Other equipments and machines in bulk on Qoovee

Productivity up to 3000 etiquette / hour Installation cost depends on the configuration: Installation for applying polypropylene labels to PET containers. Savings on the label 3 times! Purpose of the product The labeling machine is designed to apply a ring, polypropylene label to a cylindrical gas-filled PET bottle. There is a visualization and control tool - a Weintek operator's touch panel. This solution makes it possible to visualize the technological process of labeling on the panel screen, provides quick access to the settings of the unit's operation parameters, and visualizes emergencies that have arisen in its operation. The extensive graphical capabilities of the operator panel make it possible to provide help sections for each parameter or alarm for maintenance personnel. The panel software provides for the possibility of combining several units into a SCADA system for centralized control of technological processes. The operation of the installation is controlled by a programmable logic controller (PLC) of its own design by the specialists of PraktikM. The PLC is based on a high-performance RISC microcontroller from ATMEL. The choice of a PLC solution in the form of its own design is due to the ability to provide it with the functions that are used in a particular installation. The existing solutions offered on the market are usually overloaded with unnecessary functionality, while they do not have the functions that are required for a specific control system. Then, to build the system, expansion modules are used, which overly complicate the design.

The EM-62 labeling machine is designed for applying a ring, polypropylene label to a gas-filled cylindrical PET bottle. For visualization and control of the process, there is an operator touch panel from KINCO. Productivity up to 6000 labels / hour The broad graphic capabilities of the operator panel allow: to present the technological process of labeling clearly on the panel screen, to provide quick access to the settings of the unit's operation parameters, to visualize emergencies that have occurred during its operation. find answers to questions in the help sections for each parameter or alarm for maintenance personnel. The operation of the installation is controlled by a programmable logic controller (PLC) of its own design by the specialists of PraktikM. Based on the wishes of customers, the necessary technical requirements for this equipment and the innovative solutions of our engineers and technicians, it was possible to ensure the following features of the operation of the installation: a sign-synthesizing indicator - all settings, parameters, indication of emergency situations are available without the operator panel! Parameter entry is offered in the form of a tree-like menu using its own eight-key keyboard. Automatic control of the temperature of the glue bath with notification of an accident when it (temperature) goes beyond unacceptable limits. Detection of a malfunction of the temperature sensor (thermocouple) of the glue bath with an alarm indication on the screen of the operator panel and PLC. Automatic switching on of its own drive of the glue bath when the set temperature is reached. This excludes the possibility of turning it on in an unheated state in order to avoid damage to the mechanisms of the glue bath. Protection of the temperature control system of tools (glue and cutting knives) from a short circuit or failure of their heating elements with an alarm indication on the screen of the operator panel and PLC. Protection against short circuit of the power supply channels of the pneumatic valve coils with alarm indication on the screen of the operator panel and PLC. Tracking the state of the transport conveyor (general shop or own). When the conveyor is turned off, the system works out this situation in order to avoid sticking a label on an unsuitable bottle with an alarm indication on the screen of the operator panel and PLC. Tracking the end or break of a roll of labels. Memorizing presets for reapplying. Maintainability of PLC due to the use of a widespread element base. Calculation and indication of the performance of the installation in real time, depending on the length of the labels and the settings of the frequency converter of the drive of the installation. Alarm indication of the frequency converter of the unit drive on the screen of the operator panel and PLC. Not only smooth acceleration, but also smooth drum braking (so as not to break the gearbox). Slow manual cueing for probe learning and tool manipulation. Sensor training (button on the panel). Additional input (or several) for the second (third) tag sensor with sensor selection on the panel. Setting frequencies, drum acceleration and deceleration time, frequency, acceleration and deceleration times in "slow" mode from the panel. Instant stop by STOP button (without deceleration). Jam sensor at the exit from the machine. Warranty 24 months.

