Home supplies and appliances in bulk on Qoovee

Model 3000 VA is a popular model that can already perform two functions - either to connect powerful equipment or, at very low voltage, to provide small devices with good voltage. For example, if you have 110-120 volts of input voltage, then according to the graph below, the allowed input power will be 80% or 2400 watts. Agree, with such a low voltage it will be a very good solution! High speed response to changes in input voltage. Power surges are instantly “processed” by the microcircuit and relays (10 ms). Full nominal already when the input voltage reaches 140 volts. Automatic commissioning, continuous network testing. It is frost-resistant, temperature condition of work from -300 C to +500 C, compulsory cooling at high temperatures of a winding. Universal case - can be put on the legs, or hanged on the wall with a fastener (supplied with each stabilizer). Short circuit protection Overload protection (overheating) Undervoltage protection Overvoltage protection Protection against impulse (lightning) dischargesEffective smoothing of impulse noise in the network

The most popular model for providing 220 V  computer and audio-video equipment. A wide operating range of 120-285 Volts, instantaneous speed of operation. This voltage stabilizer is popular among users in many countries. Thousands of gas boilers are protected by SUNTEK 550 VA voltage regulators. Simple and reliable, fireproof and convenient. We received many different epithets for this model. A 3 year warranty confirms our words and gives the user confidence in the reliability of this equipment.And now the facts: 1. Operating range 120-285 volts2. In the range of 140-270 Volt, the stabilizer fully corresponds to the nominal, it can be seen on the video!3. The presence of lightning protection allows it to be used in difficult weather conditions in India, the UAE, and African countries.4. Installed relays in the stabilizer provide up to 100,000 switches each. If each relay switches 20 times a day (a total of 80 times), even with such conditions, the resource will be enough for almost 14 years of work!Silver on the contacts eliminates their sticking.

The wooden knife is made of beech. Suitable for butter, pates, jams. Mineral oil treatment is required. With constant use, treatment once a week.

The wooden serving plate is made of beech wood. Various options for its use expand the functionality. Mineral oil treatment is required.

The gravy boat is made of beech with a capacity of 40 ml. We recommend additionally purchasing mineral oil, it is certified from us, for processing wooden products. Then they will serve you for a long time and retain their aesthetic appearance.

Round serving board with a groove made of precious wood - beech. Beech is wear-resistant, does not crack, has an expressive texture and contrasting veins. Our products have proven themselves not only in Russia, but also in Europe and North America. Quality assurance and fulfillment of orders on time.

DYSON Supersonic HD08 Hair Dryer DYSON Supersonic HD08 Hair Dryer Gift Box Prussian Blue Black Purple/Fuchsia Nickel/Prussian Blue/Big Red/Copper Gold 8 Head Curler Full Version Rose Red with Velvet Bag HS 01 Curling Iron with 8 heads, full version, HS01 Purple color, Full Gift Box. 8 Head Curler Full Version, HS01 Red Complete Edition Gift Boxed HS05 Styler LONG Version (6 Heads) Blue/Purple Nickel/Copper Gold Dyson Purifier Cool Autoreact TP7A Air Purifier Silver White Dyson Pure Air Purifier Cool tower, TP04 Silver White Dyson Purifier Cool Formaldehyde TP09 Air Purifier Black Gold/White Gold Dyson Hot+Cool Air Purifier HP07 Black Gold/White Gold Vacuum V12 Detect Slim Total Clean EXTRA Vacuum V10 digital slim fluffy Vacuum Cleaner Dyson V8 fluffy EXTRA Vacuum cleaner Dyson V8 fluffy plus

