Open chat

All Electrical equipment and parts suppliers from China

Grand SCM Co. Ltd
Шеньчжэнь, China
Specify the price USD 0 0
wholesales of fixtures, chandeliers, floor lamps, etc. from China
USD 10.0 - 100.0/pcs
1.High Voltage DC-LINK Capacitor The capacitor uses secure metallized film,unique flattening and welding process,advanced shock pressure and equalized current pressure design, which ensure the stability and precision of the capacity, low the inductance, greatly improve the resistance of high voltage and inrush current .It is used in DC-Link filter circuits which can replace electrolytic capacitor.The equivalent series resistance of it is low.In addition, it is able to withstand high ripple current. 2.Applications (1)Used in wind power,solar power or other industrial frequency converters. (2)Used in DC support filter circuit. (3)Used in Ac electric locomotive、Subway light rial locomotive、Wind power、 Solar power or other industrial frequency converters ,etc.
USD 1.0 - 10.0/pcs
1.CBB15 CBB16 Welding Inverter DC Filter Capacitor This type of capacitor can be used as intermediate circuit for dc connection and harmonic filter.Meanwhile, it can also be used as the embedded and absorbing capacitor in the control circuit. Through special vacuum evaporation process, the coating film has different thickness in different positions. The special structure of the metallized coating makes the healing property and series resistance more reasonable, and the actual structure makes the performance of the capacitor more thoroughly. The equivalent series resistance of it is low.Besides, it is able to withstand high ripple current and high current impulse. 2.Applications (1)Used in filter,absorption,blocking,resonance circuits of high-frequency switching power supply. (2)Widely applied to EMI,such as high frequency welding inverter,UPS,electric vehicles,etc.
USD 100.0 - 1000.0/pcs
1.Energy Storage,Pulsed,DC-Link Filter Capacitor The capacitor can be charged in a long time and discharged in a very short time, thereby creating a huge pulse of power. The pulse power is obtained by charging the pulse capacitor bank.Then, the pulse capacitor bank is charged by charging device with small power for a long time before the experiment, and the shock discharge is only tens of milliseconds, which greatly improves the economic efficiency. Furthermore,it has resin filled,self-healing property,long life time and good high frequency characteristics. 2.Applications (1)Used in rail transit traction or ship drive converter. (2)Used in various high-power industrial inverters,such as high-voltage variable frequency drive device. (3)Used in power harmonic governance and SVG equipment.
USD 1.0 - 10.0/pcs
1.CBB60 AC Motor Start and Run Capacitor The CBB60 capacitor has a cylindrical aluminum case , riot gear and solder structure.The bottom of the capacitor can also be bolted and drawn out with flexible wires .The capacitor has small size, light weight and good self-healing. It adopts zinc-aluminum edge thickening evaporation process, so it has excellent electrical performance and high reliability. The unique sophisticated technology enables the capacitor to withstand large surges and high voltages.It is suitable for the frequency of 50Hz/60Hz ac single phase motor to start and run power. The shape of the motor capacitor is cylindrical,ABS or PBT  plastic enclosure. It has self-healing property,good stability and reliability. 2.Applications (1)Widely applied to the starting and running of AC single-phase motors at 50Hz/60Hz frequency power. (2)Used for Washing machine、Refrigerator、Water pump,etc.
USD 1.0 - 10.0/pcs
1.CBB61 AC Motor Fan Capacitor CBB61 Capacitors are rectangular in shape and are called metallized polypropylene film capacitors.It is based on polypropylene film capacitor dielectric,plate is coated on the film on a very thin layer of conductive material ,generally aluminum or galvanized aluminum ,and then wound.The two ends of the wound core are sprayed with molten metal as capacitance leads,so the inductance of the capacitance is small.One of the biggest characteristics of it is self-healing property,it will not occur capacitor internal short circuit. 2.Applications (1)Widely applied to the starting and running of AC single-phase motors at 50Hz/60Hz frequency power. (2)Applied to electric fan,air condition blower,ventilator,etc.
