{name} in bulk on Qoovee

LED street light SKU01 “Street” 150w Specifications Power consumption: 150W Current consumption: 630mA Voltage: ~ 85V-265V Luminous flux: 19500lm Degree of protection: IP65 Color Temperature: 5700K Color Rendering Index: & gt; 0.9Ra Life: 50,000 hours Temperature Range: -50C ; + 50С Weight: 4.7kg Dimensions: 860x330x85mm Mounting type: Console Mounting diameter: up to 62mm

LED street light SKU01 “Street” 100w Specifications Power consumption: 100W Current consumption: 420mA Voltage: ~ 85V- 265V Luminous flux: 13000lm Degree of protection: IP65 Color Temperature: 5700K Color rendering index: & gt; 0.9Ra Service life: 50,000 hours Temperature range: -50C; + 50С Weight: 3.8kg Dimensions: 720x280x85mm Mounting type: Console Mounting diameter: up to 62mm

LED floodlight SKU01 “Projector” 200w Specifications Power consumption: 200W Diffusion angle: 12 ° or 24 ° Current consumption: 900mA Voltage: ~ 85V-265V Luminous flux: 26000lm Degree of protection: IP66 Color Temperature: 6000K Color rendering index: & gt; 80Ra Service life: 50,000 hours Temperature range: -30C; + 50С Weight: 5.3kg Dimensions: 420x320x100mm Mounting type: Depends on fastening

LED floodlight LED SKU01 “Projector” 100w Specifications Power consumption: 100W Scattering angle: 12 ° or 24 ° Consumption current: 450mA Voltage: ~ 85V-265V Luminous flux: 13000lm Protection grade: IP66 Color Temperature: 6000K Color rendering index: & gt; 80Ra Service life: 50,000 hours Temperature range: -30C; + 50C Weight: 2.83kg Dimensions: 350x283x85mm Mounting type: Depends on mounting

LED floodlight SKU01 “Projector” 150w Specifications Power consumption: 150W Diffusion angle: 12 ° or 24 ° Current consumption: 680mA Voltage: ~ 85V-265V Luminous flux: 19500lm Degree of protection: IP66 Color Temperature: 6000K Color rendering index: & gt; 80Ra Service life: 50,000 hours Temperature range: -30C; + 50С Weight: 5kg Dimensions: 420x230x100mm Mounting type: Depends on fastening < / p>

Recommended suspension height of the luminaire from 8m. up to 25m. Industrial LED luminaire SKU01 “Prom” 200w Specifications Power consumption: 200W Current consumption: 900mA Voltage: ~ 85V-265V Luminous flux: 26000lm Degree of protection: IP54 Color Temperature: 5700K Color Rendering Index: & gt; 80Ra Lifetime: 50,000 hours Temperature range: -20C; + 50С Weight: 6.4kg Dimensions: 500x125x290mm Mounting type: Depends on fastening

Recommended suspension height of the luminaire from 8m. up to 25m. Industrial LED luminaire SKU01 “Prom” 150w Technical characteristics Power consumption: 150W Current consumption: 680mA Voltage: ~ 85V-265V Luminous flux: 19500lm Degree of protection: IP54 Color Temperature: 5700K Color Rendering Index: & gt; 80Ra Lifetime: 50,000 hours Temperature range: -20C; + 50С Weight: 4.6kg Dimensions: 750x125x140mm Mounting type: Depends on fastening

Recommended suspension height of the luminaire from 8m. up to 25m. Industrial LED luminaire SKU01 “Prom” 100w Specifications Power consumption: 100W Current consumption: 450mA Voltage: ~ 85V-265V Luminous flux: 13000lm Degree of protection: IP54 Color Temperature: 5700K Color Rendering Index: & gt; 80Ra Lifetime: 50,000 hours Temperature range: -20C; + 50С Weight: 3.2kg Dimensions: 500x125x140mm Mounting type: Depends on fastening

Recommended suspension height up to 7m. LED luminaire SKU01 “Classic” 100w Specifications < / strong> Power consumption: 100W Current consumption: 460mA Voltage: ~ 85V-265V Luminous flux < / li> Temperature range: -50C; + 50С Weight: 4.77kg Dimensions: 630x218x107mm Mounting type: Depends on fastening

LED luminaire SKU01 “Classic” 80w Specifications Power consumption: 80W Current consumption: 360mA Voltage: ~ 85V-265V Luminous flux: 10400lm Degree of protection: IP65 Color Temperature: 5700K Color Rendering Index: & gt; 80Ra Lifetime: 50,000 hours Temperature Range: -50C; + 50С Weight: 3.75kg Dimensions: 510x218x107mm Mounting type: Depends on mounting Recommended suspension height up to 7m.