DESCRIPTION Industrial water spray cooling fans are designed for spraying of humidified and cooled air on workplaces in hot workshops of iron and steel, coke-chemical and machine-building plants and for other similar purposes (at the ambient temperatures of up to +40°C).    Industrial water spray cooling fans are installed near equipment generating maximum heat: dryers, rollers, calenders, vulcanizing and hydraulic presses, etc. The industrial fans are used at mining and processing plants, metallurgical plants and just for cooling hot workshops or production facilities in hot weather. It is often used as Man cooler in hot workshops if water feed is cut off or the model initially is without water feed.    Setup and Principles of Operation The industrial water spray cooling fan has a vertical design and consists of the following main units: axial fan, support, housing, compressed air supply cock, water supply cock, nozzle, and guard.   After turning on the industrial water spray cooling fan, the cocks regulate the compressed air supply, and the water is evenly supplied in the amount sufficient for humidification.   The industrial water spray cooling fan without the water supply is used as a blower fan at enterprises of other industries. Industrial Man cooler is used at workshops without conditioner.    Terms of Use ambient temperature from -40°C to +40°C, relative humidity up to 80% at 25°C in a temperate climate.

ESCRIPTION The air heating unit worms the air using the heat of hot or overheated water or steam coming from external sources of heat supply and is designed for air heating (including standby heating) of industrial premises, the technological process of which is not accompanied by any release of dust or explosive gases.  The unit should be operated in areas with a temperate climate. The heat transfer agent temperature should not be higher than 180°C and the pressure should be not higher than 1.2 MPa.  Principle of operation: When the fan is in operation, the air is taken from the room and heated up as it passes through the air heater. Air heater consists of finned tubes with working media hot water or steam. Then it is ducted through the fan working wheel blades into the heated area.   If heat transfer agent change on cool fluid then the unit works as cooling equipment.

We manufacture Explosion proof and Corrosion resistant radial Fans. Copper inserts at blades of working wheels, pulleys and other parts exclude spark appearance. Explosion-proof motor. The body of the fan is manufactured from AISI 304. According to the customer needs we make belt drive for easy maintenance. Rated diameter of working wheels is up to 2400 mm.

Explosion Proof Axial Mine fans (ATEX mine fans) for local-ventilation are used for safety work in coal and ore mines dangerous by gas or dust. Explosion-proof removable motor. Rated dimensions: 400 mm, 500 mm, 630 mm, 800 mm, 1200 mm.   Mine Fans work with air density up to 1.3 kg/m3, a temperature from -20 to +35C, dust content up to 50 mg/m3 and a relative humidity up to 95% (at a temperature of 25C).    Can be equipped by overheating shutdown device, with/without silencerCan be used for ventilation of small grooves. The design allows to connect two fans in one-by-one positioning in order to increase the pressure in the pipeline.The fan design uses an antistall device.    MMF-12 fans with rated diameter 1200 mm are manufactured with the blade angle 15, 25 or 35 degrees according the customer technical task.   Persian: اطلاعات تکنیکی کارخانه گلازوفسکی "متالیست" فن تهویه موضعی تک مرحله ای محوری با موتور قابل جابجایی ضد انفجار، طراحی شده برای تهویه عملیات معدن بن بست در معادن زغال سنگ و سنگ معدن، تونل ها، از جمله آنهایی که برای گاز و گرد و غبار خطرناک هستند، با چگالی هوا تا 1.3 کیلوگرم بر متر مکعب، درجه حرارت از -20 درجه تا +35 درجه سانتیگراد، میزان گرد و غبار تا 50 میلی گرم بر متر مکعب و رطوبت نسبی تا 95٪ (در +25 درجه سانتیگراد).

Universal water meter by METER LLC 1/2" SVU15-110 mm with gaskets and a set of mounting parts. This universal apartment (household) water meter is a single-jet, dry-running and with high accuracy measures the flow of cold and hot water passing through the water supply system. Installation of this water meter at home allows you to significantly reduce the cost of paying utility bills.The company "METER" is one of the leaders in the production of apartment water meters in Russia and offers reliable and high-quality solutions.Cold and hot water meters are designed to measure the volume of drinking cold and hot water by individual by consumers according to SanPiN 2.1.4.1074-01.In terms of resistance to ambient temperature and humidity, the meters correspond to version B4 in accordance with GOST 12997. In terms of metrological classes, the meters correspond to class "B" for horizontal installation or class "A" for vertical installation in accordance with GOST R 50193.1 .Diameter of conditional pro travel, mm: 15 Nominal pressure, MPa (bar): 1.6 (16) Water temperature, : 5...90 degrees Nominal flow rate, m3/hour: 1.5 Maximum flow rate, m3/hour: 3.0 Overall dimensions, mm, no more : - length: 110 - width: 63 - height: 70 Equipment - Vane meter for cold and hot water SVU-15-110mm - 1 pc. - Passport - 1 pc. - Operation manual - 1 pc. - Mounting kit Fitting - 2 pcs. Nut - 2 pcs. Gasket - 2 pcs.