USD 1.0 - 3.95/pcs
1.CBB65 AC Motor Capacitor The CBB65 Ac Motor Capacitor adopts zinc-aluminum edge thickened metallized polypropylene film as the electrode and the dielectric. It is tightly rolled by high speed winding machine, sealed by aluminum shell, and impregnated with refined castor oil at high temperature to keep it in a vacuum state. Therefore, the capacitor can be more stable, longer life.What’s more,it adopted the second generation of mechanical explosion-proof design, so the reliability is very higher. It is suitable for the frequency of 50Hz/60Hz ac single phase motor starting and operating power. Besides, it also suitable for high power lighting lamps and lanterns of power factor compensation. 2.Applications (1)Widely applied to the starting and running of AC single-phase motors at 50Hz/60Hz frequency power. (2)Applied to air conditioner,refrigerator,electric generator,cleaning machine,etc.
USD 6.0 - 15.0/kg
1.Basic Information (1)MPP Film Type: Metallized Polypropylene Film For Capacitors (2)Width:4.5-130mm (3)Thickness:1.6-12um (4)Margin Value:0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5)Specification:Metallized Film For Capacitors (6)Types Of Metallized Layer:Al Metallized Film、Zn/Al Metallized Film (7)Density: 0.905+/-0.005g/cm3 (8)Processing Type:Vacuum Coating Capacitor Film (9)Trade Mark :CSF (10)MOQ:1 Kilogram (11)Delivery Detail:7~15 Days After Payment (12)Packaging Details :To be shipped in vaccum-sealed metallized plastic bags (13)Transport Package:Vaccum Package For Standard Export Carton (14)Port :Shanghai Or Ningbo (15)Origin:Tongling City,Anhui Province,China(Mainland) 2.Products Types (1)Single margin Opp film with one side Zn-Al metallized (2)Single margin Opp film with slope resistance one side Zn-Al metallized (3)Single margin Opp film with high resistance one side Zn-Al metallized (4)Segmented metallized film (5)Middle margin PET film with double sided Al metallized (6)Single margin OPP film with one side Al metallized (7)Double margin OPP film with one side Al metallized (8)Multi-margin OPP film with one side Zn-Al metallized (9)We can design and produce all kinds of metallized film for capacitors according to customer's requirement 3.Normal Specification (1)Item:Metallized Polypropylene Film (2)Thickness(um):2/3/4/5/6/7/8/9/10/12 (3)Width(mm):14/17.5/21/26/30/35/37.5/40/45/50/55/60/65/70/75/80/85/90/95/100/115/120/125/130 (4)Margin Value(mm):1.0/1.5/2.0/2.5/3.0 (5)ID(mm):75 (6)OD(mm):180/240/270/320 Note:Other specifications and sizes of metallized bopp capacitor film which are not in the above table can be negotiable. 4.Packing (1)Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside (2)The bags are marked with type labels (3)The bags are packed in carton cases (4)The cartons are wrapped in wooden cases or reinforced carton 5.Storage (1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using. (2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as soon as possible when opened. (3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening. (4)With original sealed package,and stored as mentioned above,the storage time can be as following: Al metallized film:12 months from the delivery Alloy metallized film :As zinc is quite unstable,the storage period(from delivery date) depends on the resistance of the film: ≦10Ω:6 months 10-30Ω:3 months >30Ω:1 month 6.Our Advantages (1)Leading Technology *Professional manufacturing capacitor film for decades;Adopt advanced technology to ensure the reliability of products;A number of professional invention patents. (2)High Quality Products *Buy new equipment;Continuous innovation in the traditional production process; Quality management service center,quick response service within 24 hours. (3)Fast Delivery *Experienced management team,can adjust the flexible delivery time according to customer demand. (4)Government Support *Our company was awarded “National High-tech Enterprise ”for three consecutive years;2018 National Intellectual Property Advance Enterprise;2019 Tongling advanced group award.
