Diagnostics, repair, programming of industrial controllers - 70944

Seeding control system for MS-8 seeder The kit includes: 1.Controller device SKV-12/24 - 1pc; 2.Cable between the seeder and the tractor - 1pc; 3.Burn on the seeder - 1pc; 4. Seeding sensor - 8 pcs; 5. Path sensor - 1 piece; 6. Splitter with voltage limiter - 1pc; 7.Mounting kit - 1pc.

Controlled parameters: seeding rate; unit speed; productivity (ha / h); onboard voltage; sown area.   The control system signals: seeding rate out of the established limits; movement speed out of the established limits; voltage drop of the onboard network. Control system composition: Controller device SKV-12/24 - 1 piece; Splitter with voltage limiter - 1 piece; Cable between the seeder and the tractor - 1 piece; Seeder harness (differ depending on the seeder) - 1pc; Path sensor - 1 piece; Seeding sensors (the number depends on the row of the seeder); Mounting kit (differ depending on the seeder) - 1pc.

Controlled parameters: seeding rate; unit speed; productivity (ha / h); onboard voltage; sown area. The control system signals: seeding rate out of the established limits; movement speed out of the established limits; voltage drop of the onboard network. System advantages: Clear menu in Russian; Durable membrane keyboard protected from dust and oxidation; Bright LED monitor with a character size of 13x18 mm; Self-diagnostic function: the system performance can be checked without leaving the field; Autostart function: no need to separately start the system to get started. To start the metering program, it is enough to turn on the controller and start the movement of the unit. The presence of a splitter with a voltage limiter. A splitter with a limiter protects the system controller from incorrect connection to the on-board network; A capacitive seeding sensor is more reliable than an optical one, because does not react to dust; Interchangeable with old monitors such as Darina-U and Lemma. Control system composition: Controller device SKV-12/24 - 1 piece; Splitter with voltage limiter - 1 piece; Cable between the seeder and the tractor - 1 piece; Seeder harness (differ depending on the seeder) - 1pc; Path sensor - 1 piece; Seeding sensors - 8 pcs; Mounting kit (differ depending on the seeder) - 1pc.

Controlled parameters: seeding rate; unit speed; productivity (ha / h); onboard voltage; sown area. The control system signals: seeding rate out of the established limits; movement speed out of the established limits; voltage drop of the onboard network. System advantages: Clear menu in Russian; Durable membrane keyboard protected from dust and oxidation; Bright LED monitor with a character size of 13x18 mm; Self-diagnostic function: the system performance can be checked without leaving the field; Autostart function: no need to separately start the system to get started. To start the metering program, it is enough to turn on the controller and start the movement of the unit. The presence of a splitter with a voltage limiter. A splitter with a limiter protects the system controller from incorrect connection to the on-board network; A capacitive seeding sensor is more reliable than an optical one, because does not react to dust; Control system composition: Controller device SKV-12/24 - 1 piece; Splitter with voltage limiter - 1 piece; Cable between the seeder and the tractor - 1 piece; Seeder harness (differ depending on the seeder) - 1pc; Path sensor - 1 piece; Seeding sensors - 8 pcs; Mounting kit (differ depending on the seeder) - 1pc.

Automatic control systems of our production are modern, comprehensive solutions in the field of automation and protection of climate systems at civil and industrial construction facilities. They are manufactured both in standard design and on an individual order, taking into account all regulatory requirements in the field of safety and technical regulations of the Customs Union TR CU 004/2011 and 020/2011.   For the convenience of the consumer, standard circuit solutions are offered that implement a set of measures to ensure the smooth operation of the ventilation system and climate control equipment.   It is possible to manufacture installations with an integrated automation system on the principle of "on and running", which reduces the amount of design and installation work, as well as eliminate errors during installation and commissioning. The built-in automation provides for the installation of frequency converters and sensors with their disconnection in the control cabinet on the installation body.    The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.

