Couches, massage tables. - 60004

Description Power Source: USB,Battery,Electric,Power Supply Maximum Time: 90min Size: 15*3*3.5 Material: Metal Model: HI-LSD Blade Material: Stainless Steel Single Hood Size: 20*8*6cm Single Full weight: 0.260 kg

Name: GEEMY Working Time: 180minutes Power Source: Electric Material: Stainless Stel Blade Model: GM6668 Blade Material: Stainless Steel Battery: 2000mAh Li-ion Battery Single package size: 23*22*7cm Single gross weight: 1.100kg

Description Folding aluminum massage table 180 x 60 cm / 70.2 x 23.4 in Why choose BVM tables? All our tables offer the reiki panel on top of the legs, allowing to perform massages with greater mobility, comfort and safety, even when sitting by the headrest or footrest. Our system, unlike other tables on the market, enables correct placement of feet and legs, preventing damage to the ankles and/or knees, making it especially useful for long sessions. Our tables undergo extensive quality controls and continuous improvement. We update the materials and the structures and implement the appropriate measures to continue to offer the best products on the market. All our tables are available in different colours. We offer the widest palette on the market. As a result, you can get the table that best fits your beauty clinic or centre *. * The colour of the actual product may differ slightly from the one displayed on screen. Technical features: Lightweight aluminum folding table. WOODEN reiki panel. Height adjustable up to 6 different positions. High strength metal turnbuckles for stability. High strength leatherette upholstery, water and oil resistant. 4 rubber feet to keep it still when the table is folded. Two high-resistant handles to move the table. Measurements and weight: Length: 180 cm / 70.2 in Length with headrest included: 208 cm / 81.12 in Width: 60 cm / 23.4 in Width with armrest included: 82 cm / 31.98 in Height adjustment: min. 69 cm - max. 84 cm / min. 26.91 in - max. 32.76 in Headrest size: 26 x 26 cm / 10.14 x 10.14 in Profile: 8 cm thick / 3.15 in Weight: 13.4 kg with accessories 11 kg without accessories Load: When in use: 120 kg Accessories included: High quality transport bag with 1 pocket Padded articulated headrest Armrest tray Two extending side arms

Description Paedriatic couch made in chromed steel tube, skay upholstery and adjustable headrest heigth.   Description: Steel structure, chromed Skay upholstery Adjustable headrest heigth Colours: black or white skay Dimensions: Length: 125 cm / 48,8 inWidth: 50 cm / 19,5 inHeight: 80 cm / 31,2 in

Description Basic 2-section fixed stretcher made of steel with excellent performance, great lightness and versatility. Characteristics: White steel structure. Backrest adjustable up to 70º. Orifice and facial plug. Light and highly stable. Technical data: General measurements (cm): 69 (height) x 62 (width) x 186 (length) Weight: 28 kg, approx. Maximum weight supported: 120 kg.

