PT. Machineprint

Printing Method Maximum Resolution 2880 x 1440 dpi1440 x 1440 dpi1440 x 720 dpi720 x 720 dpi720 x 360 dpiDraft: 360 dpi Printing Technology Advanced MicroPiezo TFP print head with ink repelling coating technology10-channel, drop-on-demand, ink jet print head Minimum Ink Droplet Size 3.5 pl Ink Type Epson UltraChrome HDR inkProfessional-level pigment-based ink Ink Palette O, G, C, LC, VM, VLM, Y, LK, LLK, PK or MK Ink Cartridge Configuration 11 individual cartridges Compatible Ink Cartridges Included: 80 ml Starter ink cartridges200 ml replacement cartridges:Photo Black (T653100), Cyan (T653200), Vivid Magenta (T653300), Yellow (T653400), Light Cyan (T653500), Vivid Light Magenta(T653600), Light Black (T653700), Light Light Black (T653800), Matte Black (T653900), Orange (T653A00), Green (T653B00) Shelf Life Ink: 2 years from production date or 6 months after opening Number of Nozzles Color and monochrome: 10 x 360 nozzles Line Accuracy ±0.2% of specified page length Print Archival Life With Epson UltraChrome HDR Ink:Color: Up to 200 years B&W: Over 200 yearsActual print stability will vary according to media, printed image, display conditions, light intensity, humidity and atmospheric conditions Performance Print Speed 8 x 10″ (216 x 254mm): from 0:59-4:15 – Normal is 1:28 11″x 14″ (279 x 356mm): from 1:42-7:00 – Normal is 2:31 16″x 20″ (406 x 507mm): from 2:46-11:40 – Normal is 4:11 Printer Duty Cycle Not Specified by Manufacturer Paper Handling Paper Sizes Single sheets: 8.0 x 10.0″ (216 x 254mm)-17.0 x 24.0″ (432 x 610mm) Maximum Paper Width 17″ (432mm) Maximum Printable Area Left and right margins 0-3mm each (0.24″ total) Maximum printable width 17.23″ (438mm) – full bleed 17″ width Maximum printable length limited by application, OS, and driver/RIP used Borderless Photo Sizes Complete borderless printing on the following roll media sizes:8.0″ (216mm), 10.0″ (254mm), 11.0″ (279mm), 13.0″ (330mm), 14.0″ (356mm), 16″ (406mm), 16.5″ (419mm), 17″ (432mm)Top and bottom edges can be automatically cut to any length when printing on roll media Paper Types Epson Photographic, Fine Art, Proofing, Signage, Coated Matte, Coated Gloss papersThird party papers up to 1.5mm thickness Paper Capacity 20-100 sheets Media Weight 12 lb (46 gsm) bond – up to 1.5 mm posterboard Core Size 2″(51mm) and 3.0″ (76mm) Maximum Media Roll Diameter 4.0″ (102mm) or 6.0″ (152mm) Maximum Roll Print Length Up to 132′ (40.2 m) – limited by core diameter Paper-Feed Method Roll feedAuto loading cassette: 0.08-0.27mm thick media, 20-100 sheet capacity based on media type and thickness Cutter Built-in rotary cutterAutomatic and manual single pass cut on up to 17″ (432mm) wide roll media Connectivity Interfaces 1 x hi-speed USB 2.0 (1.1 compatible)1 x Ethernet port – 10/100Base-T Compatible Memory Cards N/A Direct Print Capable N/A Network Capable Yes, wired Ethernet 10/100Base-T PostScript Support Epson ESC/P 2 raster photographic drivers standardOptional PANTONE licensed and SWOP certified Adobe PostScript RIP by EFI (EFI eXpress included only with Designer Edition bundle)Supported by most leading third-party RIPs Operating Systems Supported Windows: XP, Vista, and Windows 7 (32 & 64-bit)Mac, EFI eXpress: OS X 10.5-10.8Mac, Printer Only: OS X 10.5 or later Physical Status Display High-resolution 2.5″ (62mm) color LCD Image Preview Display N/A Front Panel Controls Yes Operating Temperature Operating: 50-95°F (10-35°C)Storage: -4-104°F (-20-40°C) Operating Humidity Relative: 20-80% Operating: 40-50% RH Acoustic Noise Approximately 45 dB(A) according to ISO 7779 Power Requirements 110-120VAC, 50/60 Hz, 1.0A Power Consumption Operating: approx. 52W or lessStandby: <8.5WPower off: <0.5W Safety Compliance Safety standards:UL 60950-1, CSA C22.2 No.60950-1, Low Voltage Directive 2006/95/EC – EN60950-1 EMC:FCC Part 15 subpart B class B, CAN/CSA-CEI/IEC CISPR 22 Class B, AS/NZS CISPR Class B, EMC Directive 2004/108/EC – EN 55022 Class B, EN 55024, EN61000-3-2, EN61000-3-3 Dimensions (WxHxD) 34.0 x 16.0 x 30.0″ (864 x 406 x 762mm) Weight 115 lb (52.2 kg) Packaging Info Package Weight 144.2 lb Box Dimensions (LxWxH) 40.0 x 36.0 x 23.0″

