Road Construction Machines & Equipments in bulk on Qoovee

his series of products is made of aluminum alloy material with light weight, excellent anti-seismic and high heat exchange efficiency.

Technical data + supply Pin 1 - common Pin 2 Accuracy, max. [±FS%] 1 % Accuracy, typical [±FS%] 0.5 % Adj. zero point and span No Ambient temperature range [°C] [max] 85 °C Ambient temperature range [°C] [min] -40 °C Ambient temperature range [°F] [max] 185 °F Ambient temperature range [°F] [min] -40 °F Approval ATEX Approval comments ATEX Ex ec IIA T4 Gc Autofrettage Pressure 1600 bar China RoHS compliance Yes exceed limitations Compensated temp. range [°C] [max] 80 °C Compensated temp. range [°C] [min] 0 °C Compensated temp. range [°F] [max] 176 °F Compensated temp. range [°F] [min] 32 °F EEE category 5 small equipment (any external dimension 50 cm) Electrical conn. Male/Female Male and Female Electrical connection Angular connector Electrical connection size Pg 9 Electrical connection standard EN 175301-803-A Enclosure rating IP IP65 EU RoHS compliance Yes with exemptions EU RoHS exemption clause No Flush diaphragm No High Clipping Level 22.4 In scope of WEEE Yes In scope of WEEE and contain batteries No International Article Number 5702423064465 Intrinsically safe No Low Clipping level 3.6 Medium temperature range [°C] [max] 85 °C Medium temperature range [°C] [min] -40 °C

GM05,GM1,GM2,GM3,GM5,GM6,GM7,GM9 SAI of GM series Hydraulic Piston Motor, range GM05, GM1, GM2, GM3, GM5, GM6, GM7, GM9 for drilling rig motor, widely applied in hydraulic and transmission systems of plastics machinery, light industrial machinery, heavy type metallurgical machinery, for drilling rig  petroleum and coal mining machinery, lifting and transportation equipment, ship's deck machinery, geological prospecting equipments, etc.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Pilot Configuration Bleed through Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 2.3:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure See Technical Features Pilot Configuration Sealed Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 25 psi Operating Characteristic Semi-restrictive Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Model Weight 0.27 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 4.5:1 Maximum Recommended Load Pressure at Maximum Setting 3850 psi Maximum Setting 5000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 10 gpm Pilot Ratio 3:1 Maximum Recommended Load Pressure at Maximum Setting 3075 psi Maximum Setting 4000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Adjustment - No. of CCW Turns from Min. to Max. Setting 3.75 Operating Characteristic Semi-restrictive Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.35 lb.

Cavity T-11A Series 1 Capacity 15 gpm Pilot Ratio 5:1 Maximum Recommended Load Pressure at Maximum Setting 4615 psi Maximum Setting 6000 psi Factory Pressure Settings Established at 2 in³/min. Maximum Valve Leakage at Reseat 5 drops/min. Check Cracking Pressure 40 psi Adjustment - No. of CCW Turns from Min. to Max. Setting 5 Operating Characteristic Standard Reseat >85% of setting Valve Hex Size 7/8 in. Valve Installation Torque 30 - 35 lbf ft Adjustment Screw Internal Hex Size 5/32 in. Locknut Hex Size 9/16 in. Locknut Torque 80 - 90 lbf in. Model Weight 0.44 lb.

Technical Data  Series 0 Cartridge Thread M16 Valve Hex Size 3/4 in. Valve Installation Torque 20 - 25 lbf ft Cavity T-162A What models can this kit be used with? CDAP Mechanically operated, back-to-back check valve CDAQ Mechanically operated, back-to-back check valve CNAC Fixed-orifice, non-pressure compensated, flow control valve with reverse flow check CNBC Free flow nose to side check valve with bypass orifice CSAN Insert style, single ball shuttle valve with signal at port 2 CSAW Single ball shuttle valve with signal external CSAY Single ball shuttle valve with signal at port 2 CXAD Free flow side to nose check valve CXBA Free flow nose to side check valve CXBG Flush mount, free flow nose to side check valve CXBM Insert style, free flow nose to side check valve DFBD FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBE FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1, 3000 psi (210 bar) DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1 DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve FCBB Fixed-orifice pressure compensated flow control valve with reverse flow check FPBD FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBE FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1 FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 FPBM FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar) FPBN FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar) FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed FQBA Fixed-orifice, flow fuse valve FXBA Fixed-orifice, pressure compensated flow control valve NCBB Fully adjustable needle valve with reverse flow check NFBC Fully adjustable needle valve RDBA Direct-acting relief valve RPCC Pilot-operated, balanced piston relief valve RQCB Kick-down, pilot-operated, balanced piston relief valve XZCA All ports blocked cavity plug XZCC Flush mount, all ports blocked cavity plug XZOA All ports open cavity plug XZOC Flush mount, all ports open cavity plug  