USD 6.0 - 15.0/kg
1.Basic Information (1)MPP Film Type: Metallized Polypropylene Film For Capacitors (2)Width:4.5-130mm (3)Thickness:1.6-12um (4)Margin Value:0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5)Specification:Metallized Film For Capacitors (6)Types Of Metallized Layer:Al Metallized Film、Zn/Al Metallized Film (7)Density: 0.905+/-0.005g/cm3 (8)Processing Type:Vacuum Coating Capacitor Film (9)Trade Mark :CSF (10)MOQ:1 Kilogram (11)Delivery Detail:7~15 Days After Payment (12)Packaging Details :To be shipped in vaccum-sealed metallized plastic bags (13)Transport Package:Vaccum Package For Standard Export Carton (14)Port :Shanghai Or Ningbo (15)Origin:Tongling City,Anhui Province,China(Mainland) 2.Products Types (1)Single margin Opp film with one side Zn-Al metallized (2)Single margin Opp film with slope resistance one side Zn-Al metallized (3)Single margin Opp film with high resistance one side Zn-Al metallized (4)Segmented metallized film (5)Middle margin PET film with double sided Al metallized (6)Single margin OPP film with one side Al metallized (7)Double margin OPP film with one side Al metallized (8)Multi-margin OPP film with one side Zn-Al metallized (9)We can design and produce all kinds of metallized film for capacitors according to customer's requirement 3.Normal Specification (1)Item:Metallized Polypropylene Film (2)Thickness(um):2/3/4/5/6/7/8/9/10/12 (3)Width(mm):14/17.5/21/26/30/35/37.5/40/45/50/55/60/65/70/75/80/85/90/95/100/115/120/125/130 (4)Margin Value(mm):1.0/1.5/2.0/2.5/3.0 (5)ID(mm):75 (6)OD(mm):180/240/270/320 Note:Other specifications and sizes of metallized bopp capacitor film which are not in the above table can be negotiable. 4.Packing (1)Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside (2)The bags are marked with type labels (3)The bags are packed in carton cases (4)The cartons are wrapped in wooden cases or reinforced carton 5.Storage (1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using. (2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as soon as possible when opened. (3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening. (4)With original sealed package,and stored as mentioned above,the storage time can be as following: Al metallized film:12 months from the delivery Alloy metallized film :As zinc is quite unstable,the storage period(from delivery date) depends on the resistance of the film: ≦10Ω:6 months 10-30Ω:3 months >30Ω:1 month 6.Our Advantages (1)Leading Technology *Professional manufacturing capacitor film for decades;Adopt advanced technology to ensure the reliability of products;A number of professional invention patents. (2)High Quality Products *Buy new equipment;Continuous innovation in the traditional production process; Quality management service center,quick response service within 24 hours. (3)Fast Delivery *Experienced management team,can adjust the flexible delivery time according to customer demand. (4)Government Support *Our company was awarded “National High-tech Enterprise ”for three consecutive years;2018 National Intellectual Property Advance Enterprise;2019 Tongling advanced group award.
