Product description
Laser engraving machine - Laser complex Raylogic 11G 1490 is a productive engraving machine with numerical control and a working area of 1400x900 mm. Laser complex Raylogic 11G 1490 is an engraving machine, first of all, in demand in the advertising industry. It can be used to carry out: cutting, precise engraving, 3D processing. The Raylogic 11G laser engraving machine is equipped with high quality Zn Selenide (ZnSe) lenses with high throughput. The basic equipment includes long-focus lenses, which are well suited for cutting and also allow engraving with a fairly high accuracy. For greater accuracy of engraving, you can order a short-focus lens, which will give greater accuracy of engraving, but will be less suitable for cutting (this will be especially noticeable on thick materials). Main areas of application: advertising industry woodworking souvenir products interior and decor elements Specifications: Laser type: CO2; Cooling: Water; Power supply: AC 220V / 50HZ; Laser power: 120W extended service life; Length / diameter of the laser head (mm): 1400/80; The size of the engraving / cutting field, mm: 1400 x 900; Engraving speed (mm / sec): 0 - 1000; Accuracy of engraving, mm: 0.01; Acceptable file types: BMP, JPEG, PLT, DXF; Control system: DSP digital signal processor Power consumption: <2500W; Lift table: Yes (electric screw); Data transfer port: USB; Dimensions (mm) WxDxH: 2000 x 1400 x 1100; Weight (kg): 300; What's in the box: Raylogic 11G 1490 Laser emitter: 120W extended life Table plane: Rack table Lift table: Electric screw adjustable up to 25cm Machine frame: Collapsible design Exhaust: Centrifugal fan Cylinder engraving device Cooling system: Water pump Lens blowing, cutting zones: Air compressor Computer connection: USB cable Machine power supply: Eurocable 220V / 50HZ Software: Integrated in Corel Draw, Autocad, Windows Literature: Instructions in Russian, instructions in electronic form
Learn more
Check availability
5776.4
USD/pcs
5776.4
USD
Minimum order: not specified
Supply ability: not specified
3D Tool
Not verified supplier
Russia
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
LLC "KoFa"
Russia
USD
0.98/pcs
0.98
Reusable lint-free cloth for clean rooms, laboratories, operating rooms, industries with increased requirements for cleanliness. • Used to remove excess sealant, mastic and other contaminants. • Due to the special structure of the knit, they have excellent absorbent properties and are able to capture dust particles. • Wipes do not contain silicone. • Convenient size and unique strength properties provide multiple use - at least 50 applications. • Maintain hostile environment for processing - solvents, acids, alcohols. • Sterilization is possible. (Autoclave, chemistry) Particularly strong and durable - technical cloth with overlaid edges. The standard size of 35x40 cm is convenient for any manipulations when cleaning or wiping equipment. Package options: 3 pcs. 5 pieces. 10 pieces. and more FORMULA FOR CALCULATION OF THE BENEFITS OF APPLICATION AND PURCHASE: 90r / 50 applications = 1rub 80 kopecks for 1 application!!!
Midea Uzbekistan
Uzbekistan
USD
455.0/pcs
455.0
Welkin LLC, which is a representative of the world-famous Chinese brand MIDEA, and all products comply with the international quality standard: ISO 9001 For 10 years, we have been playing a key role in the air conditioning systems market in the Republic of Uzbekistan. The company has more than 20 engineers with many years of experience in the construction and operation of climate control equipment, as well as over 7,000 m2 of warehouse space, offices and repair shops throughout the country. Our employees have completed detailed designs, equipment supply, installation and commissioning of more than 150 civil and industrial facilities! Welkin LLC will be able to take on all the problems and difficulties in matters of equipping with climate control equipment - industrial household, air conditioners, humidifiers, purifiers, dehumidifiers for your Administrative buildings and production!
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Specification:
1. Exhaust System: Front
2. Suction Power:85-90kg
3. Slide Hammer Weight:3.5lb
4. Air Inlet:1/4"
5. Air Pressure:6kg/cm2
6. Air Consumption:240L/min
7. Net Weight:2750g
8. Tool Length:1120mm
9. Packing:4pcs/14kg/16kg/1.32'
Application:
It supplies a new way that save a lot of time to fix steel plate. Let the obsession with dent throw out. It's the best way to solve. As easy as pie to use.
