Laser modules 450nm (blue) - 13223

Specification: 1. Exhaust System: Front 2. Suction Power:85-90kg 3. Slide Hammer Weight:3.5lb 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:240L/min 7. Net Weight:2750g 8. Tool Length:1120mm 9. Packing:4pcs/14kg/16kg/1.32'   Application: It supplies a new way that save a lot of time to fix steel plate. Let the obsession with dent throw out. It's the best way to solve. As easy as pie to use. When pressure valve is bon after a few minute, however is a dent of car, an oil box of motorcycle or a steel plate of air plane, all of trouble will be solved.

Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill.   Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:540L/min 5. Net Weight:895g 6. Tool Length:240mm 7. Collet Size: 6mm (1/4") 8. Locking Cap: 5/16X24T (1/4x28T,M6x1.0,1/4x20T) 9. Packing:10pcs/10kg/11kg/0.53'

Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork , desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed.   Specification: 1. Free Speed:17000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:650L/min 5. Net Weight:1300g 6. Tool Length:1900mm 7. Exhaust System: Rear 8. Packing:10pcs/15kg/16kg/2.3'

Rubber sleeve keeps hands from getting cold or slip Don't use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent removes exhaust through a hose protector, away from operator's hands. The tool is a powerful, reliable air tool ideally suited for continuous wet polishing in stone industry, and is safer when used wet! Detachable rotor and gear design brings you an economical repair   Specification: 1. Free Speed:4500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:660L/min 5. Net Weight:1220g 6. Tool Length:235mm 7. Exhaust System: Front 8. Packing:10pcs/21kg/22kg/1.38'

Description: There is omnipotent hold fast. It's easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries   Specification: 1. Strokes Per Minute:3400 spm 2. File Shake Dia:5mm 3. Stroke Length:5mm 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:150L/min 7. Net Weight:580g 8. Tool Length:700mm 9. Packing:10pcs/8kg/9kg/1.2'

Description: Flux Chipper it's powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside.   Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:1800g 6. Tool Length:230mm 7. Packing:5pcs/11kg/11.5kg/0.4'

Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It's was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside.   Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:200L/min 5. Net Weight:2590g 6. Tool Length:385mm 7. Needle:19 pcs 8. Packing:5pcs/14kg/14.5kg/0.4'

Description: The 3” PAD supply various of sponge and wool-wheel for partial. Small volume, light weight, low noise. It’s suitable for the small area to smooth. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:2500 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:790g 6. Tool Length:160mm 7. Packing:20pcs/20kg/21kg/1.2'

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking.   Specification: 1. Free Speed:15000 rpm 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. Air Consumption:600L/min 5. Net Weight:650g 6. Tool Length:160mm 7. Packing:20pcs/18kg/19kg/1.2'

FEATURES + BENEFITS. Powered by a 166cc Honda GCV170 quick start 4-stroke engine. cutting speed. Dual MicroCut blades use 4 cutting surfaces for ultra-fine cutting and superior cut quality. Multiple cutting options with Clip Director 3-in-1 for mulching, bagging or rear ejection. Durable steel/resin 21 in. steel cutting deck 7-position height adjustment from 1 inch. up to 4" with 2-lever adjustment knob. Foldable EZ handle with 2-position 8" height adjustment. front and rear wheels ensure smooth operation. Capacity 1.9 bushels. ) 21. Engine Honda GCV170 Deck Material Steel/Resin Discharge Mulch, Bag, Rear Discharge Cutting Height (inches) 1–4 Cutting Methods Mulch, Bag, Rear Discharge. Mowing speeds. Variable speed, self-propelled Max. Cutting speed (mph) 4 Blade type. Double blade MicroCut. Package volume (bushels) 1.9 Fuel tank capacity (qt) 0.95. Front tire size (in) 8. Rear tire size (in) 8. Dimensions L x W x H (in) 61 x 22 5/8 x 40 7/8. Engine type 4-stroke.

A mini-plant for the production of ceramic bricks is capable of not only producing high-quality bricks and / or tiles, but also has the ability to manufacture products with a significantly larger assortment than a large enterprise. The standard output is about 4 million bricks per year. This is an almost ideal option for developing a niche for the production of building materials while implementing original unique design solutions, as well as for filling the market with new and effective offers. For example, the described line is capable of producing both thin light partition blocks, and "American" (narrow brick), and facing tiles, and facing bricks with a textured surface. If you are interested in purchasing a mini-factory and you want to open the production of ceramic bricks and other building elements, use the following contact details of a specialist in charge of the CIS direction. Or, use the feedback form on the site. In order for your request not to fall into the basket and for it to receive the correct and really necessary answer, in this case, a commercial offer, we strongly recommend that you do the following and indicate in the appeal: The performance you require. Sizes of manufactured products, degree of hollowness (if necessary), strength, etc. The presence of a chemical analysis of raw materials that are planned to be used for the manufacture of products. Availability of main energy carriers and available capacities (gas, water, electricity, etc.). Address of the location and installation of the line. For whom the commercial offer should be prepared: private person (full name), organization (name).

Brand New Product, PRODUCT OVERVIEW This is 20in. The Husqvarna 450 Rancher 2-stroke chainsaw is an outstanding all-round chainsaw for anyone who appreciates pro-level power and performance. X-Torq® 2.8 HP, 50.2 cc engine cm reduces fuel consumption and emissions. Meanwhile, the built-in fuel pump, Smart Start® technology and auto-return switch ensure smooth starting. 20 inches. The handlebar is equipped with an inertia-activated chain brake to reduce kickback and increase safety. The Smart Start® system with built-in fuel pump, automatic return switch and easy-to-pull start cord allows you to work quickly and with minimal effort. A simple side tension system allows for quick chain adjustments during operation. The LowVib® anti-vibration system helps reduce vibration, increasing user comfort and reducing user fatigue. 2 year limited warranty. FEATURES + BENEFITS Powerful 2.8 hp X-Torq® 2-stroke 50.2cc engine. reduces fuel consumption and gasoline emissions Rugged and manoeuvrable 20-inch. ideal for yard cleanup, firewood cutting, light felling work, etc. Smart Start® technology with built-in fuel pump, auto-reset switch and easy-to-pull starter cord ensures quick engine starts with minimal effort Inertia-activated chain brake, reduces kickback to reduce injury during operation Automatic oiler ensures constant supply of chain lubrication Simple side tension system allows quick adjustments during operation LowVib® anti-vibration system reduces vibration levels to help minimize operator fatigue Quick release air filter for easy cleaning and replacement Key Features Part Number No. 106858 Brand name Husqvarna Manufacturer's warranty 24 months parts / 24 months labor Ship weight 18.9 lbs Rod length 20 Displacement (cm3) 50.2 Power 2.8 Fuel capacity (oz) 15.22 Gas:oil Fuel ratio mixture 50:1 Chain brake Yes Regulus Powered Oil Pump Supply Primer Bulb Yes Low Vibration Handle Yes Toolless Chain Tensioning No Case Included No Dimensions L x W x H (in) 16 x 8.9 x 11.5 Product Weight 18.9