Electrical equipment and parts in bulk on Qoovee

Specification: Size: Φ250 x H250mm. Light source: E27. Bluetooth LED lamp. Input voltage: 100-240VAC. Color temperature: RGB + CCT (3000-6000K). Material: aluminum, polycarbonate. Cord length: 1.2m Lamp light: 9W Since 2002, HEP Group has been innovating and manufacturing environmentally friendly, energy efficient, sensitive electronic lighting control products for industrial and commercial applications, including LED drivers, electronic ballasts, track lights, etc. .d.

Specification: 1. Dimension: Φ 59 x 70 mm (Phi) 2. Consumed Power: 12 W. 3. Input Voltage: 100-240 Vac. 4. Color Temperature: 2700K~6500K. 5. CRI > 90. 6. Luminous Flux: 800 lm. 7. Material: Aluminum, Polycarbonate. 8. Beam Angle: 24˚. Since 2002 HEP Group has engaged in innovating and manufacturing environment-friendly, energy-saving, delicate electronic lighting control gears for industrial and commercial purposes, including LED driver, electronic ballast, track light, etc.

LAC20W600N-1C UNI. Description: 0/1 - 10 V dimmable LED Driver for constant current 100 / 200 / 350 / 400 / 500 / 600 mA. Average service life 50,000 h. Easy and fast output current setting via NFC. Operating ambient temperature -20°C - +50°C. Protection: 1. Short & open circuit proof. 2. Auto. overheat regulation or cut off. 3. Overload protection. 4. SELV Since 2002 HEP Group has engaged in innovating and manufacturing environment-friendly, energy-saving, delicate electronic lighting control gears for industrial and commercial purposes, including LED driver, electronic ballast, track light, etc.

Automatic self-test function, test button and status indicator. Suitable for constant current LEDs. Deep discharge protection. Protection against short circuit and open circuit. Connecting plug with reverse polarity. Average service life 50,000 h. Network identification and switching voltage adjustment. Maximum LED driver open circuit voltage 120V. Maximum LED driver output current 1A. At intervals of approximately 3 months, the battery is automatically discharged and recharged.

SCL254-58 UNI. Description: Warm start with automatic identification of lamp type. Automatic restart after lamp replacement. Constant light flux independent of mains fluctuations. Operating ambient temperature -25°C - +60°C. Protection: 1. End of Life Protection; 2. Short & open circuit proof; 3. Auto shutdown in case of lamp failure.

LERC200W5600CALRP. Description: DC output with constant current 3700-5600 mA. Average service life 50,000 hours. Operating ambient temperature from -40°C to +85°C. Typical output current ripple LF ±5%. Protection: 1. Protection against short circuit and open circuit; 2. Automatic. regulation or shutdown in case of overheating; 3. Overload protection. Since 2002, HEP Group has been innovating and manufacturing environmentally friendly, energy-saving and sensitive electronic lighting control products for industrial and commercial applications, including LED drivers, electronic ballasts, track lights, etc.

Plafonds in a large assortment. Made in Uzbekistan together with China.

The main advantages of the R3-Ts metal hose: - Protection of wiring from mechanical damage. — Protection against ignition at short circuit. — Flexibility of a metal hose provides convenience of installation without additional accessories and devices. - Protection of the cable inside the metal hose from kinks. - It is an electromagnetic interference shield. — Protection against rodents. - Recommended for laying power supply systems on combustible surfaces, including wood. — Application in industrial installations for transportation of coarse bulk solids is possible. Main Material Galvanized steel strip internal diameter 7.8 mm Max. ext. diameter 11.6 mm Minimum working radius 40 mm Length in coil 100 m Coil height 28 cm Coil diameter 29 cm Coil weight 9 kg operating temperatures from -40 to +100 °C

Description: 1. Lighting draws attention to your marketing message. 2. Single sided only 3. LEDs have a long lifespan and low maintenance. 4. Easy to insert and easy to pull out. 5. Waterproof. Certification: IP67. 6. Our products are available with DC 12V. We also provide UL approved power supply. 7. Custom Specifications: 1. Overall frame size: Can be combined with outdoor light box: LGS model 2. Recommended size: less than 60x120cm 3. Standard size, custom size 4. Illuminated graphic image size -- 5. Visual area - - 6. Thickness -- 7. Guide frame width -- 8. Weight -- 9. Material: aluminum profile plus iron materials 10. Finish: anodizing plus paint protection 11. Frame color: black and customized 12. Lighting type: LED with side light (with LGP) 13.Color temperature: 7000K (white light) 14.Adapter output:Fit to size Application:For mobile coffee kiosks Outdoor exhibition promotion Roadside shop display