LED luminaire SKU01 “Classic” 50w Specifications Power consumption: 50W Current consumption: 230mA Voltage: ~ 85V-265V Luminous flux: 6500lm Degree of protection: IP65 Color Temperature: 5700K Color rendering index: & gt; 80Ra Service life: 50,000 hours Temperature range: -50C; + 50С Weight: 2.33kg Dimensions: 630x77x107mm Mounting type: Depends on mounting Recommended suspension height up to 7m.

Recommended suspension height up to 7m. LED luminaire SKU01 “Classic” 40w Specifications Power consumption: 40W Current consumption: 180mA Voltage: ~ 85V-265V Luminous flux: 5200lm Degree Protection: IP65 Color Temperature: 5700K Color Rendering Index: & gt; 80Ra Lifetime: 50,000 hours Temperature Range: - 50C; + 50С Weight: 2.05kg Dimensions: 510x77x107mm Mounting type: Depends on fastening

Electric marker for metal, technical name spark marker, abbreviated EIM Electric marker for metal introduces a new, improved electric spark marker marker of our own production. Electric marker for metal, EIM is intended for: < / strong> for manual application of alphanumeric information on various metals of arbitrary configuration instead of mechanical stamping. The spark marker consists of: power supply electric vibrator with replaceable steel wire tip titanium, zirconium, steels (stainless, alloy, tool, carbon), copper , aluminum and their alloys, tinplate, galvanized iron, etc. parts and their assemblies tools: locksmith, cutting, measuring, surgical, dental printed circuit boards < / li> tags, nameplates vacuum and semiconductor devices for the production of artistic drawings Markings are not subject to corrosion.

Concrete heating station SPB-100 The SPB-100 concrete heating transformer (station) is the most powerful and efficient station in low temperatures, it has the ability to serve large construction areas and is indispensable in industrial construction in the ambient temperature range from +10 to -40C. The company "ETA" produces this model with transformer windings made of copper (Cu) or aluminum (Al). The cost of each of the presented stations is the manufacturer's price and depends only on the material of manufacture. Both versions are designed for a power of 100 kW, consumed from a three-phase alternating current network with a voltage of 380 V. The maximum power in its class allows this device to be used on large construction sites and to conduct continuous work to heat concrete or soil in the maximum possible volume. Convenience of setting and adjusting operating modes is a distinctive feature of the entire range of concrete heating stations produced by ETA LLC. A well-thought-out frame design, the presence of eyebolts on the body of the device and the compactness of the installation (with the highest power characteristics) ensure high reliability and unpretentiousness of the SPB 100 station, outstanding performance characteristics and ease of transportation. Another important advantage is the possibility of installing forced air cooling of the station transformer, which increases the reliability and continuous operation time of the product. Forced cooling is not included in the standard delivery set of the SPB-100 station transformer for heating concrete, it is auxiliary and is installed by the manufacturer for an additional fee at the request of the customer. Specifications SPB - 100 (Al) SPB - 100 (Cu) Supply network 380 V, 50Hz, 3 phases 380 V, 50Hz, 3 phases Load power, kW one hundred one hundred Number of steps of output line voltage four four Output line voltage, V 35, 45, 60, 80 35, 45, 60, 80 Load current at any stage, no more, A 725 725 Working hours Continuous Continuous Primary power, kW 103 103 Weight, kg 385 420 Overall dimensions (lxwxh), mm 770х780х1100 770х780х1100 Mains cable core section, mm 2 fifty fifty Section of load wires (from the output terminals of the station), mm 2 190 (2x95) 190 (2x95) Degree of protection IP23 IP23 Air cooling compulsory compulsory

