All Electrical equipment and parts suppliers from Ukraine

Scope of solar collectors Houses, summer residences, cottages Industrial complexes, agricultural enterprises, greenhouses Hospitals, clinics, sanatoriums and other healthcare institutions Sports and fitness centers: stadiums, swimming pools, tourist centers, recreation areas Children's institutions: schools, kindergartens, centers of children's creativity, camps Hotel and tourist complexes Shopping and entertainment centers, shops, catering facilities (restaurants, cafes, canteens, etc.) Offices Objects of railway transport, ports, Ministry of Emergencies

LONGi Solar LR4-72HPH-430M, 430W - single-crystal solar panel is a universal choice among solar modules. Type - single crystal Power - 430 W Number of busbars - 6 BB Size (L \ W \ H) - 2115х1052х35 mm Weight - 24 kg Module efficiency - 19.3% We install turnkey solar panels throughout Ukraine. Sale, installation, warranty! We connect the Green tariff. The best prices in Ukraine.

We install turnkey solar power plants Solar energy is today one of the most promising ways to develop the renewable (non-traditional) energy sources industry, which is based on the direct transformation of solar radiation energy into other types of energy, such as electricity or heat. The solar energy industry is environmentally friendly, and its active development takes place both due to economic factors (significant price hikes on traditional energy carriers, with a tendency to reduce the cost of equipment for working with renewable energy sources), as well as state support programs operating in many countries (for example, “ green tariff ”in Ukraine). 30kW Home Network Solar Power Station The total area of solar panels is 180 m2 Service life - 25-30 years Average annual generation - 36 500 kW The average annual income is 6,400 cu Payback period - 2.9 years More details:

Complete switchgears are & nbsp; for the reception and distribution of electrical energy with a frequency of 50 Hz with a voltage of 10 (6) kV & nbsp; with rated current of busbars 630,1000,1250,1600,2000,2500 and 3150А and operated in regions with a temperate climate (from -25 ° С to + 40 ° С). & nbsp; Type of climatic modification U3 or T3 according to GOST 15150. & nbsp; Normal operation of the switchgear is ensured under the following conditions: & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 1. Altitude above sea level & ndash; no more than 1000 m; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 2.Environment & ndash; is not explosive, does not contain conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP in unacceptable standards; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; 3.Type of atmosphere & ndash; II in accordance with GOST 15150. & nbsp; The main technical parameters of the switchgear are shown in Table 1. Classification of cabinets is given in Table 2. In case of double-row cabinet design, the switchgear is equipped with busbar bridges. Busbar bridges are only installed on the outermost cabinets. The distance between the fronts of the cabinets must be 2000, 2500 or 3000 mm. & Nbsp;

Saeco Royal Classic Specifications: Pump pressure, Bar: 15 Type espresso machine For home business Grain and ground coffee Functions: auto shut-off, selection of the volume of portions, supply of hot water for tea, heating of cups, adjustment of coffee strength. Manual cappuccino preparation Ground coffee container Capacity for water, l: 2.4 Capacity of the container for coffee beans, g 300 Weight, kg: 13 Boiler material: aluminum alloy Body material: ABS plastic Power consumption, W: 1250 Color: silver with black Dimensions (WxHxD), mm: 340x395x410 Made in Germany The history of the Saeco International Group dates back to the 70s of the last century. In 1976, a company was created that produced equipment for the preparation of espresso coffee. From that moment, the history of a uniquely tasty drink brewed in a coffee machine began. Saeco gives you the perfect opportunity to enjoy all the notes and the enchanting taste of this invigorating drink. The automatic Saeco Royal Classic machine differs from the models offered on the market by its simplicity and compactness in use, it is designed for making espresso coffee. It has a number of advantages, the main of which are additional functions: the quality of coffee grinding is regulated, it is pre-wetted, there is a nozzle for frothing milk and control of the volume and consumption of coffee per serving. In addition, you will be pleased with the spacious waste container for 30 portions and a capacity of 2.4 liters of water. It should be emphasized that the machine is not designed to accept ground coffee, it has a built-in grinder that accepts coffee of any roast. Such features and equipment allow using the coffee machine in small offices, banks and other similar organizations, where the invigorating and magical qualities of coffee will be 100% appreciated. The durability and quality of the Saeco Royal Classic coffee machine is confirmed by the material from which it is made, as evidenced by its appearance. The parts of the machine and the main connecting parts are made of brass and steel, the base is metal, and the body is high temperature ABS plastic. The Saeco Royal Classic is a machine designed for continuous operation, very easy to use and maintain.

