I-TECH Company LLP

Fingerprint protection system (WM-5000X1) Remove 200 groups of fingerprints Alibaba 200 groups of alarm clock Task tips  900 Call voice alert Wireless software free Software advantages ● Pedometer You can check the number of steps of patrol officers in the patrol report. patrol situations.● Fingerprint function (for X1 and X1-BLE) After this function is enabled, the patrol officer must check the fingerprint before reading the card. After successful verification, the worker can read the map within 15 seconds. ● Multiple computers working together (JWM Cloud Software only) You can also check the patrol report in time when you are not in the company. Consists of: 1 piece RFID wand reader with fingerprint authentication, flashlight 1 pc. USB cable5 pcs. 125 kHz RFID checkpoints 2 pcs. Personnel LabelsFingerprint FunctionFor X1 and X1-BLE, you can enable fingerprint verification to prevent patrol officers from looking for someone else to patrol. Task PromptSet the voice reminder in the software and upload the voice pack to the checkpoints. After reading, a voice packet will be played. Ohter function● Alarm clock: up to 200 sets. Emergency alarm: 1, 2 and 3 meters can be set. The patrol reader that falls from a certain height will send alarm data to the software.● Pedometer: The patrol reader will automatically track the number of steps while patrolling.● Voice prompt: Each step of the device will have a corresponding voice prompt.● Fingerprint: up to 200 sets. Read checkpoints within 15 seconds after confirmation.● Task hint: up to 200 sets. After reading, a voice packet will be played. ● Temperature: The screen can display degrees Fahrenheit or Celsius. Size 160mm × 50mm × 34mm Weight 314g IP Rating IP67 RFID Reading Mode 125KHz Reading Distance 3cm - 5cm Communication Pogo pin USB (Drive-Free), 15000 downloads/min Operating Temperature -40℃~+85 ℃ Battery 3.7V/2000mAh rechargeable lithium batteries Battery life 1. Read 500 records per day, turn on the flashlight for 2 hours, use 9 days. 2. Read 500 posts a day for 45 days. 16 days after low power. 3. After low power for 16 days of use. Storage capacity 16Mb flash, 60,000 pieces Fast vibration + OLED display + voice Tag identification number 10-bit hexadecimal in the reader (5 bytes).

Fingerprint protection system (WM-5000X1) Remove 200 groups of fingerprints Alibaba 200 groups of alarm clock Task tips  900 Call voice alert Wireless software free Software advantages ● Pedometer You can check the number of steps of patrol officers in the patrol report. patrol situations.● Fingerprint function (for X1 and X1-BLE) After this function is enabled, the patrol officer must check the fingerprint before reading the card. After successful verification, the worker can read the map within 15 seconds. ● Multiple computers working together (JWM Cloud Software only) You can also check the patrol report in time when you are not in the company. Consists of: 1 piece RFID wand reader with fingerprint authentication, flashlight 1 pc. USB cable5 pcs. 125 kHz RFID checkpoints 2 pcs. Personnel LabelsFingerprint FunctionFor X1 and X1-BLE, you can enable fingerprint verification to prevent patrol officers from looking for someone else to patrol. Task PromptSet the voice reminder in the software and upload the voice pack to the checkpoints. After reading, a voice packet will be played. Ohter function● Alarm clock: up to 200 sets. Emergency alarm: 1, 2 and 3 meters can be set. The patrol reader that falls from a certain height will send alarm data to the software.● Pedometer: The patrol reader will automatically track the number of steps while patrolling.● Voice prompt: Each step of the device will have a corresponding voice prompt.● Fingerprint: up to 200 sets. Read checkpoints within 15 seconds after confirmation.● Task hint: up to 200 sets. After reading, a voice packet will be played. ● Temperature: The screen can display degrees Fahrenheit or Celsius. Size 160mm × 50mm × 34mm Weight 314g IP Rating IP67 RFID Reading Mode 125KHz Reading Distance 3cm - 5cm Communication Pogo pin USB (Drive-Free), 15000 downloads/min Operating Temperature -40℃~+85 ℃ Battery 3.7V/2000mAh rechargeable lithium batteries Battery life 1. Read 500 records per day, turn on the flashlight for 2 hours, use 9 days. 2. Read 500 posts a day for 45 days. 16 days after low power. 3. After low power for 16 days of use. Storage capacity 16Mb flash, 60,000 pieces Fast vibration + OLED display + voice Tag identification number 10-bit hexadecimal in the reader (5 bytes).