Class B autoclave with capacity of up to 18 litres. It is ultra-quiet and really easy to use. Its automatic operating is configured with different sterilization programmes. With door locking to prevent it from opening accidentally.   Description Autoclave 18 litres Class B with USB.  Reference Printer Programme liquids 922-STE-B18D No (optional accessory, it is sold separately. If you wish to purchase it, look for the reference 922-PRINTER04). Yes   Programmes: Programmes Temperature Pressure Sterilising time Overall time Type Max load Max load per tray Solid 134 ºC 210 kPa 4 min 20-35 min Solid unwrapped material  4.5 Kg 1.2 Kg 121 ºC 110 kPa 20 min 30-50 min Wrapped 134 ºC 210 kPa 4 min 30-50 min Solid unwrapped material 4.5 Kg 1.2 Kg 121 ºC 110 kPa 20 min 35-55 min Solid or hollow material simple wrapped 3.5 Kg 1.1 Kg Liquids 134ºC 210 kPa 10 min 30-55 min Liquid 1 Kg 0.3 Kg 121ºC 110kPa 30 min 35-60 min Textile 134 ºC 210 kPa 8 min 40-65 min Porous unwrapped material 1 Kg 0.3 Kg Porous material simple wrapped 0.80 Kg 0.25 Kg Porous material double wrapped 0.6 Kg 0.2 Kg 121 ºC 110 kPa 30 min 45-75 min Hollow material simple wrapped 3.5 Kg 1.25 Kg Solid or hollow material double wrapped 1.5 Kg 0.6 Kg Prion 134  ºC 210 kPa 18 min 45-70 min  Porous unwrapped material 1 Kg 0.3 Kg Porous material simple wrapped 0.75 Kg 0.25 Kg Porous material double wrapped 0.6 Kg 0.2 Kg Hollow material simple wrapped 3.5 Kg 1 Kg Solid or hollow material double wrapped 1.5 Kg 0.5 Kg Test B&D 134  ºC 210 kPa 3.5 min 22-35 min - - - Test Helix 134  ºC 210 kPa 3.5 min 22-35 min - - - Vacuum test - - - 15-20 min - - - The minimum time required autoclave to be ready for use after connecting is 5 minutes. The max.  temperature for the sterilisation cycle of 134 ° C is 137 ºC The max. temperature for the sterilisation cycle of 121 ° C is 124 ° C Features: Fully automatic with pre-programmed sterilisation cycles. Chamber and door in stainless steel with electro-polished finish. High precision control system for perfect sterilisation results. User friendly interface. LCD screen displays information about the process continuously. Open type water tank, this feature makes it easy water filling and cleaning the tank. Optional printer (not included. Reference 922-PRINTER04). Languages: Spanish, English, German, French, Italian, Dutch, Polish, Romanian, Czech, Latvian, Lithuanian, Hungarian and Chinese. Safety devices: Breaker. Protect your computer from any possibility of failure in the power supply. Action: Interrupt the power supply. Thermal circuit breaker. Protection against short circuits and possible overheating in the transformer primary network. Action: Temporary interruption (until the temperature has dropped) in the winding. Safety valve. Protection against a possible increase in pressure within the chamber. Action: Escape steam until the restoration of a normal pressure level. Micro switch to control the state of the door. Exercises control in adjusting the door to start a sterilisation cycle. Action: Transmits signal to alert the incorrect position of the door. Thermostat for heating elements in the steam generator. Protection against possible overheating in the heating elements in the steam generator. Action: interrupts the power supply to the heating elements in the steam generator. Thermostat for heating elements in the chamber. Protection against possible overheating in the heating elements in the chamber. Action: interrupts the power supply to the heating elements in the chamber. Auto leveling hydraulic system. The hydraulic system pressure returns to its natural if the sterilization cycle is interrupted manually. Action: the internal pressure is restored automatically. Door Lock Effective to prevent accidental opening of the door protection. Action: Prevents door opening by a hydraulic locking system. Technical features: Nominal Voltage: 220-240V; 50/60 Hz; 10A Chamber dimensions: 247 x 350 mm Breaker: F16A / 400V Nominal power: 2200VA Sterilisation temperature: 121 ° C / 134 ° C Capacity distilled water tank: 2.5 L approx. Operating temperature: 5 ° C / 40 ° C Operating relative humidity: Max. 80%, non-condensing External dimensions: 480 x 455 x 600 mm Net weight: 47 Kg Max noise level: <70 dB Operating atmospheric pressure: 76/106 kPa Components: Distilled water tank LCD display Control panel Main switch Drain valve for distilled and used water USB port Safety valve Ventilation grid Lock system Power cable Rating plate Accessories included: Steriliser Three trays of instruments Base for trays Extraction handle Tool for door adjustment 2 drain hoses Door gasket User manual Optional accessories and spare parts: Printer for autoclave (ref. 922-PRINTER04) and paper roll for autoclave printer (ref. 534-ROLLPAPER). Autoclave process step by step: 1- Open the door, take the tools and accessories that are within the sterilisation chamber, remove the wrapper and clean them.2- Plug the power cord to a suitable power source.3- Plug the printer (optional accessory, it is sold separately. If you wish to purchase it, please look the reference 922-PRINTER04).4- Switch on: The main switch is located on the right bottom in the front panel.Once activated, the LCD screen is on, where basic operation icons of the steriliser appear, such as the position of the door, the water level, the sterilisation programme, date, time, etc.5- Fill tank with distilled water.Remove the top lid and fill, if you hear a signal, it means that you exceeded the permitted level of water in the tank, please stop immediately and drain the amount of water necessary for the signal off.6- Preparation of material to be sterilised:Place instruments that are of different materials in different trays, however take care to separate them before sterilisation.If the instruments are not stainless steel, put some sterilisation paper between the tray and the instruments.Do not allow direct contact between instruments of different materials.Verify that all instruments are in correct position.Place on tray instruments such as lenses, containers, tubes, etc. inverted, so that water does not stagnate within them.Do not overload the trays above their limit.Do not overlap the trays on top of each other, or put them in direct contact with the wall of the sterilisation chamber.Do not use metal clips or pins, this may impair the operation of the steriliser.7- Select the sterilisation programme.8- Start the sterilisation cycle.After selecting the sterilisation programme, insert instruments into the chamber through the trays, using the supplied plastic handle.Once the instruments are within the chamber, close the door.Caution: Be sure to close the door, otherwise the steriliser displays an alarm and can not start or stop the programme during the cycle.9. Start the sterilisation programme.Press the start button, then the steriliser start operating during approximately between 30-75 minutes.10-After the sterilisation cycle.After completion of the sterilisation cycle, the printer will print the full report automatically (optional accessory with reference 922-PRINTER04)After the pressure drops to zero, you can open the door and remove the instruments. The steriliser alerts by a beep once the sterilisation cycle is completed.Caution: Whenever you remove instruments, use the supplied plastic handle for supporting trays. IMPORTANT: Do not reuse waste water. Installation: There must be at least 10 cm of free space around the sterilizer, 25 cm at the top, and enough room for the door to open. The place where you use the steriliser must have adequate ventilation. The steriliser must be placed on a stable surface and at an adequate height for handling. Do not cover or block the side outlets or outlet grille air condenser fan. Do not place the steriliser near water sources where it can be splashed. Keep away from heat sources. Example of a printed report: * The printer is an optional accessory and is sold separately. If you wish to purchase it, please look for the reference 922-PRINTER04. ================================Programme: WRAPPEDTemperature: 134CPressure: 206.0 kPaDrying time: 08minSterilisation time: 4.0Min--------------------------------Time Temp. pressureStart 12:28:17 089.0CT1: 12:31:32 087.1C -075.0kPaT2: 12:33:43 110.2C 052.0kPaT3: 12:36:37 088.9C -080.0kPaT4: 12:39:20 114.7C 053.7kPaT5: 12:43:37 087.9C -080.0kPaT6: 12:50:40 134.8C 206.0kPaTS: 134.7C 209.5kPaMax. Temperature: 135.2CMin. Temperature: 134.3CMax. Pressure: 214.0kPaMin. Pressure: 204.9kPaT7: 12:54:39 134.4C 211.4kPaT8: 12:57:36 102.1C -060.0kPaT9: 12:59:54 098.2C -060.0kPa13:04:07 End 102.4C--------------------------------Cycle No .: 00017Result: successDate: 07/06/2014SN: E54723operator:================================ Regulations: 93/42/EEC Medical Device Directive. 97/23/EEC Pressure Equipment Directive. EN 13060 Small steam water steriliser. EN 61326, EN 61000 Electromagnetic compatibility. EN 61010-1, UL 61010-1 Safety requirements. EN 61010-2-040, IEC 61010-2-040 Specific requirements for steam sterilisers used for treatment of medical materials.  In the UK this product needs to be inspected and certified anually. BVM Medical  offer this service We do however have a technical service based in Spain to cover the product during the warranty period  