Prefabricated chambers one-way service KSO 306 and busbar bridges SHM and SMR for them are intended for switchgear configuration voltage 6 or 10 kV AC frequency 50 Hz with isolated neutral. Type of climatic modification U3 by GOST15150. Normal operation of KSO is ensured when following conditions: 1. Height above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure speed up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. The main circuits of the KSO consist of the following devices; 1. Autogas load switch VN-RA - chambers 03-06, 08.09 and 24; 2. Disconnector with grounding knives RV - chambers 01, 02, 07, 10, 11, 14P, 14L; 3.Vacuum circuit breaker BB / TEL or VR-1 with electromagnetic drive - 12V, 14V and 17V chambers. A set of protections is provided in the chambers - overcurrent protection, overcurrent cutoff, ground fault protection, voltage circuit monitoring, automatic transfer switch (ATS); 4. Voltage transformers - chambers 10 and 11; 5.Transformers for auxiliary needs - cameras 12V, 13V and 23. On request, active and reactive energy metering cabinets are supplied. With a two-row design, the switchgear is completed bus bridges with or without disconnectors (ШМР). Bus bridges are installed only on the outermost chambers. Distance between the facades of the chambers: 2000 mm (ШМР-1, ШМ-1); 2500 mm (ShMR-2, ShM-2); 3000 mm (ShMR-3, ShM-3); 3500 mm (ShMR-4, ShM-4). Connection of cameras to the external network - cable. The chambers are provided with all interlocks in accordance with regulatory documents. An example of ordering a KSO camera made according to scheme 05, with a rated voltage of 10 kV Chamber KSO 306-05 U3 TU U 31.2-14152239-002: 2006, An example of ordering a KSO chamber with a vacuum circuit breaker, made according to the 13 V circuit, with a nominal voltage of 10 kV Chamber KSO 306-13V U3 TU U 31.2-14152239-002: 2006, Example of ordering a busbar bridge with disconnectors with a distance between the facades of the chambers of 2500 mm Bus bridge SHMR-2 U3 TU U 31.2-14152239-002: 2006.

Panels of switchboards SCHO-06 are designed to receive and distribute electrical energy of three-phase alternating current with a frequency of 50 Hz and voltage up to 660 V and to protect outgoing lines from overloads and short-circuit currents. Type of climatic modification U3 in accordance with GOST 15150. Normal operation of SCHO is provided under the following conditions: 1. Height above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure speed up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. SCHO panels are manufactured in two versions according to the degree of protection (the first digit in the panel designation): 1 - open (degree of protection IP00 and only from the side of the facade - IP20); 2 - closed (degree of protection IP20 and only from the bottom side - IP00). According to the purpose, the panels are divided into introductory, sectional, distribution and auxiliary ones. Accessory panels include supervisory panels, metering cabinets, and end panels. When installing the panels in two rows, the switchgear is equipped with a busbar bridge with a distance between the facades of -1000, 1500 and 2000mm. The panels are equipped with the following equipment: 1. Introductory and sectional - automatic switches of withdrawable and fixed design and circuit breakers, 2. Distribution circuit breakers - withdrawable or fixed circuit breakers, RPS fuse switches or insulated switches with RBK or ARS fuses. On request, the products are completed with installations for reactive power compensation. Panels are assembled into transport groups up to 4 m long. Example of ordering an input panel SCHO of protection degree IP00 with a rated current of inputs 1600 A, made according to scheme 01 ShchO-06-1101 U3 panel TU U 31.2-14152239-004: 2006, Example of ordering a busbar bridge with a distance between the facades of the chambers of 1000 mm Bus bridge SHM-2 U3 TU U 31.2-14152239-004: 2006.

