Unified Components and Parts in bulk on Qoovee

Cryogenic check valves of mechanical action CADUCEUS with an innovative design are used to prevent changes in the flow of the medium in the process system, ensure its stable operation both in normal operation and in the event of an emergency drop in pressure in one of the pipeline sections. This type of protective pipeline fittings is made of stainless steel and materials that are resistant in a cryogenic environment at operating pressures and temperatures, which guarantees the tightness of the product and a long service life. A wide model range allows you to select fittings for operating pressures up to 63 bar, for nominal diameters from 20 to 40. The products are certified according to GOST 54808 and GOST 9544.

Shut-off valves CADUCEUS perform the function of shutting off the flow of the working medium on the lines of filling cryogenic tanks, as well as shutting off individual sections of pipelines or consumers for the possibility of quick maintenance of equipment or mains. Due to the detailed study of design solutions, the maximum tightness and reliability of the shut-off valves are ensured, given that the working pressure of the cryogenic shut-off valve can reach 50 bar at operating temperatures in the range from -196 ° C to + 120 ° C. Based on the needs of the customer, products can be manufactured with flanged or butt welded joints. Cryogenic globe valves CADUCEUS are made of stainless steel, which makes the design more wear-resistant and guarantees long-term operation. Products are certified according to GOST 34294-2017 and GOST 24856-2014

Propane reducer CADUCEUS BPO-5 is a device used to reduce the pressure of propane coming from a cylinder to a predetermined value, as well as to regulate and automatically maintain it at a constant level. The maximum throughput of the balloon pressure regulator is 5 m³ / h, while the maximum value of the gas pressure at the inlet to the reducer can reach 2.5 MPa, and the highest working pressure is 0.4 MPa. The pressure indicators at the outlet of the reducer are quickly and accurately determined using the pressure gauge, which is equipped with the device. Single-stage propane cylinder pressure regulator CADUCEUS BPO-5 is connected using a union nut SP 21.8x1 / 14 LH (left) using a PTFE seal. The universal nipple allows connection of 6/9 mm gas hoses. Reducer CADUCEUS BPO-5 is manufactured in climatic version UHL in accordance with GOST 15150 from brass, which ensures long-term and reliable operation at temperatures from -25 ° C to + 50 ° C. The manufacturer's warranty period is 18 months from the date of manufacture.

Oxygen reducer CADUCEUS BKO-50 is a device used to reduce the pressure of oxygen coming from a cylinder to a predetermined value and automatically maintain it at a constant level. The high-strength body made of brass ensures the reliability and durability of the device, and the connection to the cylinder using a union with a union nut G 3/4 using a fluoroplastic seal ensures tightness of the connection, eliminating gas leaks. The maximum throughput of the oxygen cylinder pressure regulator is 50 m³ / h, while the highest gas pressure at the inlet to the reducer reaches 150 bar, and the highest working pressure is 12 bar. Oxygen balloon reducer CADUCEUS BKO-50 is equipped with two pressure gauges that allow to quickly and accurately determine the pressure indicators at the inlet and outlet of the reducer. The possibility of connecting 6 or 9 mm gas hoses makes it easy to work with the necessary equipment. Oxygen reducer CADUCEUS BKO-50 is manufactured in climatic version UHL in accordance with GOST 15150 for operation at temperatures from -25 ° C to + 50 ° C. The manufacturer's warranty period is 18 months from the date of manufacture.

An oxygen reducer is used to lower the pressure from the indicators when oxygen is in the gas distribution pipeline to the desired level. One of the functional purposes of the device is also to automatically maintain the set pressure value, regardless of what indicators the oxygen has inside the network. Medical oxygen reducer CADUCEUS SKO-150 is a reliable and functional device with a maximum throughput of 150 cubic meters per hour. The brass body ensures the safety of the system at the highest gas inlet pressure of 25 bar. The presence of a pressure gauge with a convenient scale allows reading the outlet pressure, which can be reduced to a level in the range from 1 to 6 bar. An additional hole in the cover of the network regulator for venting pressure to atmosphere in the event of a diaphragm rupture ensures safe use of the device. The warranty period for the product is 24 months with the possibility of its subsequent service. The oxygen network single-stage reducer CADUCEUS SKO-150 is manufactured in Russia and meets the requirements of GOST 13861-89.