If your organization is engaged in high-rise monolithic housing construction, external platforms will be an indispensable tool for your object. We are ready to provide you with any volume of the given cargo receiving equipment, in the stipulated time. Permanent platforms K-1.3 with metal flooring are mass production, therefore they are almost always available at the warehouse, with large volumes of deliveries, the equipment is ready for shipment from 3 to 5 working days. Remote platforms are delivered in full set. Remote platform K 1.3 with metal flooring is used in the construction of high-rise monolithic residential and industrial facilities. The portable platform is mounted in prem floor ceiling on the floor where it is necessary to receive cargo, it can be various construction and finishing materials, tubs with cement mortars, equipment and tools. Supply of cargo to the working surface of the portable platform is carried out by means of a tower crane. After the cargo is delivered to the site, workers can enter it. The portable platform is fastened with the help of special telescopic spacer racks, which are necessarily included in the kit of the supplied equipment, their number is 4 pieces. Fastening is carried out floor - ceiling, the length of standard telescopic racks is 2-3, 5 meters, if your building has high ceilings, then by request we will ensure the supply of fasteners with a greater height of extension. Specifications Loading capacity, kg 2500 Working platform, m 2.5x.2.2m Overall dimensions, m 4,8x2,3x1,4 Gross weight, kg 1000 Metal flooring

We supply modern high-performance canned milk filling lines for your business. We solve all the problems of organizing a new or modernizing an old condensed milk production. We will select the most cost-effective solution based on your capabilities and ultimate goals. We will draw up a layout plan taking into account the characteristics of your production facility. We will select technological equipment according to your terms of reference. At the same time, we produce all auxiliary equipment ourselves, which will save your budget by 30-60%, depending on the line configuration. We will launch the line and train your staff. You get: turnkey production. We guarantee: lower costs, higher productivity, modernization of business processes.   Video:   Natural condensed milk filling line   Condensed milk filling line   Equipment for the food industry "BESTEQ"   More details -

The line is designed for the production of canned fish without preliminary heat treatment (frying).

We supply modern high-performance canned meat production lines for your business. We solve all the problems of organizing a new or modernizing an old canned meat production. We will select the most cost-effective solution based on your capabilities and ultimate goals. We will draw up a layout plan taking into account the characteristics of your production facility. We will select technological equipment according to your terms of reference. At the same time, we produce all auxiliary equipment ourselves, which will save your budget by 30-60%, depending on the line configuration. We will launch the line and train your staff.   You get: turnkey production. We guarantee: lower costs, higher productivity, modernization of business processes.   Video:   Canned meat production line from BESTEK Engineering LLC for Velikoluksky MK   Line for the production of canned chicken meat for OJSC Agrofirma Oktyabrskaya ; Line for the production of stewed meat for the MPZ of the Moscow region   Equipment for the food industry "BESTEQ"   More details -  

Diaphragm dosing pumps NDR-2M were developed to replace the classic plunger pumps used in technological processes where leaks of the pumped medium are unacceptable. A distinctive feature and main advantage of diaphragm pumps is the complete tightness of the pumped liquid in relation to the environment. The seal in such a pump does not require maintenance during operation. Dosing diaphragm pumps of the NDR-2M series, manufactured at the Kharkov Pumping Plant, are designed for pumping liquids and suspensions, including toxic and aggressive ones. The presence of abrasive in the pumped liquid is not a problem for the diaphragm pump. The pumps are modular in design. Main units: drive, coupling, electric motor, hydraulic part. Supply - 6.9x10-6 (25) m3 / s (l / h); Pressure at the pump outlet, no more than - 40 (400) MPa (kgf / cm2) Electric motor power - 1.5 kW You can order equipment or its modernization, discuss the required configuration, get answers to your questions on request.

We offer Injection molding machine of the PD-208-KX series! Profitable! Specifications: • Model: PD-208 • Injection weight, gr: 531 • Injection volume, cm3: 577 • Form stroke, mm: 470 • Distance between columns, mm: 510 * 510 Parameters of the received products (boxes): • Dimensions, mm: 400 * 300 * 110 • Weight, kg: 0.205 • Execution: perforated • Material: polypropylene The price is indicated taking into account delivery to the Russian Federation, at the rate of $ 1 = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you

