Open chat

All Vehicles & parts suppliers from Russia

USD 2.5/pcs 2.5
Hanks from 60m to 200m. The total volume is 3000 meters. Used rubber-cable tape width 1700mm thickness 22mm.24mm
Агротехника+
Юрга, Russia
USD 1342.01/pcs 1342.01
Tedder rake, roller, for raking grass into swaths, 9 wheels, working width 6 m, middle wheel for additional swelling of the swath, to prevent sticking and debate. Complete with pins (on impellers): 6 mm, or 7 mm 1. Impellers and transport wheels on cast hubs with double-row bearings. 2. Specially heat-treated spring steel paired teeth on the impellers ensure long-term operation, and the special geometry of the teeth allows torsion in two planes without breakage even when stones are hit. The spring pins are certified. 3. The main mechanisms of the rake - the frame and the drawbar - are made of special square pipes, which give the whole structure special strength. 4. The hydraulic cylinder c 80.40.400 is a 4-fold power reserve. 5. Convenience and speed of transferring the rake working sections from the working position to the transport position and vice versa; the complexity of the transfer from the "raking" operation to the "tedding" operation and vice versa has been reduced. 6. High-quality performance of all operations: raking and tedding of hay, wrapping rolls, as well as doubling rolls with their linear density up to 2 kg / rm. m. and higher quality in comparison with GVV-6.0 performance of the "tedding" operation (the furredness of plants after tedding was 55% - according to the requirements of agricultural production, not less than 30%); 7. The wheel rim is not rigidly connected to the hub disc; 8. The vertical arrangement of the impellers makes it easy to adapt to any ground contours. 9. Transfer from the transport position to the working position and back is carried out using the hydraulic unit from the driver's cab; 10. Convenience of transportation on public roads: high maneuverability in transport position; Rakes - tedders GVV-6.1 swaths are designed for raking dried grass from swaths into swaths, tedding it in swaths and wrapping swaths. The rake is used for harvesting sown grasses, as well as grasses of natural hayfields with a yield of more than 10 c / ha on the plains with a mass moisture of 25 to 80%. Provides high quality collection of grass (including alfalfa) in a loose, non-twisted swath. The rake is aggregated with wheeled tractors of 0.6 - 1.4 t class. The drive of the working bodies (impellers) is carried out due to their adhesion to the soil. Main units: section left and right with a set of impellers; coupling; beam; section lifting mechanism. The left and right sections are similar in structure. Each section consists of a bar, two attachments and four impellers, in the center of the frame there is an additional attachment with one wheel, also raised by a hydraulic cylinder. Technical specifications. GVV-6,1 grade Type Wheeled-finger trailed Coverage, m 6.0 The highest productivity per hour of clean work, ha / h 8.62 Working speed, km / h, no more than 12 Transport speed, km / h, no more than 20 Weight, kg, no more than 400 Overall dimensions of two sections in the assembly, mm, no more when raking: length 4900 width 8000 height 1400 when tedding: length 4900 width 9400 height 1400 in transport position: length 5000 width 2400 height 3500 Track width in transport position, mm, no more than 2000 Number of sections, pcs 2 The total number of impellers on the machine, pcs. nine Drive of the impellers Due to the adhesion of the spring tines to the soil It is aggregated with tractors MTZ-50 (52), MTZ-80 (82), YuMZ-6, T-40, T-30, T-25A
Агротехника+
Юрга, Russia
USD 2272.19/pcs 2272.19
We produce the KRN-2.1 tractor mower of the following modifications and a whole set of spare parts for it: Rotary mounted mower KRN 2.1: price 140-148 thousand rubles.Rotary road mower KRN 2.1D: price 162 thousand rubles. Appointment KRN-2.1The mounted mower is designed for mowing sown and natural grasses in a unit with an MTZ type tractor (classes 0.9 and 1.4) at high forward speeds with laying the mowed mass into a swath. The KRN-2.1 mower is hung from the rear on the rods of the hinged system of the tractor. The mower blade has four working rotors, to which two blade knives are hinged each, which cut the grass. The rotors rotate in pairs towards each other. The mower is driven from the PTO of the tractor power take-off through the cardan shaft, overrunning clutch, V-belt transmission, reducer and rotor gears. Idling of rotors and gear mechanisms at the moment of disengagement of the tractor PTO shaft is provided by an overrunning clutch. KRN 2.1 mower device The separation of the cut mass from the non-cut grass stand is carried out by a field divider. The transfer of the mower to the transport position is provided by the hydraulic system and the installation of the transport link in the working position, in which it rigidly fixes the mower blade raised at an angle. The mower is serviced by a tractor driver The KRN-2,1 mower has the following technical characteristics:Characteristics Mower KRN-2,1Characteristics of working bodies4 rotors with two bevelling knivesCoverage, m 2.1Weight without spare parts and packaging, no more, kg 510 +/- 16Rotor speed, rpm 1980 ... 2060Overall dimensions, mm:working position:- length, mm 3550 + 35- width, mm 2085 + 20- height, mm 1380 + 15transport position:- length, mm 4910 + 50- width, mm 2350 + 25- height, mm 2665 + 25Drive from tractor PTOThe number of revolutions of the tractor PTO shaft, rpm 540Cutting height of plants, on sown grasses, mm 6 +/- 2Number of service personnel, persons 1 tractor driverWorking speed, no more, km / h 15Transport speed, no more, km / h 30Tractor track width, mm 1400 ... 1800Transport clearance, not less, mm 280 Documents for the mower KRN 2.1:Certificate of conformity for the KRN-2.1 mower from 05/21/2019Test report for the KRN-2.1 mower from 05/21/2019Catalog of parts and assembly units for the KRN 2.1 mower