Industrial machinery equipment

Shandong Kat drilling tools Co., Ltd. is a professional enterprise engaged in rock drilling tools, mining tools and rotary drilling tools. We are willing to create a better future with high quality and low price products, advanced production technology, perfect after-sales service and honest business philosophy! The rock drilling tools, down the hole drilling tools and mining machine tools produced by the company are widely used in the fields of tunneling, drilling, mining, railway, highway, hydropower and other basic energy construction.

IDP has been working with a number of motor manufacturers for a long time. Whether it is a DC motor, a stepping motor or a brushless motor, our experience with various motors allows us to select the most suitable one to pair with the gearbox for the application.

O-rings currently on the market often fail to meet the sealing requirements of IDP, especially with regard to the sealing effect on the rotating shaft. As a result, IDP has developed its own line of well-sealed, wear resistant O-rings to enhance the efficiency of the gearbox and the pump.

IDP utilizes special engineering plastics to make low-friction and high strength nuts. We also adjust thread parameters to minimize the gap. The screw nut set we produce can replace most of the applications of ball screws for just a third of the cost.

With more than 30 years of experience in gear motor design, IDP team is committed to designing the best drive system for customers. Our engineers specialize in designing high-efficiency and low-noise gearboxes. In addition to gear accuracy, there are many other factors to consider, such as gear clearance optimization, appropriate match of gear types and materials, tooth profile adjustment, seal design, appropriate selection of greases, bearings and bushings, etc.   We understand that only good gearbox design can achieve the best balance between output torque, efficiency, durability, volume and weight.   1. A large overall ratio can be achieved with only a few stages 2. Good mesh effectiveness 3. Operate silently and smoothly 4. Self-locking

With more than 30 years of experience in gear motor design, IDP team is committed to designing the best drive system for customers. Our engineers specialize in designing high-efficiency and low-noise gearboxes. In addition to gear accuracy, there are many other factors to consider, such as gear clearance optimization, appropriate match of gear types and materials, tooth profile adjustment, seal design, appropriate selection of greases, bearings and bushings, etc.   We understand that only good gearbox design can achieve the best balance between output torque, efficiency, durability, volume and weight.   1. High load capacity 2. Higher stability 3. Low inertia

The mold parts we like to use are DME, INCOE, Husky, Mold Masters, etc., high quality and internationally renowned company brands. Ensuring mold quality and customized service is always our core value. The details of the mold include choice 3-plate mold or 2-plate mold, the hydraulics design, the direction of the slider, sprue diameter, runner and venting design, the draft angle, the matching with the injection molding machine, the thickness of the stencil, and the smooth push of the product using the ejectorpin, etc. Every design element on an injection mold affects production and products.And we are reluctant to let plastic products appear short shots, sinks, burns mark, deformations, flash, and even press or water problems etc. You can discuss it in detail with any of Pacmold's engineers and you will get a quick response.

Gas assist mold with a thick 1 x ½ inch section. How does the plastic finished product withstand the vibration shock of the motor? How does the plastic case protect the board as much as possible when the user drops or bumps? Monochrome is very boring? Perhaps a two-color mold can be used to attract consumers. In addition to high impact and appearance considerations, molds for power tools need to be of high quality. In addition to being able to produce quickly, it is necessary to greatly reduce the problems that may arise during the production process.

All of these parts required multiple slides and core pulls. Automotive parts are rigorously tested. There is no defect in appearance, which is the user's first instinct for the product. Therefore, the polishing process and surface process of our mold will take a lot of time. It is worth mentioning that the mold must have long-life production conditions. Because the mold design is approved by the customer. It must produce at least 500,000 to 2,000,000 good plastic parts that can be produced by molding, which is a very easy to implement design and fabrication condition for Pacmold. The molds designed by Pacmold can also be customized according to the customer's production conditions, greatly increasing the production speed.