We offer a pallet production line! Profitable! This line uses waste wood, bamboo, shavings and furniture factory waste. The product is obtained through crushing, drying and the addition of glue, then all this is hot pressed. Features: • High temperature, high pressure, pallet pressing done in one go, standard size, no metallic material. • Pallets can be used in export packaging • Reasonable structure design, high performance. • According to European standard, biodegradability. • Waterproof, insect and termite resistant. • High strength, no deformation and can be reused. • Can be split from four directions, easy to use. • Storing on top of each other, economical, easy to transport. • Light weight, beautiful shape. The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

We offer an automatic contactless car wash complex! Profitable! The most modern, efficient and economical car wash complex. The only manufacturer that provides a 3-year warranty. The structure of the sink includes support racks, guide rails, head washer, built-in automatic drying system, decorative lighting, payment terminal, pump station, control cabinet, a set of sensors and connecting pipes. Specifications: • Installation length: 7600 mm • Mounting width: 3600 mm • Mounting height: 3350 mm • Dimensions of the pumping station: 1250 * 700 * 600 mm • Unit power: 380V / 22 kW, 50/60 Hz • Maximum current: 80A • Total power: 22 kW • Power of the pumping station: 18.5 kW / 15 kW • Power of drying fans: 20.5 kW (11000 Pa, 23000 m3 / h • Controller: Industrial controller • Water consumption: 65 l / car (express wash), 100 l / car (standard wash) • Shampoo consumption: 10-40 ml / machine • Wax consumption: 18.5 l for 1000 cars • Power consumption: 0.52 kW * h / machine (express wash), 0.99 kW * h / machine (standard wash) The price is indicated at the rate of 1 $ = 67.01 rubles. We deliver to the Russian Federation and the CIS countries. We will send a commercial offer upon request. For all questions, write and call - we will be glad to cooperate with you!

We offer a fuel system tester! Profitable! - Delivery was made in September to Kazakhstan, Ust-Kamenogorsk. Features: 1. Fuel pressure test 2. Fuel consumption test 3. Vacuum test on the intake manifold of the engine 4.back pressure in the exhaust test manifold 5. Different connectors are suitable for different car models Specifications: 1. Fuel pressure range: 0 ~ 800kpa 2.Fuel consumption range: 0.5 ~ 3L / min 3. Motor vacuum range: -100 ~ 0kpa 4. Back pressure range: 0 ~ 60kpa 5. Weight: 3.8 kg 6. Dimensions: 400mm x 315mm x 95mm Price including delivery to the Russian Federation, at the rate of $ 1 = 66.76. We will send a commercial offer upon request. We work directly with the manufacturing plant without intermediaries, without extra charges. For all questions, write and call - we will be glad to cooperate with you!

Installation "S-15" is designed for drilling water wells, geophysical, exploration, injection, horizontal wells. The rig can be equipped with a remote control panel that allows you to control drilling when the driller is in close proximity to the wellhead. It is possible to increase the mast to work with a pipe up to 3 meters. The high-quality color of the elements increases the corrosion resistance. Well drilling is carried out in a rotary way by flushing, blowing or lifting the destroyed rock to the surface with augers. The rig is designed for drilling wells in rocks of 1-9 drillability categories. When the unit is equipped with a hydraulic rotator of a geared design (maximum torque 2000, 4000 N / m), equipped with a drilling fluid supply unit for working with flushing or compressed air supply for working with a purge and with a pneumatic hammer, a swivel is not required (as in the URB). The unit can be equipped with a hydraulic auxiliary winch, hydraulic outriggers, mud pump and other equipment at the request of the customer. For ease of transportation, the "S-15" unit can be mounted on the basis of a car trailer. The installation can be placed on a category B trailer with its own OB vehicle, no re-registration with the traffic police is required. The unit is placed as a removable load. Specifications Parameter name The quantity OPERATIONAL Mach. Initial bit diameter, (mm) 300 Rock strength category nine Mach. Drilling length, (m) 100 Overall dimensions, mm: - Length - Width - Height 1000 800 3000 Installation weight, (kg) Module weight, (kg): - rotator - mast with feed mechanism - base - oil station 40 270 thirty 90

Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Three-plunger crank units and pumps ПТ and Т are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 to plus 200 ° С). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. Design The three-plunger crank unit consists of an electric motor and a pump mounted on a common frame. The pumps can be driven by an electric motor, combustion engine or diesel engine. The connection between the pump and the electric motor can be carried out through a V-belt transmission, through a gearbox or directly through a clutch. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Delivery - 8 m3 / h Pump outlet pressure 16 MPa Weight-660kg European quality-Ukrainian price!  

