Allsource Dual Station Abrasive Blasting Cabinet, 71in., Model# 41200 - 82496

WASTE MINERAL OIL AND PETROLEUM PRODUCTS PROCESSING SYSTEMS Waste mineral oil recycling plant distillation refinery manufacturing assembly, The net work of waste oil recycling machines is made from 50 liters to 100,000 liters. The oil produced by the machine can be used as generator fuel without adding any additives. Crude oil processing distillation systems, Fuel oil processing and Bitumen asphalt oxidation systems and Various processing units of petroleum products. Additional information H.K Makine carries out turnkey projects in the country and abroad on waste oil recovery systems (waste oil, mineral oil, bilge oil, machine oil, etc.) of petroleum derivative products. Waste oil recovery facility is a company that tries to keep customer satisfaction at the highest level with its expert staff in installation, piping, electronic installation, automation, design and personnel training. The biggest advantage of H.K Makine in the operation of the waste oil recovery facility is that it does not leave its customers alone in the operation of the system, regardless of whether it is domestic or abroad. Waste Oil Regeneration Process and Machine Operation ●Basically, these types of oils (engine oil, hydraulic oil, gear oil, cutting oil, mixed petroleum oils) are used in waste oil recovery facilities. ● It is the conversion of waste oils into base oils and diesel under high temperature pyrolysis conditions in order to reuse waste oils. ● Waste oils are distilled at high temperatures and hydrocarbon molecules are broken down and a new oil is formed by aligning with a new combination. ● During the distillation process of waste oils, waste oil turns into gas and then turns into oil through the cooling process and is separated according to their density according to the demand and the final product is obtained. ● In the process of improving oxidation, bad odor and color in the refined oil, it removes the residual asphalt, moisture, acid, carbon oxidation in the oil. Obtained Products; ● Diesel ● Thin Base Oil ● Thick Base Oil ● Fuel Oil Waste Oils It is recycled in 2 main ways as Refining and Regeneration and separated according to 3 main categories. refining The process of converting waste oils into base oil or petroleum products in accordance with national or international standards and specifications by refining. Regeneration The process of obtaining original oil in accordance with international standards, specifications and intended use by removing all kinds of pollutants, oxidation products and particles from waste oils.

HK MAKINE carries out turnkey projects in the country and abroad for the establishment of waste oil recycling facility. In Europe, Arab countries and African countries, the installation, assembly, design, electrical installation, piping work, personnel training, automation, insulation, performance tests and commissioning of the waste oil recycling facility at the desired capacity are carried out on a turnkey basis. Waste oils, which are among the hazardous wastes, have been an important part of the management plans of the countries. The Waste Oil Treatment Machine has an important role in minimizing the negative effects of waste oils that harm the environment and human health, and in using these hazardous waste oils with the best possible technologies to benefit the country's economy. Countries need to work in harmony with mineral oil facilities, recovery and disposal organizations, waste oil carriers, laws and regulations, which form the basis of waste oil management. In the management of waste motor oil recovery facilities, in addition to protecting the environment and human health at every stage, sensitivity on safety issues in all services should be kept at the highest level and should be continuously improved. Waste oil and used oil recycling plants are specially designed to convert used oil into quality base oil. Waste oil plants are an economical waste oil re-refining method that is not only an investment but also an environmental benefit. We have incorporated it into the front-end and back-end systems of waste oil recycling plants to perfect the combination of various primary separation and after-treatment steps. It ensures proper dehydration and pretreatment of the used oil so that it can be distilled in high vacuum to prevent cracking in the non-cracking evaporation unit. Working Principle of Waste Oil Recycling Plant Waste oils are converted into base oils and diesel by high-temperature separation method in order to reuse waste oils. By applying high temperature distillation to waste oils, their molecules are broken down and a new oil is formed. During distillation, the waste liquid oil turns into gas, and then it is cooled and separated according to their density in liquid form to obtain the final product. Obtained products; • Diesel • Thin base oil • Thick base oil • Fuel oil Mineral waste oils can be recycled by 2 different methods. These methods are as follows. Refining The process of refining waste mineral oils and converting them into base oil or petroleum products in accordance with national or international standards is called refining. Regeneration The process of obtaining original oil in accordance with international standards and specifications by removing the contaminants and foreign particles found in waste mineral oils is called regeneration. Our company offers turnkey solutions in the establishment of waste oil recycling plant, mineral waste oil recovery plant, waste motor oil recycling machine, mobile waste oil recycling machine, waste oil recovery plant, waste oil treatment machine and factory installation.