Model: Insert A-frame label holder Application: Suitable for indoor and outdoor use. A great way to grab attention when you want to display images, photos, posters, menus, marketing ads, promotions, and important messages. It can be used in a multi-purpose environment, whether it is your workplace, office, markets, cafes, restaurants, shopping malls, cinemas, theaters, etc. Description 1. Folding frame design 2. Double-sided viewing 3. Two anti-glare pads included graphics protection. 4. Suitable for indoor and outdoor use. 5. When used outdoors, it is recommended to use weather-resistant materials. 7. Made in Taiwan. Specifications 1. General frame size Standard size, custom size 2. Material: iron, plus acrylic coatings 3. Finish: metallic paint 4. Frame color: black and customized 5. Lighting type: NO Light

Model: LSS (Desktop) Application: Advertising novelty Art gallery and museum for art display Description: 1. Possibility to display portrait or landscape. 2. Includes a removable acrylic tabletop easel. 3. Stand on a tabletop. 4. Magnetic loading panel. 5. Edge-Lit Acrylic Panel. 6. 1 year manufacturer's warranty. 7. Made in Taiwan. Specifications: 1. Overall frame size Standard size, custom size 2. Backlit graphic size -- 3. Viewing area -- 4. Thickness 8mm 5. Guide frame width -- 6. Weight -- 7. Material: Acrylic 8. Finish: clear 9 10. Lighting type Edge-lit LED (with LGP) 11. Color temperature 7000K (white light) 12. Adapter output by size 13. Orientation Horizontal or vertical position

Model: (Wall Mounted) Application: Sign board for coffee shop Logo sign for retail shops Description: 1. Plastic round corner. 2. Works as both countertop or wall hanging frame. 3. Designed for outdoor or indoor. 4. Square Edge Lit Light Box. 5. Opal acrylic panel with backlit illuminating LED – shines your graphic with light inside the edges of light box. 6. Side mounting. Specifications: 1. Overall Frame Size Standard Size, Custom Size; 2. Backlit Graphic Size -- 3. Visual Area -- 4. Thickness 40mm 5. Frame Rail Width 20mm; 6. Weight 7. Material Aluminum Extrusion Plus Plastic Round Corner 8. Finish Anodized; 9. Frame Color Black and Customized; 10. Light Type Edge-lit LED (With LGP); 11. Color Temperature 7000K (White Light); 12. Adapter Output By dimension; 13. Orientation. Mounts horizontally or vertically.

Mode: LGS 60120S (639x1239mm) Application: These LED illuminated outdoor wall-mounted signs are ideal for capturing the attention of consumers in front of retail stores, airports, offices, gas stations, hotels or restaurants. Description: 1. Display this light box vertically or horizontally depending on the drainage hole. 2. With a sturdy aluminum construction and waterproof design, this LED frame can effortlessly stand up for high traffic areas. 3. Designed for outdoor. 4. Included the wall mounting hardware and the protective PC cover. 5. Our two standard colors are anodized silver and black,and we can also make any color with larger quantities. 6. Fast graphic changes, simply flip open sides, insert graphics, and snap closed 7. Made in Taiwan. 8. Made to order, any size. Custom sizes up to 120cm x 240cm. Specifications: 1. Overall Frame Size 639x1239mm; 2. Backlit Graphic Size 623x1223mm; 3. Visual Area 579x1179mm; 4. Thickness 25mm; 5. Frame Rail Width 30mm; 6. Weight 8.0 kg; 7. Material Aluminum Snap Frame; 8. Finish Anodized; 9. Frame Color Silver and Black and Customized; 10. Light Type Edge-lit LED (With LGP); 11. Color Temperature 7000K (White Light); 12. Adapter Output 12V/27W; 13. Orientation Mounts horizontally or vertically.

Model: A-Rack Application: For mobile coffee stands Retail shop display stands and cases Description: 1. The ultra-thin lightbox is embedded in the A-frame display, the integrated design highlights the quality of product texture. 2. It can be matched with single-sided or double-sided lightbox which provides greater diversity and flexibility for applications. 3. Easy in, easy out slide-in sign holder. 4. Sign thickness can be up to 39mm thick. 5. Integratted Design. 6. Magnetic design. 7. Designed for indoor. Specifications: 1. Overall Frame Size Standard Size, Custom Size; 2. Backlit Graphic Size -- 3. Visual Area -- 4. Thickness 39mm; 5. Frame Rail Width; -- 6. Weight --7. Material Aluminum Extrusion Plus Iron Materials; 8. Finish Anodizing Plus Paint Protection; 9. Frame Color Black and Customized; 10. Light Type Edge-lit LED (With LGP); 11. Color Temperature 7000K (White Light); 12. Adapter Output By dimension.