Three-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of no more than 800 mm2 / s (8 St) with a temperature, depending on the version, from 243 K to 473 K (from minus 30 up to plus 200 ° C). The permissible content of solid non-abrasive particles in the pumped liquid is not more than 0.2% by mass, the permissible dimensions are not more than 0.2 mm. Pumps and units are used in industries requiring high pressures, including explosion and fire hazardous ones (for example, hydraulic cleaning of technological equipment). It is also used as feed pumps for mobile steam generating units. The three-plunger pump consists of a drive and hydraulic parts. The drive end contains a crankshaft for converting the rotational motion of the engine into the reciprocating motion of the plungers. The hydraulic part consists of a valve body, plungers, stuffing box seals, suction and discharge valves, a safety valve. The safety valve is adjusted to the nominal working pressure, and if necessary, the valve can be adjusted to a different pressure. The units can be connected to devices that regulate the engine speed. Flow rate - 4.0-10 m3 / h Pump outlet pressure 10 MPa 1 year manufacturer's warranty! Order European quality at Ukrainian prices!  

Plunger metering pump units ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a solid non-abrasive phase concentration of not more than 10% by mass, with a maximum particle density of up to 2000 kg / m3, with a grain size of a solid non-abrasive phase no more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Technical characteristics of the pump НД 25/400 К 14: Feed-25 l / hour; The pressure at the outlet of the pump is 400 kgf / cm2; Hydraulic part K - steel 12Х18 Н10 Т Order a Ukrainian pump ND from the KhNZ Trading House!

Plunger metering pumps ND are intended for volumetric pressure metering of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 • 10-7 to 8.5 • 10-4 m2 / s (from 0.0085 to 8.5 cm2 / s), with a temperature from 258 to 473 K (from -15 to +200 ° C), with a concentration of a solid non-abrasive phase of not more than 10% by mass, with a maximum density of particles up to 2000 kg / m3, with a grain size of a solid non-abrasive phase not more than 1% of the nominal bore diameter of the inlet pipe. The area of application of the units (pumps) is determined by the resistance of the material from which the hydraulic part is made, as well as the resistance of the seal material. On the basis of metering pumps, the following installations are manufactured: one-component metering (UND) for metering supply to gas and oil field lines and objects of corrosion inhibitors, paraffin and scale deposits, demulsifiers and other products; multicomponent (up to 6 components at the same time) dosing (UMD) for simultaneous feeding into the technological line of a dosed amount of liquids or liquid mixtures, emulsions and suspensions with a temperature from 258 to 373 K (from -15 to +100 ° C). Multi-plunger units can provide the supply of liquids both separately by each cylinder and together in various combinations both at the inlet and outlet. Specifications: Feed-25 l / hour; Discharge pressure-250 kgf / cm2; Execution of the hydraulic part K - steel 12 X 18 H10T; Order time-tested quality!

A little about us: The main activity of Sohtorik Makina is the manufacture of equipment for the manufacture of sanitary and hygienic products. The range of the company includes machines for the production of napkins of all formats with and without printing, traditional 1/4 fold and napkins for dispensers L-fold, as well as toilet paper, paper towels, Z-fold sheet towels, equipment for the production of cores and much more! Sohtorik Makina has been manufacturing this equipment for many years since 1994. It is proud of its equipment, accumulated experience and some patented technical solutions. All Sohtorik Makina equipment compares favorably with high reliability, high-quality materials and time-tested components of well-known brands. Sohtorik Makina's existing lineup is ideal for START-APP projects and medium to large sized companies with a high degree of diversification and differentiation of production. We are pleased to present to your attention one of these machines: Dispenser Napkin Machine, L fold. This equipment is designed for the production of paper napkins with a format of 170 * 210 mm (can be changed at the request of the client). Productivity - 1400 sheets per minute. It is also possible to install a printing unit on this model for applying a logo with one color. Main motor power - 3kw, band saw power - 1kw. Dimensions: Width - 130 cm, Height - 140 cm, Length - 270 cm, Weight - 1,700 kg. The kit includes a knot for packing in a plastic or paper sleeve. The price of this equipment depends on the configuration and format. and starts at $ 28,000. Link to video: G A R A N T I Z 1 Y O D !!!

