Разгонщик фланцев гидравлический РФГ-14 ПОЛИДЭК - 42790

New from storage never used. The signaling device for toxic and combustible gases STG-1 is used to issue an alarm about exceeding the established values ​​​​of the mass concentration of carbon monoxide in the air and the volume fraction of combustible gases (methane or propane-butane mixture). each alarm threshold allowing to turn on (turn off) ventilation, a siren and other actuators; - connection of the DU to the BCS with a three-wire cable; communication lines DB with BKS; - convenience in operation and ease of maintenance. Sensor block for signaling devices STG1-1D10 Price for everything in the photo

Diagnostics, repair, programming of industrial controllers We will repair controllers DEIF, COMAP, DSE, DATAKOM and others. We carry out repairs as soon as possible! Diagnostics of equipment and determination of the cause of failure of the control unit. Alternator control unit firmware: replacement or software update. Replacement of previous generation controllers with new ones, programming for your generator, power plant and needs. Controller repair, replacement of individual elements. Installation of the controller into the generator and commissioning.

Hose drum

Driver 

Material: Natural Latex, Cotton Yarn, PVC Dots Size: Custom Made Surface Treatment: Anti-slip PVC dots Technics: Handmade PVC Dots Application: Industrial production, agriculture, horticulture, glass industry Sample: Free Shipping Certification: CE ISO OEM: Available Color: Black / Gray / White

Separator - an apparatus that allows you to separate the product into fractions with different characteristics. This equipment is actively used in oil fields and oil refineries. Mesh gas separator GS, oil and gas separator NGS, oil and gas separator with water discharge NGSV, flare separator FS are the main types of separators that are used in the oil industry. The devices differ in purpose, scope, operating conditions and technical characteristics: volume, nominal pressure, design temperature.

Capacitive cylindrical apparatuses for liquid and gas media

Designed for pumping air through gas purification units of nuclear power plants, transporting explosion-proof, toxic gases that do not contain droplet liquid and mechanical impurities. The gas blower is a rotational compressor machine made of stainless steel, driven by an electric motor through an elastic coupling. The gas blower can be operated at a suction gas temperature of -10 ° C to + 40 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY E21-50-4A Max. pressure difference, kPa, mode 50 Productivity, m3 / min 1.44 Power of electric motor, kW 4.0 Weight, kg 240 Overall dimensions (length x width x height), mm 1085 x 520 x 510

Designed for the transport of air, toxic and aggressive to oil gases, non-corrosive to cast iron and structural steel, explosion-proof in the flow part and not containing droplet liquid and mechanical impurities. The gas blower is supplied driven by an electric motor through an elastic coupling. Delivery options with an explosion-proof or general industrial electric motor are possible. The gas blower can be operated in pressure or vacuum modes at an ambient temperature of -10 ° C to + 35 ° C. NAME OF PARAMETERS \ MODEL GAS BLOWING ROTARY 1G21-30-2V Max. pressure difference, kPa, pressure mode: 30 vacuum: 30 Productivity, m3 / min 4.32 Power of electric motor, kW 4.0 Weight, kg 285 Overall dimensions (length x width x height), mm 1050 x 450 x 545

The flange alignment tool is aimed at axial alignment of flange oil and gas pipelines, central heating stations, etc. during their assembly. VFG-9 is distinguished by excellent operational characteristics: high performance and speed of operation, long-lasting operation without additional service. Maximum force of 88.20 kN and operating pressure of 700 bar ensure top quality and speed of operation at small oversize of the tool. Force – 90 kN Maximum operate pressure – 700 bar Gydrocylinder rod stroke – 70 mm Operating distance - up to 245 mm Flange diameter - up to 1000 mm Fastener hole diameterof flanges aligned - not less 38 mm. Oversize: (LxWxH), mm - 510х140х255

The flange alignment tool is aimed at high quality elimination of axial and rotational distortions of flange joints on pipelines of different application. Having compact size, small weight and maximum force of 1 tf only, this item of a flange alignment tool has the following exceptional characteristics: high performance, high speed of operation, reliability and durability. Force – 1 kN Compact body – 3.5 kg Oversizes (LxWxH), mm: - 234х25х151

Force: 150 kN Min. gap: 6 mm Max. opening: 94 mm.⃰ Weight: 6 kg Operating pressure: 81 sm3