All Road Construction Machines & Equipments suppliers from Ukraine

Artificial road unevenness - speed bump LP650 - Eurostandard. = Speed ​​bumps are made of black rubber with reflective elements made of 3M ™ Stamark ™ A 650 series polymer tape on top. Speed ​​bumps are anchored to the road surface, asphalt. = Specifications of the Speed ​​Bump: Main section: IDN-650 650x500x52 mm. Side section: IDN-650 650х315х52 mm. The weight of the main section LP650 is 13.5 kg. The weight of the side section LP650 is 5.25 kg. = Withstands a load weight of 110 tons. = Our enterprise produces two types of speed bumps LP500 and LP650. IDNs are installed near schools, higher educational institutions, kindergartens, hospitals, and other places near which there is a large flow of vehicles, as well as where increased caution is needed on the roadway, including near pedestrian crossings. = There is a quality certificate from TUV SUD Management Service GmbH, ISO 9001: 2008 = Our company is a manufacturer of speed bumps, you can also order the installation of IDN. = Manufacturing. Installation. Contract. Warranty. Sending across Ukraine and other regions. = For detailed information about our products and services, see our website. = Contact us - we are ready to cooperate!

Artificial road bump "Speed ​​bump" LP500. = Speed ​​bumps are made of black rubber with reflective elements made of 3M ™ Stamark ™ A 650 series polymer tape on top. Speed ​​bumps are anchored to the road surface, asphalt. = Specifications of the Speed ​​Bump: = Police recumbent LP500: Main section: LP500 500x500x50 mm. Side section: LP500 250x500x50 mm. Main section weight 8.71 kg. Side section weight 2.65 kg. = Withstands a load weight of 110 tons. = Our enterprise produces two types of speed bumps LP500 and LP650. IDNs are installed near schools, higher educational institutions, kindergartens, hospitals, and other places near which there is a large flow of vehicles, as well as where increased caution is needed on the roadway, including near pedestrian crossings. = There is a quality certificate from TUV SUD Management Service GmbH, ISO 9001: 2008 = Our company is a manufacturer of speed bumps, you can also order the installation of IDN. = Manufacturing. Installation. Contract. Warranty. Sending across Ukraine and other regions. = For detailed information about our products and services, see our website. = Contact us - we are ready to cooperate!

Wheel stop rubber, parking (590x120x90mm) = Technical characteristics of the wheel stop: Length: 590 mm. Width: 120mm. Height: 90 mm. Weight: 3.110 kg. = Rubber parking wheel bumpers are mainly used to form the parking space of a parking lot, in parking complexes, a gas station or other facility where there is a need to create traffic logistics and at the same time to highlight clear boundaries of parking spaces. = The wheel guard on the sides is pasted over with a special wear-resistant reflective, polymer tape 3M ™ Stamark ™ A 650 series, for additional attention of drivers and better visibility in low light at night. = Such wheel bumpers are made from high-quality rubber compounds. They are made in the form of a trapezoid 590 mm long, with a height of 90 mm, and a base whose width is 120 mm. The trapezoidal wheel protectors can withstand the load of vehicles weighing up to 3.5 tons. Resistant to temperature extremes (operating range from -40 to +50 C). = These wheel bumpers are auxiliary road barriers that serve to ensure the passive safety of vehicles and buildings, as well as to separate parking spaces. = Call us! We will always be happy to answer your questions, advise in detail about the product, the price, and, of course, draw up a purchase order. Manufacturing. Contract. Warranty. Sending across Ukraine and other regions. There is a quality certificate from TUV SUD Management Service GmbH, ISO 9001: 2008. = For detailed information about our products and services, see our website. Contact us - we are always ready to cooperate!

Rubber wheel stop, parking curb, wheel stops - 610x145x120mm. = The rubber stopper is a special trapezoidal fence, the canvas fixed on a flat surface. Designed to restrict the entry of vehicles, protect structures or vehicles from damage during movement or a possible collision in parking lots. = Such wheel bumpers are made from high-quality rubber compounds. They are made in the shape of a trapezoid with a standard height of 12 cm, and the base of which is 14.5 cm wide. = For additional driver attention and better visibility in low-light conditions at night, a special wear-resistant 3M ™ Stamark ™ A 650 Series reflective polymer tape is applied to the wheel protector. = The design of the bump stop consists of a middle and two end elements. If necessary, its length can be increased by additional middle elements. = Technical characteristics of the wheel stop: Section length is 610 mm. Section width 145 mm. Section height 120 mm. Center section weight 6.62 kg. Side section weight 6.4 kg. = Possible functionality of the wheel stop: = separation of parking spaces; marking the boundaries of the parking lot; fencing the pedestrian zone and cycle paths from the roadway; protection of buildings and their structural elements from accidental collisions of vehicles; separation of car streams. = Trapezoidal wheel protectors can withstand the load of vehicles weighing up to 3.5 tons. Resistant to temperature extremes (operating range from -40 to +50 C). Wheel bumpers are installed on a hard surface using anchor bolts. = Manufacturing. Installation. Contract. Warranty. Sending across Ukraine and other regions. There is a quality certificate from TUV SUD Management Service GmbH, ISO 9001: 2008. = For detailed information about our products and services, see our website. Contact us - we are always ready for cooperation

Corner rubber protection - a corner parking damper, a rubber bump stop (rubber corner), which protects vehicles from collisions against the corners of walls and columns of buildings, thereby protecting them from unwanted consequences, damage caused by these actions. Product dimensions: Length: 785 mm. height: 68 mm. corner width: 88 mm. width between corners: 110 mm. wall thickness of protection: 10 mm. Weight: 1,600 kg. Rubber protection (corner parking damper) for walls reliably protects the surface of buildings and vehicles. Bright reflective stripes of 3M ™ Stamark ™ A650 Series polymer tape are applied to the wall fenders for better visibility at night. Fastening is made by anchoring to building facades and any other surfaces that need protection. Corner guards for walls and columns are made of high quality rubber compounds. Corner bumpers reliably protect corners from impacts, eliminating damage to vehicles and building structures. Manufacturing. Contract. Warranty. Sending across Ukraine and other regions. There is a quality certificate from TUV SUD Management Service GmbH, ISO 9001: 2008. For detailed information about our products and services, see our website. Contact us - we are always ready to cooperate!