The WM5000V4s device is a continuation of the classic VM5000V5 model, but with the addition of a bright LED light to the design, which helps to make detours on unlit routes at night. The device is used to control bypasses by reading passive RFID tags with saving data in memory with subsequent transfer of data to the program using a magnetic USB cable or by connecting to a smartphone for data transfer via mobile Internet. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program under Windows and with a WEB cloud. The body of the device is made of aluminum alloy with a silicone shell and impact-resistant plastic, which guarantees increased wear resistance. On the front of the case there is a touch button to turn on the flashlight, and its parameters can be configured in the program. When the tag is read, the blue LED lights up on the indicator and vibration occurs, and when the battery is low, the device signals with a red indicator. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and the program's default settings include a parameter for clearing the memory after data is transferred to the program. The battery charge lasts for 60 days when reading tags 500 times a day. The main advantage over competitors is comparable to the WM5000V5 model, this is high performance and a bright LED flashlight, amazing reliability and a service life of 10 years, as well as a simple and well-thought-out program. Dimensions, mm 148 x 42 x 34 Memory 60,000 entries Battery 3.7V/1150mA, Water and dust protection IP 67 Application temperature -50℃~+85℃ Reading tags RFID tags 125KHz, reading distance 3-5 cm Communication with PC Speed data transfer via USB : 15000 records/minute Indication in the device Vibration with color LED notification (red, green, blue)

The system is designed to control, register and record events recorded by the security service in the process of patrolling a protected area, and allows the heads of security companies to control the conscientiousness and accuracy of the performance of their duties by the security service. The hardware and software are intended for programming the Patrol Detour system and displaying information about the events that occurred on the patrol route. The software is compatible with Windows operating systems and has the following main functions: reading information, programming properties, clearing the reader's memory; creating patrol routes by patrol areas and bypass points; entering all route events into the database and restoring from the database; creating reports with printing.Main components and technical characteristicsReaderThe reader is designed to receive (read) data from the bypass points established along the route of the patrol.Case material: plastic, metal with a rubberized shell Protection class: IP67 Reader type: Touch Memory Protection class: IP67 Automatic registration of shocks Number of events in memory: 60,000 records Personnel ID tagObject tagSet of event tags Alarm clock mode Built-in flashlight PC connection: USB, magnetic contact Overall dimensions: 140 x 45 x 30 mm. Operating temperature range: from -40о to +85оС Weight: 200g. Format: Touch Memory Dallas1990A Size: 55 mm x 21 mm x 8 mm Weight: 4.3 g Format: Touch Memory Dallas1990A Size: diameter 16 mm x 5 mm Weight: 2.8 g Format: Touch Memory Dallas1990A Number of tags: 8 Weight: 71.6 g

WM-5000S guard tour reader is our latest RFID guard tour system. It inherits all the advantages of WM-5000V+. With a special waterproof gasket and adhesive, the guard tou reader is so waterproof that it can even work underwater. In addition, more than 60,000 readings can be stored until the next data download. The WM-5000S security device reader has its own features, light and smaller size, bright color, design, rechargeable battery, etc., which make it suitable for not only security tour route guard, as well as in areas such as hotels, hospital checks.WM-5000S guard tour reader works with popular RFID tag. With a simple contactless swipe, you can access the information from the tag and then upload the patrol data to our intelligent control program with a USB port. Information messages may show security guards monitoring. One set of WM-5000S RF system including: 1. WM-5000S reader2. rfid tags3. identity card 4. USB5 cable. In case wallet6. Software Portable RFID tag reader. Housing ABS plastic. Protection class IP-67, reading range 3-5 cm. USB data transfer. The built-in memory capacity is 60,000 entries.

WM-5000L5 is a state-of-the-art RFID (Radio Frequency IDentification) tag reader for patrol patrol monitoring system with real-time information transmission function. WM-5000L5 has the ability to communicate with the control center and send all the information from the reader directly to the control center via GPRS channel. In addition, the WM-5000L5 reader has the "Pansic Button" function in case of an emergency: a security officer in an emergency can press the alarm button, after which the control center can determine the location of the employee and provide him with assistance. The reader can be used to monitor employees security, work and location of personnel, property tracking (vending machines), airport security and warehouse systems (identification), patrolling, inspection of remote equipment and operating manuals. RFID tag reader. Housing ABS plastic, protection class IP-65, reading range 3-5 cm. Ability to communicate with the control center and send all information from the reader directly to the control center via the GPRS channel. Panic button function in case of emergency. Data transfer USB, GPRS. Memory capacity 15000 records.

RFID tag reader with wireless data acquisition technology. Housing material: Plastic, protection class - IP67. Built-in LCD display. Built-in flashlight and compass. Reading range - 3-5 cm.