Complete transformer substations for urban networks of through-passage and dead-end type - KTPG with a capacity of 100-2500 kVA, HV voltage of 6 or 10 kV and LV voltage of 0.4 kV are designed to receive, convert and distribute electrical energy of three-phase alternating current with a frequency of 50 Hz in systems with a dead-grounded neutral transformer on the low voltage side. KTPG are designed to supply power to agricultural consumers, individual settlements and small industrial facilities in areas with a temperate climate (from -45 ° C to + 40 ° C). Type of climatic modification U1 in accordance with GOST15150. Normal operation of the KTP is ensured under the following conditions: 1. Height above sea level - no more than 1000 m; 2.Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP in unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure speed up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. High-voltage input - air or cable, outgoing line branches - air or cable. Also, KTPG are manufactured as one-transformer and two-transformer (with sectioning for high and low voltage). Circuit breakers are installed on the LV side. Their number and rated current are shown in the table. The package of delivery of the KTP includes UVN (air inlet) and LVDN cabinets, a power transformer, an outdoor disconnector RLNDz-10/630 (on request). On request, the KTP can provide street lighting lines, which are switched on automatically by a signal from the built-in relay and by installations for reactive power compensation. ... Example of ordering a single-transformer KTP with a power of 630 kVA with a network voltage of 6 kV HV cable gland and LV cable gland KTPG-2K- 630/6 / 0.4 U1 TU U 3.2-14152239-001: 2004. Example of ordering a two-transformer KTP with a capacity of 250 kVA and a network voltage of 10 kV HV air inputs and LV cable glands

Complete transformer substations dead-end - KTP-1 with a capacity of 25 - 630 kVA, HV voltage 6 or 10 kV and LV voltage 0.4 kV are intended for receiving, converting and three-phase electrical power distribution alternating current with a frequency of 50 Hz in systems with solid-grounded neutral of the transformer on low voltage side. KTP-1 are intended for power supply of agricultural, industrial consumers, individual communities points and small industrial facilities in areas with a temperate climate (from -45 ° С to + 40 ° С). KTP-1 is installed on the simplest concrete site. Type of climatic modification U1 in accordance with GOST15150. Normal operation of the KTP is ensured under the following conditions: 1. Altitude above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. High-voltage input - air or cable, outgoing line branches - air or cable. Dead-end KTP-1 are manufactured as one-transformer and two-transformer (with high and low voltage sectioning). Circuit breakers are installed on the LV side. Their number and rated current are shown in the table. The package of delivery of the KTP includes UVN (air inlet) and LVDN cabinets, a power transformer, an outdoor disconnector RLNDz-10/630 (on request). On request, the KTP can provide street lighting lines, which are switched on automatically by a signal from the built-in relay.

Transformer substations complete dead-end - KTP-2 power 25-2500 kVA, voltage HV 6 or 10 kV and LV voltage 0.4 kV intended for reception, transformation and distribution electrical energy three-phase alternating current with a frequency of 50 Hz in systems with grounded neutral transformer on the low side voltage. KTP-2 are intended for power supply of agricultural consumers, individual settlements and small industrial facilities in areas with a temperate climate (from -45 ° C to + 40 ° C). KTP-2 is installed on the simplest concrete site. Type of climatic modification U1 in accordance with GOST15150. Normal operation of the KTP is ensured under the following conditions: 1. Height above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure speed up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. High-voltage input - air or cable, outgoing line branches - air or cable. Passage KTP-2 are manufactured as one-transformer and two-transformer (with sectioning for high and low voltage). Circuit breakers are installed on the LV side. Their number and rated current are shown in the table. The package of delivery of the KTP includes UVN (air inlet) and LVDN cabinets, a power transformer, an outdoor disconnector RLNDz-10/630 (on request). On request, the KTP can provide street lighting lines, switched on automatically by the signal of the built-in relay and by installations for reactive power compensation.

