Three phase separator - 49943

DuPont™ Tyvek® 500 Hooded Jumpsuit Expert.Material: TYVEK polyethylene - 100%, 41 g/m²Weight: less than 180g.Closure: zipperDesign features: 3-piece hood provides optimal fit and freedom of movement of the head. Elasticated hood, cuffs and hem, glued-in elastic waistband.Design allows for freedom of movement.Easy to grip with gloves, oversized zipper pull tab.Tyvek® material is made from high-density polyethylene fibers using fast twist technology for a superior fit. protective properties, durability and convenience. Tyvek® is a breathable material that is permeable to air and water vapor, but repels splashes of aqueous solutions and aerosols. A high degree of barrier protection against fine particles, viral and bacterial agents, fibers up to 1 micron in size, and at the same time extremely low linting of the material itself. Antistatic treatment. Silicone-free. Applications: medical, pharmaceutical, chemical, oil and gas, equipment repair, paint spraying, general cleaning and many others. Complies with TR CU 019/2011Color: white Size range: S, M, L, XL, XXL, XXXL

Water treatment, which allows you to effectively influence a large number of different pollutants of artificial and natural origin with simultaneous disinfection of water. The possibilities of the method are quite large, having a number of positive properties. AREAS OF APPLICATION: Drinking water - disinfection, removal of iron, manganese, sulfides, nitrites, COD, pesticides and other contaminants, removal of odor and unpleasant taste; Bottled water, drinks - water treatment, bottle washing, shelf life extension; Process water - disinfection, odor removal, decolorization, COD reduction, contaminant reduction, water recycling, in-place treatment processes; Wastewater - disinfection, reduction of color and turbidity, odor removal, reduction of COD and content of adsorbed organic halogen derivatives, removal of pollutants such as phenols, pesticides, detergents, polycyclic aromatic hydrocarbons, chlorinated hydrocarbons incl. PCDD/F (dioxins/furans), cyanides, sulfides, petrochemicals, etc.; Water in swimming pools - disinfection, elimination of organic contaminants, including chloramines and trihalomethanes; Ballast water - biocidal treatment; Groundwater - removal of pollutants; Cooling towers - biocidal treatment, elimination of bacteria, algae and biofilm; Fish farming (aquaculture) - disinfection, elimination of dissolved organic compounds in water, improvement of water quality.

3M 4535 PROTECTIVE COVERALLS TYPE 5/6 DISPOSABLE SUIT - 2XL (BOX OF 20)   Brand:3m Size:2XL Bundle Description:20 Individually Packaged Suits Model:3M 4545 MPN:3M 4535

RHATEX İŞ ELDİVENi ÜRETİM ve PAZARLAMA SATIŞLARIMIZ 📦 TOPTAN Made in Turkey 🇹🇷🧤 👷‍♂️ 🦺 🚜🪛🪚🏗⛏🔨🗜🪓🔧⚒️⚙️🛠🧰 Eldivenimiz %100 pamuk ipliğinden örülmüş %80 lateks %20 nitril ile kaplanmış 75 gr ağırlığında çok amaçlı kullanma ve koruyucu özelliğine sahiptir

