Product description
Counter: turbine, wafer type, EZ - IN series, 1 "x2". Turbine flowmeter, liquid, wafer type, EZ-IN type (device size 1 ", connections: mating with any flange 2"). there is no installation kit for the flow meter. Quantity 132 pieces . 2018 year . ASSY, FLOW ANALYZER, MC-III EXP, LITH PWRD (EXP 9A-50165003 & WP 9A-50165009) 9A-50179024 Part No: 2296694-01; Rev 03 SN : 12112455603 CAMERON USA 03/15/18 The NuFlo ™ Series MC-III ™ EXP Flow Analyzer (Explosion-Proof Extended Display Digitizer) is unmatched as a state-of-the-art, easy-to-use totalizer for liquid and gas flow measurement and data logging using Modbus communications and an explosion-proof enclosure. The MC-III EXP analyzer is capable of storing a large amount of flow information and transmitting it faster than any other flow analyzer on the market. This highly efficient instrument records up to 384 daily data blocks, 768 hour data blocks and 345 event data blocks and can transfer them to a computer in less than a minute using the Modbus® communication protocol! Frequently used operations can be accessed from the front panel six-button keypad or from the dynamic interface software, making it quick and easy to calibrate and tune the unit. NUFLO EZ-IN Series Turbine Flowmeter Part No: 9A-100062997, Rev 03 ASSY, FM, 1 / 2IN, EZ-N, STD P / N 9A-100005115 a / n Meter SN: 12114198404 CAMERON USA 04/26/18 Max VIP = 25.5MPa Max T = 121 0 C Turbine flowmeters Cameron NuFlo liquid with EZ IN® end connections with 6 vane rotor (1 "size, connection: mating with any 2" flange). NuFlo Liquid Turbine Meters are a tool for accurately calculating the flow rate of a fluid flowing through a pipeline. NuFlo Series Turbine Meters indicate flow rate and measure the total volume of fluid flowing through the pipeline. When the liquid flows through the flow meter and the flow around the rotor, the latter rotates with a frequency directly proportional to the flow rate. The movement of the rotor blades is sensed by a magnetic sensing element that generates a sinusoidal electrical signal. This signal is transmitted to indicating measuring devices. Areas of use: Turbine meters with a variety of end connections and level of accuracy have the following applications: • Measurements when ordering water • Installations for heat treatment • Metering and operational separators • Utilization wells • Carbon dioxide injection • Fuel and feed water for steam generators • Dosing of liquid fertilizers • Measurement of consumption of water, fuel and chemical products in factory conditions • Loading and unloading chemical tanks • Accounting for the consumption of liquid propane • Underground mining and ore leaching Part Number: 9A-100002077 Rev G Pickup, Nuflo, 7/8, THRU, 8 INCH Cameron 9 A -100002077 Flowmeter Magnetic Pickup Pickup Cameron Nuflo MV-100005111, 9A-100005111 Flow Analyzer Battery Voltage: 3.6 Volts Capacity: 17.0 Ah Chemistry: Lithium-Thionyl Chloride Termination: BA (Button Top - Pressure Terminals) LS33600-CN battery for Cameron Nuflo MC-II plus MC-III, MV-100005111, 9A-1000051
Learn more
Counter: turbine, wafer type, EZ-IN series, 1 "x2". Turbine flowmeter, liquid, wafer type, EZ-IN type (device size 1 ", connections: mating with any flange 2"). Quantity 132 pieces. 2018 year. - 64457
Available
USD
3000.0
-
4000.0
USD
Minimum order: 20 pcs
Supply ability: 130 pcs/per month
Meander-Aktau LLP
Not verified supplier
Kazakhstan
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
LLC "KoFa"
Russia
USD
8.0 - 10.5/pcs
DuPont™ Tyvek® 500 Hooded Jumpsuit Expert.Material: TYVEK polyethylene - 100%, 41 g/m²Weight: less than 180g.Closure: zipperDesign features: 3-piece hood provides optimal fit and freedom of movement of the head. Elasticated hood, cuffs and hem, glued-in elastic waistband.Design allows for freedom of movement.Easy to grip with gloves, oversized zipper pull tab.Tyvek® material is made from high-density polyethylene fibers using fast twist technology for a superior fit. protective properties, durability and convenience. Tyvek® is a breathable material that is permeable to air and water vapor, but repels splashes of aqueous solutions and aerosols. A high degree of barrier protection against fine particles, viral and bacterial agents, fibers up to 1 micron in size, and at the same time extremely low linting of the material itself. Antistatic treatment. Silicone-free. Applications: medical, pharmaceutical, chemical, oil and gas, equipment repair, paint spraying, general cleaning and many others. Complies with TR CU 019/2011Color: white Size range: S, M, L, XL, XXL, XXXL
Armada Company
United Arab Emirates
USD
550.0/pcs
550.0
High Precision Solid Density Meter Gold Purity Tester Density Meter 0.001-120g
Parameter:Model:XF-120KWeighing range:0.001-120gDensity accuracy:0.0001g/cm3Testing time: about 5sTest type: Gold, Platinum, KT gold, Silver, Palladium etc.