USD 6.0 - 15.0/kg
1.Basic Information (1)MPP Film Type: Metallized Polypropylene Film For Capacitors (2)Width:4.5-130mm (3)Thickness:1.6-12um (4)Margin Value:0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5)Specification:Metallized Film For Capacitors (6)Types Of Metallized Layer:Al Metallized Film、Zn/Al Metallized Film (7)Density: 0.905+/-0.005g/cm3 (8)Processing Type:Vacuum Coating Capacitor Film (9)Trade Mark :CSF (10)MOQ:1 Kilogram (11)Delivery Detail:7~15 Days After Payment (12)Packaging Details :To be shipped in vaccum-sealed metallized plastic bags (13)Transport Package:Vaccum Package For Standard Export Carton (14)Port :Shanghai Or Ningbo (15)Origin:Tongling City,Anhui Province,China(Mainland) 2.Products Types (1)Single margin Opp film with one side Zn-Al metallized (2)Single margin Opp film with slope resistance one side Zn-Al metallized (3)Single margin Opp film with high resistance one side Zn-Al metallized (4)Segmented metallized film (5)Middle margin PET film with double sided Al metallized (6)Single margin OPP film with one side Al metallized (7)Double margin OPP film with one side Al metallized (8)Multi-margin OPP film with one side Zn-Al metallized (9)We can design and produce all kinds of metallized film for capacitors according to customer's requirement 3.Normal Specification (1)Item:Metallized Polypropylene Film (2)Thickness(um):2/3/4/5/6/7/8/9/10/12 (3)Width(mm):14/17.5/21/26/30/35/37.5/40/45/50/55/60/65/70/75/80/85/90/95/100/115/120/125/130 (4)Margin Value(mm):1.0/1.5/2.0/2.5/3.0 (5)ID(mm):75 (6)OD(mm):180/240/270/320 Note:Other specifications and sizes of metallized bopp capacitor film which are not in the above table can be negotiable. 4.Packing (1)Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside (2)The bags are marked with type labels (3)The bags are packed in carton cases (4)The cartons are wrapped in wooden cases or reinforced carton 5.Storage (1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using. (2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as soon as possible when opened. (3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening. (4)With original sealed package,and stored as mentioned above,the storage time can be as following: Al metallized film:12 months from the delivery Alloy metallized film :As zinc is quite unstable,the storage period(from delivery date) depends on the resistance of the film: ≦10Ω:6 months 10-30Ω:3 months >30Ω:1 month 6.Our Advantages (1)Leading Technology *Professional manufacturing capacitor film for decades;Adopt advanced technology to ensure the reliability of products;A number of professional invention patents. (2)High Quality Products *Buy new equipment;Continuous innovation in the traditional production process; Quality management service center,quick response service within 24 hours. (3)Fast Delivery *Experienced management team,can adjust the flexible delivery time according to customer demand. (4)Government Support *Our company was awarded “National High-tech Enterprise ”for three consecutive years;2018 National Intellectual Property Advance Enterprise;2019 Tongling advanced group award.
USD 6.0 - 15.0/kg
1.Basic Information (1)Metallized Film Type: Metallized Polyester Film For Capacitors (2)Width:4.5-130mm (3)Thickness:1.9-12um (4)Margin Value:0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5)Specification:Metallized Film For Capacitors (6)Types Of Metallized Layer:Al Metallized Film、Zn/Al Metallized Film (7)Density: 0.905+/-0.005g/cm3 (8)Processing Type:Vacuum Coating Capacitor Film (9)Trade Mark :CSF (10)MOQ:1 Kilogram (11)Delivery Detail:7~15 Days After Payment (12)Packaging Details :To be shipped in vaccum-sealed metallized plastic bags (13)Transport Package:Vaccum Package For Standard Export Carton (14)Port :Shanghai Or Ningbo (15)Origin:Tongling City,Anhui Province,China(Mainland) 2.Products Types (1)Single margin Opp film with one side Zn-Al metallized (2)Single margin Opp film with slope resistance one side Zn-Al metallized (3)Single margin Opp film with high resistance one side Zn-Al metallized (4)Segmented metallized film (5)Middle margin PET film with double sided Al metallized (6)Single margin OPP film with one side Al metallized (7)Double margin OPP film with one side Al metallized (8)Multi-margin OPP film with one side Zn-Al metallized (9)We can design and produce all kinds of metallized film for capacitors according to customer's requirement 3.Normal Specification (1)Item:Metallized Polyester Film (2)Thickness(um):2/3/4/5/6/7/8/9/10/12 (3)Width(mm):14/17.5/21/26/30/35/37.5/40/45/50/55/60/65/70/75/80/85/90/95/100/115/120/125/130 (4)Margin Value(mm):1.0/1.5/2.0/2.5/3.0 (5)ID(mm):75 (6)OD(mm):180/240/270/320 Note:Other specifications and sizes of metallized bopp capacitor film which are not in the above table can be negotiable. 4.Packing (1)Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside (2)The bags are marked with type labels (3)The bags are packed in carton cases (4)The cartons are wrapped in wooden cases or reinforced carton 5.Storage (1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using. (2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as soon as possible when opened. (3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening. (4)With original sealed package,and stored as mentioned above,the storage time can be as following: Al metallized film:12 months from the delivery Alloy metallized film :As zinc is quite unstable,the storage period(from delivery date) depends on the resistance of the film: ≦10Ω:6 months 10-30Ω:3 months >30Ω:1 month 6.Our Advantages (1)Leading Technology *Professional manufacturing capacitor film for decades;Adopt advanced technology to ensure the reliability of products;A number of professional invention patents. (2)High Quality Products *Buy new equipment;Continuous innovation in the traditional production process; Quality management service center,quick response service within 24 hours. (3)Fast Delivery *Experienced management team,can adjust the flexible delivery time according to customer demand. (4)Government Support *Our company was awarded “National High-tech Enterprise ”for three consecutive years;2018 National Intellectual Property Advance Enterprise;2019 Tongling advanced group award.