Complete pole transformer substations with a capacity of 25-250 kVA of three-phase alternating current with a frequency of 50 Hz with a voltage of 10 (6) \ 0.4 kV are single-transformer substations of a dead-end type of outdoor installation and are used to supply power to agricultural consumers, individual settlements and small industrial facilities in areas with temperate climate (from -45 ° С to + 40 ° С). Type of climatic modification U1 in accordance with GOST15150. Normal operation of the KTPS is ensured under the following conditions: 1. Altitude above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. KTPS has the following components: 1. Device on the high voltage side (UHV); 2. Transformer of power outdoor installation three-phase or single-phase transformer of OMP-10 or 6kV type; 3. Switchgear on the low voltage side (LVSN) with circuit breakers on outgoing lines and street lighting line.

Complete transformer substations with capacity 25-250 kVA three-phase alternating current with a frequency of 50 Hz voltage 10 (6) \\ 0.4 kV are single-transformer substations of dead-end type outdoor installation and serve for power supply agricultural consumers, individual populations points and small industrial facilities in areas with a temperate climate (from -45 ° С to + 40 ° С). Type of climatic modification U1 in accordance with GOST15150. Normal operation of the KTPM is ensured when following conditions: 1. Altitude above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150. KTPM has the following components: 1. Device on the high voltage side (UHV); 2. Transformer of power outdoor installation three-phase or single-phase transformer of OMP-10 or 6kV type; 3. Switchgear on the low voltage side (LVSN) with circuit breakers on outgoing lines and street lighting line.

TM oil transformers are produced with a capacity from 25 to 1000 kVA for a rated voltage of the primary winding of 6 or 10 kV and a rated voltage of the secondary winding of 0.4 or 0.23 kV with a frequency of 50 Hz. Scheme and group of connections of windings U / Un-0 or D / Un-11. Type of climatic modification U1 in accordance with GOST 15150. Normal operation of transformers is ensured under the following conditions: 1. Height above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure speed up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150; 5. Ambient temperature - from -45 ° С to + 40 ° С. Voltage regulation is carried out by switching without excitation (PBV) when the transformer is disconnected from the mains, both on the high and low voltage sides. The voltage is regulated from the high voltage side by ± 2x2.5% of the nominal value. Outdoor transformer bushings, removable, porcelain bushing insulators. At currents of 630 and 2500A, contact clamps with a paddle are attached to the current-carrying rods, which ensures the connection of a bus or cable lugs. The oil conservator ensures the presence of oil in all operating modes of the transformer and fluctuations in ambient temperature, and also has a built-in air dryer with an oil seal. A thermometer is installed on the lid to measure the temperature of the upper layers of oil. Transformers with power from 400 to 2500 kVA are equipped with rollers. Transformers comply with GOST 116777 and technical specifications TU U31.1-31617591-001-1005.

Marine air compressors and installations are used on ships: - to launch the main diesel installation; - to provide facilities with high-pressure compressed air; - filling with air and maintaining pressure in ship air guards; - refueling cylinders of breathing apparatus.

Compressors of this group are used in technological processes where compression of various gases (except air) is required, including aggressive, poisonous, explosive, inert and toxic. These compressors are used, for example, in the oil industry to create excess pressure in oil wells, in gas-flare facilities of oil refineries, in many technological processes of the chemical industry, in the space industry to create high-pressure dry nitrogen reserves, etc.