Biometric terminal for access control and time attendance systems with fingerprint and card recognition. Housing made of industrial plastic with protection against moisture and dust according to the IP53 standard. Built-in optical fingerprint scanner and Em-Marin RFID card reader. Monochrome LCD display, backlit keypad, LED and audible indication. Status toggle buttons, 8 customizable toggle event types, work code registration. Support 16 user groups and 32 time zones, real-time monitoring. Built-in relay for lock control, IR finger sensor, support for PoE standard IEEE802.3af. Interfaces: Ethernet, mini USB, RS-485, Wiegand 26/34 (input/output), exit button, door sensor, case intrusion sensor. Identification by: card, finger, ID, card + finger, ID + finger, ID + card. Number of stored fingerprints: 2000. Number of stored events: 50000. Registration of users and events in offline and network modes. Anti-passback function with optional Anviz T5s reader. Size: 80(w)*180(h)*40(d)mm. Power supply 12V (from an external power supply or via PoE), from USB (without connecting a lock). The power supply is not included in the package. Free Russified AIM CrossChex software with time tracking functions included. Options - Mifare card reader, separate executive controller (SC011), additional output reader (T5S), 1C integration module, InTime Server, SDK. Processor 32-bit ARM MCU BioNano V10 algorithm Fingerprint scanner Optical sensor (sensor) AF0S300 Scanner activation mode Automatic activation using infrared sensor Scanning area 22mm x 18mm Resolution 500 DPI (dots per inch) LCD type 128*64 dots. Number of fingerprints in device memory 2000 Number of RFID cards in device memory 2000 Number of events in device memory 50000 Recognition modes Fingerprint, login + fingerprint, login + password, password + card, fingerprint + card Recognition time less than 0.5 sec FRR (type 1 recognition error) 0.001% FAR (type 2 recognition error) 0.00001% Communication interfaces RS485, USB device, TCP/IP, Wiegand (input/output switchable) Built-in card reader Built-in reader: 125KHZ EM RFID, Optional : 13.56MHZ Mifare Fingerprint display Yes Self-selection of the event status during registration 8 Work classifier Yes Messages 50 Notifications 30 Control of DC 12V executive devices, output to external devices (COM, NO, NC) Access groups and work schedule 15 access groups, 32 temporary gap Door lock sensor Yes Acoustic emitter (siren) Yes Operating voltage DC 12V Dimensions 80(w)*180(h)*40(d)mm Tempera outdoor mode -10℃~40℃ Degree of protection IP53(Waterproof housing) Certifications FCC, CE, GOST R(GOST R) Maximum number of employees in the system Up to 1000 employees Options Mifare card reader, separate executive controller (SC011), additional exit reader (T5S), 1C integration module, SDK, InTime server

Miniature biometric terminal for access control systems with a fingerprint and card scanner. Fits on the door leaf. Dust-, moisture - resistant case, IP54. Built-in fingerprint and card reader (Em-marin), finger sensor, LED backlight and audible alarm. Identification by: finger, card, finger + card, 3000 fingerprints, 50000 events. Interfaces: Ethernet, mini USB, RS-485, Wiegand 26/34 output, exit button. Registration of users and events in offline and network modes. Size 145x55x37 mm. Power supply 12V, USB, POE. Free Russified AIM standard or CrossChex software complete with time tracking functions. Anviz P7 is an innovative new generation biometric access control system Advanced Anviz BioNano fingerprint recognition algorithm Powerful processor and shock-resistant housing Backlit touch keyboard High-contrast and durable OLED display (organic light-emitting diode display) Powered by both external source and PoE Memory for 3,000 fingerprints, 3,000 cards and 50,000 event records Built-in EM-Marine proximity card reader Built-in relay (dry contacts) to control actuators (locks, turnstiles, etc.) Wiegand In&Out, TCP/IP, RS485 and Mini USB port Remote (slave) fingerprint reader and contactless cards Anviz T5S can be connected New generation fingerprint scanner AFOS407 - durable, waterproof, dustproof and scratch resistant 50,000 event records Auto-update template fingerprint logs of registered users Intuitive Russian-language interface USB and TCP/IP data exchange for remotely adding new employees to the device memory, managing the device and integrating into other access control systems Embedded Anviz software (included free of charge) Ease of installation: easily mounted on the door frame Ideal solution for employee access control and time tracking TI Stellaris® 32-Bit High Speed ​​CPU BioNANO algorithm AFOS407 Optical Sensor Fingerprint Scanner 128mm*64mm display of fingerprints in device memory 3,000 Event log capacity 50,000 Identification method Fingerprint, Card, ID+Fingerprint, ID+Password, Password+Card, Fingerprint+Card Identification time <0.5 sec False rejection rate 0.001% False acceptance rate 0, 00001% Interfaces RS485, USB, TCP/IP, Wiegand In&Out Read module EM-Marine cards 125 kHz Relay Direct control of the lock (turnstile, barrier, etc.) Wiegand 26 output/input Connection of remote (slave) fingerprint reader and RFID cards Anviz T5S yes Anti-Passback function ) yes Auto-update fingerprint template yes Open door sensor yes PoE yes, IEEE802.3af and IEEE802.3at Power supply 12V, 800mA Touch activation yes Power saving mode yes Alarm when case is opened yes Short message reception yes Size 54mm*170mm*41mm Material Wear-resistant industrial plastic

