All Woodworking Machinery suppliers from Ukraine

Electric wood splitter Artmash 380 V is a rack and pinion model of an electromechanical splitter, adapted for connection to a three-phase network. Such a wood chopping machine is optimal for utilities and enterprises using solid fuel boilers. You will like the electric wood splitter Artmash 380 V, because it: completely safe to use. The manufacturer received a European СЄ certificate for a firewood preparation machine; stabs quickly, the split cycle is only 1.5 seconds. 20 cubic meters of firewood per shift is the usual norm for this unit; serves for a long time and without breakdowns. The design is well thought out, the parts subject to wear are made of stainless steel 18KhGT, are hardened and cemented. The splitting knife itself retains its properties throughout the life of the machine, the gear rack requires only periodic recovery. Thermal protection is installed on the motor; copes not only with birch logs, but also with knotty oak. All this thanks to a force of 12 tons and a friction clutch protecting the engine. To overcome a hard knot, it is enough just to make two hits; consumes a minimum of energy or fuel, since the impact force is provided not by the efforts of the motor, but by the inertia of the heavy flywheels; Suitable for splitting firewood with a diameter and length of up to 500 mm. At the same time, even when loading such heavy chocks, a good stability of the machine is ensured. The guaranteed service life of the electric wood splitter Artmash 380 V is 12 months. At the end of this period, you can always contact the manufacturer if you need to consult or replace consumables.

LLC Artmash is a manufacturer of lines for the production of pellets from waste wood processing industries for Ukraine and 20 other countries. At the request of the client, we can offer equipment of different capacities, we provide the most reliable information about the possibility of granulation of a particular raw material as well as possible performance. The standard line includes: Accurate loading auger 380V, 1.1 kW, 1500 rpm. Granulator 380V, 22 kW, 1500 rpm. Pellet cooler with vibrating table 380V, 5.5 kW, Before painting and selling all our equipment is tested for defects and their subsequent elimination. All nodes are made in-house with an inspection of quality control. Parts that are subjected to heavy loads are made of alloy steels with subsequent heat treatment. Contact us and we will help you choose the equipment of the necessary power and performance. Video with reviews of our customers The main advantages of our equipment: the matrix (die) is made of steel 20X with subsequent cementation in a thermal furnace. The hardness of the surface layer of the metal and the walls of the hole 62 HRC (bearing hardness) is achieved, which provides wear resistance for years of operation of the granulator; rollers are made in the same way as the matrix; the mechanism used involute helical gear transmission. Compared to spur gears, helical gear achieves a significantly lower noise level of the product as well as greater transmission durability; low power consumption. The matrix in diameter of 160 mm can work with 4 kW engines. 380 V and 4 kW, 220 V; in order to avoid engine overload, we have provided a thermal relay, which will timely turn off the engine in case of overheating; each granulator is tested for defects and repaired before painting and selling. Worm Gear Precision Auger Features Voltage: 380 V; Engine power: 1.1 kW, 1500 rpm; Productivity: up to 300 kg / h; Hopper volume: 0.6 cubic meters; Granulator weight: 140 kg; Dimensions: D2800 * W750 * H1600 mm. Characteristics of the pellet mill for pellets 380 V, 22 kW Voltage: 380 V; Engine power: 22 kW, 1500 rpm; Productivity: 400-800 kg / h; Granule diameter: 2-8 mm. The diameter of the matrix: 280 mm; Granulator weight: 400 kg; Dimensions: D1300 * W500 * H1300 mm. Pellet Cooler Characteristics Voltage: 380 V; Engine power: 4.5 kW, 3000 rpm; Productivity: up to 1000 kg / hour; Hopper loading volume: 1 cubic meter; Granule diameter: 2-6 mm. Diameter of the matrix: 160 mm; Granulator weight: 550 kg; Dimensions: D4000 * W1100 * H2500 mm.

The Artmash plant offers a straw, hay, bulrush and other grass shredder with a capacity of 18.5 kW. The 18.5 kW industrial straw chopper is equipped with a cyclone for dust screening and a table for convenient bale feeding. CHARACTERISTICS OF THE INDUSTRIAL GRINDER Voltage: 380 V Engine power: 18.5 kW, 1500 rpm Productivity: 1000 kg / hour Mesh Diameter: 4.6.8mm Weight: 250 kg Dimensions: 1450 * 1000 * 1050 mm IMPORTANT + All units are made of quality steel. + The chopper rotor is equipped with John Deere branded knives made in the USA. + Each product is tested by quality control. + Warranty for equipment - 12 months. Video work: