Spectrophotometer serie 4100 - 97128

FEATURES: - The 40cm diameter sterilization chamber offers large space to meet various sterilization requirements. - The latest Inspiration microcomputer high-speed intelligent control system is highly reliable to not only realize complete control of the sterilization process, but also ensure convenient maintenance, query, calibration, recording and future scalability. — Special waste sterilization procedures have been established for effective sterilization of laboratory waste. — Thorough drying in accordance with CE standard. — Simple and clear control panel. — Several sterilization procedures and heating procedures are provided, such as sterilization, heating and drying of solids and liquids, melting and heating of agars. There are up to 60 cycles that can be created and saved for quick use. - Unique "eight-column evenly distributed" locking device is safer and more reliable than conventional locking devices.

Description Mobile support with micrometric control. Placing controls manually by micrometer. Dimensions: 185X145mm; Travel: 25mm (X) x 25mm (Y); Micrometric controls resolution: 0.01mm.

Description For applications subject to verification, also request initial verification at the same time because it cannot be done later. Factory verification, we need place of installation with zip code. Indication of capacity. A rising strip of light indicates the weighing range still available 4-digit identification number, freely programmable via 2 keys Robust and stable metal cover Technical data: Additional technical measurement data: 627- ABJ220-4M Max measuring range: 220 g Reading d: 0.0001 g Reproducibility: 0.0001 g Linearity: ± 0.0002 g Stabilization time: 5 s Sensitive deviation (° C): 2 * 10 ^ -6 Housing dimensions WxDxH: 225x315x330 mm Housing material: metal Windshield WxDxH mm: inside: 190x159x225 mm Windshield material: glass Packaging dimensions WxDxH (mm): 500x390x535 Gross weight kg: 9 Net weight kg: 7 Weighing pan dimensions (Ø / AxP): 8 cm

Description For applications subject to verification, also request initial verification at the same time because it cannot be done later. Factory verification, we need place of installation with zip code. Large, backlit LCD display with 52mm high digits Industrial quality: Ideal for long-lasting use in the industrial sector thanks to its stable construction and its robustness Table base plate wall support for indicating device, standard Weighing with tolerance range (check-weighing): Entry of an upper / lower limit value. An optical and acoustic signal facilitates the process of rationing, dosing or classifying by way of counting Sum of weight values Dynamic weighing: a stable mean value is created at the press of a key in the event of uneven ambient conditions or animal weighing Technical data: Max measuring range: 30 kg; 60 kg Reading d: 10 g; 20 g Reproducibility: 10 g; 20 g Linearity: ± 10 g; 20 g Stabilization time: 2 s Sensitive deviation (° C): 5 * 10 ^ -6 Housing dimensions WxDxH: 560x300x490 mm (incl. Pole) Housing material: plastic Packaging dimensions WxDxH (mm): 470x800x240 Gross weight kg: 12 Net weight kg: 10 Weighing pan dimensions (Ø / AxP): 400x300x128 mm

Description Biological binocular microscope, lens 4x, 10x, 40x, 100x Binocular biological microscope with 4x, 10x, 40x and 100x objectives. This type of equipment is recommended for research centres, laboratories or hospitals. It allows for viewing in detail cells, bacteriae, fungi or tiny tissues. Lenses: Magnification: 10x Focal length: 25 Lens diameter: 18 mm / 0.7 in Features: Head: binocular Swivel: 360 ° Inclination: 45 ° Eyepieces: WF 10x18 mm (2 units) WF 16x (2 units) Objectives: plan achromatic 4x, 10xPh, 40xPh, 100xPh (immersion). Revolving nosepiece: quadruple Stage: DIM 160 x 142 mm (6.3 x 5.6 in), movement range 76 x 52 mm / 3 x 2 in Focus range: 14 mm / 0.5 in Condenser: 1.25 NA Abbe with centering system Illumination: white LED, with brightness control Dimensions: Length: 140 mm / 5.5 in Width: 190 mm / 7.48 in Height: 350 mm / 13.8 in Weight: 3 kg (6.6 lb) approx

Micromotor for podiatry model Micronam300 which can reach a maximum speed of 35000 rpm. Features an ergonomic and functional design. Moreover, it has an automatic stop switch in order to avoid malfunctions.  