Heating station SPB-80 designed for large volumes of construction work and has high technical characteristics. Its main load element is a step-down transformer, which allows you to gradually regulate the heating process. A cable acts as a working element, through which an electric current flows, heats the concrete to the desired temperature and creates comfortable conditions for curing. The stations are used both in the cold season and at positive temperatures, allowing to significantly speed up the construction process. When this particular equipment is included in the work, the construction time is noticeably reduced, the productivity increases. Station SPB 80 is also used for warming up soils in the cold season. Specifications SPB - 80 SPB - 80 (Cu) Supply network 380 V, 50Hz, 3 phases 380 V, 50Hz, 3 phases Load power, kW 80 80 Number of steps of output line voltage four four Output line voltage, V 35, 45, 60, 80 35, 45, 60, 80 Load current at any stage, no more, A 580 580 Working hours Continuous Continuous Primary power, kW 83 83 Weight, kg 340 385 Overall dimensions (lxwxh), mm 770х780х1100 770х780х1100 Mains cable core section, mm 2 35 35 Section of load wires (from the output terminals of the station), mm 2 140 (2x70) 140 (2x70) Degree of protection IP23 IP23 Air cooling compulsory naturally

Station transformer for heating concrete SPB-40 In connection with the widespread intensive construction of private, residential multi-apartment and industrial buildings and other reinforced concrete structures, there is an urgent need to warm up concrete in winter and accelerate the processes of hardening of structures. An irreplaceable assistant in this matter will be a transformer station for heating concrete SPB-40. Basically, this device is used not only in the cold season, but is also used to accelerate the pace of construction in the range of ambient temperatures from +10 to -40C. The average power of this device allows it to be used both in the private sector and in the course of mass construction. The device is distinguished by its simplicity and reliability of design, ease and convenience of switching heating modes. The presence of slinging eye-clamps on the body allows increasing the mobility of the station within the construction site and simplifies its transportation and handling. The SPB-40 concrete heating transformer station is equipped with control devices for the supplied current. The SPB-40 concrete heating station is manufactured with a dry-type transformer in two versions: with aluminum and copper windings. Natural air cooling and the presence of a circuit breaker in the design make the device extremely safe even in the most difficult operating conditions. Specifications SPB - 40 (Al) SPB - 40 (Cu) Supply network 380 V, 50Hz, 3 phases 380 V, 50Hz, 3 phases Load power, kW 40 40 Number of steps of output line voltage four four Output line voltage, V 35, 45, 60, 80 35, 45, 60, 80 Load current at any stage, no more, A 290 290 Working hours Continuous Continuous Primary power, kW 42 42 Weight, kg 310 345 Overall dimensions (lxwxh), mm 770х780х1100 770х780х1100 Mains cable core section, mm 2 16 16 Section of load wires (from the output terminals of the station), mm 2 50 (2x25) 50 (2x25) Degree of protection IP23 IP23 Air cooling natural natural

Transformer station for concrete heating SPB-20 The station is "the youngest" in its family both in terms of its weight and dimensions, as well as in terms of energy consumption and power. The use of this station will not only significantly reduce the construction time of small reinforced concrete structures on an individual site, but will also help to provide temperature conditions for the correct hardening of cement in all types of small construction at ambient temperatures from +10 to -40C. If you need to buy a concrete heating station that can be easily moved by one person within a small construction site and provide electric heating of hardened concrete with a relatively low power consumption due to its low power, then this device will meet all the listed requirements. The SPB-20 heating transformer station provides heat treatment of concrete by supplying voltage to the special PNSV electric wires pre-installed in the formwork. The productivity of the concrete heating method with the embedded heating wire depends on the ambient temperature, the presence or absence of additional heat-insulating surfaces, the amount of reinforcement, and ranges from 0.4 to 1.0 m3 of concrete per 1 kW of the station's load power. Specifications SPB - 20 Supply network 380 V, 50Hz, 3 phases Load power, kW 20 Number of steps of output line voltage four Output line voltage, V 35, 45, 60, 80 Load current at any stage, no more, A 145 Working hours Continuous Primary power, kW 20 Weight, kg 120 Overall dimensions (lxwxh), mm 520x615x685 Mains cable core section, mm 2 four Section of load wires (from the output terminals of the station), mm 2 25 Degree of protection IP23 Air cooling natural

LED street lamps

LED lamps-industrial

Cable cross-section: 0.5 Color: black / white Internal and external available, price is the same We work with VAT / excluding, cash / non-cash