We offers high quality hose for oil & gas recovery. Gas station oil and gas recovery refers to the collection of volatilized gasoline oil and gas during the process of loading and unloading gasoline and refueling vehicles, or reducing the pollution of oil and gas by one or two methods of absorption, adsorption or condensation, or change the oil and gas from gaseous to liquid, and then to gasoline again, so as to achieve the purpose of recycling. The oil and gas recovery coaxial hose is used in the oil and gas recovery system of the oil dispenser. During the refueling process, it is connected to the oil and gas recovery fuel nozzle and the oil and gas separation valve. Between the middle layer and the outer wall is an oil circuit, and the middle pipe is a gas circuit. When refueling, the oil and gas are drawn into the underground oil tank from the gas circuit. The metal braid of the tube provides excellent kink resistance, low elongation and long service life.  

We sell new containers for storing oil and other combustible materials, delivery to any city

Price: $2,449 per item. Minimum order: 1 piece Allsource Dual Station Blast Box 71" Model No. 41200. The Allsource Dual Station Blast Box allows two operators to blast at the same time and, by covering twice the area at the same time, increases productivity and saves valuable time. Also great for large projects, the large work area eliminates the need to move heavy and bulky items inside the cabinet - the operator can simply move to the other side and continue blasting. Made from heavy duty 14 gauge steel with durable powder coating for long life. Includes gloves, light kit, CFM dust collectors, ceramic nozzles, blast guns, air pressure regulators and foot control pedals. What's included (1) Allsource 41200 blast cabinet with gloves and light kit (2) 90 CFM dust extractors (4) 6mm and (4) 7mm ceramic nozzles (2) Sandblast guns (2) Air pressure regulators (2) Foot pedal Controls Product ManualKey Specs Item# 89460 Trademark AllSource Manufacturer's Warranty 1 Year Limited Warranty Shipping Weight 600.0 lbs Operating PSI 80-110 Air Consumption (CFM) 15-20 per side Body Material 14 gauge steel Body Finish Powder Coat Main Door Dimensions (inch) 29 x 38 Window dimensions (inch) 30 inches. x 15 inches. on 2 sides Recommended Media Any type of dry abrasive such as glass beads, plastic chips, aluminum oxide, and silicon carbide Media Capacity (cu. ft.) 100 lbs. at least 200 to 300 kg. maximum guns included Yes, 2 nozzle sizes (in) 6mm and 7mm gloves included Yes Pedal included Yes, 2 sizes W x D x H (in) 71 x 55 x 73 Product weight 596 lbs

Where is MECHANICAL SEAL Used? The parts that provide sealing between two machine parts, one of which is movable and the other fixed, are called shaft seal. It is generally used in places such as pumps, taps, shaft bearings. Where are ROTARY HEADS Used? It is used to transfer fluids such as hot water, hot oil, steam etc. to a fixed axis over the rotating drum.

“SA International” - Shanghai Asia International Electrical & Mechanical Co., LTDispart of theSIBC Group, which has been providing equipment and technology selection services in various fields since 2017.   -   Construction.- Road construction.- Metallurgy.- Mining.- Chemical industry.- Production lines for various purposes.   We are trusted by clients in Europe, USA, Canada, Malaysia, India, South Korea, Russia, Thailand. The company " SA International " has an official representative office on the territory of the Russian Federation, in the city of Krasnodar to simplify cooperation, document circulation and customs clearance for our clients. Cooperating with our company, you can be confident not only in the quality of the supplied equipment, but also in the after-sales service.    We provide:   - Machinery and equipment for the construction industry, such as:Asphalt concrete plants / plants (ABZ), concrete mixing plants / plants (BRU / RBU), self-propelled concrete mixers with self-loading function, concrete pumps, lines for the production of tiles and blocks, etc.   - Equipment for mining: crushers, screens, screens, conveyor belts, pumps, etc.   - Alligator scissors and metal presses.   - Cargo and wheeled vehicles: loaders, excavators, bulldozers.   - Storage equipment.   - DES and electric motors.   - Chemical reagents and components.   Also, "SA International" is a manufacturer of conveyor belts.   Over the years of working with factories in China, we have earned a reputation as a reliable partner and a center of excellence for quality assessment among our customers. Our managers will conduct a full market assessment, advise you on all emerging issues, provide complete information as soon as possible, and engineers will monitor the entire production process to minimize the percentage of defects and will train your staff.   An additional advantage of working with us will be that the managers of "SA International" know all the logistics processes, offer competitive prices and the shortest delivery times.

Bentonite mud powder for PBG drilling fluids in big bags

The K200 console is intended to eliminate an emergency leak. The console is represents a magnetic block, which is also the hull of the unit. On the block with the help of a bracket fixed sealing unit, which includes a press-screw and a replaceable rubber sealing element. The set of delivery includes two types of sealing elements: a cone with a diameter of 12 mm and a flattened cone with a diameter of 12 mm and 5 mm. The mount allows you to replace one type of sealing element with another in few seconds. Fastening the press-screw to the bracket provides the ability to move the sealing unit in the transverse direction relative to the body by a stroke of ± 2 mm and tilt the sealing unit in the longitudinal plane in the range of angles 5 ° - 60 ° in vertical. Installation and removal of the K200 console carrying out by using a handle. A cone is used to seal round holes, in other cases a flattened cone. Product technical characteristics: Type – Console unit Pressing force of the magnetic blocks to the metal surface - Not less than 200 kgf Diameter of the sealed tank (pipeline) - From 80 to 100 mm Maximum diameter of the sealed gap - At a pressure of 25 atm - not less than 3 mm Installation time, min - 1 Required amount of workers - 1 Dimensions, mm - 149x96x61 Weight, kg - 0.9 Service life - At the very least 10 years.