USD 6.0 - 15.0/kg
1.Basic Information (1)MPP Film Type: Metallized Polypropylene Film For Capacitors (2)Width:4.5-130mm (3)Thickness:1.6-12um (4)Margin Value:0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5)Specification:Metallized Film For Capacitors (6)Types Of Metallized Layer:Al Metallized Film、Zn/Al Metallized Film (7)Density: 0.905+/-0.005g/cm3 (8)Processing Type:Vacuum Coating Capacitor Film (9)Trade Mark :CSF (10)MOQ:1 Kilogram (11)Delivery Detail:7~15 Days After Payment (12)Packaging Details :To be shipped in vaccum-sealed metallized plastic bags (13)Transport Package:Vaccum Package For Standard Export Carton (14)Port :Shanghai Or Ningbo (15)Origin:Tongling City,Anhui Province,China(Mainland) 2.Products Types (1)Single margin Opp film with one side Zn-Al metallized (2)Single margin Opp film with slope resistance one side Zn-Al metallized (3)Single margin Opp film with high resistance one side Zn-Al metallized (4)Segmented metallized film (5)Middle margin PET film with double sided Al metallized (6)Single margin OPP film with one side Al metallized (7)Double margin OPP film with one side Al metallized (8)Multi-margin OPP film with one side Zn-Al metallized (9)We can design and produce all kinds of metallized film for capacitors according to customer's requirement 3.Normal Specification (1)Item:Metallized Polypropylene Film (2)Thickness(um):2/3/4/5/6/7/8/9/10/12 (3)Width(mm):14/17.5/21/26/30/35/37.5/40/45/50/55/60/65/70/75/80/85/90/95/100/115/120/125/130 (4)Margin Value(mm):1.0/1.5/2.0/2.5/3.0 (5)ID(mm):75 (6)OD(mm):180/240/270/320 Note:Other specifications and sizes of metallized bopp capacitor film which are not in the above table can be negotiable. 4.Packing (1)Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside (2)The bags are marked with type labels (3)The bags are packed in carton cases (4)The cartons are wrapped in wooden cases or reinforced carton 5.Storage (1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using. (2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as soon as possible when opened. (3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening. (4)With original sealed package,and stored as mentioned above,the storage time can be as following: Al metallized film:12 months from the delivery Alloy metallized film :As zinc is quite unstable,the storage period(from delivery date) depends on the resistance of the film: ≦10Ω:6 months 10-30Ω:3 months >30Ω:1 month 6.Our Advantages (1)Leading Technology *Professional manufacturing capacitor film for decades;Adopt advanced technology to ensure the reliability of products;A number of professional invention patents. (2)High Quality Products *Buy new equipment;Continuous innovation in the traditional production process; Quality management service center,quick response service within 24 hours. (3)Fast Delivery *Experienced management team,can adjust the flexible delivery time according to customer demand. (4)Government Support *Our company was awarded “National High-tech Enterprise ”for three consecutive years;2018 National Intellectual Property Advance Enterprise;2019 Tongling advanced group award.
