Contact Fast Freezer - 10909

DuPont™ Tyvek® 500 Hooded Jumpsuit Expert.Material: TYVEK polyethylene - 100%, 41 g/m²Weight: less than 180g.Closure: zipperDesign features: 3-piece hood provides optimal fit and freedom of movement of the head. Elasticated hood, cuffs and hem, glued-in elastic waistband.Design allows for freedom of movement.Easy to grip with gloves, oversized zipper pull tab.Tyvek® material is made from high-density polyethylene fibers using fast twist technology for a superior fit. protective properties, durability and convenience. Tyvek® is a breathable material that is permeable to air and water vapor, but repels splashes of aqueous solutions and aerosols. A high degree of barrier protection against fine particles, viral and bacterial agents, fibers up to 1 micron in size, and at the same time extremely low linting of the material itself. Antistatic treatment. Silicone-free. Applications: medical, pharmaceutical, chemical, oil and gas, equipment repair, paint spraying, general cleaning and many others. Complies with TR CU 019/2011Color: white Size range: S, M, L, XL, XXL, XXXL

Охлаждаемый салат бар встраиваемого типа. Предназначен для демонстрации и поддержания сведести ингредиентов в кафе и ресторанах фастфуд, в пиццериях и линиях раздачи. Встраивается в любую столешницу. Вместимость 6 гастроёмкостей GN1/3. Поддерживаемая температура от +2°С до +5°С. Размеры (ДхШхВ) - 112х38х16см. Высота компрессорного блока 20см. Вес не более 15кг. Фреон r600a. Статическое охлаждение. Питание 220В, 50Гц. Потребляемая мощность не более 0.075кВт/ч. Отлично охлаждает, красиво смотрится.

Refrigeration equipment Refrigeration equipment of our own production is offered for delivery.   1. The compressor and condenser unit (KKB) is a refrigeration equipment installed outside the building designed to release heat into the environment. KKB is not a self-sufficient unit, it works in conjunction with a freon air cooler, which is provided as part of the central air conditioner.   cooling capacity, kW: from 7 to 246; Refrigerant: R410A; max. operating current, A: from 5.6 to 38. 2. Condenser air-cooled chiller are compact monoblocks of the air conditioning system that do not require assembly on site, which are divided into: external with built-in condenser, internal with external condenser (spiral), screw (single-screw, twin-screw), with remote hydraulic module, with built-in hydraulic module.   cooling capacity, kW: from 120 to 1195; Refrigerant: R410A, R404A; Coolant: water, ethylene glycol; max. operating current, A: from 119 to 1161. 3. A condenser water-cooled chiller is an energy-efficient refrigeration machine for indoor installation, paired with a dry cooling tower (drycooler).   cooling capacity, kW: from 7 to 2460; Refrigerant: R410, R134A; Coolant: water; coolant: ethylene glycol 40%; max. operating current, A: from 894 to 4480. 4. A chiller with an external condenser is a refrigerating machine for internal installation, paired with an external condenser.   cooling capacity, kW: from 6 to 700; Refrigerant: R410, R134A; Coolant: water; Coolant: freon; max. operating current, A: from 6 to 640.5. An air condenser is a type of heat exchange equipment that is designed to remove heat to the environment. Remote capacitors are installed mainly outside the building. They are used in conjunction with chillers with remote condensers and precision air conditioners with an external condenser.   They are divided into:   Vertical/horizontal capacity, kW: from 3.7 to 1320; air consumption, m3/hour: from 5500 to 64000; refrigerant: R410, R134A. V-shaped capacity, kW: from 122 to 2448; air consumption, m3/h: from 34000 to 585600; Refrigerant: R410A, R134A 6. A dry cooling tower (drycooler) is a liquid cooling device used both in modern air conditioning systems and independently to provide cooling in various industries.   They are divided into:   V-shaped capacity, kW: from 282 to 2333; air consumption, m3/h: from 34000 to 585600; coolant: water, propylene glycol, ethylene glycol. Horizontal/vertical capacity, kW: from 282 to 2333; air consumption, m3/h: from 34000 to 585600; coolant: water, propylene glycol, ethylene glycol. 7. Precision air conditioning is equipment designed to accurately maintain the parameters of the microclimate in server rooms, computer rooms, industrial premises, telephone exchange, laboratories, storages. It is divided into air conditioners:   with a water-cooled condenser, designed to work together with water coolers, open or closed cooling towers; without a capacitor, designed to work together with external capacitors; on chilled water, designed to work together with chillers. The equipment is manufactured according to the Technical specifications (Checklist) A Customer for a specific Project (Object). Warranty obligations apply to all manufactured equipment. The cost, quantity and terms of manufacture (delivery) are negotiated additionally at the conclusion of the contract. Production is in the Russian Federation.  

