ООО ПрактикМ

Not approved icon Not verified supplier
Make a safe deal with this supplier. Apply
USD 4828.4/pcs 4828.4
TECHNICAL CHARACTERISTICS AND DESCRIPTION OF THE EQUIPMENT Automatic labeling line EM-5 is designed for sticking self-adhesive labels (1, 2 pieces or circular) on glass and PET containers, both cylindrical and square. DESCRIPTION AND OPERATING PRINCIPLE EM-5 can be used at chemical, food, pharmaceutical enterprises, meets all the necessary GMP requirements. Our own developments are used in the design and manufacture of equipment. The separation of the labels from the carrier (backing) occurs due to bending of the siliconized paper backing around the installation knife. The substrate is pulled by a drive roller with a silicone sheath connected to the applicator stepper drive shaft. The used substrate is reeled up by the pick-up axle. The liner is secured to it by means of an engaging device that provides fast roll loading and quick release of used liner. The drive is controlled by two sensors: a container sensor and a label sensor. The tare sensor starts the applicator drive when the tare enters its area of ​​action, swiping the label roll backing through the applicator. For proper operation of the applicator, the gap between the labels on the liner should be between 2 and 50 mm. Typically, it is 2 to 5 mm. The wrapper is designed for even distribution (smoothing) of labels when labeling bottles. ADVANTAGES Automated production work. Possibility to apply labels to different sides of the product. Wide range of conveyors (length and type of coverage). UNIVERSALITY It can be used in any industry. Can be used for different types of container sizes. It is possible to install any applicator and replace it if the conditions of the customer's technical specifications change. SPECIFICATIONS Parameters Meaning Maximum performance, pcs / hour up to 4000 Type of applied bottles glass / PET / PET (others are possible) Label length, mm from 20 (maximum is not limited) Label width, mm from 10 Deviation from parallelism labeling, ± 0.5 mm Film roll diameter, mm 250 Label feed speed, m / min. 40 Fixed label dispenser Power consumption, kW 0.5 Machine dimensions (L * W * H), mm 1200 * 1200 * 1500 Service staff, people 1 terms of Use operating temperature range, ° С from + 10 to +35 relative humidity,% no more than 80 at 25 ° С atmospheric pressure, kPa from 84 to 106.7
USD 497.04/pcs 497.04
Self-adhesive label applicator Lm (labeler, labeling machine, labeling machine, labeling machine) for cylindrical containers, manual. Robust steel construction. Universal device for applying self-adhesive labels.
USD 51124.26/pcs 51124.26
Rotary labeling machine 10 local - designed for applying polypropylene circumferential OPP labels from a roll to cylindrical PET bottles. The capacity of the machine for a 1.5L bottle is 8,000 bph. SPECIFICATIONS Automatic speed control: Standard speed mode; Operator adjustable speed mode. Manual bottle height adjustment (there is a possibility of making an automatic bottle height adjustment). Application of glue to bottle and label using a spray system. automatic hot glue dispensing station - HOT MELT from NORDSON Glue supply: Hot glue supply through nozzles using a spray system. Adjusting the temperature of the glue in the barrel and in the spray. Hot glue consumption 1kg / 20-35 thousand labels. System for applying a label to the cylindrical part of the bottle: bottle diameter: 50 - 120mm polypropylene label (35 - 50 microns), circumferential for hot glue. length 70 - 380mm height 50-150mm max roller diameter 600mm productivity for a bottle of 1.5 liters 10000 bph. label feeding on vacuum drum air consumption 35 l / min. (6 bar). frame made of stainless steel KO / Inox. Application of glue to bottle and label using a spray system. automatic hot glue dispensing station - HOT MELT from NORDSON 2 m conveyor belt made of plastic or stainless steel. Electronic controls: Machine speed controller Drive - 2.6kW power with inverter. Touch control panel Machine speed indicator. Product counter Electric cabinet integrated with the machine. Pneumatic system of METAL WORK company. EATON electrical equipment The machine is supplied with equipment for one packaging format. The introduction of bottles from the left or right side is made by agreement.
USD 9940.83/pcs 9940.83
