Filter element FLOW 63/508 (SL20) - 6043

DuPont™ Tyvek® 500 Hooded Jumpsuit Expert.Material: TYVEK polyethylene - 100%, 41 g/m²Weight: less than 180g.Closure: zipperDesign features: 3-piece hood provides optimal fit and freedom of movement of the head. Elasticated hood, cuffs and hem, glued-in elastic waistband.Design allows for freedom of movement.Easy to grip with gloves, oversized zipper pull tab.Tyvek® material is made from high-density polyethylene fibers using fast twist technology for a superior fit. protective properties, durability and convenience. Tyvek® is a breathable material that is permeable to air and water vapor, but repels splashes of aqueous solutions and aerosols. A high degree of barrier protection against fine particles, viral and bacterial agents, fibers up to 1 micron in size, and at the same time extremely low linting of the material itself. Antistatic treatment. Silicone-free. Applications: medical, pharmaceutical, chemical, oil and gas, equipment repair, paint spraying, general cleaning and many others. Complies with TR CU 019/2011Color: white Size range: S, M, L, XL, XXL, XXXL

Drip catcher Floor filter G65 – 75mm thickness Width 750 – 1000mm. Roll length - 20000 mm. Glass fiber filter impregnated with sticky liquid for binding dry dust. Pre-filter G3(EU3), G4(EU4) Width 2000 mm, roll length - 30000 mm To protect the ceiling filter type NF 600 or NF 300 in order to increase the service life Corrugated cardboard filter Height 750 - 900 - 1000 mm. (in a package of 10 sq.m.) It is used for high loads on paint particles. Capacity up to 18 kg of paint per 1 sq.m. EXP paper filter Width 1000 mm, roll length - 12000 mm Unique multi-layer paper filter (used in the USA) NF600 "ceiling filter" Possible dimensions in width 1200 - 1430 - 1650 - 2000 - 2100 mm. Roll length - 20000 mm. Three-layer, with two cascades of different density and a support grid. Impregnated with sticky liquid for better binding of dry dust. Z65 fiberglass 65 mm thick Possible widths: 650–750–1000–1500 -2000 mm. Roll length - 20000 mm. Floor filter for trapping paint residues. Z65 fiberglass 100mm thick, width 1000mm. Roll length - 20000 mm. The same, but with a higher dust capacity.

Filter class - F5, F6, F7, F8, F9EN 779:2002, GOST R EN 779-2007 Filter material does not contain substances hazardous to the environment (Okotex-100 Class I) Disposal - similarly with construction waste Material fire safety class - FI no DIN53438 (flammable) Effective in severe aerodynamic conditions; has a compact design and high cleaning efficiency; has high performance; environmentally safe. The filter material is a pleated filter paper made from ultra-fine glass fibers. The material does not absorb moisture and dries quickly, restoring its original properties in full. Average cleaning efficiency (class F9) > 95.0%, for particles up to 0.2 microns - 99.97%. Application: - for cleaning dust from outdoor and recirculation air in supply ventilation systems; - as filters of the second stage of purification in multistage filtration systems; - in ventilation systems of the pharmaceutical and food industries, in foundries and nuclear industries, in gas turbine and compressor installations, as final air purification in hospitals and mushroom farms. Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Designed for air purification in supply and exhaust ventilation and air conditioning systems, and due to the presence of a non-woven filter material, they have a developed dust absorption surface. The presence of a support grid on the air outlet side guarantees performance under heavy loads. They are installed in places with a lack of working volume for placement and a large dust load. Filter designation scheme — FVS-G4-W x H x Lr, where: FVS — pleated air filter; G4 - filter class; W is the filter width; H-height of the filter; Lr is the frame width. When ordering, please inform: - Filter class - The width of the filter along the frame (across the corrugations, W), corresponds to the space of the niche, i.e. the length of the guides - The height of the filter along the frame (along the corrugations, H), corresponds to the size between the installation guides - The width of the frame (determines the seat in the guides, Lr) Let's make it according to individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Are intended for rough cleaning of the air given in systems of ventilation and air conditioning. The filter material is protected on both sides by a metal or plastic mesh. It is installed, as a rule, in places where large fractions (stones) can hit the filter, as well as when there is not enough space for the filter. Filter designation scheme — FVP-G4-W x H x Lr, where: FVP — panel air filter; G4 - filter class; W is the filter width; H is the height of the filter; Lr is the frame width. When ordering, please inform: — Filter class — Filter frame width (corresponds to the niche space, i.e. the length of the guides, W) — Filter frame height (corresponds to the distance between the installation guides, H) — Frame width (corresponds to the seat in the guides, L2) Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

