Metallurgy in bulk on Qoovee

Sandors and penstock Universal panel gates with manual and electric drives (general industrial and explosion-proof design), shandors (shield gates without a drive), are designed to overlap trays, openings in chambers, to shut off sedimentation tanks in emergency situations, as well as in case of repairs ... Can be used in any sewerage facilities (primary and secondary radial sedimentation tanks, grid buildings, pumping stations, digester tanks, etc.), water supply, drainage and irrigation systems, etc. At present, the production of any standard sizes of panel gates has been mastered, as well as modifications of `` ХТ '' & mdash; resistant to aggressive media (sea water, treatment facilities, channels of metallurgical and chemical plants, mine waters), made of stainless steel, ethylene-propylene rubber, bronze, etc. The plant is constantly working on the modernization of the design of the valves, the use of progressive materials in the direction of reducing material consumption and improving technical characteristics. The design of the shield seal has been developed, allowing its use in places with reversible fluid flows, the wedge lock method has been improved for greater tightness, the installation scheme has been tested without the use of concrete and improvements. Taking into account the wishes of the designers, emergency opening gates, bypass gates, gates with a semicircular threshold have been introduced into serial production. Simplicity of design, installation, durability, low prices, minimum production time, guarantees of uninterrupted operation have made it possible to successfully use panel gates of LLC `` Molot-Mechanics Plant '' at various structures in Ukraine, CIS countries and far abroad.

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in wholesale supplies. Clamp-and-slide system. It allows you to assemble the glass by sliding them to the side at the installation site, thus saving space in the interior and providing a larger area of ​​use. In tight spaces, the installation provides the opportunity for more efficient use of space. It does not interfere with the exit, thanks to the aluminum wicks, which are clamped at the points of glass connection, reduces the coefficient of glass stretch to zero, does not let water, wind and dust inside. The clamp-sliding series with a threshold and without a threshold for 2, 3 4 5 tracks makes it possible to open by sliding to the right and left from 2 to 10 glasses. Simplicity of manufacture and assembly is achieved due to the guide cover at the connection points of the vertical profiles. It is used for winter gardens, glass windows and various types of balconies by connecting 2 or more L, U-shaped and straight (90 ° -270 °) panels. The system can use heat-saving glass units 8 and 10 mm and 4 + 12 + 4 Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products at the warehouse in Turkey c) Bank guarantee (the decision to release the products under the bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time. For more information on the different Alkon product lines and quote quotations

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in wholesale deliveries Showcase system Designed specifically for shopping centers, shops, cafes, fast food zones, summer cottages, pastry shops, parking lots, swimming pools, etc. Windows can be opened in the desired direction with a single roller. The panels in the system can slide in both directions. The system is suspended and moves on the top frame and aluminum tracks. Saves space and provides 85% protection against wind, rain, dust and inclement weather. The system uses 10 mm tempered glass Weight of the system glass: 25-28 kg / m2 Maximum system height: 380 cm Thermal insulation: 70% Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash - prepayment after the buyer checks the products at a warehouse in Turkey c) Bank guarantee (the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time. For more information on the different Alkon product lines and quote quotations

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. Since 2015, we have been engaged in the wholesale supply of the Prokon Series made of shaped aluminum. The frame profile is designed as double track to accommodate double bearings. The bases of the Procon system are compatible with 8 mm tempered glass. The system is available in standard colors: anodized (natural), white, bright bronze (215 different color options). In this system, the installation can be done both from the top and from the bottom. The Alcon Procon system has 5 important features: 1. Glass balcony with gutter 2. Glass balcony with steam channel 3. Glass balcony with child lock 4. Glass balcony with aluminum seal 5. Glass balcony with double track. Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products in a warehouse in Turkey c) Bank guarantee ( the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time.

