Notifications

  • Qoovee icon No notifications

Antiseptic Building Universal - 63111

Supplier:
LLC ALTERKHIM-PRO
Available
USD 3.24 3.24 USD

Minimum order: 12 pcs

Supply ability: 1000 pcs/per day

Not approved icon The supplier is not verified
Qoovee icon Close the deal safe & guaranteed

Purpose: Designed to destroy and prevent the formation of mold, fungi, mosses, lichens on mineral materials (stone, concrete, gypsum, plaster, ceramic tiles, gypsum plasterboards, etc.) and wood (plywood, fiberboard, chipboard, etc.) .). Recommended for processing facades and basements of buildings, fences, rooms with high humidity (basements, cellars, kitchens, bathrooms, greenhouses). It can be added to unmodified plaster, masonry mortars, putty as a biocidal additive instead of mixing water. The tool perfectly sanitizes the surfaces of walls, brickwork, ceilings, interpanel seams. Has a long-lasting effect.

 

Benefits:

long-term protection up to 15 years;

effectively protects against biological damage and insects;

environmentally friendly, does not contain solvents;

does not damage or stain the treated surfaces.

as a biocidal additive instead of mixing water.

 

Mode of application:

The product must be diluted with water.

Apply an antiseptic with a brush, roller, spray 2-3 times after each previous layer has dried. When treating an already affected surface, apply an antiseptic, after 24 hours clean the surface and repeat the treatment. When processing mineral surfaces directly exposed to water, cover it after drying with a water repellent GKZH-11 or waterproof paints and varnishes. Average consumption 100-150 g / sq. m on mineral grounds and 200-300 gr./sq. m for wood. When used as a biocidal additive in mortar mixtures, test with a small amount for compatibility.

Water-borne paint: add 250 ml of paint to 20 liters of paint and mix thoroughly.

Additive to plaster: 250 ml of the product is enough for 10 liters of water. Grout or plaster is mixed on the resulting solution.

Grout: 50 ml is added to the mixing water per 5 kg of dry mass.

Additive to wallpaper glue: add about 25-30 ml of active agent per 1 liter of water to the glue mixing liquid, then prepare the glue according to the instructions.

Precautions: When working, use protective equipment for skin, eyes and respiratory organs (rubber gloves, overalls, glasses, respirator). In case of contact with skin, mucous membranes, eyes, rinse immediately with plenty of running water for 10-15 minutes. Seek medical attention if necessary.

Danger: Possible irritant effect on the skin.

Storage and transportation: Transport and store at temperatures from + 5 ° C to + 40 ° C, in a hermetically sealed original container, separately from food, in a cool ventilated room, out of the reach of children and animals. Avoid heating and direct sunlight. The composition retains its properties after short-term freezing. Dispose of in accordance with SanPin 2.1.7.1322-03
Shelf life: 36 months

You might like

Contact supplier
Supplier:
"Узлегпром"
Write to us, we are online!