Designed for cleaning dust from outdoor and recirculating air in supply ventilation and air conditioning systems, as well as in air preparation systems for paintwork. Filters of the following classes are produced: G3(EU3), G4(EU4), M5(EU5), M6(EU6), F7(EU7), F8(EU8), F9(EU9). The dimensions are determined by the design of the installation into which the filters are built. Filter designation scheme — FVK-G4-W x H x Lr-L-N, where: FVK-air pocket filter; G4 - filter class; W is the filter width; H is the height of the filter; Lr - frame width; L is the depth of the pockets; N is the number of pockets. The frame of the pocket filter can be made of galvanized steel or wood. Let's make according to the individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

High-performance HEPA air filters are designed for final air purification in rooms with high requirements for air purity. The air filters are made using high quality structured filter material made of ultra-fine glass fibers packed in small pleats (mini-pleats) separated by separators. High quality filter materials. Let's make according to individual sizes. Favorable prices from the manufacturer. We organize delivery in the CIS.

BOXES FOR COLLECTION, STORAGE AND SAFE DISPOSAL OF MEDICAL WASTE (MCW) CLASS B, C (YELLOW, RED) Purpose: Collection, marking, sealing and temporary storage of epidemiological hazardous medical waste in the places of their generation. Specifications: Containers are made of three-layer corrugated cardboard (biodegradable material), marking and color characteristics correspond to the hazard class. CBUs are made of dense, puncture-resistant and waterproof material, with a locking valve, which excludes the possibility of spilling or falling out of medical waste.

EM format, ABS plastic housing. The body shape is round. Operating temperature range From -20°C to +50°C, Operating frequency 125 kHz. Data type : 64 bit serial number.

The WM5000P4D device is equipped with a GPS receiver for tracking the location of the device and using GPS tags, has the function of voice calls to 5 numbers, helps the employee with voice alerts during work, and also has a SIM card slot for online control of bypasses by reading passive RFID and GPS tags from by transferring data to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, and data can also be transferred using a magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. On the side of the case there is an SOS button and a phone call control button. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, as well as vibration and a voice notification. When the battery is low, the display and red indicator show this information, a voice alert is played, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and the program's default settings include a parameter to clear the memory after data is transferred to the program. The battery charge lasts an average of 2 days when reading tags 500 times a day using GPS sending every minute. The device is fully charged in 2 hours. The main advantage of the device is the ability to track GPS location and GPS tags, make voice calls and transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Set: reader, cable, power adapter, cover. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (19 hours when sending data every 15 sec.) Water and dust protection IP 67 Application temperature -50℃~+85℃ Tag reading RFID tags 125KHz, reading distance 3-5 cm Communication 4G/GPRS/GSM/GPS, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display, LED indicator and voice alert.

The WM5000L4 device is a standard model with a SIM card for online control of bypasses by reading passive RFID tags with data transfer to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, the data can also be transferred using magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. There is an SOS button on the side of the case. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, and vibration occurs. When the battery is low, the display and red indicator show this information, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and in the default program settings there is a parameter for clearing the memory after transferring data to the program. The battery lasts for 4 days when reading tags 500 times a day. The device is fully charged in 2 hours. The main advantage of the device is the ability to transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (4 days) Protection against water and dust IP 67 Application temperature -50℃~+85℃ Reading tags RFID tags 125KHz, reading distance 3 -5cm 4G/GPRS/GSM communication, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display and LED indicator.

We supply flocculants of the following brands: anionic flocculants - GREENLIFE A, cationic flocculants - GREENLIFE K, non-ionic flocculants - GREENLIFE N. This flocculant is used for treatment of recycled and waste water; sludge dewatering in public utilities; drinking water purification; in the oil and gas industry for enhanced oil recovery, for the preparation of water-based drilling fluids; in the mining industry for the enrichment of raw materials at any stage and for the dehydration of flotation concentrates, dehydration of tailings; in agriculture to increase the viscosity of water and create more porous soil; in the pulp and paper industry, anionic flocculants are used to maintain the high quality of paper produced while reducing the quality of raw materials; in construction for waterproofing and filling cracks, as well as adhesives in various construction and repair work.