A little about us: The main activity of Sohtorik Makina is the manufacture of equipment for the manufacture of sanitary and hygienic products. The range of the company includes machines for the production of napkins of all formats with and without printing, traditional 1/4 fold and napkins for dispensers L-fold, as well as toilet paper, paper towels, Z-fold sheet towels, equipment for the production of cores and much more! Sohtorik Makina has been manufacturing this equipment for many years since 1994. It is proud of its equipment, accumulated experience and some patented technical solutions. All Sohtorik Makina equipment compares favorably with high reliability, high-quality materials and time-tested components of well-known brands. Sohtorik Makina's existing lineup is ideal for START-APP projects and medium to large sized companies with a high degree of diversification and differentiation of production. Z Fold Towel Machine: This equipment is designed for the production of paper towel format 215/75 mm (folded), fold (Z) - 1/3 parts. The capacity is 1200 full format sheets per minute, which equals to 3600 sheets per minute in 215/225 mm size. Also on this model it is possible to install a printing unit for applying a logo. Main motor power - 7.5 kw, lamination motor power: 0.75 kw., Vacum 1: 5.5 kw - a / c Vacum 2: 3 kw - a / c Dimensions: Width - 125 cm, Height - 170 cm, Length 350 cm.Weight: 2000 kg Format: maximum 640 mm. Embossing-lamination unit: Doctor Blade The price of this equipment depends on the configuration and format. and starts at $ 66,000. Link to video: G A R A N T I Z 1 Y O D !!!

A little about us: The main activity of Sohtorik Makina is the manufacture of equipment for the manufacture of sanitary and hygienic products. The range of the company includes machines for the production of napkins of all formats with and without printing, traditional 1/4 fold and napkins for dispensers L-fold, as well as toilet paper, paper towels, Z-fold sheet towels, equipment for the production of cores and much more! Sohtorik Makina has been manufacturing this equipment for many years since 1994. It is proud of its equipment, accumulated experience and some patented technical solutions. All Sohtorik Makina equipment compares favorably with high reliability, high-quality materials and time-tested components of well-known brands. Sohtorik Makina's existing lineup is ideal for START-APP projects and medium to large sized companies with a high degree of diversification and differentiation of production. We are pleased to present to your attention one of these machines: Equipment for the production of cardboard core (BOBIN MACHINE): This equipment is designed for the production of cardboard cores of various diameters. Productivity: 12 meters per minute. Maximum number of layers: 4pcs. Sleeve inner diameter: 20 - 70 mm Installation roll width max: 50 - 85 mm Installation roll diameter max: 1200 mm Main engine power - 2.2 kw, Dimensions: Width - 3900 cm, Height - 140 cm, Length - 4000 cm, Weight - 850 kg. The bushing diameter varies depending on the application. The price of this equipment: $ 15500. G A R A N T I Z 1 Y O D !!!

A little about us: The main activity of Sohtorik Makina is the manufacture of equipment for the manufacture of sanitary and hygienic products. The range of the company includes machines for the production of napkins of all formats with and without printing, traditional 1/4 fold and napkins for dispensers L-fold, as well as toilet paper, paper towels, Z-fold sheet towels, equipment for the production of cores and much more! Sohtorik Makina has been manufacturing this equipment for many years since 1994. It is proud of its equipment, accumulated experience and some patented technical solutions. All Sohtorik Makina equipment compares favorably with high reliability, high-quality materials and time-tested components of well-known brands. Sohtorik Makina's existing lineup is ideal for START-APP projects and medium to large sized companies with a high degree of diversification and differentiation of production. Cutting Machine: Main motor power - 3.5 kw, Dimensions: Width - 120 cm, Height - 200 cm, Length 200 cm.Weight: 900 kg Price 6000 $ G A R A N T I Z 1 Y O D !!!

machine profi 4m for artistic forging

professional series machines for artistic forging