Cable jack DK-5V screw is a mobile lifting mechanism designed for lifting cable drums when laying cable. The cable jack can also be used as a pay-off device when rewinding the cable. The cable jack DK- 5V allows the use of standard sizes of drums from 8 to 22 numbers. The lifting capacity of the screw jack is 5 tons. Completion of the jack for unwinding cable drums DK-5V: two racks; axis; movable shoes NAME OF PARAMETER VALUE Maximum lifting capacity, kg, not more 5000 Lifting principle screw pair Maximum standard size of cable reel 22 Minimum cable reel size 8 The presence of hold-down shoes + Diameter of the supplied axle, mm 48 Length of the supplied axle, mm 1700 Cable jack weight, kg one hundred Overall dimensions, mm 1440х715х1400

Cable winding device UNK-4-2N mod.2 is a hand-operated winding machine, light class, designed for winding and measuring cables with a maximum diameter of 20 or 30 mm, depending on the modification. The winding device UNK-4-2N mod.2 is designed for cable rewinding from coil to coil weighing not more than 30 kg. To facilitate the removal of the coil, the cable winding device is equipped with a convenient folding handle (in the BASIC version). Technological control of the length is carried out with an IDM-20 or IDM-30 meter, the meters are implemented on an ID-2 electronic counter. The delivery set of the UNK-4-2N cable rewind device mod.2 includes: frame, take-up drum, giving drum, length meter, electronic counter ID-2. The winding device UNK-4-2N mod.2 is produced in two modifications: BASIC PACKAGE - special price RUB 13,200 with VAT rotating folding handle on the take-up drum, certified length gauge IDM, reverse counter ID-2 with sound indication upon reaching the programmed length. LIGHT COMPLETE SET - special price RUB 12,000 with VAT non-certified IDM length meter, non-reversible counter ID-2, without sound indication. Cable winding machine UNK-4-2N mod. 2 patented (more) Measuring unit IDM is patented and has a certificate of type approval of measuring instruments (more) - for modification BASIC

Аккумуляторная батарея Delta GX 12-12 (12V, 12Ah)ХарактеристикиГабаритыВес, кг:3,67Габариты:151x98x101габариты (ДхШхВ):151x98x101Прочееемкость (Ah):12напряжение (V):12

Аккумуляторная батарея Delta DTM 1212ХарактеристикиГабаритыВес, кг:3,8Габариты:151x98x101габариты (ДхШхВ):151x98x101Прочееемкость (Ah):12напряжение (V):12

Аккумуляторная батарея Delta HRL 12-7,2ХарактеристикиГабаритыВес, кг:2,6Габариты:151x65x100габариты (ДхШхВ):151x65x100Прочееемкость (Ah):7.2напряжение (V):12

Герметизированный клапанно-регулируемый необслуживаемый свинцово-кислотный аккумулятор 12 FGH 23, электролит которого абсорбирован в стекловолокнистый наполнитель, служащий одновременно сепаратором (технология AGM). Аккумулятор 12 FGH 23 полностью удовлетворяют всем требованиям, предъявляемым к герметизированным батареям, не требуют обслуживания и долива воды в течение всего срока службы. Возможна эксплуатация аккумуляторных батарей в любом положении.Области применения:• Источники бесперебойного питания;• Системы охранно-пожарных систем;• Медицинская техника;• Телекоммуникация и связь;• Многие другие отрасли, где требуется гарантированное электропитание.Основные характеристики аккумулятора 12 FGH 23:• Низкое газовыделение, благодаря высокой степени рекомбинации газов (99%);• Низкое внутреннее сопротивление;• Отличные характеристики при разряде высокими токами;• Отсутствие ограничений при транспортировке железнодорожным, автомобильным, морским и авиатранспортом (согласно IATA)ХарактеристикиГабаритывес (кг.):2Габариты:90x70x102габариты (ДхШхВ):90x70x102Прочееемкость (Ah):5напряжение (V):12Технология:AGMтип:свинцово-кислотныйтип клемм:ножевые

Аккумуляторная батарея Delta HR 6-12ХарактеристикиГабаритыВес, кг:1,95Габариты:151х50х94габариты (ДхШхВ):151х50х94Прочееемкость (Ah):12напряжение (V):6