ENERGOSERVICE-M LLC is a leading Ukrainian enterprise in the supply of industrial refrigeration equipment with highly qualified engineering and production personnel and modern technological equipment. ENERGOSERVICE-M LLC - is a supplier of crane and autonomous air conditioners to ensure the safe operation of technological equipment, maintain the required temperature and humidity, clean it from harmful impurities: Autonomous industrial air conditioners: KA1-25 (KA2-25), KA1-40 ( KA2-40), KSA-15 (2KSA-15), KSA-20 (2KSA-20), KSA-25 (2KSA-25), KSA-45 (2KSA-45), 1KSA-15 (3KSA-15), 1KSA-20 (3KSA-20), 1KSA-25 (3KSA-25), 1KSA-45 (3KSA-45), KSA6.5 / 25 (1KSA6.5 / 25), KSA-3/15 (1KSA-3 / 15) are installed in industrial and office premises: 1) Control panels (posts) on rolling mills ( CA-15, KSA-20, KSA-25); 2) Control panels in the heat-power workshop (KSA-15, KSA-20); 3) Mashrooms (KSA-25, KSA-45); 4) Electrical facilities (microprocessor, thyristor, local telephone exchanges); 5) Laboratories (chemical, quantometric); 6) Service premises (conference rooms, canteens, change houses).

final pressure: 150 kgf / cm2 productivity: 1.8 m3 / min. THE UNIT OF DRYING AIR UBOV-0.3 / 150 is intended for drying and purification of air compressed to a pressure of 150-200 kgf / cm2 from moisture and mechanical impurities. Recommended for use with compressors EK2-150, EKPA2-150, KR-2 (AKP-2), VT1.5-0.3 / 150.

Designed for unloading eight- and fifteen-ton auto-carriers. The compressor is installed instead of the rotary vane, in comparison with which it has a number of advantages: increased reliability and long service life, provided structurally due to the absence of friction surfaces in the working chamber; there is no need to use a filter and an oil separator, since there is no lubrication in the flow part of the compressor; the unloading time of an eight-ton auto-carrier is no more than 20 minutes, fifteen-ton - 40 minutes. NAME OF PARAMETERS \ MODEL COMPRESSOR GEAR 3AF51K55T Final working pressure, kgf / cm2 1,1 Productivity under suction conditions, m3 / min 4,5 Power consumption at working pressure, kW 14,8 Oil consumption for ablation, g / h 0,45 Compressor shaft rotation frequency, rpm 2700 Air temperature at the compressor outlet, ° С 145 Weight, kg 652 Overall dimensions (length x width x height), mm 1330 x 655 x 940

Compressor plants 1KR-2 and 1AKR-2 are used to pump air into cylinders and maintain pressure from 80 to 150 kgf / cm2 in manual (1KR-2) and automatic (1AKR-2) modes. Compressor plants 1KR-2 and 1AKR-2 are used: · for starting diesel-electric units; · To provide industrial facilities with compressed air; · As part of oil drilling rigs. The installation consists of a three-stage compressor, driven by an electric motor through a V-belt drive. Circulating pressure lubrication from gear pump. Liquid cooling, closed loop.

Air compressors 4VU1-5 / 9 series are used to provide compressed air to pneumatic tools, devices, mechanisms; work in pneumatic transportation systems for bulk solids (sand, cement, grain, etc.). Are applied: · at machine-building enterprises; · As part of oil and gas rigs; · At the facilities of the petrochemical, gas, metallurgical, electrochemical, mining and other industries. Piston compressors, V-formed, four-cylinder, two-stage. Drive from an electric motor through an elastic coupling. Forced lubrication. Air cooling of cylinders and refrigerator. Condensate discharge and discharge are automatic. Compressors 4VU1-5 / 9 are equipped with an automatic control and protection system, which provides: · automatic maintenance of pressure in the receiver within specified limits by starting and stopping the compressor, as well as bypassing the air from the discharge to the suction; · Unloading and purging of the compressor when it is stopped; · Electric oil heating in the crankcase (for the northern version); · The ability to purge and unload the compressor from the control panel in manual mode; · Emergency stop during overheating of compressed air; · Emergency stop when the pressure in the lubrication system is below the permissible value. Compressors with relay or microprocessor automation are available. 4VU1-5 / 9 air compressor series are manufactured in the following modifications: 4VU1-5 / 9 M1 compressor 4VU1-5 / 9 M2 compressor 4VU1-5 / 9 M3 compressor (without electric motor and frame) 4VU1-5 / 9 M4 compressor 4VU1- compressor 5/9 M6 (without electric motor, refrigerator, frame, control panel and pressure gauge shield) 4VU1-5 / 9 M7 compressor with electric oil heating (without electric motor and frame) 4VU1-5 / 9 M8 compressor with electric oil heating 4VU1-5 / 9 compressor M32 (without electric motor and frame) Compressor 4VU1-5 / 9 M42