Productivity up to 3000 etiquette / hour Installation cost depends on the configuration: Installation for applying polypropylene labels to PET containers. Savings on the label 3 times! Purpose of the product The labeling machine is designed to apply a ring, polypropylene label to a cylindrical gas-filled PET bottle. There is a visualization and control tool - a Weintek operator's touch panel. This solution makes it possible to visualize the technological process of labeling on the panel screen, provides quick access to the settings of the unit's operation parameters, and visualizes emergencies that have arisen in its operation. The extensive graphical capabilities of the operator panel make it possible to provide help sections for each parameter or alarm for maintenance personnel. The panel software provides for the possibility of combining several units into a SCADA system for centralized control of technological processes. The operation of the installation is controlled by a programmable logic controller (PLC) of its own design by the specialists of PraktikM. The PLC is based on a high-performance RISC microcontroller from ATMEL. The choice of a PLC solution in the form of its own design is due to the ability to provide it with the functions that are used in a particular installation. The existing solutions offered on the market are usually overloaded with unnecessary functionality, while they do not have the functions that are required for a specific control system. Then, to build the system, expansion modules are used, which overly complicate the design.
USD 13917.16/pcs 13917.16
The EM-62 labeling machine is designed for applying a ring, polypropylene label to a gas-filled cylindrical PET bottle. For visualization and control of the process, there is an operator touch panel from KINCO. Productivity up to 6000 labels / hour The broad graphic capabilities of the operator panel allow: to present the technological process of labeling clearly on the panel screen, to provide quick access to the settings of the unit's operation parameters, to visualize emergencies that have occurred during its operation. find answers to questions in the help sections for each parameter or alarm for maintenance personnel. The operation of the installation is controlled by a programmable logic controller (PLC) of its own design by the specialists of PraktikM. Based on the wishes of customers, the necessary technical requirements for this equipment and the innovative solutions of our engineers and technicians, it was possible to ensure the following features of the operation of the installation: a sign-synthesizing indicator - all settings, parameters, indication of emergency situations are available without the operator panel! Parameter entry is offered in the form of a tree-like menu using its own eight-key keyboard. Automatic control of the temperature of the glue bath with notification of an accident when it (temperature) goes beyond unacceptable limits. Detection of a malfunction of the temperature sensor (thermocouple) of the glue bath with an alarm indication on the screen of the operator panel and PLC. Automatic switching on of its own drive of the glue bath when the set temperature is reached. This excludes the possibility of turning it on in an unheated state in order to avoid damage to the mechanisms of the glue bath. Protection of the temperature control system of tools (glue and cutting knives) from a short circuit or failure of their heating elements with an alarm indication on the screen of the operator panel and PLC. Protection against short circuit of the power supply channels of the pneumatic valve coils with alarm indication on the screen of the operator panel and PLC. Tracking the state of the transport conveyor (general shop or own). When the conveyor is turned off, the system works out this situation in order to avoid sticking a label on an unsuitable bottle with an alarm indication on the screen of the operator panel and PLC. Tracking the end or break of a roll of labels. Memorizing presets for reapplying. Maintainability of PLC due to the use of a widespread element base. Calculation and indication of the performance of the installation in real time, depending on the length of the labels and the settings of the frequency converter of the drive of the installation. Alarm indication of the frequency converter of the unit drive on the screen of the operator panel and PLC. Not only smooth acceleration, but also smooth drum braking (so as not to break the gearbox). Slow manual cueing for probe learning and tool manipulation. Sensor training (button on the panel). Additional input (or several) for the second (third) tag sensor with sensor selection on the panel. Setting frequencies, drum acceleration and deceleration time, frequency, acceleration and deceleration times in "slow" mode from the panel. Instant stop by STOP button (without deceleration). Jam sensor at the exit from the machine. Warranty 24 months.
About company
Categories: Address:
Packaging and labelling, Textile machinery, Textile machine parts, Packaging Machines, Industrial Equipments and Machines, Other equipments and machines, Special machinery & parts Russia, Московская область, п. Малаховка, Егорьевское шоссе, 1

PraktikM - Manufacturer of equipment for filling food and non-food liquids, including corking, labeling and packaging equipment

Contact supplier
Supplier:
"Узлегпром"
Write to us, we are online!