Description: The new Panther tattoo chair, for tattoo parlors, with many mobile and adjustable elements, allowing you to take the best position in any situation, both for professionals and for their clients. This is a high quality product with a fantastic value for money that guarantees the best service for your customers. Features: Steel frame with chrome finish. Height adjustment by hydraulic system. 360º swivel with locking system Backrest tilt from 0º to 85º. Headrest with soft insert and additional support. The armrests are adjustable in height, swivel, tilt and distance from the seat. Adjustable footrests for tilt, opening and extension. Low maintenance black upholstery. Very comfortable memory foam padding. Specifications: General dimensions of the chair (min/max in cm): 188/214 (length) × 62/102 (width) × 67/82 (height). Padding: 8 cm, foam. Artificial leather: PVC. Back height: 86 cm. Seat width: 62 cm. Seat length: 64 cm. Maximum width: 102 cm. Leg section length: 63-76 cm. Leg section width: 25 cm. Maximum load capacity: 150 kg. Chair weight: 62 kg.

As face and body oil designed to moisturize and nourish your dry and coarse skin with jojoba, it is smoothly absorbed into the skin and keeps it moist and healthy. Product Benefits: 1. Deliver moisturizing and rich nutrition with Jojoba essential blending; 2. Moist massage oil is gently absorbed into the skin, making the skin elastic and shiny; 3. Jojoba seed oil and olive oil prevent moisture evaporation, make the skin moist and smooth for a long time; 4. Premium essential massage oil to moisture for dry and rough skin. 

Idebenone massage cream, brightening dull skin. The powerful antioxidant ingredient idebenone and five different vitamins reduce impurities and pigmentation and make the skin clean and clear. In addition, five different hyaluronic acids keep your dry and coarse skin moist and smooth. Product Benefiits: 1. Massage cream for bright and clear skin; 2. Containing Idebenone and Vitamins, dull and uneven skin tone turn into bright.

Herbal massage cream designed to soothe sensitive skin. Containing chamomile, lavender and jasmine, this cream soothes sensitive skin and skin irritations and keep the skin smooth and healthy. In addition, eucalyptus extract having anti-inflammatory effects strengthens immunity and eases skin irritations. Product Benefits: 1. Massage cream for sensitive skin; 2. Contains herbal complex to soothe and calm down sensitive and troubled skin; 3. Using eucalyptus leaf extract it soothes and moisturizes irritated skin to keep the skin healthy. 

Collagen known as the structural protein found in the skin slows down skin aging, and elastin makes the skin firm and supple. In addition, five different hyaluronic acids keep yor dry and coarse skin moist and smooth. Product Benefits: 1. Efficient elasticity massage cream; 2. Contains collagen to help the sagging skin to look firmer and tighter; 3.Five kinds of hyaluronic acids increases moisture retention to make the skin radiant and elastic. 

Size: 120x140 cm.Material: 100% polyester.Pack: 12 pieces. The smooth and soft surface allows the hair to glide easily and not stick. It uses an elastic band fixation method and special stainless steel clips that can be adjusted to prevent cut hair from getting on the body and clothing. which is more comfortable and durable than straps and Velcro. Very comfortable and practical classic peignoir (cape for haircuts). Cape hairdresser wholesale, for haircuts with elastic band and hooks color black