MVT36-2-0 Designed for cooling a liquid coolant in air conditioning systems, cooling systems for milk, soft drinks, beer, sparkling wines, oils using an intermediate coolant. It is used on dairy farms, food industry enterprises, in air conditioning systems.

Stand-alone air conditioner AKV-4.5 with air-cooled condenser, designed for cooling, heating and purifying air in industrial premises, control rooms, equipment rooms, electrical halls, office rooms, at ambient temperatures up to + 45 ° C. Provides maintaining the required air temperature in the range from 12 ° C to 28 ° C, with an accuracy of ± 1 ° C. The air conditioner is equipped with compressors and components of the world's leading manufacturers in the field of refrigeration - Copeland, Danfoss, Bristol. NAME OF PARAMETERS \ MODEL AUTONOMOUS AIR-CONDITIONER AKV-4,5 Productivity on cold, kW 21,0 Productivity on heat, kW 12,0 Nominal air consumption, m3 / h 4500 External static pressure, Pa 300 Degree of air purification,% 90 Refrigerant R -22 Power supply 380 V / 3ph / 50 Hz Power consumption (in cooling mode), kW 8.9 Evaporator type Copper tubes with aluminum fins Condenser type Copper tubes with aluminum fins TRV refrigerant flow regulator TRV refrigerant flow regulator Fan (centrifugal with double external suction): drive: belt; power: 1,5 kW. Overall dimensions (length x width x height), mm: air handling unit: 520 x 1200 x 1800; condenser unit: 650 x 1500 x 850. Weight, kg: air handling unit: 265; capacitor block: 110.

Compressor FV6. It has an external drive and operates in 3 modes. The first uses R-12 freon. The device is capable of achieving 7.5 kW of cooling capacity, while consuming no more than 2.5 kW of energy. The second mode also includes operation on R-12 freon, but the compressor produces up to 5.35 kW, spending 1.7 kW of energy. The third mode is activated when refueling with R-22. This makes it possible to generate 11.05 kW of cooling capacity, using 4.2 kW of electricity. The FV6 compressor is one of the main elements of the refrigeration unit and serves to carry out a continuous refrigeration cycle by constantly aspirating the refrigerant vapor from the evaporator and compressing them to condensation pressure. Designed to work as part of automated stationary and transport refrigeration units and air conditioners. NAME OF PARAMETERS \ MODEL REFRIGERATING COMPRESSOR ФВ6 Compressor type Freon compressor, piston, vertical, single-stage, cross-axle with external drive. MODE 1 Cooling capacity, kW (kcal / h) 7.5 (6500) Effective power, kW 2.5 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). MODE 2 Cooling capacity, kW (kcal / h) 5.35 (4600) Power consumption, kW 1.7 Volume described by pistons, m3 / h 20.7 Cooling capacity and effective power are indicated in the mode, ° С during operation on R-12 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 16 s-1 (960) (rpm). MODE 3 Cooling capacity, kW (kcal / h) 11.05 (9600) Power consumption, kW 4.2 Volume described by pistons, m3 / h 31.0 Cooling capacity and effective power are specified in the mode, ° С during operation on R-22 on the mode: boiling point minus 15 ° С; condensation temperature 30 ° C; suction vapor temperature 15 ° C; shaft rotation speed 24 s-1 (1440) (rpm). Cylinder diameter, mm 67.5 Piston stroke, mm 50 Number of cylinders, pcs 2 Refrigerant R12 or R22 Brand of used oil ХФ12-16 (for R-12) or ХФ22с-16 (for R-22) Amount of refilled oil, kg 1 , 7 ± 5% Weight, kg 50 Overall dimensions (length x width x height), mm 368 x 324 x 392