LG 25.5 Cu. Ft. French Door Counter-depth Smart RefrigeratorBrand New

PrintShield™ finish Resists smudges and fingerprints. The specialized coating for stainless steel is easy to clean with just water and a soft cloth, so you can spend more time cooking and less time cleaning up. Counter-depth design Allows this freestanding refrigerator to fit nearly flush with surrounding cabinetry to offer a built-in look and more room to move in your kitchen. Preserva® food care system Two independent cooling systems provide a dedicated refrigeration unit to help keep food fresh longer and a separate system for frozen food. The FreshFlow™ air filter minimizes odors while the produce preserver helps delay over-ripening. (Based on commonly purchased produce.) In-Door-Ice® system Adds interior room in the refrigerator with an ice bin that mounts on the inside left door to allow for extra space on the shelves. LED lighting Uses less energy than incandescent bulbs. Multiple lights are purposefully placed throughout the refrigerator and freezer, making it easy to find items at a glance. Measured water fill Displays and automatically dispenses water in ounces, cups, or liters. You can choose from three programmed settings to pour a measured amount. Plus, two custom presets can be programmed for items you frequently fill, like a coffee pot or water bottle. Clear door bins with metallic accents Allow you to see labels right through the bins, giving you visibility and easy access to your condiments and other items. Each bin is removable, making it perfect for carrying items to the counter. Exterior ice and water dispenser Designed to support food preparation.

Samsung 23 Cu. Ft. Bespoke Counter Depth 4-door French DoorBrand New

Samsung - Bespoke 29 Cu. Ft 4-door French Door RefrigeratoBrand New

The flow meter OGM-R-25/40 series flow meters with mechanical totalizers are designed for accurate measurement of high viscosity diesel, kerosene, motor oil and other viscous liquids. The use of oval gears in meter readers ensures high measurement accuracy over a wide range of pumped product viscosities. The meter body of this flowmeter is made of aluminum and the oval rotor is made of steel. There is an analog counter and a 7-digit display on the mechanical recorder. Oval gear meter OGM-R-25/40 can be used both in stationary technical installations and in mobile vehicles for filling and pumping oil products. Liquid flow meters with oval gears are designed to measure total and one-off quantities of light oil products, liquefied gas, and other non-corrosive liquids. The flow meter OGM-R-25 level gauge can be used both in stationary technical installations and in mobile vehicles for filling and pumping petroleum products. The design of the oval gear flow meter OGM-25/40 includes oval gears, which ensures reliability and high measurement accuracy. Counter with mechanical readout (SU) Working principle of Flow Meter OGM-25/40 The counter with oval gear OGM-R-25 works on the principle that two oval gears rotate and mesh under the action of fluid flow, and each rotation measures a certain volume of fluid. The rotation of the gears is transmitted to the counting mechanism, where it is converted into units of volume. In a word, OGM series oval gear flowmeters are used to transmit liquids with a large viscosity range, and have good repeatability and service life, and can be widely used in petroleum, chemical, pharmaceutical, transportation, food and other industries. Advantages of Oval Gear Flow Meter ◈Compact structure◈Easy maintenance◈Easy to read and operate mechanical display◈Flexible installation◈Low pressure drop Technical Parameters Model OGM-25 OGM-40 Size 25mm/1” 40mm/1(1/2)” Flow Rate Range 20~120L/min 40~400L/min Accuracy ±0.5% Repeatability ≤0.17% Max. Pressure 16Bar 6Bar Dimension 30*26*36cm 36*33*30cm Net weight 7.5kg 19.5kg Gross Weight 8kg 20.5kg Package 1pc/carton 1pc/wooden case

MSeries flow meter is a kind of positive displacement flowmeter, belong to the class with the highest accuracy in the . in the production of petroleum industry and , from oil extraction, transportation, smelting and processing to trade sales, flow measurement runs through the whole process. No link is inseparable from flow measurement, otherwise the normal production and trade exchanges in the petroleum industry will not be guaranteed. Features of M series Flow Meter Excellent stepless trimming device (wear compensation device) for positive and negative calibration of the flowmeter. High accuracy and repeatability over a large range; ultra-high accuracy at constant flow. Low maintenance, low wear, long life Low pressure loss, true gravimeter Measurement accuracy is not affected by changes in temperature, pressure and viscosity Available in aluminium, cast iron, cast steel and stainless steel Applications of M series Flow Meter this kind of flow meter can be applied into various fields, such as refined petroleum products, unleaded gasoline, leaded gasoline, diesel oil, kerosene, fuel oil, propylene; motor oil, liquefied petroleum gas, crude oil, etc.

This kind of fuel nozzles have small shape, light weight, easy to operate and convenient to use. Designed on customers’ demands, Jayo nozzles for fueling dispenser can provide durable long life and reliable service. Materials of Fuel nozzles JY2101-11A Body: Aluminum Seals: Buna-N, Won Main stem seals: Viton Cased Oil Seal / Graphite with Teflon Main stem: Stainless steel Features of Fueling Nozzles ♦ JY2101-11A automatic fueling nozzles are suitable for refilling diesel, kerosene and various gasoline. ♦ It is easy to replace the oil outlet pipe – just need to remove the screw on the oil outlet pipe and replace the new oil outlet pipe, related accessories can be obtained from Jayo Petro. ♦ Adopting small aluminum frame, this fuel nozzle shows light weight, easy to operate, unique and novel in appearance. ♦ This series fuel nozzles adopt the advanced vacuum design. ♦ The body uses casting process – sand casting process or high pressure casting proces, which reduces foam and static electricity generation. ♦ Users can control the fueling gun with one hand, convenient and quick to set the flow rate for the customer. ♦ This fueling nozzles adopt the integral insulated holster to protect the refueling gun and vehicle, and isolate the user’s hands from damage. ♦ Color selections •See color chart on inner page. ♦ Optional splash guard. ♦ Optional oil outlet pipe with attitude lock – when the oil outlet pipe is tilted upwards more than the horizontal position, the oil gun will be automatically closed to prevent leakage and accidents. ♦ 100% factory inspection. Warning: Using other objects to keep the automatic fueling nozzles in the normally open state will cause the fuel gun to fail to close and personal injury.