When pressure valve is bon after a few minute, however is a dent of car, an oil box of motorcycle or a steel plate of air plane, all of trouble will be solved.
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill.
Specification:
1. Free Speed:3000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:540L/min
5. Net Weight:895g
6. Tool Length:240mm
7. Collet Size: 6mm (1/4")
8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T)
9. Packing:10pcs/10kg/11kg/0.53'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
60mmx260mm
Miniaturized, lightweight and 1.3 kgs only.
Handle angle can adjusting range reach 180.
Adjustable guide shaft.
Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution.
Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc.
From grind to the surface polishing all can application.
Rid of surface scar and deckle edge.
Stainless steel surface tiny mark processed.
Specification:
1. Free Speed:17000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:650L/min
5. Net Weight:1300g
6. Tool Length:1900mm
7. Exhaust System: Rear
8. Packing:10pcs/15kg/16kg/2.3'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Rubber sleeve keeps hands from getting cold or slip
Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to
the tool.
Front thumb-adjustable water knob enhances the tool control.
No visible water tube and screw make a seamless smooth touch and no more break risk when dropping.
Cast from aircraft aluminum.
The watertight sealed bearings provide long life and smooth rotational speeds.
The water and air controls are simple to use and conveniently located.
Rear air vent removes exhaust through a hose protector, away from operator's hands.
The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet!
Detachable rotor and gear design brings you an economical repair
Specification:
1. Free Speed:4500 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:660L/min
5. Net Weight:1220g
6. Tool Length:235mm
7. Exhaust System: Front
8. Packing:10pcs/21kg/22kg/1.38'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface.
It can purge hardened surface of metal that made from discharge electricity quickly.
Long life, high speed, light weight and trouble free.
to the processing of footwear, mold and woodworking industries
Specification:
1. Strokes Per Minute:3400 spm
2. File Shake Dia:5mm
3. Stroke Length:5mm
4. Air Inlet:1/4"
5. Air Pressure:6kg/cm2
6. Air Consumption:150L/min
7. Net Weight:580g
8. Tool Length:700mm
9. Packing:10pcs/8kg/9kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
Flux Chipper it's powerful for exerting and chisel is suitable to dismantle.
It's was designed specially to use for a long time. And suitable for boat, machine and
large instrument to clear off the rust and adhesion underside.
Specification:
1. Blow Per Minute:3000 b/min
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:200L/min
5. Net Weight:1800g
6. Tool Length:230mm
7. Packing:5pcs/11kg/11.5kg/0.4'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
Needle Scaler powerful for exerting and chisel is suitable to dismantle.
It's was designed specially to use for a long time. And suitable for boat, machine and
large instrument to clear off the rust and adhesion underside.
Specification:
1. Blow Per Minute:3000 b/min
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:200L/min
5. Net Weight:2590g
6. Tool Length:385mm
7. Needle:19 pcs
8. Packing:5pcs/14kg/14.5kg/0.4'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
The 3” PAD supply various of sponge and wool-wheel for partial.
Small volume, light weight, low noise. It’s suitable for the small area to smooth.
A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.
Specification:
1. Free Speed:2500 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:790g
6. Tool Length:160mm
7. Packing:20pcs/20kg/21kg/1.2'
Claire Wang
Taichung City, Taiwan
USD
100.0 - 1000.0/pcs
Description:
There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind.
Long life, high speed. Light weight and trouble free.
A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.
Specification:
1. Free Speed:15000 rpm
2. Air Inlet:1/4"
3. Air Pressure:6kg/cm2
4. Air Consumption:600L/min
5. Net Weight:650g
6. Tool Length:160mm
7. Packing:20pcs/18kg/19kg/1.2'
Technomax
Montenegro
USD
160.0/pcs
160.0
Characteristics: Dust collector type: container. Type of cleaning: dry. Suction power: 470 W. Power consumption: 2100 W. Additional features: automatic cord rewind. Suction pipe: telescopic. Includes: crevice nozzle, universal nozzle for dry cleaning. Dust container volume: 2 l • Noise level: 79 dB. Weight: 5.5 kg. Power cord length: 7 m. Color: silver, black. Manufacturer: Philips, Philips.
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message