WASTE MINERAL OIL AND PETROLEUM PRODUCTS PROCESSING SYSTEMS Waste mineral oil recycling plant distillation refinery manufacturing assembly, The net work of waste oil recycling machines is made from 50 liters to 100,000 liters. The oil produced by the machine can be used as generator fuel without adding any additives. Crude oil processing distillation systems, Fuel oil processing and Bitumen asphalt oxidation systems and Various processing units of petroleum products. Additional information H.K Makine carries out turnkey projects in the country and abroad on waste oil recovery systems (waste oil, mineral oil, bilge oil, machine oil, etc.) of petroleum derivative products. Waste oil recovery facility is a company that tries to keep customer satisfaction at the highest level with its expert staff in installation, piping, electronic installation, automation, design and personnel training. The biggest advantage of H.K Makine in the operation of the waste oil recovery facility is that it does not leave its customers alone in the operation of the system, regardless of whether it is domestic or abroad. Waste Oil Regeneration Process and Machine Operation ●Basically, these types of oils (engine oil, hydraulic oil, gear oil, cutting oil, mixed petroleum oils) are used in waste oil recovery facilities. ● It is the conversion of waste oils into base oils and diesel under high temperature pyrolysis conditions in order to reuse waste oils. ● Waste oils are distilled at high temperatures and hydrocarbon molecules are broken down and a new oil is formed by aligning with a new combination. ● During the distillation process of waste oils, waste oil turns into gas and then turns into oil through the cooling process and is separated according to their density according to the demand and the final product is obtained. ● In the process of improving oxidation, bad odor and color in the refined oil, it removes the residual asphalt, moisture, acid, carbon oxidation in the oil. Obtained Products; ● Diesel ● Thin Base Oil ● Thick Base Oil ● Fuel Oil Waste Oils It is recycled in 2 main ways as Refining and Regeneration and separated according to 3 main categories. refining The process of converting waste oils into base oil or petroleum products in accordance with national or international standards and specifications by refining. Regeneration The process of obtaining original oil in accordance with international standards, specifications and intended use by removing all kinds of pollutants, oxidation products and particles from waste oils.

HK MAKINE carries out turnkey projects in the country and abroad for the establishment of waste oil recycling facility. In Europe, Arab countries and African countries, the installation, assembly, design, electrical installation, piping work, personnel training, automation, insulation, performance tests and commissioning of the waste oil recycling facility at the desired capacity are carried out on a turnkey basis. Waste oils, which are among the hazardous wastes, have been an important part of the management plans of the countries. The Waste Oil Treatment Machine has an important role in minimizing the negative effects of waste oils that harm the environment and human health, and in using these hazardous waste oils with the best possible technologies to benefit the country's economy. Countries need to work in harmony with mineral oil facilities, recovery and disposal organizations, waste oil carriers, laws and regulations, which form the basis of waste oil management. In the management of waste motor oil recovery facilities, in addition to protecting the environment and human health at every stage, sensitivity on safety issues in all services should be kept at the highest level and should be continuously improved. Waste oil and used oil recycling plants are specially designed to convert used oil into quality base oil. Waste oil plants are an economical waste oil re-refining method that is not only an investment but also an environmental benefit. We have incorporated it into the front-end and back-end systems of waste oil recycling plants to perfect the combination of various primary separation and after-treatment steps. It ensures proper dehydration and pretreatment of the used oil so that it can be distilled in high vacuum to prevent cracking in the non-cracking evaporation unit. Working Principle of Waste Oil Recycling Plant Waste oils are converted into base oils and diesel by high-temperature separation method in order to reuse waste oils. By applying high temperature distillation to waste oils, their molecules are broken down and a new oil is formed. During distillation, the waste liquid oil turns into gas, and then it is cooled and separated according to their density in liquid form to obtain the final product. Obtained products; • Diesel • Thin base oil • Thick base oil • Fuel oil Mineral waste oils can be recycled by 2 different methods. These methods are as follows. Refining The process of refining waste mineral oils and converting them into base oil or petroleum products in accordance with national or international standards is called refining. Regeneration The process of obtaining original oil in accordance with international standards and specifications by removing the contaminants and foreign particles found in waste mineral oils is called regeneration. Our company offers turnkey solutions in the establishment of waste oil recycling plant, mineral waste oil recovery plant, waste motor oil recycling machine, mobile waste oil recycling machine, waste oil recovery plant, waste oil treatment machine and factory installation.

We offers high quality hose for oil & gas recovery. Gas station oil and gas recovery refers to the collection of volatilized gasoline oil and gas during the process of loading and unloading gasoline and refueling vehicles, or reducing the pollution of oil and gas by one or two methods of absorption, adsorption or condensation, or change the oil and gas from gaseous to liquid, and then to gasoline again, so as to achieve the purpose of recycling. The oil and gas recovery coaxial hose is used in the oil and gas recovery system of the oil dispenser. During the refueling process, it is connected to the oil and gas recovery fuel nozzle and the oil and gas separation valve. Between the middle layer and the outer wall is an oil circuit, and the middle pipe is a gas circuit. When refueling, the oil and gas are drawn into the underground oil tank from the gas circuit. The metal braid of the tube provides excellent kink resistance, low elongation and long service life.  

