BVM MEDICAL LIMITED

Description ECO 450Power 100 W.Speed up to 35.000 rpm.Torque 4.5 N/cm.OTHERS: Full accuracy to control the rpm from 0 to maximum.Includes handpiece SH37LN.

Description Wireless Printer for CDP ethylometers 8100 (Ref: 709-CDP8100) - 8800 (Ref. 709-CDP8800).Wireless Printer for cdp-8100 ethylometers electrochemical sensor allows the printing of receipts remotely from a distance without wires up to 50 meters. A single printer is capable of serving more than 5 ethylometers simultaneously, thus dramatically optimizes the effectiveness and productivity of resources in a process of control, especially at the roadside. Features: Print Method: Direct thermal paper. Print Paper Width: 58 mm. Valid print width: 48 mm. Print Density: 8 dots / mm. (203 dpi), 384 dots / line. Print speed: 32 mm / second (approximately). Print Paper Weight: 60 - 80 um. Print source: GB Level I, Chinese Character Library, ASCII Characters, EAN13, EAN8 barcodes, Graph. Life of print head: 50 km. Operating temperature: 5 º C - 45 ° C Relative Humidity: 20% - 85%. Storage temperature: -20 º C - 70 ° C. Relative Humidity: 5% - 95%. Physical characteristics of the printer: Dimensions: 77.4 x 103 x 36 mm. Weight: 200g (not including paper roll). Paper Roll Diameter: 40 mm (approximately). Interface: Wireless. Further information on the printer: Paper feed mode: Clamshell mode. Black mark Location: Available. Roll Paper end detection: When paper runs out, the mode indicator flashes. Print Command: ESC / POS command compatible. Power supply: Rechargeable Nickel - Hydrogen (1500 mAh). Notice to battery: When the battery runs out. the Power Indicator turns red and beeps. Automatic Sleep Mode: If the printer is not printing signals for a time, enter the Idle mode automatically. It will run again, automatically, when you receive any print signal. Time to recharge the battery: 1 to 3 hours. Usage time of battery: After charging the battery, with a density of less than 25%, print 90 meters and 12 hours in standby mode. Take this as a reference parameter, the time may vary depending on usage. Information we receive the printed receipt: Reference device. Number of printed report. Date. Time. Room temperature. Result. State or mode of the device .. Individual examined. Vehicle registration. Address. Signature of person examined. Police Reference (number plate).

Description Electro stimulator GENESY SII 2 channels for professional use in Physiotherapy. Features: 60 programmes: 12 Sport – 8 Fitness, Beauty, Wellness – 16 Pain-Tens - 9 Prevention – 11 Rehabilitation - 3 Incontinence – 1 Ionophoresis. Programmable: Genesy SII has 6 free memories where it is possible to insert the desired parameters creating your own programmes. Syncrostim: It is possible to increase the intensity of the 4 channels simultaneously using only one button. Ionophoresis: Ionophoresis is the ideal treatment for inflammatory diseases such as bursitis, tendinitis, fasciitis, myositis, etc. Prevention: 9 programmes to reinforce the main joints and to prevent traumas and injuries. Rehab: Muscle stimulation programmes are particularly indicated for the functional recovery after surgical articulation interventions and after immobilisation periods. Pain: It eliminates pain with the special pulses of TENS currents that help you to recover your health, wellness and a renovated life enjoyment. Incontinence: three specific programmes to treat this urological disorder. Sport: Genesy SII  is programmed in order to selectively stimulate fast and slow fibers to train different muscle qualities. Fitness, Beauty & Wellness: With Genesy SII, you can take care of your body and boost its vitality and beauty using the electrostimulation beauty treatments. Technical data: Channels: 2 independent channels Frequency: 0 - 150 Hz Power: 100 mA per channel Pulse amplitude: 50 - 400 μs Waveform: Square, biphasic, symmetrical and compensated wave Power supply: rechargeable battery Backlit display Device classification: II A in compliance with the Directive 93/42/CEE-2007/47/CEE Accessories included: 1 GLOBUS GENESY SII Stimulator Accessories: 1 carrying case 2 cables for electrode connection 4 self-adhesive square electrodes 4 self-adhesive rectangular electrodes 1 charger List of programmes: Sport:DEMO / Motor point pen / Warm-up lower Limbs / Pre-competition warm-up lower limbs / Maximum strength lower limbs / Endurance strength lower limbs / Explosive strength lower limbs / Reactivity  lower limbs / Capillarization lower limbs / Active Recovery lower limbs / Muscle cool down lower limbs / Decontracting lower limbs TENS & Pain:Conventional antalgic Tens / Endorphinic Tens / Rotator cuff tendinitis / Muscle pain / Knee osteoarthritis / Post-surgical pain / Muscle injuries / Cervical pain / Trapezius pain / Sciatica / Lumbago / Epicondilytis / S-H periarthritis / Carpal tunnel osteoarthritis / Menstrual pain Fitness, Beauty & Wellness:Leg anticellulite lipolysis / Leg drainage / Leg firming / Leg toning / Leg sculpting / Abdominal area post- pregnancy drainage / Abdominal area post-pregnancy lipolysis / Abdominal area post- pregnancy toning Prevention:Ankle prevention / Knee prevention / Quadriceps muscle prevention / Lower limbs reathletization / Shoulder reathletization / Shoulder prevention / Elbow prevention / Upper llimbs reathletization / Ankle reathletization Rehab:Conventional antalgic Tens / Vastus medialis reinforcement / Swollen ankles / Hemiplegy-Upper Limbs / Hemiplegy-Lower Limbs / Recovery after ACL surgery / Functional recovery lower limbs / Quadriceps atrophy with prosthetics / Shoulder sublaxation prevention / Muscle spasms / Multiple sclerosis- leg flexor and extensor muscles / Multiple sclerosis-ankle flexor and extensor muscles Incontinence:Mixed Incontinence / Stress Incontinence / Urge Incontinence Ionophoresis