USD 6.0 - 15.0/kg
1.Basic Information (1)MPP Film Type: Metallized Polypropylene Film For Capacitors (2)Width:4.5-130mm (3)Thickness:1.6-12um (4)Margin Value:0.5mm 1.0mm 1.5mm 2.0mm 2.5mm (5)Specification:Metallized Film For Capacitors (6)Types Of Metallized Layer:Al Metallized Film、Zn/Al Metallized Film (7)Density: 0.905+/-0.005g/cm3 (8)Processing Type:Vacuum Coating Capacitor Film (9)Trade Mark :CSF (10)MOQ:1 Kilogram (11)Delivery Detail:7~15 Days After Payment (12)Packaging Details :To be shipped in vaccum-sealed metallized plastic bags (13)Transport Package:Vaccum Package For Standard Export Carton (14)Port :Shanghai Or Ningbo (15)Origin:Tongling City,Anhui Province,China(Mainland) 2.Products Types (1)Single margin Opp film with one side Zn-Al metallized (2)Single margin Opp film with slope resistance one side Zn-Al metallized (3)Single margin Opp film with high resistance one side Zn-Al metallized (4)Segmented metallized film (5)Middle margin PET film with double sided Al metallized (6)Single margin OPP film with one side Al metallized (7)Double margin OPP film with one side Al metallized (8)Multi-margin OPP film with one side Zn-Al metallized (9)We can design and produce all kinds of metallized film for capacitors according to customer's requirement 3.Normal Specification (1)Item:Metallized Polypropylene Film (2)Thickness(um):2/3/4/5/6/7/8/9/10/12 (3)Width(mm):14/17.5/21/26/30/35/37.5/40/45/50/55/60/65/70/75/80/85/90/95/100/115/120/125/130 (4)Margin Value(mm):1.0/1.5/2.0/2.5/3.0 (5)ID(mm):75 (6)OD(mm):180/240/270/320 Note:Other specifications and sizes of metallized bopp capacitor film which are not in the above table can be negotiable. 4.Packing (1)Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside (2)The bags are marked with type labels (3)The bags are packed in carton cases (4)The cartons are wrapped in wooden cases or reinforced carton 5.Storage (1)Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using. (2)Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should be used as soon as possible when opened. (3)The recommended temperature is 15-25ºC with humidty less than 60%RH after opening. (4)With original sealed package,and stored as mentioned above,the storage time can be as following: Al metallized film:12 months from the delivery Alloy metallized film :As zinc is quite unstable,the storage period(from delivery date) depends on the resistance of the film: ≦10Ω:6 months 10-30Ω:3 months >30Ω:1 month 6.Our Advantages (1)Leading Technology *Professional manufacturing capacitor film for decades;Adopt advanced technology to ensure the reliability of products;A number of professional invention patents. (2)High Quality Products *Buy new equipment;Continuous innovation in the traditional production process; Quality management service center,quick response service within 24 hours. (3)Fast Delivery *Experienced management team,can adjust the flexible delivery time according to customer demand. (4)Government Support *Our company was awarded “National High-tech Enterprise ”for three consecutive years;2018 National Intellectual Property Advance Enterprise;2019 Tongling advanced group award.

Qoovee is a platform for B2B trade and business services. Here you can discover products in any industry, including the Electrical equipment and parts. There are wide range of wholesale products you need on Qoovee. You can find Electrical equipment and parts in bulk from China, UAE, Kyrgyzstan, Kazakhstan, Russia, Ukraine, Turkey, Europe, Africa, Latin America and other different countries. The up to date supplier directory is constantly being expanded: now on Qoovee there are more than 20 000 suppliers from 80 countries. All product suppliers, who represent more than 600 product categories, are waiting for you to cooperate with!

Write to us, we are online!