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC) Arc Suppression (TVS) Included Power Consumption (cold) - at rated voltage 22 watts Maximum Ambient Temperature 122 °F Voltage/Frequency 24 VDC Operating Voltage Range +/- 10% nominal Duty Cycle Rating 100 % Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin Connector Environment Rating IP65/IP67 Solenoid Tube Diameter .75 in. Coil Nut Torque 4.5 lbf in. Model Weight 8.2 oz.

Geotextile Geo landscape is a woven fabric produced using special technologies from polypropylene threads. This is a multifunctional material for solving problems in industrial and civil construction, as well as on a personal plot. The purpose of using Geo Landscape is to improve the quality of construction and increase the service life of the structure several times. Types of winding Roll 1.6✕25 m (40 sq. m) Roll 1.6✕50 m (80 sq. m) Roll 2.1✕50 m (105 sq. m) Roll 4.2✕110 m (462 sq. m)

✔️1 Jumbo: 1 MT = 1000 Kg ✔️1 Bulk Carrier = 3000 MT ✔️Full Customization Available ✔️Customized Packaging Available ✔️We choose thick bag material. ✔️Available Private Label

We sell silcoma concrete mixer, professionally manufacture concrete mixing plant wear parts, SICOMA mixer wear parts, BHS mixer wear parts, shaft head seals, cement screw conveyor, crusher wear parts, custom size wear parts.

Topographic (geodesic) tablet - a sheet of paper glued to the base and intended for graphic constructions in the production of topographic surveys. Tablets differ in their size and base: lavsan film, or more rigid aluminum or plastic. Topographic geodetic tablets can be supplied with or without markings. Topographic tablet (540 x 560 mm) Topographic tablet (570x840 mm) Topographic tablet (600x600) mm.

Production of road signs. Delivery, installation across RK.

Deicing & Road Salt from Egypt (Sinai, Siwa, Alexadria) 1 Jumbo: 1 MT = 1000 Kg 1 Bulk Carrier: 3000 MT 35 % advance payment, 65% against scan copy of shipping documents. 

Landover AIR Cooling Tower Unit HVAC Chiller Tower Series 10000 System  Condition of the goods: You will receive full transparency on the individual products, their condition, product prices and informative photos. The goods are in good condition and are visually inspected and classified in category A, B and C.   Minimum purchase: Individual trucks will be made up for you. The price quoted is a truck average price, therefore the price will vary depending on your selection.   Household goods: Consumer Electronics: Computer Appliances: Electric Electrical Cameras, Laptops, Mobile Phones, Drones, Graphics Cards, Motherboards, Video Games, Antminers, Dishwasher, freezer, cookers, fridge/freezer, oven, dryer, washing machine.   Top Brands: Apple,Sony,Panasonic,Heir Thermocool,MSI,Gigabyte,AMD,AEG, Bosch, Bauknecht, LG, Neff, Samsung, Siemens.   Appointment: After making an appointment, you are welcome to visit our warehouse in Nuremberg at any time and convince yourself of our high quality.   Contact: For further details, please send us your contact details as a message, or contact us by phone. We look forward to a successful cooperation. OHIO, USA

Lighten Traffic道路标线机（路面标线机）是道路标线的专用设备。用于高速公路、道路轴线、车道线、社区、机场等。标记各种具有反射性的热塑性或冷线，如直线、虚线、曲线、箭头和字母。

The switch is wireless, battery-free, wave principle of operation up to 100 meters. Works through the application from a smartphone. The final amount with VAT is 2050 rubles. / set: one-button switch + relay / breaker). Price for 100 sets. Excluding delivery. An innovative product