  We develop, design and quality, professionally on the basis of design documentation, industrial safety assessments, strength calculations, certification of all welding technologies, welders and specialists, we manufacture equipment automated for processing any hydrocarbon raw materials with software. Installations for the processing of oil, gas condensate, fuel oil, used oils, prepared oil sludges, coal tar and oils, straight-run low-octane gasolines, and bottom water from sea vessels. At the installations you can receive - gasoline, diesel fuel, fuel oil, naphthalene, coal pitch, light marine fuel, base oils, road and building bitumen, etc. We manufacture the following types of equipment: Atmospheric refineries for oil and gas condensate refining. Vacuum refineries for the processing of heavy oils, fuel oils, tars. Catalytic cracking units. Alkylation plants. Catalytic reforming unit. Thermal cracking unit. Hydrocracking unit. Installation of isomerization and zeoforming. Hydrotreating unit.   Any equipment performance. Equipment warranty 18 months. The entire package of documents is provided. Our organization also provides installation supervision, start-up, training. We provide after-sales service and field supervision. The payback period of the equipment is several months. There are two refineries with a capacity of 30 and 100 tons per day.  

AMAR GROUP HOLDING LLC is a multi-profile manufacturing and trading holding with a 10-year history and its head office is located in Samara, Russia. Our holding is the official sales representative of the Autocrat Automobile production holding in the Middle East, the CIS and Africa.LLC APH "TD Avtokrat-T" is a member of the group of companies of the automotive holding "AVTOKRAT", and for more than 4 years produces lifting units of the "BARS" series for repair and drilling of oil and gas wells, production of metal structures, spare parts and components for lifting units, etc.To date, we have mastered the production of units with a load capacity of 40, 50, 80, 100 and 125 tons, manufactured on self-propelled chassis and on the basis of a semi-trailer. Units with a load capacity of 140 and 160 tons are under development. Currently, more than 300 units of lifting units have already been sold.Price list for lifting units of the model LEOPARDPrices are quoted in Russian rubles on EXW terms. In dollars, the price is based on the exchange rate of the Central Bank of the Russian Federation on 21/04/2020 – 76,28 USD№ п/п Model of lifting unit Exclusive prices for the middle East and Africa region Please find a detailed description in the catalog by page number 66,911 BARS-40 18 000 000,00 235 972,73 32 BARS-50 20 000 000,00 262 191,92 53 BARS-50N 80 000 000,00 1 048 767,7 74 BARS-80 25 000 000,00 327 739,90 95 BARS-80 42 000 000,00 550 603,04 116 BARS-100 45 000 000,00 589 931,83 147 BARS-100 53 000 000,00 694 808,6 168 BARS-125 60 000 000,00 786 575,77 199 BARS-140 70 000 000,00 917 671,73 2210 BARS-160 100 000 000,00 1 310 959,62 2511 BARS-10K 90 000 000,00 1 179 863,66 2812 BARS-20К 105 000 000,00 1 376 507,6 2913 BARS-30К 120 000 000,00 1 573 151,55 30Our company specializes in the production and supply of the following types of equipment:- lifting units of the "BARS" series for repair and drilling of oil and gas wells with g/p from 40, 50, 80, 100, 125tn and above;- coiled tubing installations of the BARS series»;- spare parts and accessories for lifting units and installations of the BARS series»;- equipment and special equipment for the oil and gas industry;- serial KAMAZ vehicles;- special equipment on the chassis of KAMAZ truck tractors, dump trucks, on-Board / on-Board with CMU, cementing units-CA, oil field tanks, mobile steam generator sets-PPUA and other for the oil and gas industry;- containers and reservoirs for receiving, dispensing, and storing various liquid media;- equipment for control and registration of technological processes.We are ready to offer you high-quality oil and gas equipment, including drilling rigs at excellent prices, based on Your needs.We thank You for your interest in our company and look forward to long-term cooperation.With respect,CEO-FOUNDERLLC HOLDING AMAR GROUP Mr. RAIF SAFIN F.

Nitrogen, like any other gas, cannot be stored and transported without being placed in special containers. Typically, nitrogen tanks are metal vessels that store compressed nitrogen. The main characteristics of nitrogen tanks are: volume, throughput, maximum allowable pressure. They can be horizontal or vertical and connected in parallel or in series.