Rearview Mirror and A/C Controller Mold Automotive Plastic Mold Rearview and A/C controller have multiple lifters and run automatic.   Automotive parts are rigorously tested. There is no defect in appearance, which is the user's first instinct for the product. Therefore, the polishing process and surface process of our mold will take a lot of time. It is worth mentioning that the mold must have long-life production conditions. Because the mold design is approved by the customer.It must produce at least 500,000 to 2,000,000 good plastic parts that can be produced by molding, which is a very easy to implement design and fabrication condition for Pacmold. The molds designed by Pacmold can also be customized according to the customer's production conditions, greatly increasing the production speed.

forged cylinders

forged bars

forged shaft

forged flange

forged gear ring

Fuse box (2 inserts, 90-60 A) Article: BPR-2M1 F5.3722.005-02 Manufacturer: Copier

Speed sensor GAZ-3110, GAZ-3302 Business (6 imp / rev, round connector) Article: 342.3843 Manufacturer: Schetmash

Diode bridge VAZ-2110-12 gen. 9402, 9412 (Orbit) Article: BVO 3 105-01 Manufacturer: Orbit

PC "Aurora Electro" LLC produces electromagnetic chokes (reactors) for various purposes in the widest range of characteristics in accordance with the customer's specifications. We release Smoothing chokes. They are used in direct current circuits and are used to smooth out ripples that arise, including when using various single-phase and three-phase rectification circuits. Three-phase AC chokes (motor, mains, compensation) . Mains reduce the mutual influence of semiconductor converters in one network, reduce the rate of rise of inrush currents, compensate for capacitive currents of long cables. Motor reduce the heating of electric motor windings caused by high-frequency pulsations from frequency converters, limit the amplitude of short-circuit currents. Compensating ones are used to protect capacitors in reactive power compensation installations from high-frequency voltage components. Single-phase AC chokes. Chokes of the widest application according to your specification!

Twist Locks as per ECC ADD AAC

Twin lobe rotor used for blowers as well as vehicles

Used in automobile 

Twin lobe rotor is a engine heart component of blowers  used at various applications it is a pair product

Hydraulic manifolds of critical accuracy upto 30 microns

We manufacture Hard Chrome plated shafts from 8mm diameter to 200 diameter with lenght up to 5 meters. We get our bearings contract manufactured under brand name HVD (Four point contact Sleeving Bearing, Deep groove ball bearing, Taper roller bearing, Spherical roller bearing) Sole distributor for Alwayse Engineering Ltd UK for their ball transfer units. (PAN INDIA AND MIDDLE EAST) Distributor for Colson Caster wheels. Distributor for Nippon Bearing Corporation Japan. Distributor for HIWIN

Producer

We are supplier of big to small size forging rings of any grade of iron stainless steel to mild steel. With demanded hardness and proof to finish machininh size.

DEAKS - Retractable blocker (lock) is used for additional protection of windows. Easy to install and simple mechanism. Product Features: This product uses durable materials that can withstand pressures up to 350 kilograms. In order to open the lock, you need to pull the handle towards you and release it down. * Attention - the price of the product changes, please check the price before ordering!

"Lux" lock blocker is a reliable protection of windows and doors from sudden opening by children and anti-burglar protection of your home. Easy to install and simple mechanism. Product Features: The composition of this product uses durable materials that can withstand pressure up to 350 kilograms. In order to open the lock, you need to press the button from above and pull the handle down. * Attention - the price of the product changes, please check the price before ordering!