Anviz FacePass7 is an employee time tracking system with face recognition, contactless RFID cards or password. Guarantees user identification in less than 0.5 (!) seconds. Capacity for 3,000 users Logbook 100,000 event records Two scanning cameras ensure the most accurate identification, and a high-speed processor minimizes the time to recognize employees' faces Even factors such as skin color, facial expression, gender, hairstyle do not affect the accuracy and speed of identification , as well as the presence or absence of vegetation on the face Unique infrared illumination ensures stable operation of FacaPass7 even in complete darkness Sensitive 3.2” TFT touch display Voice guidance for user actions for ease of use of the terminal Direct control of the lock (dry contacts) USB-flash for download - TCP / IP (Ethernet) data upload for data exchange and device control over the Internet Alarm when opening the case. Contactless identification. Equipped with a new architecture and artificial intelligence. The infrared detection of Face Pass 7 provides 24/7 accurate identification and effectively prevents fake faces such as photos or videos. Secure identification in various environments and conditions With over a million faces worldwide verified, FacePass 7 has become one of the most accurate face recognition terminals , suitable for various conditions Even factors such as skin color, facial expression, gender, hairstyle, as well as the presence or absence of vegetation on the face do not affect the accuracy and speed of identification. Unique infrared light, ensures FacaPass7 works even in total darkness Built-in ultra-wide-angle camera provides 120-degree identification. Brand/Manufacturer LCD Display Type Number of Device Memory Events Messages Recognition Modes FAR Error (Unregistered User Access) FRR Error (Registered User Access Denied) Maximum Number of Employees in System Communication Interfaces Scanner Activation Mode Power Supply Operating Environment Dimensions Warranty Anviz 3 ,2” TFT touch display 100,000 50 Face, password and RFID 0.1% 1% up to 3,000 people TCP/IP, USB host infrared sensor 12 V -20°...+60 °C; humidity up to 95% 54 x 170 x 41 mm 1 year

New from storage never used. The signaling device for toxic and combustible gases STG-1 is used to issue an alarm about exceeding the established values ​​​​of the mass concentration of carbon monoxide in the air and the volume fraction of combustible gases (methane or propane-butane mixture). each alarm threshold allowing to turn on (turn off) ventilation, a siren and other actuators; - connection of the DU to the BCS with a three-wire cable; communication lines DB with BKS; - convenience in operation and ease of maintenance. Sensor block for signaling devices STG1-1D10 Price for everything in the photo