Direct deliveries of profile balcony systems from a manufacturer in Turkey ATU Export & Consulting LLC is our company in Turkey. We have been wholesalers since 2015. Isykon's cold-resistant series of profiled aluminum with insulating glass units has been designed with 50% better heat savings compared to 8mm glazed balconies. The insulating glass units used in our Isykon balcony system are 30 mm (4 + 22 + 4). The system is compatible with straight, L, U-shaped and all kinds of corner balconies. Minimum shipment volume: 1 container Terms of delivery: EXW, FOB, CFR, CPT, CIF Terms of payment: a) 30% + 70% after inspection by an accredited surveyor b) cash settlement - prepayment after the buyer checks the products in a warehouse in Turkey c) Bank guarantee ( the decision to release products under a bank guarantee is taken individually) Working with ATU Export & Consulting LLC: 1. Direct deliveries from Turkey; 2. Strict quality control of products at each load (presence of a qualified expert representative); 3. Availability of international certificates and product declarations; 4. Compliance with manufacturing technology; 5. Compliance with the terms of the contract and delivery time.

Toggle latch is a mechanical piece of hardware which in locked position ensure secure fastening of two surfaces, panels or objects and when unlocked allow separation. The main components are the base plate with lever and attached loop and separate part the catch plate.  It is  widely used in automobiles, ships, bullet trains, aerospace, medical equipment, nuclear power plants and various industrial and civil equipment.

Bentonite clay powder PBB, PBG, PBMB

- Loop resist pulling strength up to more than 160lbs; - Sizes 1inch, 1.25inch available for options; - Loop rotatable; - Assemble with alloy screw nut; plastic type (avoid scratch) available for options; - Electrophoresis black finish; - Economic type, bulk ship from $0.59~$0.53/pc; - Low MOQ limitation (50pcs), wholesale and retail are both welcome; - Laser logo service available, only with extra $0.05/pc; - Regarding packing method: 1>bulk pack; 2>every two pieces per plastic bag with seal and outside stick item label for wholesaler; 3>every two pieces per clam shell and printed header card for retailer.

The Bobcat Miner 300 is the hottest hotspot miner on the market for cryptocurrency mining! The Bobcat Miner 300 is not only the hottest miner on the market but it is also THE best! Both of these are unopened and are only a plug-in away from earning you crypto! Using the same amount of energy as an Led light, the Bobcat Miner is extremely efficient! THESE MINERS ARE IN HAND AND READY TO SHIP.

NPK METAL EXPO LLC with full corporate and legal responsibility declares that we can and are ready to offer materials produced by our company based on the ISO 9001-2015 (ISO9001-02015) standard No. ROSS RU.TSSH00.K01109 dated 05.15.2018 with the following characteristics: Product: Ultrafine Zinc Powder Chemical purity: not less than 99.99% of the total amount of controlled impurities. Quantity: 15,000 kilograms per month. Certification: JSC "GIREDMET" (ROSATOM, Russia) Product: COPPER BARS Chemical purity: 99.9999% of the total amount of controlled impurities Amount: 8000 kilograms per month. Certification: OJSC "GIREDMET" (ROSATOM, Russia) Product: Ultrafine Copper Powder Chemical purity: 99.999% of the total amount of controlled impurities Amount: 20,000 kilograms per month Certification: OJSC "GIREDMET" (ROSATOM. Russia) Russia) Product: Stable Tungsten Isotope 184 Chemical purity: 99.99% Isotopic purity: 95% Quantity: 5000 grams per month c.Certification: JSC "GIREDMET" (ROSATOM. Russia) Product: Metallic cesium (133Cs) Chemical purity: 99.9% Quantity in Moscow: 50,000 grams per month Certification: GIREDMET OJSC (ROSATOM Russia) Product: Nickel wire DKRNT -0.025 CT Chemical purity: 99.92 % Amount in Moscow: 18,163 grams. (Lots 9,977 gr., 8085 gr.) Certification: JSC "GIREDMET" (ROSATOM. Russia) Product: Technical alloy Gold / Tungsten Chemical purity: Gold: not less than 83%, Tungsten: not less than 17% Amount: up to 150,000 grams per month. Certification: JSC "GIREDMET" (ROSATOM. Russia) Product: Aluminum ingots Chemical purity: not less than 99.9995 - 99.9999% for the specified impurities. Amount: 7000 kilograms per month. Certification: JSC "GIREDMET" (ROSATOM. Russia) The terms of delivery and payment are stipulated in the agreement or agreement between the Buyer and the Seller or interested companies. This company is engaged in the supply of non-ferrous metal in the Russian Federation and also carries out export supplies. Our product is not laboratory samples and we can offer some quantity and discuss cooperation. The product is of the highest quality and is probably the best or one of the best, perhaps the only one "in such a proposal, in the world in terms of chemical purity and physical characteristics.