Description VORTEX shaker with speed control Features: Can work continuously or discontinuously by contact Analogue speed control in the range of 0 - 2500 rpm Clicking adapter fixing system providing security Strong housing in casting with good stability Silicon pads and steel base specially designed to absorb the vibrations Eccentric wheel bearings Plate dimensions: 182x450mm Technical specifications: Power(W) 60 Shaking movement orbital Diametr of shaking orbit (mm) 4 Allowable working time 100 % Rango Velocidad (r.p.m.) 0 - 2500 Precisión ajuste de velocidad (r.p.m.) Analógico Tipo de funcionamiento modo continuo / modo por contacto Dimensiones (L x l x h) (mm) 127 x 130 x 160 Peso Weight (Kg) 3,5 Clase de protección según DIN EN60529 IP 21

Description Single Arm Base head supports.Measurements:      Base: 230 x 230 mm      Vertical bar column: Ø32x380mm      Horizontal arm: 430 mm

Description Printer for autoclaves 922. Features: External Printer: Prints the details of the programme cycle. Includes 1 paper roll Measures: Height: 7.2 cm Width: 8.5 cm Depth: 11.5 cm

Description Autoclave Black Dragon 12 liters class B for tattoo studios. Programmes:   Programmes Temperature Pressure Sterilisation time Total time Type Max. load Max. load per tray Solid 134 0C 210 kPa 4 min 14-30 min Solid unwrapped 4 Kg 1.2 Kg 1210C 110 kPa 20 min 30-45 min Wrapped 134 0C 210 kPa 4 min 30-45 min Solid unwrapped 3.5 Kg 1.1 Kg 121 0C 110 kPa 20 min 35-55 min Solid or hollow simple wrapped 3.5 Kg 1.1 Kg Liquid 134 0C 210 kPa 10 min 30-55 min Liquid 0.80 kg 0.25 kg 121 0C 110 kPa 30 min 35-60 min Textile 134 0C 210 kPa 8 min   30-50 min Porous unwrapped 1 Kg 0.3 Kg Porous simple wrapped 0.75 Kg 0.2 Kg 121 0C 110 kPa 30 min 40-60 min Porous double wrapped 0.5 Kg 0.15 Kg Hollow simple wrapped 3.5 Kg 1 Kg Solid or hollow double wrapped 1.5 Kg 0.5 Kg Prion 134 0C 210 kPa 18 min 30-50 min Porous unwrapped 0.1 Kg 0.3 Kg Porous simple wrapped 0.75 Kg 0.2 Kg Porous double wrapped 0.5 Kg 0.15 Kg Hollow simple wrapped 3.5 Kg 1 Kg Solid or hollow double wrapped 1.5 Kg 0.5 Kg B&D test 134 0C 210 kPa 3.5 min 22-35 min - - - Helix test 134 0C 210 kPa 3.5 min 22-35 min - - - Vacuum test - - - 18-20 min - - - Safety: A cycle will not start unless the door is firmly closed. An automated system with double hydraulic locking device prevents the door from opening while chamber is pressurized. The safety valves prevent overpressure in the generator and in the chamber. A safety thermostat prevents overheating in the chamber and in the generator. An automatic safety lock prevents accidental opening of the door during the sterilisation. A power protector automatically cuts off power in case of short circuit or if power supply is not very stable. The failure alarm indicates a cycle failure and provides an error code. The door alarm indicates that the door is not properly closed. The low water alarm indicates when the water tank is empty or too full.  Technical features: Power supply: 220-240V; 50/60Hz; 10A Chamber: 200 x 360 mm Breaker: F16A / 400V Nominal power: 2200VA Sterilisation temperature: 121 0C / 1340C Capacity of the distilled water tank: 2.5 L Working temperature: 5 0C / 40 0C Working relative humidity: Max. 80%, non condensing Overall dimensions: 414 x 365 x 570 mm Net weight: 51 Kg Max. noise level: <70 dB Atmospheric pressure: 76 / 106 kPa Components: Distilled water tank LCD display Control panel Main power switch Drain connector (distilled and used water tank) USB port Safety valve Ventilation grid Circuit breaker Power cable Rating plate Accessories included: Steriliser USB 3 instrument trays Tray rack Tray holder Door adjustment tool 2 draining hoses Door gasket User manual Standards: 93/42/EEC Directive on Medical Devices. 97/23/EEC Directive on Pressure Equipment. EN 13060 Small Steam Sterilisers. EN 61326, EN 61000 Electromagnetic Compatibility. EN 61010-1, UL 61010-1 Safety requirements. EN 61010-2-040, IEC 61010-2-040 Specific requirements for steam sterilisers used for treatment of medical materials. AUTOCLAVE - step by step: Open the door, take the tools and accessories that are within the sterilisation chamber, remove the wrapper and clean them. Connect the power cord to a suitable power source. Connect the printer (optional. It is sold separately, ). Switch on: The main switch is located on the right bottom area in the front panel. Once activated, the LCD screen is on, where basic operation icons such as the position of the door, the water level, the sterilisation programme, date, time, etc. appear. Fill tank with distilled water. Remove the top lid and fill, if you hear a signal, it means that you exceeded the permitted level of water in the tank, please stop immediately and drain the amount of water necessary for the signal off. Preparation of instruments: Place instruments made of different materials in different trays, however take care to separate them before sterilisation. If the instruments are not stainless steel, put some sterilisation paper between the tray and the instruments. Do not allow direct contact between instruments of different materials. Verify that all instruments are in correct position. Place instruments such as lenses, containers, tubes, etc. inverted, so that water does not stagnate within them. Do not overload the trays beyond their limit. Do not overlap the trays on top of each other, or put them in direct contact with the wall of the sterilisation chamber. Do not use metal clips or pins, this may impair the operation of the steriliser. Wrap the instruments one by one. If you need to wrap several instruments together, make sure that they are made of the same material. Seal the pouch with special adhesive tape for sterilisation or use a heat sealer. Make sure that the pouch is properly positioned within the chamber on the trays (resting on the plastic part). Choose the sterilisation programme. Start the sterilisation cycle. After selecting the sterilisation programme, insert instruments into the chamber on the trays, using the supplied plastic handle. Once the instruments are placed within the chamber, close the door by turning the knob. Caution: make sure to close the door, otherwise the steriliser displays an alarm and can not start or the programme stops during the cycle. Start the sterilisation programme. Press the start button, then the steriliser starts operating during approximately 30-75 minutes. Sterilisation cycle finished. After finishing the sterilisation cycle, the printer (not included*) will print the full report automatically and the data will be saved in the USB memory (.txt format). After the pressure drops to zero, you can open the door and remove the instruments. The steriliser alerts by a beep once the sterilisation cycle is completed. Caution: Use the supplied plastic handle for supporting trays when you take out the instruments. IMPORTANT: Do not reuse used water. Installation: There must be at least 10 cm of free space around the steriliser, 25 cm at the top, and enough room to open the door. The place where the steriliser is used must have proper ventilation. The steriliser must be placed on a stable surface and at an appropriate height for handling. Do not cover or block the lateral outlets or the outlet air grid of the condenser fan. Do not place the steriliser near water sources. Keep away from heat sources. Example of printed report: ================================Programme: WRAPPED Temperature: 134CPressure: 206.0 kPaDrying time: 08minSterilisation time: 4.0Min--------------------------------Time Temp. pressureStart 12:28:17 089.0CT1: 12:31:32 087.1C -075.0kPaT2: 12:33:43 110.2C 052.0kPaT3: 12:36:37 088.9C -080.0kPaT4: 12:39:20 114.7C 053.7kPaT5: 12:43:37 087.9C -080.0kPaT6: 12:50:40 134.8C 206.0kPaTS: 134.7C 209.5kPaMax. Temperature: 135.2CMin. Temperature: 134.3CMax. Pressure: 214.0kPaMin. Pressure: 204.9kPaT7: 12:54:39 134.4C 211.4kPaT8: 12:57:36 102.1C -060.0kPaT9: 12:59:54 098.2C -060.0kPaEnd 13:04:07 102.4C--------------------------------Cycle No .: 00017Result: successDate: 07/06/2014SN: E54723operator:================================

