Product description
TM oil transformers are produced with a capacity from 25 to 1000 kVA for a rated voltage of the primary winding of 6 or 10 kV and a rated voltage of the secondary winding of 0.4 or 0.23 kV with a frequency of 50 Hz. Scheme and group of connections of windings U / Un-0 or D / Un-11. Type of climatic modification U1 in accordance with GOST 15150. Normal operation of transformers is ensured under the following conditions: 1. Height above sea level - no more than 1000 m; 2. Environment - non-explosive, not containing conductive dust, corrosive gases and vapors in concentrations that reduce the parameters of the KTP within unacceptable limits; 3. Wind speed up to 36 m / s (wind pressure speed up to 800 Pa); 4. Type of atmosphere - II in accordance with GOST 15150; 5. Ambient temperature - from -45 ° С to + 40 ° С. Voltage regulation is carried out by switching without excitation (PBV) when the transformer is disconnected from the mains, both on the high and low voltage sides. The voltage is regulated from the high voltage side by ± 2x2.5% of the nominal value. Outdoor transformer bushings, removable, porcelain bushing insulators. At currents of 630 and 2500A, contact clamps with a paddle are attached to the current-carrying rods, which ensures the connection of a bus or cable lugs. The oil conservator ensures the presence of oil in all operating modes of the transformer and fluctuations in ambient temperature, and also has a built-in air dryer with an oil seal. A thermometer is installed on the lid to measure the temperature of the upper layers of oil. Transformers with power from 400 to 2500 kVA are equipped with rollers. Transformers comply with GOST 116777 and technical specifications TU U31.1-31617591-001-1005.
Learn more
Check availability
Specify the price
0
0
USD
Minimum order: 1 pcs
Supply ability: 12 pcs/per day
ООО Энергоприладпостач
Not verified supplier
Ukraine
Shipping information
Calculate and complete your cargo transportation worldwide using Qoovee Logistics.
Guaranteed shipment on time and secure payment Calculate shipping from QooveeSimilar products
Proyektelektrotekhnika
Russia
Specify the price
USD
0
0
Buy dry cast resin transformers at an affordable price. These three-phase devices are designed to power converter equipment for various purposes. Basically, such transformers are used for: - excitation systems of hydro and turbo generators; — providing power to the electric drive of the drilling rig, as well as semiconductor converters of traction substations of urban electric transport (trams, trolleybuses, metro); — operation in rectifier units, in power electrical installations included in the traction power supply system of railways; — power supply of electric drives with direct and alternating current. Advantages: environmental safety, natural air cooling, resistance to low temperatures and precipitation, fire safety. Characteristics: - type of insulating winding: TLSP, TLSZP, TRLSP AND TRLSZP; — power: up to 3200 kVA; — voltage class: up to 10 kV; — execution and quality comply with GOST requirements; — country of origin: Russia. All products are tested in our own automated testing laboratory, which allows us to perform standard, acceptance and certification tests of products. The equipment is guaranteed for 3 years from the date of commissioning. 3-year warranty from the date of commissioning We deliver our equipment to any region and the CIS. To clarify prices for dry-type transformers and order power equipment with the required parameters, call our manager. All equipment is shipped with a full set of documents: - Passport - Test report - Operation manual - Sales and purchase agreement - We will produce shipping documents in a short time. We control the quality of production at all stages.
Allo Calibration
Indonesia
USD
7892.0/pcs
7892.0
Price: $7,892 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Field-hardened temperature from 0° to 50°C Portability/Weight less than 15 lbs Built-in microprocessor controlled compressor for automatic pressure generation and control Modular design - choose your choice Unrivaled accuracy down to 0.025% of reading pressure or 0.01% electrical full scale values Stable pressure regulation down to 0.002"H2O (Quick Cal 191/196) or 0.02"H2O (Quick Cal 190/15) Monitor up to three parameters simultaneously Bright, sunlight readable, high resolution, white paper with backlit display Documentation models interface with leading CMS packages including Blue Mountain, AMS and Cornerstone > Each module includes only a calibrator.