Printing Method Printing Technology 9-channel, drop-on-demand Advanced MicroPiezo TFP print head with ink repelling coating technology and Auto Head Alignment and Cleaning technology Maximum Resolution 2880 x 1440 dpi Minimum Ink Droplet Size 3.5 picoliters with Variable Droplet Technology Ink Type Epson UltraChrome K3 with Vivid Magenta pigment-based ink Ink Palette C, LC, VM, VLM, Y, LK, LLK, PK/MK Ink Cartridge Configuration Uses 9 individual ink cartridges Performance Print Speed 16″ x 20″ print: 0:50 to 7:3920″x 30″ print: 1:24 to 13:2440″x 60″ print: 4:08 to 42:10time listed in Min:Sec Input Buffer Not Specified by Manufacturer Printer Duty Cycle Not Specified by ManufacturerCutter life: 2,000 cuts (coated media) Print Archival Life Up to 200 Years (depending on print media) Maximum Paper Width 64″ Maximum Printable Area 63.75″ wide with length limited by application, OS, and Driver/RIP used Paper Sizes Roll Media with width of 10″, 13″, 16″, 17″, 24″, 36″, 44″, 50″, 54″, 60″ & 64″Cut Sheet from 8.5″ x 11″ (letter) to 64″ wide (any length) Borderless Photo Sizes Borderless printing with roll media sizes of 10″, 13″, 16″, 17″, 24″, 36″, 44″, 50″ & 54″Top and bottom edges can be automatically cut to any length Paper Types Inkjet media approved for use with pigment based inks Maximum Paper Thickness 12.5 mil (roll, tray and top feed slot)1.5 mm posterboard (rear manual feed slot) Paper Capacity Cut SheetsFront feed slots: 1 SheetRoll MediaLimited by total roll diameter of 4″ with 2″ core or 6″ with 3″ core) Special Media Support Works with non-paper based inkjet media Connectivity Computer Interface USB 2.0 (Hi-Speed) 1.1 compatibleEthernet (10/100/1000 Base-T) RJ-45 connector Compatible Memory Cards None Direct Print Capable No Network Capable Yes (via Ethernet) PostScript Support Optional PANTONE licensed and SWOP certified PostScript Language Level 3 Compatible RIP by ColorBurstSupported by most leading third-party RIPs and workflows System & Software Requirements Windows System   Pentium4 3.0 GHz or better processor Windows XP, XP Pro x64, Vista, Vista x64 1GB RAM (2GB recommended) 30GB free hard drive space CD-ROM or DVD Drive (4x speed) USB Port and Shielded USB “AB” Cable (10′ max. length)orEthernet-equipped PC and Cat 6 cable Macintosh System PowerPC G5, Intel or higher processor Macintosh OS X (10.4.9 or higher, 10.5 or higher) 1GB RAM (2GB recommended) 30GB free hard drive space CD-ROM or DVD Drive (4x speed) USB 2.0 Port and Shielded USB “AB” Cable (10′ max. length)orEthernet-equipped PC and Cat. 6 cable Physical Status Display 2.5″ Monochrome Alphanumeric LCD & Indicator LEDs with Printer Activity Lighting System Image Preview Display No Front Panel Controls Power, Pause/Reset, Left arrow/Paper source, Paper feed up, Paper feed down, Enter/Bar Code, Menu/Clean, Take-up Reel Controls Power Requirements 110-120 V AC; 50-60 Hz Dimensions (WxHxD) 92 x 46 x 28″ (2337 x 1169 x 712 mm) with stand Weight 384 lb (175 kg) with stand Packaging Info Package Weight 395.2 lb