CNC Industrial Electronics Repair, CNC System Repair, CNC Electronics Repair, Industrial CNC Repair, CNC Repair, PCU Repair, NCU Repair, CNC Repair, PLC Repair, CNC System Repair, Operator Panel Repair, Servo Drive Repair, Servo Amplifier Repair, Repair servo motor, encoder repair, resolver repair, CNC controller repair, control board repair, power supply unit repair, linear unit repair, Positioner repair, radar control unit, recuperation unit repair, uninterruptible unit repair, frequency converter repair, axle drive repair, control panel repair, repair control systems, repair of electronic boards, repair of blocks, power supplies, Element-by-element diagnostics, Determination of faulty microcircuits, Replacement of faulty microcircuits, Repair of faulty boards, Writing off firmware from microcircuits, Writing firmware to microcircuits, Checking the performance of equipment on the stand, Setting up, Connecting, Parameterizing, Programming, Conclusion of a contract Provision of a guarantee for the repair of an electronic device 6 months. Fanuc CNC CNC 0i 0i-MD 0i-TD 0i-TB 0i-PD 0i-TC 32i-B 31i-B 31i-B5 30i-B 18i-MB 21i-TB MC 35i D 16i 6M 9M 11M Siemens Sinumerik CNC CNC 840D 810D 802D 828D 802S 840Di 840DE 808d 802 840 sl CNC System 8 3 Heidenhain CNC CNC iTNC TNC 640 620 320 6230 124 128 310 320 406 416 410 426 620 640 530 121 122 123 125 131 135 145 155 150 151 100 200 355 300 407 415 425 234 246 2500 306 310 335 351 355 360 370 430 232 B 332 MANUALpus 620 4110 PILOT 640 3190 4290 Bosch Rexroth Indramat CNC CNC BWO 900 MT-CNC IndraMotion MTX micro standard performance advanced MTC200 ISP200 MTA200 TRANS200 MT400G C220 Mitsubishi Electric CNCV M70V M7 E70 C70 E68 М700 60S MELDAS C6 C64 500 600 300 MAGIC50 Mazak CNC CNC Mazatrol MATRIX 2 NEXUS SMART PREVIEW 3 640mt prov 640t 640m 640 smooth x t1 t plus t32-3 t32b t32-6 cam m-2 smart m-32 t-2 Control Fagor Automation CNC CNC 8065 m 8060 8037 8055 8070 8055i 8050 8085 8025 ALLEN BRADLEY CNC CNC SERIES 9 8600 8400 7300 8200 mp 8601 6180 FIDIA CNC CNC C40 Visio n C20 nC19 nC 12R nC 15 C10 Delem CNC CNC DA-66T DA-56s DA-56 DA-58T DA-52s DA-60 DA-69T DA-50s DA-40s DA-41s DA-66W DA-65R da-24e Ema DA-21e da-65 DA-65w DA-51 DM-51 DA-21 DA-58 DA-58e BURNY CNC CNC PHANTOM II Phantom ST II BURNY 10LCD Plus BURNY 2.5 Plus BURNY 2.8 Plus BURNY 3 BURNY 5 BURNY 10 BURNY 10 LCD Burny 1250 Plus Burny 1400 Plus Replicator CCD Replicator 1000 CCD Replicator 1100 CCD AMC 4C2 AMC 4C AMC 4 XL Balt-System CNC CNC NC CNC NC-301, NC-302, NC-201M, NC-202, NC -210, NC-220, NC-230, NC-110, NC-310 Delta CNC CNC NC300 Haas CNC CNC CONTROL TL HYPERTHERM CNC CNC EDGE Pro Ti FMS FMS-3000 Comfort, FMS-3000 light, FMS-3100, FMS- 3000 standart, FMS-3200 comfort Mikros Mikros-12T, Mikros-12F, Mikros-12Sh, Mikros-12E, Mikros-12TS Mayak Mayak-600, EMayak-610, Mayak-610E, Mayak-621, Mayak-622, RASKIN Control Socapel 303, RASKIN RT 145, Cybelec MoDeva, DNC 880, DNC 600, DNC 60, LIEBHERR LC 255 CNC, CNC 2 PB 17, TOYODA, FLEX NC, STOECKEL, ROSA ECS CNC 2400 D, MARPOSS E 9034, OKUMA OSP 7 00 G, UNIC F, NUM 750 R 760, EMAG GEHRING II, KELLENBERGER KELCO 90, BRIDGEPORT EZ SURF, GPLUS 450 We offer diagnostics, repair, assembly, installation, commissioning of switchboard equipment from simple to complex solutions. Repair of power panels, input distribution devices, main switchboards, automatic transfer switch cabinets, various control cabinets, from the control of pumping stations, ventilation, lighting. Modernization (retrofit) of switchboard equipment at existing facilities. Experts will offer the optimal technical solution at a democratic cost.

Diagnostics, repair, programming of industrial controllers We will repair controllers DEIF, COMAP, DSE, DATAKOM and others. We carry out repairs as soon as possible! Diagnostics of equipment and determination of the cause of failure of the control unit. Alternator control unit firmware: replacement or software update. Replacement of previous generation controllers with new ones, programming for your generator, power plant and needs. Controller repair, replacement of individual elements. Installation of the controller into the generator and commissioning.

Overhaul of diesel generator automation: - diagnostics and replacement of the diesel generator controller with their calibration; - production of a control cabinet based on analog devices or based on controllers, with various degrees of automation. It is possible to manufacture an analogue of old discontinued remotes. Overhaul and installation of an electronic speed controller at the Customer's diesel power plant - selection and installation of the Actuator on the Customer's injection pump with the manufacture of mounting plates, setting up the Speed ​​Control Unit and installing an induction speed sensor on the flywheel.