM MCU BioNANO V10 algorithm AFOS300 Optical Sensor fingerprint scanner Scanning area 22mm* 18mm Resolution 500 DPI Display black and white LCD, blue backlight Number of prints in the device memory 1,000 Event log capacity 50,000 Anviz T5S remote (slave) fingerprint reader connection yes Identification method Fingerprint, ID+Fingerprint, ID+Password Recognition time <0.5 sec False Access Denial Probability 0.001% False Access Probability 0.00001% Interfaces RS485, Mini USB, TCP/IP (Ethernet), Wiegand Output Relay (dry contacts) yes Door open sensor yes Power supply 12V Size 74mm* 144mm*40mm Temperature range -10℃~ 40℃ Body material Wear-resistant industrial plastic

Anviz M5 is the only professional anti-vandal biometric access control system (ACS) based on fingerprints and contactless RFID cards in the line. The system can be used both for outdoor and indoor installation. The terminal case is made of metal and high-strength, wear-resistant industrial plastic. Degree of protection - IP65 (Ingress Protection 65), i.е. Full protection against dust and protection against water jets in any direction. Thus, when buying it, you can be sure that Anviz M5 will not let you down, even in extremely adverse conditions. It should be especially noted that the body of the terminal has a degree of protection IK10 - protection against impacts and acts of vandalism. The terminal is equipped with a Wiegand interface for connection with the included Anviz SC011 controller to enhance the security level of an existing ACS. Terminal management, as well as adding/removing users, can be implemented both on the device itself and remotely (via TCP/IP). It is possible to connect a remote (slave) fingerprint reader and contactless cards Anviz T5S Processor TI Stellaris® 32-Bit High Speed ​​CPU BioNANO V10 algorithm Finger scanner AFOS307 Optical Sensor Scanning area 22mm * 18mm Resolution 500 DPI Number of prints in the device's memory 2,000 Capacity event log 100,000 Identification method Fingerprint, Card, Fingerprint+Card Identification time < 0.5 sec False rejection probability 0.001% False acceptance probability 0.00001% Interfaces RS485, TCP/IP, Wiegand Remote fingerprint and RFID connection Anviz T5S card reader yes EM-Marine card reader 125 kHz (standard) Wiegand output Fingerprint pattern auto-update yes Protection rating IP65; IK10 Door open sensor yes Power supply, V 12 V Current consumption, mA 100-150 mA Direct control of the lock yes Alarm, when opening the case yes Energy saving mode yes Material Metal and wear-resistant industrial plastic

The Uface 5 compact wall-mounted biometric identification terminal will allow you to manage personnel access through authorized doors based on a specific schedule and, if necessary, two-factor identification. Face identification, in combination with door servomotors, will help organize contactless access of personnel to warehouse and production facilities, even when people's hands are busy or dirty. If necessary, it is possible to implement two-factor authorization using a face and an RF card. A deep learning algorithm allows you to quickly and accurately identify personnel by face, and a built-in backlight with a motion sensor will allow you to install the terminal even in darkened rooms. 50,000 users, 1 million records, dual-core high-speed ARM Cortex processor, 5-inch full-view IPS LCD touchscreen, 1080*800 resolution, WDR camera with progressive scan CMOS camera, TCP/IP, Wiegand output, relay Output, RS485, RJ45, Linux OS, Dual Camera Live Body Detection System, Wifi, Card, IK07, IP54 Built-in Mifare Card Reader Face Recognition: up to 5 at the same time Power supply 12V 2A 0℃～45℃ Size 190mm*87.5mm*17 mm.