Maximum flow, m3/h 10 Nominal flow, m3/h 6 Minimum flow, m3/h 0.06 Measurement error in the range from Qmin to 0.1 Qnom, % ± 2.0 Measurement error in the range from 0.1 Qnom to Qmax, % ± 1.0 Pressure loss at maximum flow rate, Pa ≤400 Meter sensitivity threshold, m3/h 0.012 Ambient temperature operating range, °С from -40 to +60 Maximum allowable pressure of the measured medium, kPa 5 a meter for several apartments, a country house, a summer cottage or a cottage economy, then the Prince G6 gas meter is suitable. The device is designed to measure gas flow up to 10 m³/h. The direction of gas flow can be absolutely any. Installation of equipment is possible both indoors and outdoors. Also, this equipment is equipped with a built-in thermal corrector.

Maximum flow, m3/h 6 Nominal flow, m3/h 4 Minimum flow, m3/h 0.040 Measurement error in the range from Qmin to 0.1 Qnom, % ± 2.0 Measurement error in the range from 0.1 Qnom to Qmax, % ± 1.0 Pressure loss at maximum flow, Pa ≤400 Meter sensitivity threshold, m3/h 0.030 Ambient temperature operating range, °C from -40 to +60 Maximum allowable pressure of the measured medium, kPa M "G4 is suitable for installation in two apartments or a country house. The device is designed to measure gas flow over 6 m3/h. The counter is equipped with an internal thermal corrector. Equipment can be installed both indoors and outdoors. The direction of the gas flow can be any. Gas meters are manufactured in explosion-proof design in accordance with the requirements of the Technical Regulations of the Customs Union TR CU 012/2011 "On the safety of equipment for operation in explosive environments".

Maximum flow, m3/h 6 Nominal flow, m3/h 4 Minimum flow, m3/h 0.04 Measurement error in the range from Qmin to 0.1 Qnom, % ± 2.0 Measurement error in the range from 0.1 Qnom to Qmax, % ± 1.0 Pressure loss at maximum flow rate, Pa ≤400 Meter sensitivity threshold, m3/h 0.008 Ambient temperature operating range, °С from -40 to +60 Maximum allowable pressure of the measured medium, kPa 5 This gas meter model "Prince" G4 is suitable for installation in two apartments or a country house. The device is designed for accurate measurement of gas consumption not more than 6 m³/h. Installation of equipment is possible both indoors and outdoors. The direction of the gas flow can be any. In addition, the device is equipped with a built-in thermal corrector.

Cast iron cauldrons of the Baraka brand are made at new factories in Uzbekistan. They have smooth edges, all cauldrons are the same in size, thickness and dimensions. There is no “lid not tight” or “does not fit” problem. All caps are of the same size and diameter, thanks to their production on CNC machines. There are complete sets with ordinary, standard white lids and there is a complete set of graphite, black lids All volumes. Sending from Krasnoyarsk.

Thermomix TM6 is a multifunctional device with a wide range of functions that can replace several kitchen appliances

Napkin is an important element of table setting. Napkin size 45x45 with a narrow hemstitch around the perimeter.