Description Autoclave Prestige 2100 Classic 9 litres. Characteristics: Designed to sterilize unwrapped solid instruments.   Capacity 9 Litres. With basket for instruments sterilisation Technical specifications: Height  335 mm Width  340 mm Weight 4.5 Kg Capacity 9 litres Dimensions of the internal chamber (depth / height) 210/230 mm Maximum length of the instruments 228 mm Maximum weight of load  3.0 Kg Operating pressure 1,4 bar Voltage  230V Power 1500W Frequency  50-60Hz Temperature 121º Sterilisation time  11 minutes Total cycle time 22 minutes Water volume  0.75 litres

Description New easy-to-handle mini T bath designed with a special size so compact it fits in the palm of your hand. It has multiple interchangeable metal blocks and precise temperature control that give it great versatility of use in biochemical, medical, chemical or veterinary research laboratories, resulting especially in great application in molecular and genetic biology (DNA samples, lipid extraction and other cellular components, protein denaturation, etc.). Characteristics: Easy to program and use LCD display Simultaneous display of actual and programmed time and temperature Temperature drift adjustment allows adaptation to different needs Acoustic signal of program end. Mini-dimensions: its size is so compact that it fits in the palm of your hand. Various aluminum blocks available (not included) to cover a wide range of tubes (From 2.0 ml to 50 ml) and other types of containers. Technical characteristics: Temperature range: RT + 5 ºC - 80 ºC Timer: 1 - 999 s / 1 - 999 Min Temperature control precision: ± 0.5 ºC Temperature resolution: 0.1 ºC Heating time (from 20ºC to max. Temperature): ≤12 min Temperature control precision at: 40ºC 0.3 ºC Dimensions (L x W x H): 110 x 150 x 80 mm Weight: 0.5 Kg