Model: LSS (Wall Mounted) Application: Cosmetic or jewelry display shelves and cabinets Interior design for hotels or restaurants or office Description: 1. Able to display a portrait or landscape. 2. With standoff hardwares and mounting kit for displaying easily. 3. Removable acrylic table stand allows to be displayed on the wall. 4. Magnetic loading display panel. 5. With a slim depth, these low profile edge-lit signs are a great alternative. 6. 1 year manufactures warranty. 7. Made in Taiwan. Specifications: 1. Overall Frame Size Standard Size, Custom Size 2. Backlit Graphic Size -- 3. Visual Area -- 4. Thickness 8mm; 5. Frame Rail Width -- 6. Weight -- 7. Material Acrylic 8. Finish Clear; 9. Frame Color Clear; 10. Light Type Edge-lit LED (With LGP); 11. Color Temperature 7000K (White Light); 12. Adapter Output By dimension; 13. Orientation Stand horizontally or vertically.

Model: LIS 60120S (618x1215mm)   Application: Menu boards or new item advertisements Trade show displays Art gallery and museum for artistic display   Description: 1. 618mmx1215mm  portrait or landscape. 2. LED Lighting is a cost-efficient low voltage energy-saving technology. 3. Laser engraving light guide plate. 4. Made in Taiwan. 5. Our two standard colors are anodized silver and black, and we can also make any color with larger quantities. 6. Fast graphic changes, simply flip open sides, insert graphics, and snap closed. 7. Designed for indoor. 8. Made to order, any size. Custom sizes up to 120cm x 240cm.   Specifications: 1.         Overall Frame Size      618x1215mm 2.         Backlit Graphic Size     602x1199mm 3.         Visual Area  558x1155mm 4.         Thickness    20mm 5.         Frame Rail Width 30mm 6.         Weight 5.3kg 7.         Material      Aluminum Snap Frame 8.         Finish  Anodized 9.         Frame Color Silver and Black and Customized 10.     Light Type   Edge-lit LED (With LGP) 11.     Color Temperature     7000K (White Light) 12.     Adapter Output  12V/27W 13.     Orientation Mounts horizontally or vertically

Application: Logo for shop Description: 1. Round corner design. 2 .Ideal for retail stores, hotels, legal firms and medical centres. 3. Double sided. 4. Stand on the countertop. 5. Able to display indoor or outdoor. Specifications: 1. Overall Frame Size. Standard Size, Custom Size; 2. Backlit Graphic Size -- 3. Visual Area; -- 4. Thickness 40mm; 5. Frame Rail Width 20mm; 6. Weight; -- 7. Material Aluminum Extrusion Plus Plastic Round Corner; 8. Finish Anodized; 9. Frame Color: Black and Customized; 10. Light Type Edge-lit LED (With LGP); 11. Color Temperature 7000K (White Light); 12. Adapter Output. By dimension; 13. Orientation Mounts horizontally or vertically.

Model: LCS 2129 (210x288mm) Application: Menu boards / new item advertisements. Trade show displays. Retail shop display stands and cases. Description: 1. Able to display a portrait or landscape picture on both countertops. 2. Removable acrylic table stand. 3. LED Light is energy efficient and lasts longer than ordinary bulbs. 4. Made in Taiwan. 5. Designed for indoor. 6. 1 year manufactures warranty. Specifications: 1. Overall Frame Size 210x288mm 2. Backlit Graphic Size 208x283mm 3. Visual Area 208x266mm 4. Thickness 15mm 5. Frame Rail Width -- 6. Weight 1.2kg; 7. Material Aluminum Extrusion Materials Customized; 10. Light Type Edge-lit LED (With LGP) 11. Color Temperature 7000K (White Light); 12. Adapter Output 12V/4W; 13. Orientation. Stand horizontally or vertically.

Backlights, LEDs in the best quality guaranteed. Made in Uzbekistan together with China.