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab Brand: Dyson Type: Upright Cord Type: Corded Model: Ball MF Origin Bagged/Bagless: Bagless Features: Rotating Brushes, Telescopic Handle MPN: 208234-01 Filters: HEPA Color: Fuchsia Power: 270 AW Voltage: 60Hz 120 volts Cleaner head: Self-adjusting cleaner head In the Box 1: Combination Tool In the Box 2: Stair Tool Machine Height: 42.4in Machine Length: 15.4in Machine Width: 13.4in Maximum Reach: 51.7ft Warranty eBay: 5 Year Dyson Official UPC: 885609004518 EAN: 0885609004518

15 Pieces Set Makita 18 Volt Cordless Combo Kit  Kit includes: 18V LXT 1/2" Hammer Driver-Drill 18V LXT Impact Driver 18V LXT Recipro Saw 18V LXT 6-1/2" Circular Saw 18V LXT Brushless 4-1/2" Cut-Off/Angle Grinder 18V LXT 1/2" Impact Wrench 18V LXT 1/2" Impact Wrench 18V LXT 7/8" Rotary Hammer 18V LXT Brushless 4,000 Rpm Drywall Screwdriver 18V LXT 3/8" Angle Drill 18V LXT L.E.D. Lantern/Flashlight 18V LXT Xenon Flashlight 18V LXT Blower 18V LXT JobSite Radio     18V LXT 5-3/8" Metal Cutting Saw 4) 18V LXT Lithium-Ion 3.0Ah Battery 2) 18V LXT Lithium-Ion Rapid Optimum Charger   Manufacturer Warranty: 5-year limited warranty on tool, battery and charger

Bank Transfer / Bitcoin/USDT/Alipay accepted   🚶Provide   Delivery Only.   HOT PRICES/UNBEATABLE PRICES, HOT OFFERS/WHOLESALES PRICES FOR INDIVIDUAL.   100% Safe Delivery   100% TRADE ASSURANCE   100% On-Time Shipment Protection

Bank Transfer / Bitcoin/USDT/Alipay accepted   🚶Provide   Delivery Only.   HOT PRICES/UNBEATABLE PRICES, HOT OFFERS/WHOLESALES PRICES FOR INDIVIDUAL.   100% Safe Delivery   100% TRADE ASSURANCE   100% On-Time Shipment Protection

PRODUCT DESCRIPTION:Brand new (in original box) - never used 100% genuine / original 2 Full years international warranty Factory sealed Complete accessories (Original packaging box) Absolutely new (original manufacturer) box - no copies All Product are new original We have a very attractive action during this period. !!!

PRODUCT DESCRIPTION:Brand new (in original box) - never used 100% genuine / original 2 Full years international warranty Factory sealed Complete accessories (Original packaging box) Absolutely new (original manufacturer) box - no copies All Product are new original We have a very attractive action during this period. !!!

PRODUCT DESCRIPTION:Brand new (in original box) - never used 100% genuine / original 2 Full years international warranty Factory sealed Complete accessories (Original packaging box) Absolutely new (original manufacturer) box - no copies All Product are new original We have a very attractive action during this period. !!!

PRODUCT DESCRIPTION:Brand new (in original box) - never used 100% genuine / original 2 Full years international warranty Factory sealed Complete accessories (Original packaging box) Absolutely new (original manufacturer) box - no copies All Product are new original We have a very attractive action during this period. !!!

ASUS TUF Gaming A15 15.6" (512 GB SSDAMD Ryzen 7, 2.9 GHz, 8GB DDR4-SDRAM

Used and new household appliances , customer returns after repair . There are Lots of both working and non-working equipment

High Efficiency Chillers High efficiency air cooled scroll chillers are modular in design. The main modules are 330 and 440 kW. Up to 8 modules can be combined, the total cooling capacity can reach 3520 kW. The device can be widely used in a wide variety of buildings: hotels, hospitals and office buildings, etc.