Armada Company
United Arab Emirates
USD
270.0/pcs
270.0
Digital Density Meter Precious Metal Gold Automatic Soild Density Detector
Name: Digital Density Meter
Voltage: 100-240V
Model: XFCNMD-3005S
Weighing range: 0.005-300g
Density readability: 0.001 g/cm3
Language system: support English
Measuring time: 5 seconds
Display screen: 5 inch industrial touch screen
Measurement type: any irregular solids, particles, floating bodies
Result display: density, volume, volume percentage,
density average, density minimum, density maximum
Measurement principle: Archimedes principle buoyancy method
Density range: density > 1, < 1 can be tested
Density measurement platform: ABS integrated injection molding,
free to choose the flip mode (magic measurement frame, can be freely removed)
Parameter setting: water temperature setting,
measuring solution density compensation setting,
standard material density setting, standard volume setting
Data statistics: automatic 100 groups of density value saving function,
and according to the number of saved groups automatically display the average value,
maximum value, minimum value
Calibration mode: single-point automatic calibration, multi-point automatic calibration
Data interface: RS-232 standard interface
Water sink: PC material integrated injection molding transparent sink
Water sinksize: 15.3×10.7×8.0cm (L×W×H)
Outer package size: 42.5×17.5×32.5cm (L×W×H)
Armada Company
United Arab Emirates
USD
200.0/pcs
200.0
Gold Purity Content Detector Gold K Value Tester Gold And Silver Density Meter
SpecificationModel:CC-1200KWeigh accuracy:0.005g~ 1200gMax weight:1200gProportion of precision:0.001 g/cm3Set function:Solution compensation temperature compensationTest time:about 10sTest function:Gold purity,K number or platinum platinum Pt two mixed metal mixing ratioOptional:Printer melting furnace. wind and dust cover,Pack size:45*24*46mmWeight:7.5kgPower:110V - 220V(V\HZ)
Specify the price
USD
0
0
ME2400 Vortex Flowmeter works on the Karman vortex street principle that swirls generated by a bluff body in the pipe. The number of swirls are proportional to the volumetric flow in the pipe. Vortex flowmeter widely used for gases, steam and liquid applications. It is ideal for measuring saturated and superheated steam in large facilities to improve steam production efficiency.
USD
90.0/pcs
90.0
The flow meter RSJ-50 is installed in the hydraulic compartment of the fuel dispenser. And it is designed to measure the volume of fuel passing through the hydraulic system of the fuel dispenser. In general, for this piston flowmeter, its accuracy is ±0.2%. Compared with similar products, this accuracy is higher and its lifespan is long-lasting. The flowmeter is an important guarantee for the metering function of the tanker. It can still work normally in an ultra-low temperature environment of minus 40 degrees.
Material & Structure of Flow Meter RSJ-50
◈Body material: aluminum alloy housing, stainless steel sleeves, composite piston seal, stainless steel rocker mechanism◈Structure: stainless steel cylinder liner, four-piston strokes◈Advantage: novel appearance, small body, high strength, good wear resistance, accurate measurement, long service life.
Working principle
The principle of operation of flow meter RSJ-50 is based on the passage of fuel through a metering device. Inside the flowmeter housing, it has four cylinders with pistons operating due to the kinetic energy of the liquid passing through them. The pressure of the liquid is created by an external oil transfer pump – ZYB-50. The pistons are placed in pairs on two connecting rods in four mutually perpendicular measuring cylinders with a volume of 0.125 liters each. Fuel alternately enters each of the four cylinders, then is fed to the output of the volume meter. Pistons with connecting rods under the pressure of fuel perform reciprocating motion in the cylinders. Connecting rods rotate a vertically positioned crankshaft, the free end of which protrudes outside the housing and is connected to the pulse generator by means of a coupling. It can complete with a rectangular O-ring IO50-09. Besides, O-rings are oil & gas-resistant with an operating temperature range from -40°C to +55°C.