Description : Countless hours of high quality printing with the most reliable low-cost 3D printer Quickly and easily make your 1st print out of the box with completely pre-assembled printer, included 0.5 kilogram spool of filament and clear setup instructions. Maximum build depth (inches): 9 Far superior safety compared to competition with fully enclosed design, non-heated build plate, PLA-only printing and 3rd party UL safety approval Compatible with brand new Dremel Digilab 3D Slicer based on cura, the industry leading open source 3D printing software and gcode files so you can use your favorite slicer Accompanied by unparalleled local Dremel customer service support and industry’s best 1-year warranty. Extruder temperature: Up to 230°C /397°F Specifications : Brand Name Dremel Compatible Material Polylactic Acid Connectivity Technology SD Card Ean 0889894198648 , 0080596038809 , 0889894206718 Form Factor Print only Global Trade Identification Number 00080596038809 Included Components Dremel DigiLab 3D40 3D Printer, Instruction Manual, Quick Start Guide Item Volume 0 milliliters Item Weight 15.43 pounds Manufacturer Series Number 3D20-01 Model Number 3D20-01 Number of Items 1 Part Number 3D20-01 Printer Output Color Printer Technology 3D Specification Met   Style 3D Printer UNSPSC Code 43190000 UPC 889894206718 , 889894198648 , 080596038809 Product Dimensions : 18.5 x 13.39 x 13.78 inches; 15.43 Pounds Item model number : 3D20-01 Date First Available : September 3, 2014 Manufacturer : Dremel ASIN : B00NA00MWS 3D45-01 3D40-EDU 3D40-01 3D20-01 Recommended Use Advanced 3D Users in Industry, Higher Education, and High School for Engineering and Product Development Beginner K-12 Education Institutions that want help getting started with 3D printing Beginner and intermediate K-12 Education Institutions for Hands-on, Project-Based Learning Tinkerers, Hobbyists, & Home Users Build Volume 10 x 6.0 x 6.7 in 10 x 6.0 x 6.7 in 10 x 6.0 x 6.7 in 9.0 x 5.9 x 5.5 in Wifi-Enabled for Cloud Printing ✓ ✓ ✓   Filament Type(s) Used Nylon, eco-ABS, PLA PLA PLA PLA Heated Build Plate ✓       Build Plate Material Glass Glass Glass Acylic Build Plate Leveling Semi-Automated Semi-Automated Semi-Automated Manual Warranty & Support 1-Year with Infinite Customer Support 1-Year with Infinite Customer Support 1-Year with Infinite Customer Support   4 Hours of Professional Development Credit   ✓     Filament Rolls Included 1 Nylon, 1 Eco-ABS 4 PLA 1 PLA 1 PLA

Product Specification: Power/Voltage: 900W/110V Rated frequency: 50-60Hz Power cord: 4.5 ft Temperature：Max 480 ℉ (Recommend 356 ℉ ) Size of heating plate: 12″ x 15″ (Swing-away design) Package lists: 1 x Heat Press Machine; 1 X Mug Press Machine;1 X Hat Pad;1 X 11OZ Mug Pad;2 X Plate Pads（5 inch, 6 inch);1 X Lengthened aluminum bottle heating pad;1 x UL Certified Power Cord; 1 x User Manual; – 360°Swing Away Design Full 360-degree rotation of swing arm allows the heating element to be moved safely aside, reducing the chances of accidental contact. – Multiple Spring Balance Full range press directly and evenly, which guarantees the quality of finished transfers – Digital LED Display Dual integrated digital LED display with controller allows you to pre-set temperature and timer countdown

The DIGINK eMAX 3 Series Digital Inks are designed specifically for use in Roland eco-solvent printers. Conveniently packaged in 500ml fully compatible cartridges, they provide serious value and the highest performance alternative to the OEM ink set. Users of Roland Eco-Sol MAX 3® inks (ESL5) can change to DIGINK eMAX 3 Series Digital Inks without the need to convert, thanks to DIGIPRINT SUPPLIES unique Load & Print ink capabilities. They are 100% plug and print and do not require any flushing or new colour profiles. DIGINK eMAX 3 Series Digital Inks can be used together with original Roland Eco Sol Max 2® metallic and white inks. Due to the complete chemical and colour compatibility of the ink sets, OEM ESL5 cartridges can be replaced with DIGINK eMAX 3 Series Digital Inks cartridges as each of them runs out, rather than all colours together at the initial install. This saves both time and money as there is no need to perform wasteful ink fill procedures or dispose of unused previous ink. The inks exhibit excellent improved scratch resistance, superior adhesion and durability on a wide variety of typical Point of Purchase (POP) substrates such as self adhesive vinyl, banner, paper and textile media. DIGINK eMAX 3 Series also feature fast printing and improved drying times – superior to the Roland Eco-Sol Max® ink performance. FEATURES & BENEFITS Fully compatible with Roland Eco-Sol MAX 3® inks (ESL5) for easy installation Colour matched to Roland Eco-Sol MAX 3® inks for using the existing colour profiles without the need to create new profiles Can be mixed with Roland Eco Sol Max 2® metallic inks and Roland Eco-Sol MAX 2® white inks Faster drying time for accelerated production speeds Superior scratch resistance for longer outdoor durability & no need to laminate the prints Excellent adhesion and flexibility on most digital inkjet media Virtually odourless with no harmful volatile organic compounds (VOC) for using in a non ventilated environment. Nickel free GREENGUARD Certified Ink UL 2818 Durability up to three years outdoors without lamination One-year Warranty covering all printer ink parts. Roland RF-640 Roland VS-300i Roland VS-540i Roland VS-640i Roland XF-640 Roland XR-640 Color Black Cyan Magenta Yellow Light Magenta Light Cyan Set of 6