Rethinking high performance Wide capacity range and operating range EMS maximizes comfort and energy efficiency EVI increases heating and cooling capacity under extreme conditions Configurable up to 3 units into a single system simplifies equipment installation and operation As VRF's flagship product, the V6 boasts significant advantages, such as the combined power can reach 96 HP, which is the HVAC industry leader; The EVI compressor greatly increases the heating and cooling capacity in extreme conditions, EMS understands that the evaporating temperature (when cooling) and the condensing temperature (when heating) are automatically adjusted according to the temperature both inside and outside to maximize comfort and energy efficiency. In addition, the intelligent control system enhances the value of the V6 product. Design features Wide performance range: · 13 basic modules with a capacity of 8-32 HP, outdoor units of 1-4 basic modules. System performance 8-128 HP in steps of 2 HP. The maximum number of indoor units in the system is 64. *A system of 4 base modules is available on request. New efficient compressor with EVI technology: · Thanks to EVI technology (additional refrigerant injection into the compressor), Midea V6 systems can work stably at temperatures down to -15 °C in cooling mode, up to -23 °C in heating mode. Highly efficient post-cooling heat exchanger: · In the plate heat exchanger (economizer), the refrigerant is additionally cooled. This has two positive effects. First: due to additional subcooling of the refrigerant, the energy efficiency of cooling increased by 10% in the temperature range from -15 to +43 °С. The second effect: productivity increased by 26% in heating mode at temperatures down to -15 °C. Extended piping length: In the Midea V6 system, the maximum piping length from the outdoor unit to the indoor unit reaches 200 m with a total length of all pipes of 1000 m. above). · Height difference between indoor units 30 m. · Equivalent piping length from the first branch to the outermost indoor unit 40 m (standard value). The length can be increased under certain conditions (see technical documentation). High static pressure outdoor fans: · 60 Pa pressure provides more ways to install the system. · This circumstance provides additional convenience for floor-by-floor installation of equipment on the verandas of high-rise buildings. High Energy Efficiency: · EER increased to 4.75 (in 8 HP system) thanks to full DC inverter technology, refrigerant boiling point control technology and efficient subcooling. Space and Investment Savings: · Due to the high performance base modules and the world's highest total system performance, fewer modules (systems) can be used in a number of sites. For this reason, competitors have higher capital costs and additional piping costs and, consequently, installation work. In addition, Midea V6 equipment will take up less space. EMS Variable Refrigerant Temperature Technology: · VRF Midea V6 systems manage the flow and temperature of the refrigerant at the same time, unlike systems from many other manufacturers. EMS variable refrigerant temperature technology is applied in cooling and heating mode. In the first case, the boiling temperature in the evaporator of the indoor unit is changed; in the second case, the condensation temperature is changed. If the actual heat load is lower than the rated one, the temperature may be raised in cooling (or lowered in heating). As a result, the system works more economically. In addition, in the cooling mode, the air flow from the indoor unit is warmer and does not create discomfort in the way of its distribution. The temperature change occurs automatically according to a special algorithm. The control board ensures that the compressor runs at optimum speed with the highest efficiency. Efficient outdoor unit heat exchanger: · The area of ​​the new heat exchangers is increased by 21%. The heat exchangers have a three-row G-shaped design, a new shape of the lamellas, due to which the condensation rate has increased. The heat transfer efficiency has increased by 20%. Fully DC Inverter Fan Motors: · The DC inverter motor precisely adjusts the fan speed based on the actual load and refrigerant pressure to achieve the lowest power consumption. Dual redundancy mode for outdoor units and compressors and Explicit duty cycle of outdoor units: · In multi-module combination, when one of the units stops (due to an error or malfunction), the service technician can turn on the unit in standby mode. In a system with one outdoor unit with 2 compressors, if one compressor fails, the other compressor can continue to operate for 4 days, allowing enough time to repair or replace the equipment. · The control system cyclically changes the switching sequence of the outdoor units, balancing the load on each unit and extending the service life. High performance balancing and oil return technology. Anti-corrosion protection: · The outdoor units have undergone anti-corrosion treatment that meets normal conditions. For use in special conditions, special treatment can be carried out on the steel body, grilles, heat exchanger fins, electronic control box, bolts and screws to protect against corrosive air, acid rain, sea air to increase the service life. Features and Benefits Auto addressing function: · The maximum number of indoor units in the system is 64. The control system will automatically assign an address to each unit. The wireless controller can identify and change the address of any indoor unit. Dust cleaning function: Innovative dust cleaning technology keeps performance stable. Non-polar wire connections: · Connections between outdoor and indoor units are made with a two-wire non-polar shielded PQ cable. · The system is operational regardless of the order in which the PQ-cable wires are connected to a pair of device terminals (non-critical to polarity). Silent night mode: · In this mode, the noise level can be significantly reduced. Silent night mode will be activated 6 hours after the temperature has passed the peak value during the day, and then after 10 hours it will return to normal mode. 7-Speed ​​Indoor Fan: · Choose from 7 fan speeds to fine-tune the exhaust air volume and noise level to suit people's current needs. Growth of productivity in the heating mode: · Heating productivity does not decrease to a temperature of -5 °C and makes 90% from nominal to -15 °C. Outside air operating temperature range: · The V6 system provides stable operation both in winter at -23 °C and in hot summer at 48 °C. Intelligent defrosting technology: · The time required for defrosting is calculated by software according to the current situation, which eliminates energy waste. AHUKZ-01/02/03B modules for connecting the outdoor unit to the evaporator of the central air conditioner or indoor units without EEV: Using the AHUKZ-01/02/03B modules, the outdoor unit of the Midea VRF system can be connected to the evaporator of the supply unit (central air conditioner), or to an air conditioner indoor unit without an electronic expansion valve. The connection module includes a block that combines the control and electronic expansion valve sections, a set of temperature sensors, a wired control panel and a remote display. The main purpose of the module is smooth control of the air conditioning performance and indication of operation errors on the remote display.