Technical Parameters of Flow Meter RSJ-50
Model
RSJ-50
Flow rate
5L-60L/min
Discharge rate per revolution
0.5L
Adjustable Minimum Volume
0.05%
Accuracy
±0.2%
Repeatability
≤0.07%
Dimension
50*29*24cm
Net weight
10kg
Gross weight
10.5kg
Package
2PCS/CTN
USD
320.0/pcs
320.0
The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products.
Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy.
Counter with mechanical readout (SU)
Working principle of Flow Meter OGM-25/40
The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries.
Advantages of Oval Gear Flow Meter
◈Compact structure◈Easy maintenance◈Easy to read and operate mechanical display◈Flexible installation◈Low pressure drop
Technical Parameters
Model
OGM-25
OGM-40
Size
25mm/1”
40mm/1(1/2)”
Flow Rate Range
20~120L/min
40~400L/min
Accuracy
±0.5%
Repeatability
≤0.17%
Max. Pressure
16Bar
6Bar
Dimension
30*26*36cm
36*33*30cm
Net weight
7.5kg
19.5kg
Gross Weight
8kg
20.5kg
Package
1pc/carton
1pc/wooden case
USD
36.0/pcs
36.0
MSeries flow meter is a kind of positive displacement flowmeter, belong to the class with the highest accuracy in the . in the production of petroleum industry and , from oil extraction, transportation, smelting and processing to trade sales, flow measurement runs through the whole process. No link is inseparable from flow measurement, otherwise the normal production and trade exchanges in the petroleum industry will not be guaranteed.
Features of M series Flow Meter
Excellent stepless trimming device (wear compensation device) for positive and negative calibration of the flowmeter.
High accuracy and repeatability over a large range; ultra-high accuracy at constant flow.
Low maintenance, low wear, long life
Low pressure loss, true gravimeter
Measurement accuracy is not affected by changes in temperature, pressure and viscosity
Available in aluminium, cast iron, cast steel and stainless steel
Applications of M series Flow Meter
this kind of flow meter can be applied into various fields, such as refined petroleum products, unleaded gasoline, leaded gasoline, diesel oil, kerosene, fuel oil, propylene; motor oil, liquefied petroleum gas, crude oil, etc.
USD
38.0/pcs
38.0
This kind of fuel nozzles have small shape, light weight, easy to operate and convenient to use. Designed on customers’ demands, Jayo nozzles for fueling dispenser can provide durable long life and reliable service.
Materials of Fuel nozzles JY2101-11A
Body: Aluminum
Seals: Buna-N, Won
Main stem seals: Viton Cased Oil Seal / Graphite with Teflon
Main stem: Stainless steel
Features of Fueling Nozzles
♦ JY2101-11A automatic fueling nozzles are suitable for refilling diesel, kerosene and various gasoline.
♦ It is easy to replace the oil outlet pipe – just need to remove the screw on the oil outlet pipe and replace the new oil outlet pipe, related accessories can be obtained from Jayo Petro.
♦ Adopting small aluminum frame, this fuel nozzle shows light weight, easy to operate, unique and novel in appearance.
♦ This series fuel nozzles adopt the advanced vacuum design.
♦ The body uses casting process – sand casting process or high pressure casting proces, which reduces foam and static electricity generation.
♦ Users can control the fueling gun with one hand, convenient and quick to set the flow rate for the customer.
♦ This fueling nozzles adopt the integral insulated holster to protect the refueling gun and vehicle, and isolate the user’s hands from damage.
♦ Color selections •See color chart on inner page.
♦ Optional splash guard.
♦ Optional oil outlet pipe with attitude lock – when the oil outlet pipe is tilted upwards more than the horizontal position, the oil gun will be automatically closed to prevent leakage and accidents.
♦ 100% factory inspection.
Warning: Using other objects to keep the automatic fueling nozzles in the normally open state will cause the fuel gun to fail to close and personal injury.