Description The POWERbreathe Medic is a device designed specifically for inspiratory muscle training on respiratory and cardiac patients. Has a resistance to the inspiration that is adjustable by the adjustment knob. Nasal Forceps The nose clip is designed to prevent the entry of air through the nasal passages while we perform inspiratory training, because if cogiéramos air through the nose that air would not be going through the POWERbreathe thus would have no effect from the point of view inspiratory muscle training.It is essential to use the nose clip while using the POWERbreathe, if we control the path of inspiration (so that only gather them through your mouth), not using the nose clip does not alter the effects of training. Intensity Levels Intensity levels are related to the resistance of the POWERbreathe Medic inspiration. Resistance in respiratory medicine unit of measurement used as a centimeter of water (cm H2O). Resistance levels range between 10 and 90.

Description Electrocardiograph ECG-100G single-channel with thermal printing of ECG waveforms. Functions: It registers and displays the ECG waveforms in automatic and manual mode, it indicates lack of paper and low voltage disconnection. Features: FSTN screen of 2.7" to show working status and ECG waveform (check the waveform before printing). Output system: high resolution thermal printing sysytem (32 points/mm) without adjustement needed. Register frequency response up to 150Hz. The equipment can register ECG waveform and make indications. Indications include: low voltage signal, sensitivity, paper speed, condition of the filter. In automatic mode, you just push the button to start the register process. Touch control keyboard. Classification: Class I, CG defibrillator proof. Supply: AC/DC, inner rechargeable lithium battery. This device allows to register 160 waveforms during 10 hours with DC connection. Smart and light design. According to the degree of classification of harming fluids, this device belongs to commom devices. Digital signal processor for effective inhibition of CA, EMG and DFT, that allows to obtain the best ECG waveform. According to classification by work mode, this device belongs to continuous operation devices. Specifications: Input circuit: floating, defibrillator proof Leads: standard leads Patient leakage current: <10μA Sampling rate: 1000Hz A/D converter: 10 Bits Frequency response: 0.05Hz~150Hz (-3dB, +0.4dB) Time constant: >3.2s CMRR: >60dB, >100dB (with AC filter) Polarisation voltage: ±500mV Noise level: ≤ 15μVp-p Filter of EMG interference: 35Hz (-3dB) AC filter: 50Hz/60Hz (≤20dB) Sensitivity: 5, 10, 20mm/mV, error ±5%. Standard sensitivity is 10mm/mV 0.2mm/mV. Register mode: thermal printing system. Automatic registration: depending on registration format and the established mode, selection of automatic lead and automatic measurement. Manual registration: depending on registration format, select manual lead. Print paper: high-quality register thermal paper (50mm x 20mm) Paper speed: 25mm/s, 50mm,/s, error: ±5% Equipment security type: Class I, CF type defibrillation proof. Fuses: 2 units of Ø5x20mm, delay time AC; T1.6AL250V Power supply: AC-240V, 50/60Hz, DC-rechargeable lithium battery 7.4V, 2000mAh. Operation conditions: Ambient temperature: +5ºC ~ +35º Relative humidity: ≤80% Atmospheric pressure: 86kPa ~ 106kPa Storage and transport: Ambient temperature: -10ºC ~ +55º Relative humidity: ≤95% Atmospheric pressure: 50kPa ~ 106kPa Included accessories: ECG cable: 1 set. Electrodes: 1 set. Mains cable. Printing paper: 12 units. Grounding cable. User manual. Measures and weight: 4 x 18 x 36 cm (length x width x height) / 1.57 x 7.09 x 14.14 in 4.5 Kg./ 9.92 lb Compatible accessories: Paper roll: Ref. 436-1005003