Specify the price
USD
0
0
Transformers TM, from 63 to 1000 kVA from availability after revision or overhaul. 2 year warranty. Full package of documents and test report. The price is approximately 50% below the market price. Transformers are supplied both new, from storage, and revision (with the issuance of protocols of the established sample).
LLP "Electrosnab-EM"
Kazakhstan
USD
6900.0 - 81000.0/pcs
Our company is a manufacturer of a KTPG-type transformer and is ready to deliver this product on time and with high quality. Complete transformer substations are single-transformer substations for outdoor installation and are used to receive three-phase alternating current electricity with a frequency of 50 Hz with a voltage of 6 or 10 kV, convert it into electricity with a voltage of 0.4 kV and supply it to consumers (including oil refining facilities) in the regions with a temperate climate (from - 40 ° С to + 40 ° С). A transformer substation is an electrical installation designed to receive, convert (increase or decrease) voltage in an alternating current network and distribute electricity in power supply systems to consumers in rural, township, urban, industrial facilities. Consists of power transformers, switchgear switchgear, automatic control and protection devices, as well as auxiliary structures.
LLP "Electrosnab-EM"
Kazakhstan
USD
4650.0 - 12000.0/pcs
The company LLP "Electrosnab-EM" will manufacture and deliver on time and with high quality. 10 kV in networks with isolated or compensated neutral and can be used for completing switchgears of closed transformer substations and distribution points. Prefabricated chambers of one-sided service KSO are manufactured in accordance with the requirements of technical specifications ST AO-00010033-004-2007; GOST 22789-94 and GOST R 51321.1-2000.
Block complete transformer substation BKTP with capacity from 160 to 4000 10-20 (6) -0.4 kVA - 67286
LLP "Electrosnab-EM"
Kazakhstan
USD
10520.0 - 465116.0/pcs
The company LLP "Electrosnab-EM" will produce and supply block transformer substations of various capacities in time and with high quality.
Block transformer substations (BKTP) are a comprehensive solution to the customer's tasks for reliable and high-quality power supply of facilities. Easy to install, reliable, easy to operate and perfect in performance.
BKTP serve for the reception, transformation and distribution of three-phase alternating current with a frequency of 50 Hz with a voltage of up to 20 kV using domestic and / or foreign electrical equipment with air and SF6 insulation.
Designed for power supply of housing and communal, public, industrial and agricultural facilities, individual building sites and cottage settlements. BKTP are operated without permanent maintenance personnel.
USD
8500.0/pcs
8500.0
Application:
ASSEN ZYD Transformer Oil Purification plant is portable maintenance equipment, it is a process the reduces, or in fact, eliminates all the physical contaminants from oils by means of physical processes such as oil filtration, de-humidification, and degasification. ZYD transformer oil filtration process effectively removes all those particles that are larger than 0.1 micron as well as most of the dissolved water and gases in the oil.
Aftre treatment
Moisture
PPM
≤3
Gas content
%
≤0.01
Impurity size
μ
≤1 (no free carbon)
Breakdown voltage
kV
≥75
IFT
dynes/cm
≥40
Acid value
mgKOH/g
≤0.03
Dielectric loss factors
tgδ(90°C)
≤0.001
Features: 1. Unique and highly efficient dewatering and degassing device, it adopted a large area three-dimensional flash evaporation and mature film evaporation technology to rapidly remove the free and dissolved water and gases from used and waste insulating oils. 2. Precise filtration system, high quality filter element, multi-stage filtration system levels, can effectively remove the mechanical impurities from the insulating oils. 3. Electrical heating system is the optimized pipeline design to ensure uniform heating and stable oil temperature. 4. Automatic constant temperature control device, automatic liquid level control device, automatic defoaming device, automatic pressure protection device and excellent configuration can ensure the equipments in high performance. 5. Work online and the indicators display running. 6. Unattended operation with low working noise and longtime free maintenance.7. A complete machine safety interlock protection system, discharge oil system, vacuum system and the heating system interlock, to avoid the adverse effects of misuse.