From stock and on order we supply spare parts for diesel engines of the 4CH 10.5 / 13 series: Name of parts and assembly units and designation Crankshaft 962.02.101 Washer1ch2.0540 Oil deflector150.02.104 Gasket160.03.012 Ring962.03.114 Thrust ring4ch1.0114 Thrust ring4ch1.0115 Insert core4ch1.0112-4ch1.0162 Connecting rod liner457.04.109-110 Compression ring (chrome.) 962.04.114 Compression ring962.04.102 Oil scraper ring962.04.022 Oil scraper ring (scraper.) 962.04.103 Locking ring1ch2.035 Piston pin ГШ1326.0.0 Connecting Rod Bolt1ch2.0310 Connecting Bolt1ch2.0310 Connecting Bolt1ch2.0310 Cylinder Head bore962.05.000-1 Cylinder head962.05.001-1 Rocker arm 962.05.021-1 Cylinder head (with valve) 962.05.023-1 Intake valve160.05.127 Exhaust valve160.05.134 Valve bushing962.05.108 Valve spring (external.) 962.05.1.128 Valve lock 160.05.131-1 Spring plate1ch2.0411 Gasket962.05.174-1 Gasket962.05.176 Oil pump360.10.000 Internal pump167.11.000 Impeller wheel260.11.002 Nut150.11.159 circlip150.11.120 Washer150.11.112-2 Packing gland 756.117166. 11.118-1 Spring756.11.115 Gear4ch2.099-1 Oil cooler filter drain KR-2-1305000 Water cooler862.54.000-1 Pack of tubes962.54.042 O-ring664.54.116 corrugated glass ТЗ-190-3,5MPа High-pressure pipe962.20.001 ... .004 Checker150.23.104 Outboard water pump167.31.000 Krylchatka260.31.005 Gear wheel260.31605 1 Injector 962.25.000-3 Sprayer184.25.001 StarterST-25 Voltage regulator RL-2m-1 Voltage regulator (electronic) RL-N-1 Speed relay (electronic) RS-E Electronic tachometer TNVD260.44.000 TNVD260.24.000 TNVD861.24.000-1 TNVD260 .74.000 Plunger pair -24 Oil pump MZN-2657.17.026 Charging generator GSK-1500M Tachometer and indicating device D-4, D-5 TMi3M Gear1ch2.0215-1 Gear4ch2.0222-1 Gear4ch2.052-1 Gear4ch2.053-1 Gear146.042.002 -2 Gear4h2.0750-1 Gear360.08.021

Spare parts for diesel generators of the following modifications are on sale: Name of parts and assembly units Designation DGA-50M2-9R; DGR-75M2 / 1500P; DGR-75M2 / 1500-1; DGA-50M2-9; DG-50M2-1; DGA-25M1-9; DGR1A25 / 1500PM3; DGR1A25 / 1500M3; DGMA-100M2-3; DG100-1-02; DG100-1-01; DGA-3-100M2; DGA-2-100M2; DGA-100M2; DGMA-75M2-4; DG-75M2-3; DG-60-1; DGMA-50M2-3; DGMA-48M2-3; DGA-3-48M2; DGA-2-48M2; DGA-48M2; DGMA-25M1-3; DGA-3-24M1; DGA-2-24M1.

The Agromash Inter company offers an oxygenator (oxygen cone) with a productivity of 70 m3 per hour for your fish breeding complex. The oxygenator is designed to oversaturate water with oxygen up to 300%. Oxygen cone (oxygenator) is made from fiberglass. Oxygen cones are used at ultrasonic testing enterprises (installations with closed water supply) for intensive cultivation of sturgeon, sterlet, bester, trout, and Russian sturgeon. A design feature is that the direction of water in the oxygenator is oriented from top to bottom. Due to the decrease in the flow velocity in the cone, an equilibrium is established between the lifting force of the oxygen bubbles and the water flowing down. Bubbles remain in suspension, thereby achieving optimal oxygen saturation of the water. The operating pressure in the oxygenator is controlled by a valve installed at the inlet. Price: 80 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers for your fish farm an incubation apparatus of the tray type IL-4 Trout. The device is intended for incubation of sturgeon caviar and separation of viable larvae after hatching. In devices of this type, it is convenient to carry out all operations with caviar, as well as maintain free embryos and grow larvae until complete transition to active nutrition. The devices can be placed one above the other in 4 pieces. in a row. Water consumption is 0.005 l / s per 1 thousand eggs or from 0.17 to 0.2 l / s per 1 incubation tray. Price: 45 000 rubles Contact person: Nikolay Aleksandrovich LLC Agromash inter

The Agromash Inter company offers the Sturgeon apparatus for your incubation workshop. The incubator is intended for incubation of sturgeon roe and separation of viable larvae after hatching. The principle of operation of the incubator: thanks to gusty normalized water supply, the fertilized, de-greased sturgeon caviar is continuously washed, simulating natural conditions. The sturgeon incubator, depending on the needs, can be equipped with 1, 2, 4, 6, 8, 16 trays. Each device is made of stainless steel, which is the key to long-term operation. Price: do not specify Contact person: Nikolay Aleksandrovich LLC Agromash inter