The Anviz D200 Standalone Biometric Attendance System is an ideal, cost-effective solution for small and medium-sized companies. Exquisite design, ergonomic and compact (the thinnest in its class). Intuitive Russified interface, voice prompts. Put it on the table or mount it on the wall and the device is ready to go. To upload data, simply plug it into your computer's USB. No installation required (detected as a USB drive). Fully autonomous terminal, due to the integrated high-capacity LiIon battery. Anviz D200 is an easy, reliable and convenient solution to employee attendance problems in your company. Anviz D200 desktop terminal is one of the most successful and reliable employee time tracking systems developed by Anviz. Ideal solution for small companies. It features an elegant design and is the thinnest device in its class. No installation required at all. Simply place the terminal on a table or mount it on a wall! At any time, you can view the information of the arrival and departure of employees. Simply connect the Anviz D200 via USB to your computer, upload the data to the attendance software and get the reports you need. You don't even have to install drivers - the system will work like an ordinary USB drive. Anviz D200 with built-in battery is a universal and simple solution to your company's employee attendance problems! AFOS307 Optical Sensor Reader Identification Methods Fingerprint, ID+Fingerprint, ID+Password, Fingerprint+Password Display 128*64 blue LCD Reading time < 0.4 sec False rejection rate 0.001% False acceptance rate 0.00001% Number of stored fingerprints 2 000 Number of records stored 5 0000 Interface USB, TCP/IP Power supply DC 5V; 0.2A-0.3A Battery 1100 mA (≈ 6 hours standby) Temperature / Humidity -10°C to 40°C / 20% to 80% Size 157mm x 119mm x 35mm Case material ABS industrial plastic

Office Optical USB Fingerprint Scanner. The U Bio Reader uses a shatterproof, durable, ruggedized fingerprint scanner that is resistant to adverse operating conditions (water, dirt, scratches). Used for remote registration of new ACS users. Allows you to register new employees on the computer, and then send fingerprint templates to the access control and management system. USB interface. Fingerprinting in less than 0.4 seconds Desktop biometric USB fingerprint reader for scanning fingerprints in Anviz applications and security systems. Housing made of wear-resistant industrial plastic. Scanning area 22x18mm, resolution 500 DPI. Interface - mini USB (replaceable cable). Power supply 5V via USB. Options - SDK with template building and recognition functions. Material Plastic Country of origin USA Manufacturer Anviz Application Indoor Form factor Portable Color Black

C2 Pro is a high performance access control and time attendance terminal designed for the mid to high end market segments. Powered by an efficient 1GHz dual-core processor, the C2 Pro delivers the fastest performance, completing comparisons in less than 0.5 seconds. The user-friendly interface and 3.5" TFT display make it easy to operate the terminal. Multiple RFID readers (HID, ALLEGION or ANVIZ) can be used, as well as communication via TCP/IP or WiFi depending on the requirements. C2 Pro software is based on the operating system Linux system, and includes development packages (SDK and EDK) to customize the system for a specific customer.The terminal includes a relay for calling and communicating with an access control system, as well as an RS232 port for a printer.This allows you to meet the requirements of users for such systems Humidity 0% to 90% Verification mode Fingerprint (1:N, 1:1), password, card Number of fingerprints 5000 (1:N), 200000 (1:1) Number of event log entries 100000 HID Prox Card iClass Card Yes Allegion Card Yes RFID system 125KHz EM 13.56MHz Mifare(default)/DesFire/ISO 14443A(optional) WiFi Yes TCP/IP Yes Relay Yes Internet server Yes Power supply 5…12V DC, 1A Ha barite dimensions 140х190х32 Certificates CE, FCC, RoHS

The Anviz D100 biometric system has been discontinued and has been replaced by the Anviz D200 device. A system for monitoring and recording working hours for small and medium-sized companies. Processor 32-bit ARM MCU. Optical sensor AF0S300, 500 DPI Display 128*64. 1000 employees, 2000 fingerprints, 50000 events. Modes: fingerprint, login+fingerprint, login+password, fingerprint+password. Identification time less than 0.5 seconds. USB, 16 customizable views and schedules. Dimensions 160(W)*130(H)*90(D)mm. Working temp -10℃~40℃. Power supply DC 5V or USB. Number of users 1000 people Country of manufacture USA Manufacturer Anviz Warranty period 12 months Color Black Supply voltage 12 V