USD 497.04/pcs 497.04
Self-adhesive label applicator Lm (labeler, labeling machine, labeling machine, labeling machine) for cylindrical containers, manual. Robust steel construction. Universal device for applying self-adhesive labels.
USD 96260.36 - 98579.88/pcs
"Model 850 mini Product Street cleaning Type of cleaning Sweep KUBOTA engine IIIA emissions Maximum diesel power 25 kW Power plant Diesel Sweeping width 1500-1850 mm Waste bin capacity 0.8 - (1 Opt) l Water tank 200 l Unloading hopper to a height of 1425 mm L x W x H 3400 x 1100 x 2070 mm Weight 1850 kg Dulevo is the world's leading manufacturer of a wide range of industrial sweepers and other street cleaning equipment. and high productivity.It is effectively used in areas inaccessible to conventional sweepers, such as walkways, stops, sidewalks, parking lots. thanks to the central hinge system, it can work even on uneven surface and move at a 25-degree tilt. The sweeping width of the machine is 1600 mm. The machine has a capacious high hopper with a garbage compaction system (to increase the capacity). During operation, rotating brushes (main and additional) sweep dirt and dust into the hopper, where it is sucked in by a powerful turbine and filtered clean air comes out through the dust filter. Garbage from the hopper can be dumped into a container or dump truck. The Dulevo 850 mini sweeper has an additional leaf suction function. This model meets all international standards and safety requirements, it has increased noise insulation, an almost silent motor and strict control of exhaust gases and noise. The Dulevo 850 mini combines high performance with a small compact size and ease of operation and maintenance. This model does not differ in the working conditions of the operator. The machine has an ergonomic operator's cab with easy entry and easy operation. The operator has easy access to any part of the engine, which facilitates maintenance. In addition to the standard Dulevo 850 mini, you can purchase additional accessories. In our company, the Dulevo 850 mini exhaust sweeper is always available. You can buy this model from us, rent it and purchase the necessary spare parts for it. We offer an obligatory guarantee and high-quality service for all equipment. We deliver special machinery and equipment to all regions of Russia. "
"Asian Silk Way"
Москва, Russia
USD 1000.0 - 45000.0/pcs
Мир автошторок
Кострома, Russia
USD 1100.0 - 4000.0/pcs
OPTOMDV
Хабаровск, Russia
USD 1.7/pcs 1.7
OPTOMDV
Хабаровск, Russia
USD 1.66/pcs 1.66
Oil-Grupp
Санкт-Петербург, Russia
USD 383.43 - 1065.09/pcs
OPTOMDV
Хабаровск, Russia
USD 107.3/pcs 107.3
Лаконичный стильный коврик из резины с отличными антискользящими свойствами! Легко размещается на панели приборов вашего автомобиля. На него можно положить телефон, очки и любые другие небольшие предметы и они будут лежать именно там, где вы их положили. Удобный и практичный аксессуар для вашего автомобиля. Размеры коврика: 18х13 см.
"Asian Silk Way"
Москва, Russia
Specify the price USD
Wholesale deliveries of bicycles from China. Various options for bicycles, any options for discs, colors, characteristics. We work directly from manufacturers! Big choice! High quality!
"Asian Silk Way"
Москва, Russia
USD 710.06 - 4260.36/pcs
Wholesale deliveries of karts directly from the manufacturer. There are various models - gasoline, electric. Possibility of customization! All karts are new! Not used! Customizable characteristics, additionally variable battery capacity, color, additional protection. Minimum purchase of 3 pcs.
KoolBike
Екатеринбург, Russia
USD 198.82/pcs 198.82
HUGO-S3   Электросамокат Hugo s3 Максимальная скорость 35км/ч Диаметр колес 200мм
KoolBike
Екатеринбург, Russia
USD 184.62/pcs 184.62
Цвет: Черный Рама: 17 Количество скоростей: 21
KoolBike
Екатеринбург, Russia
USD 170.41/pcs 170.41
Цвет: Green Рама на рост 150-190 см. Максимальная нагрузка: 110 кг Диски: сплав алюминия и магния Кол-во скоростей: 21(3*7) SHIMANO Япония Вес велосипеда: 15 кг. Тормоза: дисковые, механические 160 мм SHIMANO Япония  Диаметр колеса: 26 (Покрышка: 26*1,95) Вилка: XCM Santour, ход 100 мм Передний и задний амортизатор
KoolBike
Екатеринбург, Russia
USD 156.21/pcs 156.21
KoolBike
Екатеринбург, Russia
USD 170.41/pcs 170.41
G2R
Russia
USD 1970.0/pcs 1970.0
We offer a gas reducer! Profitable! Used for a gas generator, walk-behind tractor or motor pump. It is stationary, the operator decides what type of fuel to use: gasoline, main gas (methane), propane or eco-gas. To switch the gas generator, walk-behind tractor or motor pump to the selected type of fuel, just turn the lever. The biggest advantage of the gearbox is the economy. Gas is much cheaper than gasoline, which allows reducing fuel costs by up to 50% - if it is propane and up to 90% - if it is methane, when using biogas - up to 100%. Another important advantage of a gearbox for a gas generator, walk-behind tractor or motor pump is environmental friendliness. Price: 1970 rubles - reducer 290 rubles - repair kit The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

Qoovee is a platform for B2B trade and business services. Here you can discover products in any industry, including the Vehicles & parts. There are wide range of wholesale products you need on Qoovee. You can find Vehicles & parts in bulk from China, UAE, Kyrgyzstan, Kazakhstan, Russia, Ukraine, Turkey, Europe, Africa, Latin America and other different countries. The up to date supplier directory is constantly being expanded: now on Qoovee there are more than 20 000 suppliers from 80 countries. All product suppliers, who represent more than 600 product categories, are waiting for you to cooperate with!

Write to us, we are online!