Transformer substations KTP-pole, mast, kiosk, heat-insulated we will manufacture according to the completed questionnaires and a linear diagram. To calculate the cost, you need a completed questionnaire and a linear diagram to our e-mail.

We carry out work on diagnostics, repair, assembly, full or partial installation, commissioning of control cabinets, telecommunication cabinets, server cabinets, electrical and electrical cabinets, etc. Installation work can be carried out both in accordance with the documentation developed by the manufacturer, and in accordance with the project documentation provided by the customer. We have many years of experience in using equipment from Rittal, DKS, Provento, Phoenix Contact, Weidmuller, Wago, Legrand, Schneider Electric, Lappkabel, Schroff, etc. All installed equipment is factory tested (technological run at least 72 hours). Experts will assist in calculating the equipment configuration based on the customer's technical specifications. Execution of works on APCS (development of RD, supply of control and management cabinets, SCADA, software, MO, AWP; installation; commissioning) on ​​a turnkey basis Execution of work on APCS (development of RD, supply of control and control cabinets, SCADA, software, MO, AWP; installation; commissioning) turnkey. We provide services for the assembly and integrated supply of instrumentation equipment and installation materials. We offer our Customers: Consultations, selection of the necessary equipment according to the Customer's specifications, services for alternative replacement of equipment, direct delivery of devices from the warehouse and on order.

The cutters are designed to equip chain soil cutters, to equip chain executive bodies of combines, barless cutting chains of coal harvesters, drilling machines.

Own production of scraper chains for roadheaders Ksp-32, 1Pnb2 type 2pnb2, 1GPKS, Kp-21, ksp-35, 1p110 , 2п110

C*O*N*T*A*C*T *W*H*A*T*S*A*P*P +*1(7*0*7)5*9*5-7*2*8*3

Stainless steel cable mesh is light, robust, and transparent. High-quality stainless steel cables and pressed ferrules are used for the production of the mesh and connected to a load-bearing and flexible structure. The curvature in the opposite direction of the stainless steel cables creates the exceptionally robust characteristics of the mesh can even stand up to heavy loads.

ST slide table is designed with lead screw and hand wheel tansmission to set require positions. Feature: 1. High tensile cast iron normalized and stress relieved 2.Parallelism : within 0.02mm/100mm

CHH Cross hydraulic slide table is designed with hydraulic cylinder and fluid valve controller for feeding control. Feature: 1. High tensile cast iron normalized and stress relieved 2.Automated driven by hydraulic power pack 3.Optional telescopic covers 4.Parallelism : within 0.01mm/100mm

VSS Vertical slide unit is designed with hardness guideway and standard ball screw class C7 which are incorporated with a servo motor for spindle feeding. Feature: 1.Turcite is included to reduce friction 2.Capable to mount with your prefer brand servo motor 3.Ball screw class C5 or C3 is available upon request 4.Servo motor stand / coupling / telescopic included 5.DELTA servo motor is available 6.Optional telescopic covers 7.Perpendicularity : within 0.01mm/100mm

RH150 slide unit is designed with linear rails and precision class ball screw which are incorporated a servo motor. RH150 linear guide slide is guided by rolling element blocks, either ball or cylindrical rollers. These rollers allow the slide to operate with zero friction, move rapidly and creating less heat. The advantages of linear motion slide are smooth, fast and extremely accurate positioning performance due to low friction. Feature: 1. Capable to mount with your prefer brand servo motor 2.Ball screw class C5 or C3 is available upon request 3. Ball or cylindrical rollers is available for linear blocks 4. Servo motor stand / coupling / telescopic included 5. DELTA servo motor is available 6.Parallelism : within 0.01mm/100mm