HK Machinery
Turkey
Specify the price
USD
0
0
WASTE MINERAL OIL AND PETROLEUM PRODUCTS PROCESSING SYSTEMS Waste mineral oil recycling plant distillation refinery manufacturing assembly, The net work of waste oil recycling machines is made from 50 liters to 100,000 liters. The oil produced by the machine can be used as generator fuel without adding any additives. Crude oil processing distillation systems, Fuel oil processing and Bitumen asphalt oxidation systems and Various processing units of petroleum products. Additional information H.K Makine carries out turnkey projects in the country and abroad on waste oil recovery systems (waste oil, mineral oil, bilge oil, machine oil, etc.) of petroleum derivative products. Waste oil recovery facility is a company that tries to keep customer satisfaction at the highest level with its expert staff in installation, piping, electronic installation, automation, design and personnel training. The biggest advantage of H.K Makine in the operation of the waste oil recovery facility is that it does not leave its customers alone in the operation of the system, regardless of whether it is domestic or abroad. Waste Oil Regeneration Process and Machine Operation ●Basically, these types of oils (engine oil, hydraulic oil, gear oil, cutting oil, mixed petroleum oils) are used in waste oil recovery facilities. ● It is the conversion of waste oils into base oils and diesel under high temperature pyrolysis conditions in order to reuse waste oils. ● Waste oils are distilled at high temperatures and hydrocarbon molecules are broken down and a new oil is formed by aligning with a new combination. ● During the distillation process of waste oils, waste oil turns into gas and then turns into oil through the cooling process and is separated according to their density according to the demand and the final product is obtained. ● In the process of improving oxidation, bad odor and color in the refined oil, it removes the residual asphalt, moisture, acid, carbon oxidation in the oil. Obtained Products; ● Diesel ● Thin Base Oil ● Thick Base Oil ● Fuel Oil Waste Oils It is recycled in 2 main ways as Refining and Regeneration and separated according to 3 main categories. refining The process of converting waste oils into base oil or petroleum products in accordance with national or international standards and specifications by refining. Regeneration The process of obtaining original oil in accordance with international standards, specifications and intended use by removing all kinds of pollutants, oxidation products and particles from waste oils.
HK Machinery
Turkey
Specify the price
USD
0
0
HK MAKINE carries out turnkey projects in the country and abroad for the establishment of waste oil recycling facility. In Europe, Arab countries and African countries, the installation, assembly, design, electrical installation, piping work, personnel training, automation, insulation, performance tests and commissioning of the waste oil recycling facility at the desired capacity are carried out on a turnkey basis. Waste oils, which are among the hazardous wastes, have been an important part of the management plans of the countries. The Waste Oil Treatment Machine has an important role in minimizing the negative effects of waste oils that harm the environment and human health, and in using these hazardous waste oils with the best possible technologies to benefit the country's economy. Countries need to work in harmony with mineral oil facilities, recovery and disposal organizations, waste oil carriers, laws and regulations, which form the basis of waste oil management. In the management of waste motor oil recovery facilities, in addition to protecting the environment and human health at every stage, sensitivity on safety issues in all services should be kept at the highest level and should be continuously improved. Waste oil and used oil recycling plants are specially designed to convert used oil into quality base oil. Waste oil plants are an economical waste oil re-refining method that is not only an investment but also an environmental benefit. We have incorporated it into the front-end and back-end systems of waste oil recycling plants to perfect the combination of various primary separation and after-treatment steps. It ensures proper dehydration and pretreatment of the used oil so that it can be distilled in high vacuum to prevent cracking in the non-cracking evaporation unit. Working Principle of Waste Oil Recycling Plant Waste oils are converted into base oils and diesel by high-temperature separation method in order to reuse waste oils. By applying high temperature distillation to waste oils, their molecules are broken down and a new oil is formed. During distillation, the waste liquid oil turns into gas, and then it is cooled and separated according to their density in liquid form to obtain the final product. Obtained products; • Diesel • Thin base oil • Thick base oil • Fuel oil Mineral waste oils can be recycled by 2 different methods. These methods are as follows. Refining The process of refining waste mineral oils and converting them into base oil or petroleum products in accordance with national or international standards is called refining. Regeneration The process of obtaining original oil in accordance with international standards and specifications by removing the contaminants and foreign particles found in waste mineral oils is called regeneration. Our company offers turnkey solutions in the establishment of waste oil recycling plant, mineral waste oil recovery plant, waste motor oil recycling machine, mobile waste oil recycling machine, waste oil recovery plant, waste oil treatment machine and factory installation.
USD
20.0/m
20.0
We offers high quality hose for oil & gas recovery. Gas station oil and gas recovery refers to the collection of volatilized gasoline oil and gas during the process of loading and unloading gasoline and refueling vehicles, or reducing the pollution of oil and gas by one or two methods of absorption, adsorption or condensation, or change the oil and gas from gaseous to liquid, and then to gasoline again, so as to achieve the purpose of recycling.
The oil and gas recovery coaxial hose is used in the oil and gas recovery system of the oil dispenser. During the refueling process, it is connected to the oil and gas recovery fuel nozzle and the oil and gas separation valve. Between the middle layer and the outer wall is an oil circuit, and the middle pipe is a gas circuit. When refueling, the oil and gas are drawn into the underground oil tank from the gas circuit. The metal braid of the tube provides excellent kink resistance, low elongation and long service life.
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message