painting supplies - 98888

Cathodic electrophoresis coating process: 1. Pre-treatment of car body Before the car enters the electrophoresis tank, it needs to be pretreated for the body, including rust removal and paint removal. This is usually done by sand blasting machine and polishing machine. 2. Electrophoresis The car is put into the electrophoresis tank and the paint is evenly coated on the surface of the body through the electrophoresis process. In this process, the car body is connected to the positive pole of the power supply and the paint is connected to the negative pole of the power supply. Through electrophoresis, the pigment particles in the paint are deposited on the surface of the car body to form a uniform coating. 3. Washing and drying After electrophoresis is completed, the body needs to be washed and dried to remove excess paint and impurities. These steps are usually accomplished using high pressure water guns and drying equipment. 4. Coating Curing Coating curing is one of the key steps in the coating process, which uses heat to make the pigment particles in the coating adhere more stably to the surface of the body. Infrared curing ovens are usually used for this step. 5. Post-treatment Post-treatment includes inspection, painting, quality inspection and other steps to ensure that the body surface meets the quality requirements.

Automatic powder coating line is an automated production line that achieves efficient, high-quality production by conveying materials to different work areas and applying them to the substrate using a powder coating process. It can be applied to iron, steel, aluminum, stainless steel, titanium, and also chrome-plated surfaces. OURS COATING powder coating system will allow you to apply a durable, protective coating to any metal component quickly, easily and safely.   Composition: A complete automatic powder coating line consists of following parts: 1. Pre-treatment equipment: the workpiece to be powder coated to do degreasing, descaling, decontamination, de-graying and other pre-treatment (commonly used spray, tank dipping, sand blasting, shot blasting, etc.); 2. Powder spraying equipment has electrostatic powder coating machine (automatic spraying machine and reciprocator), powder coating booth, powder recycling system (ordinary cartridge recycling device, mono-cyclone recycling device, etc.); 3. Powder curing oven (box-type, straight tunnel type, bridge type); 4. Conveyor system (hanging chain type, power and free type, floor type); 5. Heating system (electricity, coal, diesel, natural gas, liquefied gas, etc.); 7. Electrical control system (divided into centralized control and individual control)

For tinting oils and wax, we recommend using our tints, which easily give the desired shade while maintaining the decorative effect of the wood grain. Our unique paint and varnish coating formulations are based on natural and modified natural ingredients. The composition of Nevskaya Artel products includes such ingredients as: linseed oil, pine resin, beeswax, gum turpentine. The entire line of our wood processing products is manufactured in Russia using domestic raw materials, which eliminates dependence on imports.

Application: To protect shelves, walls, floors in steam rooms. For bath utensils. Enhanced moisture resistance. Apply wax to the surface of the wood with a brush, brush or rag. Remove excess wax. After 24 hours, polish with a polishing machine or a rag. If necessary, you can apply wax as a second layer. Drying time: 24 hours at an optimal temperature of 20C and humidity 60%. Consumption for planed wood: in one layer - up to 18 m2, in two layers - up to 10 m2. Note: We also recommend paying attention to the entire line of wood products from the Nevskaya Artel brand.

Application: To protect shelves, walls, floors in steam rooms. For bath utensils. Enhanced moisture resistance. Apply wax to the surface of the wood with a brush, brush or rag. Remove excess wax. After 24 hours, polish with a polishing machine or a rag. If necessary, you can apply wax in a second layer. Drying time: 24 hours at an optimal temperature of 20C and humidity 60%. Consumption for planed wood: in one layer - up to 18 m2, in two layers - up to 10 m2.

E-Z MIX provides a variety of painting supplies designed with precision to help you measure, mix, pour, store, and touch-up a variety of coatings.

Isobutyl alcohol or isobutanol is used as a solvent in the paint and varnish industry, for the production of esters, paints and all kinds of organic compounds. It is obtained, as well as butyl alcohol chemically close to it, by oxosynthesis from propylene.

General Features. Size: 17.5 x 9.5cm. Colour: Blue and white. Materials: polypropylene, non-woven fabric. Packaging: 50 masks per box. Safety Features. CE–certified. in accordance with the European standard EN14683:2005.

High quality, super white, washable, luxury acrylic based facade paint. Facade paint based on acrylic, made according to Italian technology. The paint is intended for finishing the facades of buildings, application indoors is possible. FEATURES: High-quality acrylic facade paint with high covering power, excellent adhesion and wear resistance, weather-resistant, low water absorption, high degree of diffusion. Resistant to sudden temperature changes from -500C to +500C. The classic acrylic formula allows you to achieve an ideal result and easy handling. COMPOSITION: Acrylic, titanium dioxide, calcium carbonate, water are used in the production of permofacade paint. such as: concrete, brick, plaster. We recommend leveling the surface with PermoMajun finishing putty and saturating it with PermoBinder primer or PermoGrunt deep penetration primer. It is applied with a brush, roller, spray gun. The best result is achieved when applied in two layers, the temperature of the treated surface should not be lower than +5 ° C and not higher than + 35 ° COLORING: Easy to tint by computer or manually. TYPES OF PACKAGING: Plastic buckets weighing 3.5 kg., 6 kg., 10 kg. , 20 kg. Any volumes, in the range of water-based, acrylic, facade paints, primers, etc. Own production, high quality raw materials.

It is made from oxides of aluminum and silicon, with the use of special additives to eliminate defects in the surface of the stone. It is necessary for giving a mirror shine to the surface at the stage of finishing polishing of granite, marble and other types of natural stone, as well as for artificial stones. Due to the shape and hardness of the aluminum oxide monograin, as well as the high dispersion of the powder, the polishing effect is achieved much faster compared to other types of similar products. Average powder consumption: 10-50g/m2 depending on the hardness of the polished material and its pre-treatment. To use, mix the required amount of powder with water to a paste-like mass and apply to the surface to be treated. Buff the paste with a felt nozzle to a final shine. The remains of the polishing material are washed off the treated surface.

Calcium/zinc based stabilizer suitable for the production of rigid PVC pipes. This stabilizer has a sufficient range of effective lubricants, which makes it unnecessary to use additional lubricants in the formulation. This stabilizer has been developed for twin screw extruders and large high pressure pipes. It is the best choice for hygiene products. Form Powder Color White Ash (%) 26±1 Solubility in water Insoluble Application Pressure pipes (6-16 bar) Water supply pipes Potable water pipes Recommended flow rates Depending on formulation, process conditions and product type; 2.5-3.5 parts Standard packaging 25 kg net, in a composite bag

Multi-purpose and economical pigment, mainly used for whitening plastics such as PVC, polystyrene, ABS. Using 0.15 (parts) of this product can reduce the use of titanium dioxide by up to 50% in applications where light fastness is not required. Due to the lower titanium content, the product is less brittle. This grade improves whiteness without the use of other pigments, so it is too economical Chemical-Physical Specification Form Powder Color Blue Moisture (%) Max0.1 Application Various kinds of white PVC products such as pipes, profiles and sheets. Recommended costs Depending on the recipe, process conditions and product type; 0.05-0.25 parts Standard packaging 25 kg net, in a composite bag