“SA International” - Shanghai Asia International Electrical & Mechanical Co., LTDispart of theSIBC Group, which has been providing equipment and technology selection services in various fields since 2017.   -   Construction.- Road construction.- Metallurgy.- Mining.- Chemical industry.- Production lines for various purposes.   We are trusted by clients in Europe, USA, Canada, Malaysia, India, South Korea, Russia, Thailand. The company " SA International " has an official representative office on the territory of the Russian Federation, in the city of Krasnodar to simplify cooperation, document circulation and customs clearance for our clients. Cooperating with our company, you can be confident not only in the quality of the supplied equipment, but also in the after-sales service.    We provide:   - Machinery and equipment for the construction industry, such as:Asphalt concrete plants / plants (ABZ), concrete mixing plants / plants (BRU / RBU), self-propelled concrete mixers with self-loading function, concrete pumps, lines for the production of tiles and blocks, etc.   - Equipment for mining: crushers, screens, screens, conveyor belts, pumps, etc.   - Alligator scissors and metal presses.   - Cargo and wheeled vehicles: loaders, excavators, bulldozers.   - Storage equipment.   - DES and electric motors.   - Chemical reagents and components.   Also, "SA International" is a manufacturer of conveyor belts.   Over the years of working with factories in China, we have earned a reputation as a reliable partner and a center of excellence for quality assessment among our customers. Our managers will conduct a full market assessment, advise you on all emerging issues, provide complete information as soon as possible, and engineers will monitor the entire production process to minimize the percentage of defects and will train your staff.   An additional advantage of working with us will be that the managers of "SA International" know all the logistics processes, offer competitive prices and the shortest delivery times.

Special equipment from Japan.

Thanks to new developments and modifications in the concrete technologies, the company SUMAB modified a Special mixing plant for producing of cold asphalt! Totally new generation of equipment from the Swedish manufacturer SUMAB! Get your business a new inspiration with our mobile cold asphalt mixing plant! A unique offer on the market! Be the first in your region to get this special equipment! SUMAB will help you to organise your new business!   Cold asphalt mix is now possible with the SPECIAL Cold asphalt mixing plant SUMAB ES-15.   Special modified cold asphalt mixers SUMAB ES-15: On a container frame, 2 aggregate storages x3,5 m3. Weighting sensor. Pan mixer 750/500 liters. Water tank DANFOSS, 250 liters. PLC SIEMENS. Belt conveyor 2 m Karcher We can offer a cold asphalt mixing plants of different capacity from 15 to 80 m3 per hour. If You want to get more information about special cold asphalt mixer ES-15, or You are interested in technology of cold asphalt mix producing, please, send request to our company.   Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

Diamond discs on asphalt When repairing roads, situations often arise when it is necessary to remove the asphalt layer. Nowadays a very convenient diamond cutting technology is used for this. It is carried out using special cutters and diamond segment discs on the asphalt. These cutters are mostly gasoline powered and not dependent on electricity. This makes them mobile. In addition, they are equipped with a guide wheel, which allows you to cut straight lines without extra effort.

Double Rotary Leveling Shovel

Good day,Enterprise MUKA MAK İ NA İ N Ş AAT SAN. Ve Tic. A.Ş. In the person of the General Director Emre Kaya which is located in the city of Samsun Turkey, has faithfully served the crushing and screening machinery industry for 30 years, asks you to provide competent assistance in finding partners in Russia and the CIS countries, specializing in the production and processing of nonmetallic materials (mines, quarries), concrete, as well as road construction. Thus, we plan to develop trade relations in Russia and the CIS countries. We hope that you will not refuse to support us, and we look forward to your response.   With respect Alikhan Suleimanov Export Sales Manager

Good day,Enterprise MUKA MAK İ NA İ N Ş AAT SAN. Ve Tic. A.Ş. In the person of the General Director Emre Kaya which is located in the city of Samsun Turkey, has faithfully served the crushing and screening machinery industry for 30 years, asks you to provide competent assistance in finding partners in Russia and the CIS countries, specializing in the production and processing of nonmetallic materials (mines, quarries), concrete, as well as road construction. Thus, we plan to develop trade relations in Russia and the CIS countries. We hope that you will not refuse to support us, and we look forward to your response.   With respect Alikhan Suleimanov Export Sales Manager