BS150 hardened way is a linear motion slide that incorporates precision and ground rectangular way guides. This generates more friction and decreases speed, but tremendously increases durability. It is used when accuracy, dampening and rigidity are required while machining. The surface of rectangular way guides and shim are grinded and scrapped, the contact surface of saddle are glued with turcite which reduces the friction. Shim is required to be adjusted and aligned when backlash is generated for the contact surface. Feature: 1. Turcite is included to reduce friction 2. Shim is included to precisely align, level, and adjust spacing for sliding parallelism. 3. Capable to mount with your prefer brand servo motor 4. Ball screw class C5 or C3 is available upon request 5. Servo motor stand / coupling / telescopic included 6.DELTA servo motor is available 7.Parallelism : within 0.01mm/100mm

S60-FA408 facing head slider transmission is designed with linear rails and a ball screw grade C5 which are incorporated with a servo motor. The roundness of spindle nose is within 0.002mm and repeatability of facing head slider is within 0.01mm. This unit is capable for processing like inner (ID) and outer (OD) turning, grooving, conical boring, conical threading, concave/convex rounding and other spherical machining. Feature: 1.Facing slide stroke 8mm 2.Facing slider repeatability within 0.005mm 3.Standard 3-phase AC motor 2.2kW is included, optional maximum power up to 3.7kW 4.Belt driven at fixed speed and incorporate a timing belt 5. Available for servo driven at variable speeds 6. AC Induction Motor protection IP 54

S25 spindle housing itself is an FC30 casting, which further underwent precision boring and honing, and the material for spindle are alloy steels subjected to high frequency heat treatment. They are assembled with SKF Germany, NSK Japan and Taiwan TPI precision bearings which maintaining the spindle nose accuracy 0.002mm or less. Its maximum capacity RPM 12000 is suitable to mount on a CNC servo slide or hydraulic feed table for your machining applications. Feature: 1.Standard 3-phase AC motor 0.18kW is included, optional maximum power up to 0.37kW 2.Belt driven at fixed speed and incorporate a timing or Poly-V belt 3.Spindle taper ER20 is available 4.Available for servo driven at variable speeds 5.AC Induction Motor protection IP 54 6.Gearbox motor is available upon request

ST1N tapping spindle unit is designed with lead screw transmission and supported automatic thread cutting and float tap chuck. The maximum tapping capacity is M12 (S45C). Feature: 1.Standard 3-phase AC motor 0.75kW is included, optional maximum power up to 1.5kW 2.Belt driven at fixed speed and incorporate a timing or V belt 3.Spindle taper ER20, JT6, MT2 and AS22 are available 4.Available for servo driven at variable speeds 5.OMRON proximity switch sensors and stand are furnished 6.AC Induction Motor protection IP 54 7. Gearbox motor is available upon request

Polypropylene plumbing fittings.

Kindly message me for more details,

The Center for Confirmation of Conformity "Basis-Expert" provides services for confirming the conformity of products, will help to certify imported and domestic products in accordance with the requirements of the Technical Regulations of the Customs Union, which is necessary for import and sale in the territory of the Eurasian Economic Union and will help to pass all laboratory tests in accredited laboratories of the EAEU.

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Ricoh G5S (MH5220) UV Printhead - J35000Manufacture: Ricoh

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Toshiba CE4W1 PrintheadUnique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot.Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface.Printer Compatibility: TOSHIBA PrinterRemarks: Original

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   KONICA 1024i MHE-D PrintheadTo be used with: Flora PP3200 UVRemarks: OriginalIt is compatible with water based ink and uv ink

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Roland BN-20 / XR-640 / SOLJET PRO4 XF-640 printhead (DX7) -6701409010To be used with: Roland BN-20 / FH-740 / RA-640 / RE-640 / RF-640 / VS-300 / VS-300i / VS-420 / VS-540 / VS-540i / VS-640 / VS-640i/ XF-640 / XR-640Remarks: OriginalPart no.: 6701409010