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display. Specifications:   Rated power, VA 30000     Maximum current, A 40     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 34х26,5х113,5     Weight, kg. 102

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display. Specifications:   Rated power, VA 20000     Maximum current, A 27     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 32х26,5х59     Weight, kg. 60

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display. Specifications:   Rated power, VA 15000     Maximum current, A 20     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 32х26,5х59     Weight, kg. 50

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display Specifications:   Rated power, VA 9000     Maximum current, A 12     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 29х23х52     Weight, kg. 33 Application areas: - in all cases where non-standard voltage is required; - used in industries where temperature control is required; - as an additional device for transistor recorders, machine tools; - in scientific laboratories; - on the productions involved in the design and adjustment of TV receivers and other household appliances; - when testing fuses, regulation of relays, circuit breakers, current limiters, etc.; - in the oil and other industries.

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display. Specifications:   Rated power, VA 6000     Maximum current, A 8     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 26х20,5х50     Weight, kg. 26

Three-phase automatically transformers (variac transformers) with a range of output voltage control from 0 to 430 Volts with an LCD display. Specifications:   Rated power, VA 3000     Maximum current, A 4     Operating input voltage range, V 0-380     Nom. output voltage range, V 0-430     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 18х25х37     Weight, kg. 22   Three-phase Variac transformer SUNTEK is a powerful and reliable device that is indispensable in production, in workshops and factories. Meter scale and digital voltmeter contribute to the simplicity and ease of operation. The metal case protects the autotransformer from mechanical damage. The main difference between laboratory autotransformers and conventional ones is that the mobile contact in the winding allows changing the number of turns included in the circuit and thus makes it possible to set the voltage in a wide range, for example, in a single-phase network – from 0 to 300 V, in a three-phase – from 0 to 430 V. the change in The number of turns occurs smoothly, so it is possible to obtain the most accurate voltage values and a pure sine wave at the output. In addition, this device is lighter and more compact than analogues made according to the traditional scheme, and has a much greater efficiency (up to 98%). To control the operation of the control panel has a voltmeter and ventilation grilles in the body contribute to the natural cooling of the device and prevent overheating.

The variac transformer SUNTEK RED 5000VA is a single-phase device with an LCD board that operates on 220 V mains and is used to permanently hold a given output voltage. Operating range variac transformers 0-300 volts. Rated current 20 A. Specifications:   Rated power, VA 5000     Maximum current, A 20     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 25х31х28     Weight, kg. 17   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

The variac transformer SUNTEK RED 2000VA is a single-phase device with an LCD board that operates on 220 V mains and is used to permanently hold a given output voltage. Operating range variac transformers 0-300 volts. Rated current 8 A. Specifications:   Rated power, VA 2000     Maximum current, A 8     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option plug/socket     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Overall dimensions h-v-cm 19х20х18     Weight, kg. 8   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

The variac transformer SUNTEK RED 1000VA is a single-phase device with an LCD board that operates on 220 V mains and is used to permanently hold a given output voltage. Operating range variac transformers 0-300 volts. Rated current 4 A. Specifications:   Rated power, VA 1000     Maximum current, A 4     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option plug/socket     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Overall dimensions h-v-cm 19х20х18     Weight, kg. 6   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

The variac transformer SUNTEK RED 500VA is a single-phase device with an LCD board that operates on 220 V mains and is used to permanently hold a given output voltage. Operating range variac transformers 0-300 volts. Rated current 2 A. Specifications:   Rated power, VA 500     Maximum current, A 2     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option plug/socket     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method plug/socket     Housing metal     Overall dimensions h-v-cm 14x13x15     Weight, kg. 3.5   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 30000     Maximum current, A 120     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 39.5х32х113.5     Weight, kg. 107   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 20000     Maximum current, A 80     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 39.5х32х56     Weight, kg. 60   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 15000     Maximum current, A 60     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 39.5х32х56     Weight, kg. 53   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 10000     Maximum current, A 40     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 29x25x40     Weight, kg. 33   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  The use of imported instruments and equipment powered by voltage other than 220 Volt is impossible without a source of operating voltage. Variac transformer (laboratory autotransformer) with adjustment allows you to save the owners of machinery and equipment from the headache of finding a universal solution to the problem (the desired voltage), as it allows you to get 10 and 70 and 110 and 150 Volts with a slight movement of your hand, up to 300 Volts AC 50 Hz frequency of different current (up to 50 Amps) by adjusting the Variac transformer to the desired voltage. Variac transformers SUNTEK with adjustable output from 0 to 300 volts are available for different capacities.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 7000     Maximum current, A 28     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 25x25x27     Weight, kg. 19   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Automatically transformers (variac transformers) are used to smoothly adjust the AC voltage in various works related to electrical engineering. They are most often used to change the voltage in household appliances, construction. Specifications:   Rated power, VA 5000     Maximum current, A 20     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 25x25x27     Weight, kg. 17   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Specifications:   Rated power, VA 3000     Maximum current, A 12     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 20x21x23     Weight, kg. 10   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Specifications:   Rated power, VA 2000     Maximum current, A 8     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 19x18x21     Weight, kg. 8   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Specifications:   Rated power, VA 2000     Maximum current, A 8     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 19x18x21     Weight, kg. 8   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.  