Steamer Sokany 2205

Price: $637 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Digital pressure module, 0.025% of full scale, 0 to 5000 psi inch, gauge, 1/4 NPT M

Price: $1,544 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. 0.035% reading accuracy Gauge, absolute and differential pressure up to 15,000 psi in. / 1000 bar / 100 MPa Enhanced Simplicity Menuless Interface Measure and mA source with external loop power or internal 24 VDC power supply. Precise Thermometer with True Ohm Technology Storage and Recall of Previously Used Screens Flexible Power Options, Including Rechargeable > The HPC40 Series is the world's first combined pressure and mA loop calibrator with full temperature compensation from -20 to 50°C. You can count on the same accuracy when measuring pressure, current, voltage, or temperature. Each unit includes P/N 2368 Test Lead Set Lead Set Red and Black Test Leads with Clamps P/N 5251 Protective Case Skydrol™ Resistant Protective Case P/N 3951 Mini-USB Cable Rugged and high-speed Micro-USB cable provides data transfer transition in the most convenient form MPM-1/4MPT CPF male to 1/4 NPT male fitting

Price: $1.573 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Value Incentive Package LIMITED TIME ONLY! Calibrator-like functions: milliamp, voltage, RTD, T/C, and frequency measurements Multimeter-like: AC/DC voltage, resistance, and continuity Digital precision with analog simplicity—speed-sensitive digital potentiometer for quick adjustments. ±0.025% typical accuracy — Accuracy to 0.02 mA, V or Hz, 1 degree C and 0.3 Ω Readings and sources Standard process signals — degrees C and F, mA, % 4 to 20, V, mV, Ohm, Hz and CPM Easy-to-Learn - Easy-to-use: simple operation without menus User-configurable Quik-Chek switch - set to any scale and zero minimum and maximum Tracking - instant recall of highest and lowest measurements Standard alkaline batteries Type AA - Long battery life with quick battery change Luxury accessories included - Carrying case with neck strap for hands-free viewing FREE 70 pcs socket set FREE Green Calibration Label Pack Save over $300! > Each unit includes six AA alkaline batteries Manufacturer's Declaration of Calibration Methods Luxury case for hands-free operation Three-year warranty Universal test lead set Shielded banana plugs and test leads Alligator clips Test probes Flat tips Operator's manual FREE Set of 70 sockets FREE calibration labels

Price: $1,539 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. The DPI 800 Series is a complete suite of advanced, reliable and easy-to-use hand tools These highly cost effective tools are ideal for testing/calibrating many popular process parameters Advanced features and technical innovations allow you to do more in less time and deliver high efficiency results, you can rely on The DPI 800 pressure indicator is the ideal instrument for measuring pressure Pressure ranges from 25 mbar to 700 bar, including vacuum options Comprehensive accuracy can be relied upon year after year, even under difficult environmental conditions Ranges from 25 mbar to 700 bar Configuration single or dual range Pressure check and maintenance Transmitter calibration Loop tuning and diagnostics Switch check