Description Portable electrocardiograph (ECG) machine designed for families and individual users. * Not suitable for children. It is really helpful for preventing cardiovascular diseases at home since it can monitor the electrocardiogram (ECG) of users anywhere in a simple way.The device can record, analyse and display the ECG wave (electrocardiographic waveforms) of the users and capture pathological ECG waves if they suffer from heart disease or other unpleasant symptoms. This ECG machine can be easily carried thanks to its small size, which widens its scope of use. It will help to save you physical examinations. Features: Elegant design, practical operation, lightweight and user-friendliness. It monitors and records ECG and HR waves (Heart Rate) anytime, anywhere. Built-in, high-capacity rechargeable lithium battery. It can record up to 200 ECG waveforms after a single recharge. Scope of use: Environment Family, medical-clinical, hospitals. (The device cannot replace a general electrocardiogram for clinical examination). Target group People with high blood pressure or high workload, patients with heart disease, middle-aged or elderly people, individuals with poor health. Used for: The device is used exclusively for ECG monitoring and data storage. It is NOT a therapeutic instrument. The operation method is simple and requires little effort on the part of the user. Technical data: Operation environment: Temperature: +5 ºC ~ +40 ºC Relative humidity: 25% ~ 80% Power supply: Built-in, rechargeable lithium battery, voltage: 3.7V Transport and storage environment: Temperature: -+40 ºC ~ +55 ºC Relative humidity: ≤95% Calibration voltage: 1mV±5% Sensitivity: 10mm/mV±5% Typical frequency modulation: Standard: 10Hz; 1Hz~20Hz; (+0.4dB,-3dB) Noise level: ≤30μV Common mode rejection (CMRR): ≥60dB Scan speed: 25 mm/s±5% Sample rate: 250 points/s Range of heart rate (HR): 30bpm ~ 300bpm, error: ±1bpm or 1% Type of protection against electric shock:  Internally powered device Degree of protection against electric shock:  Applied parts type BF Degree of protection against water ingress: IP22

Description Atrauman Ag is an ointment impregnated silver containing wound contact layer. It prevents secondary dressings from sticking to wounds, provides skin care for the wound edges and is antibacterially effective when bacteria come into direct contact with the dressing. Bacteria are destroyed when they come into direct contact with the dressing. Atrauman Ag can be combined with all secondary wound dressings (e.g. TenderWet24 active, PermaFoam, Zetuvit etc) and Sorbalgon without restriction. Atrauman Ag is an ointment impregnated silver containing wound contact layer. It prevents secondary dressings from sticking to wounds, provides skin care for the wound edges and is antibacterially effective when bacteria come into direct contact with the dressing. Antibacterial mode of action of Atrauman Ag: Bacteria are destroyed when they come into direct contact with the dressing. The wound exudate together with the killed bacteria and the endotoxins formed in the process are absorbed into the secondary wound dressing. Atrauman Ag can be combined with all kinds of absorbent wound dressings. For example, hydroactive or gauze dressings are such dressings that are suitable for use as a secondary dressing. Atrauman Ag is suitable for the complementary use in the treatment of infected wounds or wounds showing critical colonization as well as for infection prophylaxis.