WASTE MINERAL OIL AND PETROLEUM PRODUCTS PROCESSING SYSTEMS Waste mineral oil recycling plant distillation refinery manufacturing assembly, The net work of waste oil recycling machines is made from 50 liters to 100,000 liters. The oil produced by the machine can be used as generator fuel without adding any additives. Crude oil processing distillation systems, Fuel oil processing and Bitumen asphalt oxidation systems and Various processing units of petroleum products. Additional information H.K Makine carries out turnkey projects in the country and abroad on waste oil recovery systems (waste oil, mineral oil, bilge oil, machine oil, etc.) of petroleum derivative products. Waste oil recovery facility is a company that tries to keep customer satisfaction at the highest level with its expert staff in installation, piping, electronic installation, automation, design and personnel training. The biggest advantage of H.K Makine in the operation of the waste oil recovery facility is that it does not leave its customers alone in the operation of the system, regardless of whether it is domestic or abroad. Waste Oil Regeneration Process and Machine Operation ●Basically, these types of oils (engine oil, hydraulic oil, gear oil, cutting oil, mixed petroleum oils) are used in waste oil recovery facilities. ● It is the conversion of waste oils into base oils and diesel under high temperature pyrolysis conditions in order to reuse waste oils. ● Waste oils are distilled at high temperatures and hydrocarbon molecules are broken down and a new oil is formed by aligning with a new combination. ● During the distillation process of waste oils, waste oil turns into gas and then turns into oil through the cooling process and is separated according to their density according to the demand and the final product is obtained. ● In the process of improving oxidation, bad odor and color in the refined oil, it removes the residual asphalt, moisture, acid, carbon oxidation in the oil. Obtained Products; ● Diesel ● Thin Base Oil ● Thick Base Oil ● Fuel Oil Waste Oils It is recycled in 2 main ways as Refining and Regeneration and separated according to 3 main categories. refining The process of converting waste oils into base oil or petroleum products in accordance with national or international standards and specifications by refining. Regeneration The process of obtaining original oil in accordance with international standards, specifications and intended use by removing all kinds of pollutants, oxidation products and particles from waste oils.

HK MAKINE carries out turnkey projects in the country and abroad for the establishment of waste oil recycling facility. In Europe, Arab countries and African countries, the installation, assembly, design, electrical installation, piping work, personnel training, automation, insulation, performance tests and commissioning of the waste oil recycling facility at the desired capacity are carried out on a turnkey basis. Waste oils, which are among the hazardous wastes, have been an important part of the management plans of the countries. The Waste Oil Treatment Machine has an important role in minimizing the negative effects of waste oils that harm the environment and human health, and in using these hazardous waste oils with the best possible technologies to benefit the country's economy. Countries need to work in harmony with mineral oil facilities, recovery and disposal organizations, waste oil carriers, laws and regulations, which form the basis of waste oil management. In the management of waste motor oil recovery facilities, in addition to protecting the environment and human health at every stage, sensitivity on safety issues in all services should be kept at the highest level and should be continuously improved. Waste oil and used oil recycling plants are specially designed to convert used oil into quality base oil. Waste oil plants are an economical waste oil re-refining method that is not only an investment but also an environmental benefit. We have incorporated it into the front-end and back-end systems of waste oil recycling plants to perfect the combination of various primary separation and after-treatment steps. It ensures proper dehydration and pretreatment of the used oil so that it can be distilled in high vacuum to prevent cracking in the non-cracking evaporation unit. Working Principle of Waste Oil Recycling Plant Waste oils are converted into base oils and diesel by high-temperature separation method in order to reuse waste oils. By applying high temperature distillation to waste oils, their molecules are broken down and a new oil is formed. During distillation, the waste liquid oil turns into gas, and then it is cooled and separated according to their density in liquid form to obtain the final product. Obtained products; • Diesel • Thin base oil • Thick base oil • Fuel oil Mineral waste oils can be recycled by 2 different methods. These methods are as follows. Refining The process of refining waste mineral oils and converting them into base oil or petroleum products in accordance with national or international standards is called refining. Regeneration The process of obtaining original oil in accordance with international standards and specifications by removing the contaminants and foreign particles found in waste mineral oils is called regeneration. Our company offers turnkey solutions in the establishment of waste oil recycling plant, mineral waste oil recovery plant, waste motor oil recycling machine, mobile waste oil recycling machine, waste oil recovery plant, waste oil treatment machine and factory installation.