EM format, ABS plastic housing. The body shape is round. Operating temperature range From -20°C to +50°C, Operating frequency 125 kHz. Data type : 64 bit serial number.

The WM5000P4D device is equipped with a GPS receiver for tracking the location of the device and using GPS tags, has the function of voice calls to 5 numbers, helps the employee with voice alerts during work, and also has a SIM card slot for online control of bypasses by reading passive RFID and GPS tags from by transferring data to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, and data can also be transferred using a magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. On the side of the case there is an SOS button and a phone call control button. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, as well as vibration and a voice notification. When the battery is low, the display and red indicator show this information, a voice alert is played, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and the program's default settings include a parameter to clear the memory after data is transferred to the program. The battery charge lasts an average of 2 days when reading tags 500 times a day using GPS sending every minute. The device is fully charged in 2 hours. The main advantage of the device is the ability to track GPS location and GPS tags, make voice calls and transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Set: reader, cable, power adapter, cover. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (19 hours when sending data every 15 sec.) Water and dust protection IP 67 Application temperature -50℃~+85℃ Tag reading RFID tags 125KHz, reading distance 3-5 cm Communication 4G/GPRS/GSM/GPS, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display, LED indicator and voice alert.

The WM5000L4 device is a standard model with a SIM card for online control of bypasses by reading passive RFID tags with data transfer to the program via mobile Internet, if there is no connection, the data is stored in the device’s memory and when mobile Internet appears, the data is transferred to the program, the data can also be transferred using magnetic USB cable. The device is suitable for work in all weather conditions, is not afraid of falls, moisture and dust. The device comes with a case, cable, power supply and instructions. The device works with a free program for Windows and with the WEB cloud, but it is recommended that the device work together with the cloud, so if the bypasses are violated in the mobile application, PUSH notifications will come. The device case is made of high-quality impact-resistant plastic. On the front side there is an LCD display that displays information about the status of mobile communication, battery charge, information about reading the tag with the status of data transfer to the program. There is also an LED indicator on the display, which, without turning on the display, informs about the status of the connection and the battery. There is an SOS button on the side of the case. When the tag is read, the display with the status of reading the tag and information about the delivery of data to the program lights up, and vibration occurs. When the battery is low, the display and red indicator show this information, and the device sends a message to the program. RFID key fobs are used to identify employees who have made a round, which are read by the device before the employee changes. The tag can be read again after 60 seconds. The device's memory is non-volatile and can store up to 60,000 tag read records. For example, if you read 500 tags per day, then the memory will be filled after 4 months of daily work. The device's memory is rewritable, and in the default program settings there is a parameter for clearing the memory after transferring data to the program. The battery lasts for 4 days when reading tags 500 times a day. The device is fully charged in 2 hours. The main advantage of the device is the ability to transfer data via mobile Internet from remote sites without the need to connect the device to a computer with the ability to control bypasses online through the program and mobile application. Dimensions, mm 120 x 68 x 32 Weight, g 221 Memory 60,000 records Battery 3.7V/3400mA (4 days) Protection against water and dust IP 67 Application temperature -50℃~+85℃ Reading tags RFID tags 125KHz, reading distance 3 -5cm 4G/GPRS/GSM communication, USB data transfer rate: 12000 records/minute Indication in the device Vibration, LCD display and LED indicator.

We sell new containers for storing oil and other combustible materials, delivery to any city

We supply flocculants of the following brands: anionic flocculants - GREENLIFE A, cationic flocculants - GREENLIFE K, non-ionic flocculants - GREENLIFE N. This flocculant is used for treatment of recycled and waste water; sludge dewatering in public utilities; drinking water purification; in the oil and gas industry for enhanced oil recovery, for the preparation of water-based drilling fluids; in the mining industry for the enrichment of raw materials at any stage and for the dehydration of flotation concentrates, dehydration of tailings; in agriculture to increase the viscosity of water and create more porous soil; in the pulp and paper industry, anionic flocculants are used to maintain the high quality of paper produced while reducing the quality of raw materials; in construction for waterproofing and filling cracks, as well as adhesives in various construction and repair work.