Price: $1,522 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. FREE Calibration Fitting Kit FREE C-101 Case FREE Industrial Test Lead Kit Built-in pump with media protection Helps protect the pump from fluid contamination and allows pumps to be serviced in the field Percentage error calculation for faster acceptance mA class accuracy (0.015%) for better measurement confidence and workload coverage Min/max/hold functions Capture changing measurements Test switching function for faster, more accurate test results 1, 30, 100 ohm and 300, 718 ranges for better workload coverage Nine 717 pressure ranges from 0 to 1 PSI up to 5,000 PSI 700PXX pressure modules extend measurement ranges Supported pressure units, psi inch, inches w.c. (20 °C), bar, mbar, kPa, inHg Art., mm Hg Each unit includes a FREE set of calibration fittings FREE C-101 case FREE set of industrial test leads Protective yellow case TL75 test leads and AC720 test clips User manual

Price: $1,471 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. 0 to 5000 psi in. (0 to 340 bar), (0 to 34 MPa) Compatible media: Type 316 stainless steel Displays pressure readings in any of 10 different pressure units specified in the Calibrator settings. A rugged molded urethane housing protects the module from rough handling. operation and harsh environments Internally temperature compensated from 32°F to 122°F for full accuracy Includes NIST traceable calibration certificate Module can be used with any Fluke 740, 750 or compatible 720 or 710 Series calibrator Reference grade modules have an overall accuracy of 0.015 % Module has its own serial number for independent traceability Includes a set of adapters with each module 3-year warranty Each device includes a NIST-Traceable Calibration Certificate Adapter set with each module 3-year warranty

Price: $7,823 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Capabilities Multi-functional capabilities: electrical, frequency, temperature and pressure Optional HART and Foundation Fieldbus communicators ATEX and IECEx approved for use in hazardous areas Modular concept with rerange and expandability Individual components can be used as stand-alone instruments Significantly reduces inventory Simplifies training and improves safety operator Reduces cost of ownership High resolution touchscreen display and user interface (UI) with gesture and scrolling support for a flatter menu structure and greater ease of use ATEX and IECEx, for use in zones 1 and 2 classified as hazardous. INFORMATION INTERFACE PANEL for quick launch of applications such as CALIBRATOR, HART and Foundation Fieldbus. and valve positioners. The most frequently used and user-customizable tasks can be added to FAVORITES. All components of the first generation DPI620 and the new components of the Genii system are fully interchangeable. pressure stations, pressure modules and all accessories

Price: $7,173 per unit. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. Reference dry-well, -40°C to 160°C, H insert, 220V Reference level performance for accuracy, stability, and uniformity Fast temperature measurement Dual-channel RTD and thermocouple readings and task documentation Full HART communicator Optional external temperature monitoring Support Wi-Fi and Bluetooth Color touch display Quick connectors (PC option) Reference reference control Self-calibration function Optional TPW kit for built-in auto implementation (ADT878-160 only) Built-in auto-annealing function (ADT878 -700 only)

Price: $27,702 per item. Minimum order: 1 piece Please contact us for more information about product specifications, packaging and ordering. 500 to 60,000 psi inch or 40 to 4000 bar or 4 to 400 MPa or 40 to 4000 kgf/cm2 Standard accuracy is 0.02% of reading Standard weight Series 3 material non-magnetic, austenitic, stainless steel Weight density 7.8 g/cm3 Piston material Nickel bonded tungsten carbide Cylinder material Cobalt bonded tungsten carbide Thermal expansion coefficient 11 ppm/°C Test port adapters 9/16 18 UNF (autoclave), 3/8 BSP, 1/2 BSP and 3 /4 BSP Instrument weight 66 lbs. (30 kg) Instrument base only Instrument size 18" X 13.5" X 19" (455 X 340 X 478 mm) Tank capacity 235 cu. cm (14.3 cu in) Gain 7 to 1 Seal materials Nitrile Fluid Dioctyl Sebacate (DOS), our reference 55-600