Designed for pumping air and gases, non-aggressive to gray cast iron, structural steel and mineral oil, and explosion-proof in the conditions of the flow part and gear reducer. It is used ONLY with a fore-vacuum pump and is the second stage of vacuum. It is used in the following processes: drying of transformers and other devices; impregnation of windings, cable, wood and other materials; distillation in metallurgy upon receipt of non-ferrous metals, as well as chemically pure substances in the chemical and pharmaceutical industries; freeze-drying of products, biologically active preparations, vaccines; melting, casting, alloying of metal alloys; sintering of fine-grained and powdery materials in powder metallurgy, during sintering, coking, in the manufacture of refractory products. The DVN pump consists of the pump itself, mounted on the foundation frame, and connected to it by means of an elastic finger coupling of the electric motor. Cooling of the pumps 2ДВН-500 - air, 2ДВН-1500 - water. NAME OF PARAMETERS \ MODEL PUMP VACUUM 2DVN-1500 Speed of action, not less than, l / s 1500 Differential pressure, not more than, kPa 1,0 Maximum residual total pressure, Pa 0,5 Electric motor power, kW 11 Cooling water consumption, l / h 360 Weight, kg 830 Overall dimensions (length x width x height), mm 1840 x 580 x 850 Designation of the recommended fore-vacuum pump NVZ-180

NAME OF PARAMETERS \ MODEL AIR COMPRESSOR 4VU1-5 / 9M32 Final overpressure, kgf / cm2 8 Productivity, m3 / min according to the suction conditions: 5 compressed air: 0.56 Engine power, kW - Crankshaft rotational speed, rpm 735 Weight , kg 750 Overall dimensions, mm 1110 x 960 x 1110 Oil heating in the crankcase -

Designed for the transport of air, toxic and aggressive to oil gases, non-corrosive to cast iron and structural steel, explosion-proof in the flow part and not containing droplet liquid and mechanical impurities. The gas blower is supplied driven by an electric motor through an elastic coupling. Delivery options with an explosion-proof or general industrial electric motor are possible. The gas blower can be operated in pressure or vacuum modes at an ambient temperature of -10 ° C to + 35 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY 1G21-30-2V Max. pressure difference, kPa, pressure mode: 30 vacuum: 30 Productivity, m3 / min 4.32 Power of electric motor, kW 4.0 Weight, kg 285 Overall dimensions (length x width x height), mm 1050 x 450 x 545

Rotary compressor 12VF-M-30-0.6-1.5-2.2 VF compressors: 2VF, 12VF, 32VF and 34VF are designed for transporting air and gases non-corrosive to cast iron, structural steel and mineral oil. VF rotary compressors, compressors 2VF-M-70-21,5-1,5-45, 12VF-M-20-0,69-1,5-2,2, 32VF-M-60-22,1-1 5-45, 32VF-M-80-21.0-1.5-45 (32VF-21 / 1.8SM2U3), 34VF-M-30-38.2-1.5-45, 34VF-M- 40-37.4-1.5-45, 34VF-M-50-36.6-1.5-45 (34VF-37 / 1.5SM4U3) are used: in pneumatic transportation systems for bulk materials, air mail containers; in aeration systems of the sludge pools of treatment facilities, drinking water storage tanks, fish ponds; when spraying crops and gardens; during fire fighting; when removing dust in printing houses, foundries, filter plants; for driving various devices and mechanisms (grips, clamps). Compressor stations 2VF, 12VF, 32VF and 34VF are supplied with vertical and horizontal air flow direction. Compressors 2VF, 12VF, 32VF and 34VF consist of a compressor unit, a check valve, an electric motor, silencers and a noise-attenuating casing. Compressors operate in pressure and vacuum modes. Compressors rotary VF series are issued instead of earlier made compressors of grades 1A, 2AF.