Герметизированный клапанно-регулируемый необслуживаемый аккумулятор FG 10451, электролит которого абсорбирован в стекловолокнистый наполнитель, служащий одновременно сепаратором – технология AGM. Не требует обслуживания и долива воды в течение всего срока службы. Возможна эксплуатация аккумуляторных батарей в любом положении. Области применения:• Источники бесперебойного питания;• Системы охранно-пожарных сигнализаций;• Медицинская техника;• Телекоммуникация и связь;• Аккумулятор для весов;• Многие другие области, где требуется гарантированное электропитание. Основные характеристики аккумуляторов FG 10451:• Низкое газовыделение благодаря высокой степени рекомбинации газов (99%);• Низкое внутреннее сопротивление;• Отличные характеристики при разряде высокими токами;• Отсутствие ограничений при транспортировке железнодорожным, автомобильным, морским и авиатранспортом (согласно правилам IATA).ХарактеристикиГабаритывес (кг.):0.725Габариты:70х47х100габариты (ДхШхВ):70х47х100Прочееемкость (Ah):4.5напряжение (V):6Технология:AGMтип:свинцово-кислотныйтип клемм:ножевые

Electric cooling fans with a supply voltage of ~ 220V, rolling bearings are installed (unless otherwise specified), the casing is made of aluminum alloy. Designed to provide forced ventilation of control cabinets and blowing of cooling radiators for electronic control units of CNC machines and automation systems. Models are available in various sizes and capacities.

Electric cooling fans with 12V supply voltage, roller bearings (unless otherwise specified), plastic housing. Designed to provide forced ventilation of control cabinets and blowing of cooling radiators for electronic control units of CNC machines and automation systems. Models are available in various sizes and capacities.

Frequency tachometer with relay output 3A / 220V and programmable alarm. Measuring frequencies 0.1-5000Hz and speed 6-9999RPM. Display 4 characters. Dimensions 48x98x100mm. Weight 0.33kg.

Temperature controller with relay output 3A / 220V and 2 programmable alarms. Universal TC and RTD thermocouple input, PID temperature control algorithm with auto tuning. RS-485 Modbus RTU. Dimensions 72x72x100mm. Weight 0.34kg.

A specialized temperature controller for a refrigeration plant or warehouse with three relay outputs 10A / 220V and 1A / 220V. Control of heater, refrigeration compressor, ventilation and lighting. Manual and automatic heating and cooling functions. Includes two thermocouples. Dimensions 36x72x86mm. Weight 0.25kg.

Digital metering panel for sensors. Tc, RTD, voltage or current inputs. Display 4 + 4 characters. Correction of decimal point position, scale, measuring range and zero. 2 programmable alarm outputs, RS-485 Modbus RTU. Dimensions 48x96x100mm. Weight 0.3kg.

Digital metering panel for sensors. Voltage input 0 ... 10V or current 4 ... 20mA. Display 4 + 4 characters, -1999 ... 4000 MAX. Correction of decimal point position, scale, measuring range and zero. 2 outputs of programmable alarm with hysteresis. Dimensions 48x96x100mm. Weight 0.45kg.

Digital measuring panel for linear sensors. Voltage input 0 ... 10V. Display 4 characters, 1999 MAX. Correction of decimal point position, scale, measuring range and zero. Performance - 2.5 measurements per second. Dimensions 48x96x70mm. Weight 0.26kg.

BLDC motor driver 50V / 15A. Reverse and braking control. Speed control with potentiometer, analog voltage input or PWM. Speed signal output - frequency, alarm output. Protection against short circuit of the stepper motor windings, against the back EMF of the motor. Designed for BLF series engines.

BLDC motor driver 50V / 15A. Reverse and braking control. Engine management with and without Hall sensors. Speed control via an analog input using a potentiometer. Speed signal output - frequency, speed indication. Designed for BLM series engines.

36V / 8A BLDC motor driver. Reverse and braking control. Engine management with and without Hall sensors. Speed control via an analog input using a potentiometer. Speed signal output - frequency. Designed for BLM series engines.

The PLZ025 module is designed for power regulation (~ 220V, up to 2 kW) in the load. Built-in soft start function, power control method - FIM. Designed to adjust power both in resistive loads (heating elements, incandescent lamp) and reactive loads (electric motors). A simistor is used as a control element. Voltage control 0 ... 10V, from the PLP-D1 or RS485 control panel. Galvanic isolation of control circuits.