Our Services:
1. We customize the machine as your requirements.2. We have more than 20 years export experience.3. We offer our customers high quality products at competitive price.4. We offer our customers excellent after-sales service.5. We are not satisfied until our customers are satisfied
For any inquiry,Please don't hesitate to contact Assen
USD
6000.0/pcs
6000.0
Application: The oils inside transformers are mainly used for insulation, in addition, they suppress corona discharge and arcs, and also act as refrigerants inside machines. These oils must be absolutely clean and dry to achieve and maintain optimum insulating properties and dielectric strength. This is where the need for transformer oil purification arises. The ASSEN ZYD Transformer Oil Purifier is the key to the reliability, performance and durability of the transformer. The insulating oil of the transformer must be free from moisture, dissolved gases and particles that accumulate as the oil ages. Even some new oils may require processing to limit their content to acceptable levels. Features: 1. Expectations of an efficient insulating oil treatment plant. 2. Suitable for oil treatment, oil vacuum injection and hot oil cycling in the installation and maintenance of large power transformers. 3. Simple and trouble-free operation. 4. Online measurement and recording of process parameters. After treatment Moisture PPM 3 Gas content% 0.01 Impurity size µm ≤ 1 (no free carbon) Breakdown voltage kV ≥ 75 IFT dyne / cm ≥ 40 Acid number mgKOH / g ≤ 0.03 Dielectric loss factors tan δ (90 ° C) ≤ 0.001 ASSEN warrants a unit supplied in accordance with this specification against defects in material and workmanship under normal use and service for a period of twenty-six (26) months from date of shipment or twenty-four (24) months after start-up. systems. ... ASSEN's obligations under this warranty are limited to repairing or furnishing a similar part to replace any part proven to be defective during the warranty period. 1. We customize the machine according to your requirements. 2. We have over 20 years of export experience. 3. We offer our customers high quality products at a competitive price. 4. We offer excellent after-sales services to our customers. 5. We are not satisfied until our customers are satisfied.
LLC PK "Aurora Electro"
Russia
Specify the price
USD
0
0
The transformer is designed to power a 6-zone electric ferrite roasting furnace with a vertical load with a maximum power of 84 kVA and a phase voltage of 150V; 200V; 250 V.
LLC PK "Aurora Electro"
Russia
Specify the price
USD
0
0
The TS-100/10-UHL3-6 / 0.4 transformer is intended for use in alternating current circuits with a frequency of 50 or 60 Hz. SPECIFICATIONS: Rated value of high voltage, kV 6 Low voltage rated value, kV 0.4 Rated power, kVA 100.0 Number of phases 3 Mains frequency, Hz 50 HV D winding connection diagram Connection diagram of the LV windings Yн Insulation temperature class F Temperature protection 3 pt100 sensors in the windings block "Termodat 11M3T1" Cooling natural air Enclosure protection class IP00 Coil material aluminum Overall dimensions, mm: Length 940 Depth 650 Height 950 (1050) Estimated weight, kg 520
LLC PK "Aurora Electro"
Russia
Specify the price
USD
0
0
Transformer TC3-160 / 0.66-UHL3-380 / 400 is designed for use in alternating current circuits with a frequency of 50 or 60 Hz. SPECIFICATIONS Rated value of high voltage, V 400 Low voltage rated value, V 380 Rated power, kVA 160.0 Number of phases 3 Mains frequency, Hz 50 Connection diagram of HV windings Yн Connection diagram of the LV D windings Insulation temperature class F Temperature protection Termodat 11M3T1 BKT Cooling natural air Enclosure protection IP23 Coil material aluminum Overall dimensions, mm: Length 890 Depth 890 Height 1030 Estimated weight, kg 570
Suppliers in this category
All suppliers in the category
Product:
Supplier:
Min. order:
Directory
Marketing department:
Marketing department:
Marketing department:
Information
Inform manager that you found the product on Qoovee
The contact details of the supplier is not available!
Send message