Specifications:   Rated power, VA 500     Maximum current, A 2     Operating input voltage range, V 0-250     Nom. output voltage range, V 0-300     Output voltage error,% less than 1%     Warranty 2 years     Distortion sine wave missing     Connection option terminals (connection kit)     Operating range t ° C -5 - +50     Cooling passive     Network Connection Method terminals     Housing metal     Overall dimensions h-v-cm 14x13x15     Weight, kg. 3.5   Variac transformer is a type of transformer. The two windings in this device are directly connected to each other. As a result, between them there are two types of communication, one of which is electromagnetic, and the other electric. The coil has several pins with different voltage output values. The difference from conventional transformer is increased efficiency, due to partial change in power. The autotransformer in our time has found wide application both for industrial purposes and in everyday life. Variac transformer (laboratory autotransformer with manual adjustment) - the need of any radio amateur, allows you to find out the technical characteristics of radio elements, chips, devices and homemade products. Find out the exact characteristics and behavior at different voltages, currents, temperatures will allow experiments and measurements carried out with the help of Variac transformers of low power (test relays, capacitors, microcircuit, working circuit, etc.). Variac transformer SUNTEK with adjustable output voltage from 0 Volt to 300 Volt with LCD display, displaying the output voltage as accurately as the switch variac transformer, is indispensable in these cases.

Specifications:   Rated power, VA 20000     Maximum current, A 100     Input voltage range, V 90 - 285     Output voltage range, V 220+/- 8%     Stabilization type relay     Accuracy output voltage,% 8     Adjustment stepwise     Distortion sine wave no     Operating range t ° C -30 - +50     Cooling forced     Network Connection Method terminal block     Housing metal     Protection against short circuit +     Lightning protection +     Overall dimensions, cm 48x32x21     Weight, kg. 31   220 Volt voltage stabilizer for summer cottage, country house, car service, farm, production - the need for the realities of existing power grids. There are regions in the world where low voltage is inconceivable and there are regions where the voltage is very high (over 260 volts). The relay type stabilizer 20000 Va of the "Platinum" series has been developed taking into account this situation and works with the stated characteristics in the input voltage range from 100 to 285 Volts. The stabilizers of this series, 11000VA, 12500VA, 16000VA and 20000VA, are distinguished by their reliability, increased service life, and improved characteristics. Designed for those cases when you really need to increase the voltage to 220V in a network with a voltage of 100-190 volts. Platinum series models do not have a bypass, as at low input mains voltage (below 180 volts) it is dangerous to switch on the equipment without stabilization. The "Platinum" series has been developed and put into mass production for countries with problem low voltage, for those who have a standard version of stabilizers cannot solve the problem of increasing the voltage while maintaining power. When installing these stabilizers should take into account the current, which increases in the wiring, you should choose the correct cross-section of conductors, connecting buses, terminals, machines. A distinctive feature of the series of SUNTEK Platinum relay stabilizers is a bipolar automatic machine, which allows to increase the reliability of the stabilizer, to reduce the effect of transients and high currents on the plates of the automatic machine. Relay stabilizers SUNTEK - stabilizers that do not require maintenance during operation, simple and reliable in operation, the lifetime of the installed relays is at least 10 years. Distinctive features: Universal metal case (mounted and floor)New Holtek MicrocontrollerDigital display (displays input, output voltage)Forced cooling - 2 (two) built-in fansWide operating range (90-285 volts)Double-pole automatic on-off switchInstant response time to change in input voltageHigh accuracy of stabilization (in the working range of 5%, in the allowable - up to 8%)Automatic delayAnalysis of the input voltage at any timeAnalysis of the boundaries of the working rangeShort circuit protectionOverload protection (overheating)Undervoltage protectionOvervoltage protectionEfficient smoothing of impulse noise in the networkOperating temperature from minus 30 to plus 50 C3 year warranty