Description Paper roll for printer. Measures: 50 mm x 20 mm   Compatible devices: 550-S80 - Digital electrocardiograph, with 1 channel 550-60 - Pulse oximeter with printer and shockproof housing ECG100G - Digital Electrocardiograph ECG Series 1 channel 550-6000I - Vital constant Monitor TFT color 8.4 "Printer, carrying case 550-8000I - Vital constant Monitor Portable color TFT 12.1 "with printer 550-6000I-VET - Monitor Vital for VETERINARY constant with TFT color display 8.4 " 550-9200I - Vital constant Monitor 15 "TFT display, 3 LED Accessories included

Description Mobile support with micrometric control. Placing controls manually by micrometer. Dimensions: 185X145mm; Travel: 25mm (X) x 25mm (Y); Micrometric controls resolution: 0.01mm.

Description For applications subject to verification, also request initial verification at the same time because it cannot be done later. Factory verification, we need place of installation with zip code. Indication of capacity. A rising strip of light indicates the weighing range still available 4-digit identification number, freely programmable via 2 keys Robust and stable metal cover Technical data: Additional technical measurement data: 627- ABJ220-4M Max measuring range: 220 g Reading d: 0.0001 g Reproducibility: 0.0001 g Linearity: ± 0.0002 g Stabilization time: 5 s Sensitive deviation (° C): 2 * 10 ^ -6 Housing dimensions WxDxH: 225x315x330 mm Housing material: metal Windshield WxDxH mm: inside: 190x159x225 mm Windshield material: glass Packaging dimensions WxDxH (mm): 500x390x535 Gross weight kg: 9 Net weight kg: 7 Weighing pan dimensions (Ø / AxP): 8 cm

Description For applications subject to verification, also request initial verification at the same time because it cannot be done later. Factory verification, we need place of installation with zip code. Large, backlit LCD display with 52mm high digits Industrial quality: Ideal for long-lasting use in the industrial sector thanks to its stable construction and its robustness Table base plate wall support for indicating device, standard Weighing with tolerance range (check-weighing): Entry of an upper / lower limit value. An optical and acoustic signal facilitates the process of rationing, dosing or classifying by way of counting Sum of weight values Dynamic weighing: a stable mean value is created at the press of a key in the event of uneven ambient conditions or animal weighing Technical data: Max measuring range: 30 kg; 60 kg Reading d: 10 g; 20 g Reproducibility: 10 g; 20 g Linearity: ± 10 g; 20 g Stabilization time: 2 s Sensitive deviation (° C): 5 * 10 ^ -6 Housing dimensions WxDxH: 560x300x490 mm (incl. Pole) Housing material: plastic Packaging dimensions WxDxH (mm): 470x800x240 Gross weight kg: 12 Net weight kg: 10 Weighing pan dimensions (Ø / AxP): 400x300x128 mm

Description Biological binocular microscope, lens 4x, 10x, 40x, 100x Binocular biological microscope with 4x, 10x, 40x and 100x objectives. This type of equipment is recommended for research centres, laboratories or hospitals. It allows for viewing in detail cells, bacteriae, fungi or tiny tissues. Lenses: Magnification: 10x Focal length: 25 Lens diameter: 18 mm / 0.7 in Features: Head: binocular Swivel: 360 ° Inclination: 45 ° Eyepieces: WF 10x18 mm (2 units) WF 16x (2 units) Objectives: plan achromatic 4x, 10xPh, 40xPh, 100xPh (immersion). Revolving nosepiece: quadruple Stage: DIM 160 x 142 mm (6.3 x 5.6 in), movement range 76 x 52 mm / 3 x 2 in Focus range: 14 mm / 0.5 in Condenser: 1.25 NA Abbe with centering system Illumination: white LED, with brightness control Dimensions: Length: 140 mm / 5.5 in Width: 190 mm / 7.48 in Height: 350 mm / 13.8 in Weight: 3 kg (6.6 lb) approx