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   This GS-508 (12 picoliters) print head is suitable for Vutek GS printers. This is the original Vutek print head. This product carries a manufacturer warranty. Manufacturer: VutekPrinter compatibility: Vutek GS2000 / GS3200 / GS5000DP part number : PPHSE5082

Purchase products at Harisefendi provide a 100% money back guarantee and 100% safe. Harisefendi take your privacy very seriously and carefully protect any and all information entrusted to us. We only collect information that helps us serve you better. Harisefendi do not share your information with anyone else unless you've approved of such sharing in advance.   Mimaki TS500-1800 Gen5 printhead Assy Type-D - M014140This printhead is suitable for Mimaki TS500-1800 & TX500-1800 series printers.Printer Compatibility:  Mimaki TS500-1800 / TX500-1800B / TX500-1800DSPart No.: M014140Remarks: Original Specifications: Model PRH-MIM-006 Head materials  SST, Nickel alloy, Epoxy Adhesive Number of nozzles  Four 320 nozzles Nozzle spacing  0.1693 mm Nozzle density  up to 600 npi Nozzle plate surface  Coated SST Piezo type  D33 Stacked PZT Native drop volume  7 pl Drop volume range  7 - 35 pl Drop velocity  7 m/s Jetting frequency  Up to 60 kHZ Temperature control  Integrated Heater and Thermistor Operator temperature range  Up to 80° C Life  100 billion actuations per nozzle Dimensions  89 x 25 x 69 mm (not include cables)

Product SpercificationCaluanie Muelear Oxidize ( Crude Caluanie 99% is generated from Muelear oxidize), Caluanie (Oxidative Partarization Thermostat, Heavy Water)This product is used for crushing and processing precious metals and semi precious stones. It is used for processing precious and semiprecious stones, crushing metals in the chemical industry.We do worldwide  deliveries and supply our product to various regions around the globeCambodia,Vietnam,Thailand ,Uzbekistan,Krygystan, China , Laos, UAE, Paraguay, Oman, Latvia, kazakhstan, India, Europe,RussiaAvailable Packaging: 1L,2L,5L & bulk packaging as from 20L, 50L, 100L or as per buyer’s request.

Designed for use both in warehouses and industries, and in small spaces - garages, retail outlets, storerooms. The rack consists of vertical racks (frame) and horizontal beams fixed to them with stacked shelves (tier). Rack with 5 shelves (tiers) included. External size, taking into account racks and beams (HxWxD) —2500x3765x850mm Load on a tier - up to 450 kg, Load on a rack of 2 sections - up to 4500 kg. Robust and stable construction. Stand (frame) - galvanized steel, profile 55x47 mm. The beam is attached to the rack on hooks, with additional fixation against accidental lifting. The pitch of the holes for fixing the beams is 50 mm. Stacked shelves - galvanized steel (600x300 mm). The rack is delivered unassembled. Anchors are not included. Manufacturer: Russia. Warranty: 12 months.

4N5614 Caterpillar ROCKER ARM

IN120D - Burgmann BT-RN3 NU (DIN24960)  analogue of Burgmann BT-RN3 NU (DIN24960) IN120D - Burgmann BT-RN3 NU (DIN24960)  analogue Burgmann BT-RN3 NU (DIN24960)

mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16 mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16 mechanical seal type IN16 analogue of John crane 16, burgmann BT-PNT, Flowserve Pac-seal 16, sealol 16

mechanical seal type IN301 analogue of burgmann BT-AR, john crane pr / dr, vulcan 18, sterling bt, flowserve pac-seal 118, aesseal b01, roten 37b / l5, latty t750

mechanical seal type IN109 analogue Burgmann type MG1 MG12 MG13, Roten L3, L3K, L3N, Vuckan 19, 192, 193 Anga A1, Aesseal B02, B012, BP02, Flowserve Pac-Seal 190, 192, 193