The RFID reader is a device for monitoring the conscientious and timely fulfillment of duties by the security service. The device is made of plastic and metal with a rubberized shell, has an IP67 protection class, and can be used in all weather conditions. Reading type - contactless (Proximity) with a reading range of 3-5 cm, with an operating frequency of 125 kHz. The number of events in memory is 60,000 entries, which corresponds to 4 months of recording, under normal use (500 per day). Battery: 3.7 V Lithium, capacity 800 mA / h. Each bypass point and token has its own unique identification number, which is registered inside the transmitter and transmitted through the antenna when brought to the point / token of the reader inducing a magnetic field sufficient to transfer the identification number to the reader's memory. The identification numbers of points and tokens in the program correspond to the entered text description, which is displayed in the generated report. The reader is designed to receive data from bypass points established along the patrol route. To confirm the reading, vibration and light indication is used. This system is used to organize monitoring of industrial and residential facilities, pipelines, warehouses, banks, motor depots, airports, railway stations, etc. The hardware and software are designed to program the Patrol system. detour” and displaying information about the events that occurred on the patrol route. The software is compatible with Windows operating systems. Main functions: • reading information, programming properties, clearing the reader's memory; • creating patrol routes by patrol areas and bypass points; • entering all route events into the database and restoring from the database; • creating reports with printout. System composition Reader with wireless data acquisition technology, bypass points, personal tokens of security guards. Reader • Housing material: plastic, metal with a rubberized shell • Protection class: IP67 • Overall dimensions: 130 x 40 x 28 mm • Reading type: contactless (Proximity) • Operating frequency: 125 kHz • Operating temperature range: from -40° to +85°C • Humidity: up to 90% non-condensing • Memory: 4MB Flash ROM • Number of events in memory: 60,000 records • Indication: reading: vibration + light, charging - light • Battery: 3.7 V Lithium, capacity 800 mA/ h, deep discharge protection • Reading range: 3-5 cm • PC connection: USB cable, speed 57600 BPS, 4000 records/min. • weight: 200 g Guards' bypass points and personal tokens • Parameter: bypass point / token • Format: EM • Case material: ABS plastic • Case shape: Round or cylindrical • Weight: 2 g • Operating temperature range: from -20°C up to +50°C • Operating frequency: 125 kHz • Data type: unique 64 bit serial number (read only).

The RFID reader is a device for monitoring the conscientious and timely fulfillment of duties by the security service. The device is made of plastic and metal with a rubberized shell, has an IP67 protection class, and can be used in all weather conditions. Reading type - contactless (Proximity) with a reading range of 3-5 cm, with an operating frequency of 125 kHz. The number of events in memory is 60,000 entries, which corresponds to 4 months of recording, under normal use (500 per day). Battery: 3.7 V Lithium, capacity 800 mA / h. Each bypass point and token has its own unique identification number, which is registered inside the transmitter and transmitted through the antenna when brought to the point / token of the reader inducing a magnetic field sufficient to transfer the identification number to the reader's memory. The identification numbers of points and tokens in the program correspond to the entered text description, which is displayed in the generated report. The reader is designed to receive data from bypass points established along the patrol route. To confirm the reading, vibration and light indication is used. This system is used to organize monitoring of industrial and residential facilities, pipelines, warehouses, banks, motor depots, airports, railway stations, etc. The hardware and software are designed to program the Patrol system. detour” and displaying information about the events that occurred on the patrol route. The software is compatible with Windows operating systems. Main functions: • reading information, programming properties, clearing the reader's memory; • creating patrol routes by patrol areas and bypass points; • entering all route events into the database and restoring from the database; • creating reports with printout. RFID tag reader. Housing ABS-plastic, protection class IP-65, reading range 3-5 cm. GPRS, GSM. Has the function "Panic button" Data transfer USB, GPRS. Memory capacity 15000 records.

EM format, ABS plastic housing. The body shape is round. Operating temperature range From -20°C to +50°C, Operating frequency 125 kHz. Data type : 64 bit serial number.

The WM5000P4D device is equipped with a GPS receiver for tracking the location of the device and using GPS tags, has the function of voice calls to 5 numbers, helps the employee with voice alerts during work, and also has a SIM card slot for online control of bypasses by reading passive RFID and GPS tags from by transferring data to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, and data can also be transferred using a magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. On the side of the case there is an SOS button and a phone call control button. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, as well as vibration and a voice notification. When the battery is low, the display and red indicator show this information, a voice alert is played, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and the program's default settings include a parameter to clear the memory after data is transferred to the program. The battery charge lasts an average of 2 days when reading tags 500 times a day using GPS sending every minute. The device is fully charged in 2 hours. The main advantage of the device is the ability to track GPS location and GPS tags, make voice calls and transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Set: reader, cable, power adapter, cover. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (19 hours when sending data every 15 sec.) Water and dust protection IP 67 Application temperature -50℃~+85℃ Tag reading RFID tags 125KHz, reading distance 3-5 cm Communication 4G/GPRS/GSM/GPS, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display, LED indicator and voice alert.

The WM5000L4 device is a standard model with a SIM card for online control of bypasses by reading passive RFID tags with data transfer to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, the data can also be transferred using magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. There is an SOS button on the side of the case. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, and vibration occurs. When the battery is low, the display and red indicator show this information, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and in the default program settings there is a parameter for clearing the memory after transferring data to the program. The battery lasts for 4 days when reading tags 500 times a day. The device is fully charged in 2 hours. The main advantage of the device is the ability to transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (4 days) Protection against water and dust IP 67 Application temperature -50℃~+85℃ Reading tags RFID tags 125KHz, reading distance 3 -5cm 4G/GPRS/GSM communication, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display and LED indicator.